Re: [Elecraft] P3 For Sale
The P3 is sold> Joe N9VX On Fri, Dec 30, 2016 at 4:30 AM, Joe Word <n9vx@gmail.com> wrote: > Email corrected... > For Sale Elecraft P3-F factory built panadapter in as new condition with > optional P3SVGA adapter for computer monitor use. No scratches and has not > been around tobacco smoke. Serial number 36xx. No longer have a K3, so > selling the P3. Comes with original box, manual and cable set: RF cable, > data cable and 2 power cables (from P3 or from power supply). $720 plus > help on shipping, $12 is about half, shipped in CONUS. Payment by money > order, Cashier's check or cash. I do not have a Papal account. Contact me: > n9vx.joe at gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 For Sale
Email corrected... For Sale Elecraft P3-F factory built panadapter in as new condition with optional P3SVGA adapter for computer monitor use. No scratches and has not been around tobacco smoke. Serial number 36xx. No longer have a K3, so selling the P3. Comes with original box, manual and cable set: RF cable, data cable and 2 power cables (from P3 or from power supply). $720 plus help on shipping, $12 is about half, shipped in CONUS. Payment by money order, Cashier's check or cash. I do not have a Papal account. Contact me: n9vx.joe at gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 For Sale
For Sale Elecraft P3-F factory built panadapter in as new condition with optional P3SVGA adapter for computer monitor use. No scratches and has not been around tobacco smoke. Serial number 36xx. No longer have a K3, so selling the P3. Comes with original box, manual and cable set: RF cable, data cable and 2 power cables (from P3 or from power supply). $720 plus help on shipping, $12 is about half, shipped in CONUS. Payment by money order, Cashier's check or cash. I do not have a Papal account. Contact me at: n9vx.joe at gmail,com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 For Sale
For Sale Elecraft P3-F factory built panadapter with optional P3SVGA adapter for computer monitor use. No scratches and has not been around tobacco smoke. Serial number 36xx. Comes with original box, manual and cable set (2 power cables (from P3 or from power supply), RF cable and data cable). $800 plus shipping. Payment by money order, Cashier's check or cash. I do not have a Papal account.Contact me at n9vx dot joe at gmail.com Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] For Sale: K3 Filters
The filters are sold pending payment. Joe N9VX On Wed, Jan 27, 2016 at 12:40 PM, Joe Word <n9vx@gmail.com> wrote: > K3 filters for sale: > > KFLA3A-6K $105 shipped. > > KBPF3A General coverage $140 shipped. > > Shipped to CONUS only, payment by money order, Cashier's check or > cash. No Paypal. Contact me at n9vx dot joe at gmail dot com > > Thanks and 73, > > Joe N9VX > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] For Sale: K3 Filters
K3 filters for sale: KFLA3A-6K $105 shipped. KBPF3A General coverage $140 shipped. Shipped to CONUS only, payment by money order, Cashier's check or cash. No Paypal. Contact me at n9vx dot joe at gmail dot com Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 For Sale
The K3 has been sold pending funds. Joe N9VX On Thu, Jan 14, 2016 at 10:38 AM, Joe Word <n9vx@gmail.com> wrote: > For sale Elecraft K3 100 watt version in excellent condition, no > scratches, from a smoke free home, serial number 5429. Has optional KXV3A > Interface (Rx Antenna ports, Transverter Ports and IF Out) and the stock > 2.7 filter. Comes with manuals and power cord. $1900 shipped in CONUS. > Payment by money order, Cashiers Check or cash, no Paypal. > Contact me at: n9vx dot joe at gmail.com > > 73, > > Joe N9VX > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 For Sale
For sale Elecraft K3 100 watt version in excellent condition, no scratches, from a smoke free home, serial number 5429. Has optional KXV3A Interface (Rx Antenna ports, Transverter Ports and IF Out) and the stock 2.7 filter. Comes with manuals and power cord. $1900 shipped in CONUS. Payment by money order, Cashiers Check or cash, no Paypal. Contact me at: n9vx dot joe at gmail.com 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Wanted: P3SVGA Adapter
