Re: [Elecraft] 'Q' signal trivia
I'm surprised no one has mentioned this... 73 means "best regards" and is sufficient without an "s". If you say "73s", it is like saying, "best regards's". However, I admit that it has become rather common practice in recent times. 73, Greg-N4CC Msg sent via CableONE.net MyMail - http://www.cableone.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Variable Bandwidth Filters
What ever happened to the idea of the variable bandwidth filters? Is that a dead subject? 73 de Greg-N4CC Msg sent via CableONE.net MyMail - http://www.cableone.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Variable Bandwidth Filters
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Sell: LP-Pan and E-mu 0202 sound card
Looking for $250 + postage for the pair from Jacksonville, FL area. 73 de Greg-N4CC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 6M Preamp
The 6M preamp is now on the order page...just ordered mine... :-) 73 de Greg-N4CC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: [Elecraft_K3] K3 vs FT1000D
I've had a FT-1000D since the early 90's...the only change I've made is I got rid of an older one and got a newer one that was cosmetically prettier. It is still on the desk. I intend to keep both radios...so I'm not prejudiced for one radio versus the other because of the one I have sitting on the desk. I have done A/B tests with both radios...and I can honestly tell you that I have worked two very weak stations on the K3 that I could not work on the 1000D because I could copy them on the K3 and not the 1000D. I could tell the signal was there but it was not intelligible -- one on 20 meters and one on 40 meters...switching the same antennas back and forth between the two radios. Pluses for the 1000D -- Yes, the feel of the knob is nicer. I like the APF for cw work on the 1000D. The sound of the radio in the speaker is fuller than the K3 with the RX equalizer set "flat" on the K3. I can make them sound almost identical by adjusting the RX equalizer on the K3. The 1000D is 200 watts. The 1000D has "band buttons". The 1000D has a real analog meter...I happen to prefer that. Pluses for the K3 -- It is easier to move around on the desk and get plugs in and out of the back; The selectivity / DSP in the K3 is a WOW! compared to the shift/width control on the 1000D; the tx test mode on the K3 is handy for adjusting things without actually transmitting a signal; the cwt and auto spot feature is pretty slick; it will be nice when they have the DVR available; I like the way the RIT and XIT CLR button works. You get new features every time Elecraft responds to a new "wish list" item; the ability to remember power levels by band is unique and I find it very useful. I think I get less blocking with the K3 from loud local than I do on the 1000D -- that's perception, not measurement. The K3 has 6 meters on it. The K3 can be adjusted to low power levels much more accurately and lower than the 1000D. If I were going to keep one and get rid of the other, my vote would be to keep the K3...but both radios are very nice. YMMV. As far as I'm concerned there is one more factor that is overwhelmingly in favor of Elecraftthe customer servicenot to mention that if I have to send a radio in for service the 1000D weighs in right at 70 lbs while the K3 would be 10 or less with all the packing...The chance of UPS crunching your 1000D is far greater than crunching the K3 if F=MA is still true...:-) (OK all you physicists can tell me why that is incorrect...I'm too old and too crotchety to care any more.) 73 de Greg-N4CC At 07:47 AM 9/10/2008, Chris Parnell wrote: H as funny as that may be (and it is... :) )... anyone got any decent views on this request please? Chris On 10/09/2008, at 10:56 PM, G4MKP wrote: Thanks mate! Im also available for Character Witness appearances in most court case . Ok then, the VFO knob on the K3 is crap compared to the 2000. Cheers, Terry G4MKP -- From: [EMAIL PROTECTED] [<mailto:Elecraft_>mailto:[EMAIL PROTECTED] Behalf Of Simon Brown (KNS) Sent: 10 September 2008 11:42 To: [EMAIL PROTECTED] Subject: Re: [Elecraft_K3] K3 vs FT1000D The Elecraft award for the best marketing slogan of 2008 goes to... Terry! Simon Brown, HB9DRV <http://www.ham-radio-deluxe.com>www.ham-radio-deluxe.com - Original Message - From: <mailto:[EMAIL PROTECTED]>G4MKP After switching on the K3 for the first time, the next time I switched on the 2000 was to demonstrate it to the buyer when I sold it. __._,_.