Want to purchase a Elecraft P3SVGA P3 Video Adapter. Please state condition and priced shipped to Indiana. Respond to: n9vx dot joe at gmail dot com Thanks, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 CW Filters For Sale
All of the filters are sold. Thanks, Joe N9VX On Mon, Aug 17, 2015 at 7:10 PM, Joe Word n9vx@gmail.com wrote: The KFL3A-400 is still available. The 250 and 1.0K are sold. Joe N9VX On Mon, Aug 17, 2015 at 12:39 PM, Joe Word n9vx@gmail.com wrote: I have three 8 pole K3 CW filters for sale: KFL3A-250 KFL3A-400 KFL3A-1.0K $105 each shipped in CONUS, payment by money order, Cashier's check or cash. No Paypal. Contact me at n9vx dot joe at gmail dot com Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 CW Filters For Sale
The KFL3A-400 is still available. The 250 and 1.0K are sold. Joe N9VX On Mon, Aug 17, 2015 at 12:39 PM, Joe Word n9vx@gmail.com wrote: I have three 8 pole K3 CW filters for sale: KFL3A-250 KFL3A-400 KFL3A-1.0K $105 each shipped in CONUS, payment by money order, Cashier's check or cash. No Paypal. Contact me at n9vx dot joe at gmail dot com Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 CW Filters For Sale
I have three 8 pole K3 CW filters for sale: KFL3A-250 KFL3A-400 KFL3A-1.0K $105 each shipped in CONUS, payment by money order, Cashier's check or cash. No Paypal. Contact me at n9vx dot joe at gmail dot com Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 CW Filters For Sale
I have three 8 pole K3 CW filters for sale: KFLA-250 KFLA-400 KFLA-1.0K $105 each shipped in CONUS, payment by money order, Cashier's check or cash. No Paypal. Contact me at n9vx dot joe at gmail dot com Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Wanted: P3SVGA
Want to purchase a Elecraft P3SVGA P3 Video Adapter. Please state condition and priced shipped to Indiana. Respond to: n9vx dot joe at gmail dot com Thanks, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 vs SDR-IQ
Thanks to all that replied to my post. 1. I am using Tracking mode and have Averaging set at 14. I want to see the SSB pattern smoothly and not like an O'scope. I always slow the pattern down to see clearly the transmitted bandwidth and treble/bass balance. 2. I do not use Fixed mode, If I am tuning up the band I want to see whats ahead, in Fixed mode you can not. But the scope pattern stays 'clean in Fixed mode, I wish it stayed clean in Tracking mode. When I say clean I mean Averaging does not revert back to 0 while tuning. John, ZS5J please note, on the Flex 6500 (and all 6000 series) that used SmartSDR software, the panadapter is in Fixed Mode (to use a Elecraft term) and can not be changed. This is the reason I no longer own a Flex 6000 series radio. I have tried the various Auto Adjust parameters in Fixed Mode, but they do not resolve my concern. Joe N9VX --- Hi Joe - Do you have signal averaging turned on to reduce the noise floor? If you do, it has to stop averaging when the freq is being changed while tuning, temporarily raising the noise floor slightly. It then re-starts multi-pass averaging once you stop tuning. This is normal for signal averaging. I run with averaging set =2 or 3 passes. When I tune I barely notice a small increase in the noise floor. If you have a lot of local pulse noise, you might want to turn on the P3s NB function to help. If Averaging is turned off, I can't think of a normal scenario where the noise floor would go up when tuning the band. It certainly does not here. Anyone else have any ideas? 73, Eric /elecraft.com/ On 7/30/2015 5:43 PM, Joe Word wrote: I have been using a P3 with my K3 for the last two weeks and not happy with it's operation. I set the parameters to what I like, the patterns look good, but when I tune the screen fills with noise and you can not see the signals up and down the band. I am told the SVGA option does the same thing. Have owned radios from Apache Labs and Flex and used the SDR-IQ/SpectraVue and LP-Pan panadapters and all of them do not have this problem. On SDR-IQ/SpectraVue the pattern smears some when tuning, but no noise. Joe N9VX -- Has anyone compared the SDR-IQ as a panadapter with the P3? I am using the SDR-IQ now but would like to be able to use my entire computer screen for other displays during contests. Dave N1IX __Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric.swa...