___ <http://groups.yahoo.com/group/Elecraft_K3/message/2202;_ylc=X3oDMTM1MXRwamdrBF9TAzk3MzU5NzE0BGdycElkAzIwMTQ5NDI4BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMyMjA4BHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTIyMTA0NzI1NAR0cGNJZAMyMjAy>Messages in this topic (7) <http://groups.yahoo.com/group/Elecraft_K3/post;_ylc=X3oDMTJxOGEwNThjBF9TAzk3MzU5NzE0BGdycElkAzIwMTQ5NDI4BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMyMjA4BHNlYwNmdHIEc2xrA3JwbHkEc3RpbWUDMTIyMTA0NzI1NA--?act=reply&messageNum=2208>Reply (via web post) | <http://groups.yahoo.com/group/Elecraft_K3/post;_ylc=X3oDMTJmczlhMzBmBF9TAzk3MzU5NzE0BGdycElkAzIwMTQ5NDI4BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzEyMjEwNDcyNTQ->Start a new topic <http://groups.yahoo.com/group/Elecraft_K3/messages;_ylc=X3oDMTJmYWszcmI5BF9TAzk3MzU5NzE0BGdycElkAzIwMTQ5NDI4BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNtc2dzBHN0aW1lAzEyMjEwNDcyNTQ->Messages | <http://groups.yahoo.com/group/Elecraft_K3/files;_ylc=X3oDMTJnNzY0YmJnBF9TAzk3MzU5NzE0BGdycElkAzIwMTQ5NDI4BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNmaWxlcwRzdGltZQMxMjIxMDQ3MjU0>Files | <http://groups.yahoo.com/group/Elecraft_K3/photos;_ylc=X3oDMTJmZDdsbzI2BF9TAzk3MzU5NzE0BGdycElkAzIwMTQ5NDI4BGdycHNwSWQDMTcwN
Re: FW: [Elecraft] K3 and StepIR/Icom PW-1
Adam -- I guess it depends on the user. Certainly having the ALC connected (if it were compatible) would be preferred...but my point is that saying " the K3 should not be used as an exciter for the PW-1" [without ALC] is not entirely accurate. it is possible to use the PW-1 without ALC. It can be done and done quite safely. Granted you lose a measure of protection but if you use the K3 as I do -- where it recalls the drive setting by band, a unique feature of the K3 -- it is less likely that not having the ALC connected will ever be an issue. If you change the power settings frequently and are not careful to return them to the desired drive level when operating the amplifier then your chance of damaging the amp increases without the ALC. Cheers. 73 de Greg At 10:53 PM 9/7/2008, you wrote: Hi Greg, The PW1 uses the ALC loop as an essential part of its protective subsystem, as described in the service manual excerpt which I sent you. Any one of several anomalous operating conditions (including over-drive and load mismatch) will pull down the ALC line to reduce the drive. This is the amplifier's first line of defence. I would never put an expensive piece of equipment such as the PW1 at risk by connecting it to an exciter without a fully-functional ALC loop. Cheers for now, 73, Adam VA7OJ/AB4OJ -Original Message----- From: Greg - N4CC [mailto:[EMAIL PROTECTED] Sent: 7-Sep-08 19:05 To: Adam Farson Subject: Re: FW: [Elecraft] K3 and StepIR/Icom PW-1 I'm using the K3 with a PW-1 and the beauty of it is you don't need the ALC if you use the K3's capacity to store the power level (drive level) for each band. Obviously if you use the K3 barefoot at 100 watts you would have to be careful to turn it back down with the amp but I just leave it at the saved settings that I have established for output for each band. The proper drive level does vary somewhat by band. You are right about the ALC ..the K3 ALC is not compatible with the PW-1 and you should not connect the ALC line between the two. 73 de Greg At 09:08 PM 9/7/2008, you wrote: > Hi Tom, > >The K3 should not be used as an exciter for the PW1 unless the polarity >of its external ALC input has been changed from positive-going >(original) to negative-going (range 0 to -4V). Failure to heed this >warning will result in extensive damage to the PW1, necessitating >costly repairs (as much as >$1800!) > >http://www.ab4oj.com/icom/main.html#alc > >Cheers for now, 73, >Adam VA7OJ/AB4OJ > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: FW: [Elecraft] K3 and StepIR/Icom PW-1
I'm using the K3 with a PW-1 and the beauty of it is you don't need the ALC if you use the K3's capacity to store the power level (drive level) for each band. Obviously if you use the K3 barefoot at 100 watts you would have to be careful to turn it back down with the amp but I just leave it at the saved settings that I have established for output for each band. The proper drive level does vary somewhat by band. You are right about the ALC ..the K3 ALC is not compatible with the PW-1 and you should not connect the ALC line between the two. 73 de Greg At 09:08 PM 9/7/2008, you wrote: Hi Tom, The K3 should not be used as an exciter for the PW1 unless the polarity of its external ALC input has been changed from positive-going (original) to negative-going (range 0 to -4V). Failure to heed this warning will result in extensive damage to the PW1, necessitating costly repairs (as much as $1800!) http://www.ab4oj.com/icom/main.html#alc Cheers for now, 73, Adam VA7OJ/AB4OJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 firmware latest public release...is it 2.02