@elecraft.com __Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com - Previous message http://www.mail-archive.com/elecraft@mailman.qth.net/msg183821.html - View by thread http://www.mail-archive.com/elecraft@mailman.qth.net/index.html#183822 - View by date http://www.mail-archive.com/elecraft@mailman.qth.net/maillist.html#183822 - Next message http://www.mail-archive.com/elecraft@mailman.qth.net/msg183823.html - [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183784.html n1ix - - Re: [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183788.html Wes (N7WS) - Re: [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183809.html Guy Olinger K2AV - Re: [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183817.html Joe Subich, W4TV - [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183821.html Joe Word - - Re: [Elecraft] P3 vs SDR-IQ Eric Swartz - WA6HHQ, Elecraft - - Re: [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183823.html Walter Underwood - Re: [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183838.html John Kramer - - Re: [Elecraft] P3 vs SDR-I... http://www.mail-archive.com/elecraft@mailman.qth.net/msg183842.html Stewart - Re: [Elecraft] P3 vs SDR-IQ http://www.mail-archive.com/elecraft@mailman.qth.net/msg183824.html Phil Wheeler - - Re
[Elecraft] P3 vs SDR-IQ
I have been using a P3 with my K3 for the last two weeks and not happy with it's operation. I set the parameters to what I like, the patterns look good, but when I tune the screen fills with noise and you can not see the signals up and down the band. I am told the SVGA option does the same thing. Have owned radios from Apache Labs and Flex and used the SDR-IQ/SpectraVue and LP-Pan panadapters and all of them do not have this problem. On SDR-IQ/SpectraVue the pattern smears some when tuning, but no noise. Joe N9VX -- Has anyone compared the SDR-IQ as a panadapter with the P3? I am using the SDR-IQ now but would like to be able to use my entire computer screen for other displays during contests. Dave N1IX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KAT500] For Sale
The tuner is sold. Thanks, Joe N9VX On Sat, Jan 31, 2015 at 5:24 PM, Joe Word n9vx@gmail.com wrote: For sale Elecraft factory built KAT500 auto tuner in as new condition. Was purchased new in November 2014. From a tobacco smoke free home. This is the best tuner of this type I have owned. Comes with manual, power cord, computer interface cable and original box. $550 shipped in CONUS. Payment by money order or bank Cashier's Check, no Paypal. My email is correct on QRZ. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [KAT500] For Sale
For sale Elecraft factory built KAT500 auto tuner in as new condition. Was purchased new in November 2014. From a tobacco smoke free home. This is the best tuner of this type I have owned. Comes with manual, power cord, computer interface cable and original box. $550 shipped in CONUS. Payment by money order or bank Cashier's Check, no Paypal. My email is correct on QRZ. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [KPA500] Fan Replacement
Has anyone replaced the fan in the KPA500 with a quieter one? If so, could I get the model number? You can contact me off-list if you like, my email is correct on QRZ. Thanks, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Test
Test __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K3] Fan Replacement
Has anyone replaced the K3 fans with a quieter model? If so, please provide the model number and source. The first K3 I built the fans were very quite, but the last one I build was pretty loud and sold it. I am thinking of getting another if I can find a quieter fan. Please note: I am not looking for comments that your fans are quite or loud, don't want to clog up the list. I know what fans they did use and what model they use now (as of a year ago), so do not need that info. Thanks, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 For Sale