One more point...why WOULDN'T you load a Beta release? In the very worst case, you won't like something about it and can always load the latest public release or reinstall a previously saved configuration. You can't lose. 73 de Greg-N4CC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] v2.33 Beta bug at SSB-Filter shift?
Yes...I see that as well...73 de Greg-N4CC At 01:15 PM 8/29/2008, DC1RS wrote: When use the filter shift at either USB or LSB and return it to center frequency it says FC *0.03, sometimes *0.04, *0.05 and *0.40. All other positions are indicated correct and the received audio also sounds ok at center position. I reloaded the firmware v2.33 again, still the same problem. Is there anyone with the same problem? 73 de Roland, DC1RS -- View this message in context: http://n2.nabble.com/v2.33-Beta-bug-at-SSB-Filter-shift--tp792654p792654.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Paddle for K3
Didn't realize Heisenluft was on the reflector...It's August ... not April...but chuckled at both the posts... 73 de Greg (by the way, my old analog paddle works fine with the K3) At 09:20 AM 8/8/2008, you wrote: -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of n4lq BTW: I find that my Windom antenna works better on CW than on SSB. Could this the short and long halves of the antenna be the cause? = Well, yes, here's why! You'll find that if you switch to "ALT" in SSB the Windom performance matches that on CW. Likewise, if you switch to "CW REV" mode, the Windowm performance is down. This is of course, determined by the polarity of your Windom feedline (whether the coax center or shield is hooked to the longer side of the Windom). This effect can be equalized slightly by using balanced feeders. GL, Jim, WS6X Steve Ellington [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 3rd Party K3 Compatibility Question
Rick -- N8LP's products including LP-Pan. 73 de Greg At 01:43 AM 6/22/2008, Rick Tavan N6XI wrote: Please help me with an upcoming article on the K3 in NCJ. I want to mention some of the third party products that offer explicit support for the K3. I know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM Router software and cables and Elecraft products like KRC2 and XVnnn. What else? Thanks & 73, /Rick N6XI ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Filter Trade
I guess I should have been clearer...I want the FM filter...I have the 1.8 Khz filter... :-) 73 de Greg ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Filter Trade
Anyone interested in trading an FM filter for a 1.8 khz filter? Please contact me off line. 73 de Greg-N4CC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Lisagram arrived
I received my Lisagram...she said my K3 would likely ship tomorrow -- ordered on July 6. 73 de Greg-N4CC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft Cover
Greetings all -- I just wanted to report that I ordered a K3 cover from Rose - N7HKW (K0PP's XYL). She can be reached at [EMAIL PROTECTED] . It really will dress up the shack -- beautiful work...with the Elecraft moniker and my call letters. I chose black with gold embroidery and it really looks great! The service was swift, too. I was shocked at how fast it arrived and it was easy to pay with Paypal as well. Protect that new K3 with one of Rose's covers...write her for details...I think you'll be pleased Now if my K3 would just get shipped, I would have something on which to display that beautiful cover ...hi hi... 73 de Greg-N4CC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: [Elecraft_K3] K3 Shipping Status Update 11/26/07