For sale very nice Elecraft K2, looks like built to NASA standards, serial number 5634 (latest Revision B RF board), comes with the KSB2 SSB adapter (built but not installed), KIO2 RS232 Serial adapter (not built or opened), Rework Eliminator kit, a probe, bag of misc parts and connectors, manuals and power cord. $560 shipped in CONUS, payment by money order or Cashiers Check, no Paypal. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 For Sale
The K2 has been sold. Thanks to all. Joe N9VX On Fri, Feb 28, 2014 at 10:54 AM, Joe Word n9vx@gmail.com wrote: For sale very nice Elecraft K2, looks like built to NASA standards, serial number 5634 (latest Revision B RF board), comes with the KSB2 SSB adapter (built but not installed), KIO2 RS232 Serial adapter (not built or opened), Rework Eliminator kit, a probe, bag of misc parts and connectors, manuals and power cord. $560 shipped in CONUS, payment by money order or Cashiers Check, no Paypal. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Trade: Eagle for K3
Want to do a trade deal,my Ten-Tec Eagle for your K3. The Eagle is a high performance simple to operate, simple to set-up radio. There is one set-up menu with 11 items and all else is done with knobs and buttons. It is a few months old and is in as new condition, has not been around tobacco smoke. Comes with hand mic, unused power cord, unused original manual and a manual copy in a ring bander with the pages in plastic, unopened bag of connectors and etc, and original box. Also comes with an optional model 712 USB Sound Card Digital Mode Adapter. . Would like to trade for a K3/100 of about the same age and condition. I would pay boot based on your specific radio. . For trade only. Please contact me direct at joe.n9vx at gmail dot com 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Monitor output on P3
Can we change the refresh rate that is sent to the monitor? The default is 60 Hz on most video cards, but some people (me) can not use a monitor at 60 Hz, it has to be 70 Hz or above. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 Heat Expansion Pop
I changed the screws in my amp yesterday morning and ran it yesterday afternoon and night, and have not heard any pop since. I used the 3/16 that were extras from a K3 build. I got from the hardware store 4-40 1/2 long flat heads, but the counter-sink angle was different, so I did not use them. Here are the basic steps I used to change out the screws: You have to remove the top cover (do not remove the screw second from the back on the left (it attaches the safety interlock plunger). Remove the right side panel and remove the front panel. Remove all the wires attached to the front of the PA unit, remove the screws that go through the bottom panel into the Z bracket on the PA unit, remove the two back screws that go into the Z bracket. Then rotate the PA unit out from the front so you can get to the screws to be changed. I replaced one screw at a time, did not tighten them until all were replaced. Joe N9VX --- My amp has been click free for four days now. To clarify, page 22 Fig.27, is the area I'm referring to. Change the five 5/16 screws to 3/16 when mounting the Z-bracket on the PA/LPF module. I also would have preferred to use 1/4 screws but none come with the kit. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA500 Heat Expansion Pop
Are you still pop free after changing the screws? Are the five screws you changed the ones installed on page 22 of the assembly manual? Thanks, Joe N9VX -- I think I may have solved this problem. One of the other posts mentions that the Z-bracket screws are too long and you don't get a tight fit. I changed the five screws from 5/16 to 3/16 and did notice a better grip between the bracket and the PA assembly. I have run it all evening and haven't heard a click or a pop. I even ran the temp up and still nothing. Will it last? I don't know, but it seems to have fixed it. The guy who suggested this has submitted it to Elecraft for a change. Good luck and lets hear if any of you have the same result. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 Heat Expansion Pop
Could we get more info on this possible fix, how much disassembly is required? Looks like the PA unit must come out? Joe N9VX -- I think I may have solved this problem. One of the other posts mentions that the Z-bracket screws are too long and you don't get a tight fit. I changed the five screws from 5/16 to 3/16 and did notice a better grip between the bracket and the PA assembly. I have run it all evening and haven't heard a click or a pop. I even ran the temp up and still nothing. Will it last? I don't know, but it seems to have fixed it. The guy who suggested this has submitted it to Elecraft for a change. Good luck and lets hear if any of you have the same result. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA500 Heat Expansion Pop
This is what I know at this point. Based on comments on this board and private emails, this is a common issue, I would think a good many people that don't think they have the issue just don't hear it due to hearing loss or head phone use. It happens with both factory made and kits. I tried to resolve mine by loosening the top panel screws (so not torqued), but no help. I loosened the transformer bolt and re-tighten it (it was tight to start with), but no help. Could this be from the heat sensing device that triggers the fan? Joe N9VX On Thu, Dec 8, 2011 at 12:37 PM, Joe Word joe.n...@gmail.com wrote: My KPA500 has developed a heat expansion pop. When it heats up and then cools down I get a pop from inside the amp. It does this now every time I make a SSB transmission. Anyone else experience this? If so, any resolution? Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 Heat Expansion Pop
My KPA500 has developed a heat expansion pop. When it heats up and then cools down I get a pop from inside the amp. It does this now every time I make a SSB transmission. Anyone else experience this? If so, any resolution? Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA500 Heat Expansion Pop
Gary, That sounds like what I am hearing, thought it was a relay controlling the fan, but as you said, it did not pop when the fan came on/off. Joe N9VX - Mine pops or clicks too. In my case, it sounds like a relay switching. I thought at first it was something sensing the temperature and changing the fan speed, but the pop doesn't (often) coincide with a change in fan speed, so I think that's a red herring. Another ZL told me his KPA does the same thing. Our amps still work just fine though! 73 Gary ZL2iFB On Thu, Dec 8, 2011 at 12:37 PM, Joe Word joe.n...@gmail.com wrote: My KPA500 has developed a heat expansion pop. When it heats up and then cools down I get a pop from inside the amp. It does this now every time I make a SSB transmission. Anyone else experience this? If so, any resolution? Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [KPA500] Feature Request
Personally, I simply kill the main supply power line to the station. That does the same thing with one switch. Answer: I also kill the power to the station, but I run the amp on 240v and have no power switch. Here in Texas we get a lot of lightning storms that wreak havoc on our electrical grid. In the 12 years I've lived here, I have lost 2 televisions, a microwave and a range to lightning related power issues. Answer: I also unplug in warm weather, but in the winter I do not. The amp is slightly warm with the back switch on. I might add, I love the amp, it's one of the best pieces of equipment I have ever owned! Joe N9VX On Tue, Nov 29, 2011 at 8:44 PM, Joe Word joe.n...@gmail.com wrote: [KPA500] It would be great if a front panel light would stay on when the front power switch is off and the back switch is on; I keep forgetting to turn it off. The STBY amber led would be good. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [KPA500] Feature Request
[KPA500] It would be great if a front panel light would stay on when the front power switch is off and the back switch is on; I keep forgetting to turn it off. The STBY amber led would be good. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 audio muffled?