Oh come on now, David...there is no "fiasco". The folks at Aptos are doing a marvelous job. They've had to deal with things that just "happen" when you have a complex production operation and are relying on subs for contract parts/boards. So the first K3's didn't come out on the original schedule...they have communicated why that is true and are providing weekly updates of revised schedules. The anxiety that is being created is caused more by people on this reflector who are SPECULATING on what is happening and whining about it. If you read updates you would know that if you ordered in early May then your radio is likely to ship in the next couple weeks...and if that changes, you will know why...Here's what was said... Shipping weeks of Nov 26-30 and Dec 3-7 (Orders with deposits): We will be shipping the remaining 5/1 orders and many of the 5/2 orders during this period. (We still have at least a week to go on 5/1 orders due to the very short holiday week last week.) We have been running a little slow on assembled K3s and are still working on shipping a small number of these from 4/27-30 this week. The shipping rate on these will pick up this week (week of 11/26) and next. The initial rush of orders was greatest 4/27-5/3, and also on 5/7. After that group is shipped our movement through the backlog calendar will pick up considerably. We're also adding staff (and overtime) in production and test and hope to beat the above plan. We'll update it here early each week. How can you ask for more than that? If you have a specific question regarding your order, ask them...don't talk about tarnished reputation on a reflector. I sent a note to Lisa yesterday evening asking if she expected shipment of my radio before Christmas. Mine was ordered on July 6. AT 8:02 PM Pacific time she replied...and said that if things go as planned it should be shipped before the end of the year... Try sending a note to one of the other manufacturers and see if you get a reply from them at 8 p.m. Ha! I also had not put down a deposit and told her that I would be happy to do that if priority was being given to those who did provide the deposit. She said a deposit would not change my place in line. I'm absolutely delighted and astounded by the prompt response from some obviously dedicated people. I've never owned an Elecraft radio before but if it works as well as the customer service, I know I will be happy. Patience, lad...if you didn't have the anticipation, you wouldn't appreciate it as much when you do get it. 73 de Greg-N4CC At 03:28 AM 11/27/2007, David Pratt wrote: Sadly, Julian, Elecraft's previous good name is being tarnished by the K3 fiasco. For several months, non-Elecraft users have been asking me about my K3. I keep putting them off and telling them I will let them know when I get it. Unfortunately, with them it has now become somewhat of a joke. Like you, I ordered mine with a deposit early May, prompted by the attraction of one of the first 200. Will it ever happen? 73 David G4DMP In a recent message, Julian G4ILO <[EMAIL PROTECTED]> wrote ... The option to pay a 50% deposit is still on the Elecraft order page. Doubtless the offer to get one of the first 200 is now withdrawn, but one wonders what the benefit of paying the deposit is, in that case. -- David G4DMP Leeds, England, UK -- ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ESD recommendation
Hello all -- Like everyone else I'm looking forward to a K3 showing up sometime before I become a SK...hi hi...(third production run...ugh)...but I'm trying to get prepared so everything will be ready to go when the kit gets here. I don't have any special "ESD" protection and was wondering what others have done to comply with appropriate ESD protectionand where you have obtained wrist straps, ESD mats, etc. I live in FL and normally static is not a particular problem...(lightning -- yeslow humidity and static -- no) It's not like a northern dry winter where you can walk across the carpet and draw a spark from a door knob...so I'm wondering if I even have to go to the effort...Interested in your thoughts...73 de Greg-N4CC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Covers
http://www.rigcoveralls.net/ At 01:23 PM 11/14/2007, David Ferrington, M0XDF wrote: I know someone in the US makes custom covers for radios, I even mailed about a K3 one I thought the site was http://radiocovers.com/ But looking at the site, I'm not so sure - anyone able to help? -- Any fool can destroy trees. They cannot defend themselves or run away. And few destroyers of trees ever plant any; nor can planting avail much toward restoring our grand aboriginal giants. It took more than three thousand years to make some of the oldest of the Sequoias, trees that are still standing in perfect strength and beauty, waving and singing in the mighty forests of the Sierra. -John Muir, naturalist, explorer, and writer (1838-1914) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