Chuck, I had muffled audio reports while using a Tokyo Hi Power 1.2Kfx amp. It has coming from RF getting into the amp. THP wrote it off, saying nothing they could (would) do about it because I was on the second floor. But... I now have a KPA-500 and have no problems on any band at any power level. Just a thought! Joe N9VX I have gotten a few reports of sounding like my audio is muffled as compared to running the K3 alone. It is true that with several listeners in different states, there is not a consensus of opinion on that. Some of the guys think it sounds just fine, and some say they can hear a slight muffled sound with the KPA turned on. The point of comparing it to K3 only and K3 with KPA500 is that the mic is not in the equation. The report is clearly that the amp sounds muffled. Not unreadable, just slightly muffled. I have a bias current of 0.4A...about the only thing I can think of to check. I think there was some discussion of setting the bias current here, but I can't find it again. What is the range of bias current for best linearity? I don't see any help in the manual. - Chuck, KE9UW -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3B
Has there been any discussion of a possible P3B (black box), that would be the same as the P3 with out the screen, just plug a PC monitor into the black box? Also what is the status of the monitor connection to the P3? Thinking about a K3 and P3 for one of my positions. I have the KPA500 and love it. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KAT500
Dave, Not much to say... it just works perfectly!! One of the best pieces of equipment I have ever owned. Joe N9VX - Hi All, I haven't seen much of anything lately about the KAT500. Is there any updated info out there? I meant to ask Eric or Wayne at Pacificon, but they were swamped with customers. Dave W7AQK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KAT500
Sorry guys, I misread the question. I was talking about KPA500. Joe N9VX On Sat, Nov 5, 2011 at 7:21 PM, Joe Word joe.n...@gmail.com wrote: Dave, Not much to say... it just works perfectly!! One of the best pieces of equipment I have ever owned. Joe N9VX - Hi All, I haven't seen much of anything lately about the KAT500. Is there any updated info out there? I meant to ask Eric or Wayne at Pacificon, but they were swamped with customers. Dave W7AQK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 General Questions
I am considering a KPA500 and have some questions for those that own one: 1. What Input SWR are you seeing? Does it vary by band? 2. Is there a lag in band switching when not using a K3 (Used with non-Elecraft radio). 3. In normal SSB operation, how loud is the fan? I know this varies per person, some don't hear fan noise and others do. What would you compare it to? As an example, the Yaesu MARK-V Field is OK, but the MARK-V 200 watt model is too loud for me. Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA500 General Questions
Thanks all for the comments. What kind of input power and output numbers are you seeing? Does it vary much across the bands? One review on EHAM stated 25 in and 500 out. Joe N9VX On Mon, Sep 26, 2011 at 11:10 AM, Joe Word joe.n...@gmail.com wrote: I am considering a KPA500 and have some questions for those that own one: 1. What Input SWR are you seeing? Does it vary by band? 2. Is there a lag in band switching when not using a K3 (Used with non-Elecraft radio). 3. In normal SSB operation, how loud is the fan? I know this varies per person, some don't hear fan noise and others do. What would you compare it to? As an example, the Yaesu MARK-V Field is OK, but the MARK-V 200 watt model is too loud for me. Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Would like to see P3 in operation
I live between Cincinnati, Dayton and Indianapolis in Connersville, IN and would like to see a P3 in operation. If you live in this general area and would not mind me coming by and looking at the P3, please let me know. Thanks and 73, Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3: Kit Resistance Value Question
I am building a new K3 kit and doing resistance checks, the book states the resistance value on U12 to ground should be more than 500 ohms, mine checks 349 ohms, is this a problem? U13 to ground is 378 ohms, books states should be greater than 125 ohms, so OK. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Kit Resistance Value Question
Just heard back from tech support (thought they were closed for the day), the value is OK. Joe N9VX On Mon, Jun 6, 2011 at 9:22 PM, Joe Word joe.n...@gmail.com wrote: I am building a new K3 kit and doing resistance checks, the book states the resistance value on U12 to ground should be more than 500 ohms, mine checks 349 ohms, is this a problem? U13 to ground is 378 ohms, books states should be greater than 125 ohms, so OK. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA-500 Features and Pricing
I agree with Jack's comments below 100%. Sounds like the amp is way over priced to me. Joe N9VX no K3 at this time, but thinking about another one. - It looks like Elecraft may be abandoning their traditional most bang for the buck market position in favor of selling over priced matching accessories to stupid yuppies. Unlike the K3, a $2000 500W amp is not going to be in the best value position in anyone's analysis, although I'm sure they will sell a few to the true believers. Currently, used prices for ALS-600's run $800 to $900 and ALS-1300's are showing up for sale at $1800 to $2000. In my case, there is a finite amount of money available for radio station enhancements. When I can buy a solid state MFJ for ~$1.50/watt or an older no-tune ETO Alpha for ~$1.00/watt, a $4.00/watt Amp that's principal virtue seems to be matching my K3, doesn't have a snow balls chance in Hades of ever gracing my desk. But maybe the rumored ridiculous price point is just a smoke screen and the real product will show up with a more palatible price. 73 Jack KZ5A K3 #4165 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] ESSB Question
Does turning on ESSB have any effect other that allowing wider TX SSB bandwidth? Say I had a setup using the 2.8 filter and another setup using the 6.0 filter transmitting at 3.0, is there any difference other that the .2 greater bandwidth? Does the ESSB feature change the mic circuit or any thing else? I understand we have two separate EQ setups (SSB and ESSB). Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] Screen Viewing Angle
I have a friends K3 borrowed (evaluating to possible purchase one) and find with the bale up and the K3 setting on by desk the screen's contract fades way down when I sit back in by chair. For best viewing I have to stand up and look down at it. If I look straight into it the contrast is poor. The serial number is in the 1300 range, has there been improvements with latter S/N versions? Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Screen Viewing Angle
Thanks for all the responses, I made some adjustments and it is very good now. 73, Joe N9VX On Mon, Aug 23, 2010 at 11:21 AM, Joe Word joe.n...@gmail.com wrote: I have a friends K3 borrowed (evaluating to possible purchase one) and find with the bale up and the K3 setting on by desk the screen's contract fades way down when I sit back in by chair. For best viewing I have to stand up and look down at it. If I look straight into it the contrast is poor. The serial number is in the 1300 range, has there been improvements with latter S/N versions? Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 - Stand Alone Panadaptor
Has anyone developed a stand alone Panadaptor without the need for a computer? Is Elecraft considering this? The stand alone unit would be something like Yaesu's DMU unit. Joe N9VX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3: General Coverage Receive Filter
What is the General Coverage Receive Filter, how does it work? If it is just another roofing filters, why not just use the 6.0 filter? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3: PSK31 and DigiPan Questions
I have read the Elecraft write-up and have questions. I am on 14.070 and get some data, but not human readable. Using sound card in by Compaq Deskpro computer. 1. Do I use a stereo or mono plug for line out? Using stereo now. 2. Do I use BPSK31 or QPSK31? Using BPSK31 now. 3. Assume the K3 should be set to DATA Mode? What else do I need to know? I am starting at ground zero. Thanks, Joe N9VX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 and HRD
I am trying to use Ham Radio Deluxe to control my K3, I get the message Acces is Denied. I am on the correct port and etc, I use the same cable to update the K3. Is there any setup in the K3 needed? 73, Joe N9VX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 and HRD
That was the problem, the K3 load software was running. I also set to 38,400. Thanks Simon -- Another program has the COM port open already. Simon Brown, HB9DRV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - PSK31 Procedure
Would like to try PSK31 on my K3, could someone post a simple procedure? Thought I would use HRD. Would like to see: run cable from ? to ?, set level in menu(s)? And which PSK31, seems like there are various forms. Thanks and 73, Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - PSK31 Procedure
Thanks for all who pointed me to the Elecraft web site, unfortunately the company I am working at blocks the web site, the message states it is entertainment, but will let me go to QTH.net. I will look this weekend. 73, Joe N9VX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - ESSB Availability
Any update on when the ESSB function will be turned on in the firmware? I am using the 2.7 filter with various dynamic microphones and getting good audio reports, but not as good as I get from my Icom 756 PRO III. Would like to try a little wider bandwidth (about 3.0) and see if I can match the PRO. Will need the 6.0 filter of course. The various dynamic mics I am using have gotten excellent audio reports using rigs like the Yaesu Mark IV, Kenwood TS-870 and etc. I have had three different people view my transmit bandwidth on their spectrum scopes and confirmed that my 2.7 filter is in fact transmitting at 2.7 bandwidth (not 2.9 as previous thought). Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - RIT XIT
I wish RIT and XIT would stay on when changing bands or memory channels, it goes off when going to another band or memory channel. Anyone else have thoughts on this? Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - Setup After Firmware Upgrade
What setup is required after firmware upgrade? Say 1.88 to 1.96b. Should we do the Low and High TX Gain Calibration? What else? Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Fwd: a real bandscope
I alteady sent this, but do not see the postion... so here it is again. I vote for a stand alone bandscope. I am tied to a computer 8 hours a day and don't want to be tied to one in my hobby. The IC-756PRO III stays until the K3 has one. If we have to have a computer, might as well have a Flex Radio. Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Questions
1. How many volts is the mic bias? 2. Why does the filter selection always end in 5 (2.65, 2.75, 2.85 etc)? 3. Can the Absolute S Meter function be set to ignore the RF Gain setting? Thanks and 73, Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3: High-Power TX Gain Calibration - No Output
I am having problems with the 50 watt TX Gain Calibration, it shows 0 watts and gives the error ERR TXG. The Low-Power 5 watt test worked fine and have low power output. Anyone had and resolved this problem? Running FW 1.88 Thanks, Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Fwd: K3: High-Power TX Gain Calibration - No Output
Dave, PA is set to nor and have turned off/on multiple times. Just checked the Circuit Breaker, it's making contact. Joe Dave wrote.. Have you initialized the PA in the menu and turned the rig off and on a couple of times? Dave Wilburn - -- Forwarded message -- From: Joe Word [EMAIL PROTECTED] Date: May 13, 2008 11:28 AM Subject: K3: High-Power TX Gain Calibration - No Output To: elecraft@mailman.qth.net I am having problems with the 50 watt TX Gain Calibration, it shows 0 watts and gives the error ERR TXG. The Low-Power 5 watt test worked fine and have low power output. Anyone had and resolved this problem? Running FW 1.88 Thanks, Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Fwd: K3: High-Power TX Gain Calibration - No Output
I fixed the problem. Removed KPA3 and found a gray wire out of T1, at the C1 end, was under the mounting bracket (KPA3 to RF Shield). The K3 now puts out full power and the High Power Gain Calibration is complete for all bands. Thanks Gary at Elecraft for the excellent help. And thanks to all of you for your comments and suggestions. What a nice receiver!!! 73, Joe N9VX -- Forwarded message -- From: Joe Word [EMAIL PROTECTED] Date: May 13, 2008 11:28 AM Subject: K3: High-Power TX Gain Calibration - No Output To: elecraft@mailman.qth.net I am having problems with the 50 watt TX Gain Calibration, it shows 0 watts and gives the error ERR TXG. The Low-Power 5 watt test worked fine and have low power output. Anyone had and resolved this problem? Running FW 1.88 Thanks, Joe N9VX K3 #841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3: VFO CRS Coarse Tuning Rate
Can someone look at Menu VFO CRS (Coarse Tuning Rate) and tell me what the choises are, I think they are 20, 10, 5, 1. The manual does not define, I am at work and can not get to my K3. Thanks, Joe N9VX K3 S/N 841 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - Assembly Issue - U12 Test
My resistance test (page 39) on U12 is less than the 500 ohms per manual. It is 350 to 400 ohmn (different scales on digital meter). My analog meter shows 270 ohms. Anyone else had this issue? I emailed support, but thought I would check here also. K3 S/N 841 Joe N9VX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Fwd: K3 - Assembly Issue - U12 Test
Found problem meter problem... OK now. -- Forwarded message -- From: Joe Word [EMAIL PROTECTED] Date: May 10, 2008 9:55 AM Subject: K3 - Assembly Issue - U12 Test To: elecraft@mailman.qth.net My resistance test (page 39) on U12 is less than the 500 ohms per manual. It is 350 to 400 ohmn (different scales on digital meter). My analog meter shows 270 ohms. Anyone else had this issue? I emailed support, but thought I would check here also. K3 S/N 841 Joe N9VX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3: S/N 841 Arrived
K3/100 kit arrived today (May 6, 2008) Ordered 11/28/07. 2.1 filter option. All parts accounted for. 73, Joe N9VX Connersville, IN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com