[Elecraft] K3 External Speakers
John, FWIW, my West Mountain Radio COMspkr set totally free of interference. The unit with the amp is immediately beside a 1KW amp and the antenna cables for several rigs pass within inches behind the unit(s). 73! de Ken Kopp - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] QRM
I hear it in SW Montana at 1305 ... about S7 73! Ken K0PP elecraftcov...@gmail.com On Wed, Dec 28, 2011 at 11:41 AM, Jim McDonald j...@n7us.net wrote: Peaking S7 on my K3 at 160 degrees from NW of Chicago at 1130Z. Cat (or brick?) on a key? 73, Jim N7US -Original Message- Anyone else copying a steady carrier at 7000.8 this morning? It has been on for several hours as of 0745. Glenn K5ZE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Our Holiday Wishes to you
Hello Elecrafters! Ken and I send our best wishes to each of you for the Christmas Holidays. 88/73! Rose - N7HKW Ken - K0PP elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 KPA3 power pins of SN 56
My K3 (SN 56) has the non-gold pins ... just checked them while in the process of adding the LO stiffeners ... and they are unblemished. It's had heavy contest use, too. Our Montana climate is dry ... this may be a factor. 73! Ken K0PP k...@mailman.qth.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Pileup markers [ was Re: Band edge markers]
Yeah, sometimes we're like trying to herd cats ... and keep 'em quiet. (:-) 73! Ken - K0PP On Wed, Dec 7, 2011 at 10:04 PM, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com wrote: And now its time to close this thread and move back to our regular mayhem.. 73, Eric List Moderator www.elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Dust cover for the KX3
I've been working with Wayne at Elecraft on a dust cover for the KX3. Prototypes have been sent back and forth, and a design is almost finalized. The paddle assembly will be an option, and I'd like to know if there are those who would -not- purchase the paddles, and therefore would not want an opening in the cover for them. We'll address a potential padded case next. It's a complex issue, with many concepts of what extras might be added over and above the KX3. Stay tuned, and 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 - What am I observing?
Hi Phil, You may be seeing hum or other noise on his carrier. You'll likely see the same sort of display when observing WWV's signal when they're transmitting their tone/s. Tune around the bands a bit and I think you'll see the double spikes on quite a number of signals, regardless of mode. Ignore the Rose header ... I'm using her computer for this reply. 73! Ken - K0PP elecraftcov...@gmail.com Here's my question: What are the two spikes that I see about 500 Hz to each side of 28.130, approximately 25-30 dB down from the center's peak level (-125 to -130 dB)? These spikes are above my observed floor about 20-25 dB. It's a beautiful thing; I simply am not sure what I'm seeing. One thing I am sure of, when you all respond with the answer, I'll bop myself in the head for not thinking about it! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] OT- Coax for ground wire?
Most sheet metal shops can sheer copper sheets into almost any width one would want, and the cost is reasonable. I had about half of a 4 x 8 sheet sut into 1 and 2 inch x 4 foot strips several years ago and that's used throughout my station's grounding system. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Regarding Heathkit
Wayne, you spin a nice yarn. Enjoyed the read. (:-)) 73! Ken Kopp - K0PP elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KE7X K3 Book 20% saving
Cover is in color ... text and inside photos are B/W 73! Ken - K0PP On Sat, Jun 25, 2011 at 8:28 AM, Bill W4ZV btipp...@alum.mit.edu wrote: Bill W4ZV wrote: Yes...B/W only. Sorry...should have said the .pdf download is B/W only...don't know about the printed version. 73, Bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2/100 75 meters lost receive
It as written as tongue-in-cheek humor, Don. I trust most realized that. ... We all realize you devote LOTS of your (unpaid) time and effort to our collective enjoyment and knowledge of Elecraft equuipment. 73! Ken - K0PP On Fri, Jun 24, 2011 at 11:25 AM, Don Wilhelm w3...@embarqmail.com wrote: What Big Bucks? There is no money derived from any of my email correspondence, only when I do hands on work on a radio. 73, Don W3FPR On 6/24/2011 11:46 AM, Ken - K0PP wrote: That's why Don get the Big Bucks! (:-) 73! Ken - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA500 Kit
Got our kit today 14:00 MESZ from local customs. KPA500-K #79 already built and ready to accompany ZD8D-Team to Ascension Island. 73 Wolf DK1IP Member of ZD8D Am 16.06.2011 um 16:44:18 schrieb Klaus Koppendorfer: My notification was yesterday at 11.12pm also Europe :) 73 Klaus OE6KYG KX1 244 K2 1331 K3 115 -Ursprüngliche Nachricht- Von: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net ] Im Auftrag von Holger Meinecke Gesendet: Donnerstag, 16. Juni 2011 16:31 An: elecraft@mailman.qth.net Betreff: Re: [Elecraft] KPA500 Kit Got my confirmation yesterday too, No. 1 in europe ? '73 Holger DL6ABM --- Mike Fatchett W0MU w...@w0mu.com schrieb am Do, 16.6.2011: Von: Mike Fatchett W0MU w...@w0mu.com Betreff: Re: [Elecraft] KPA500 Kit An: elecraft@mailman.qth.net Datum: Donnerstag, 16. Juni, 2011 14:16 Uhr I was gone yesterday but also got a confirmation email that the kit was going to ship soon. Mike W0MU On 6/15/2011 4:51 PM, Rob May wrote: Got an email from Vicki at Elecraft saying my KPA500 kit will be shipping in the next 5-7 days. Let the fun begin! 73, Rob NV5E __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] What is a dB worth was: Re: KX3 vs. K3 and other rigs?
There's a saying among VHF / UHF'ers in reference to coax and connector losses that every .5db counts. 73! Ken - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Private Sales of used Elecraft Rigs
Payment certainly isn't a problem with PayPal, but without a PayPal account it can be problematic. Foreign ... to the US ... money orders or even bank checks are extremely difficult to process. For example, a check drawn on a Panama bank would have cost $75 to deposit into her account. It's also likely related to a general lack of knowledge about overseas packaging and how to fill out the customs forms. The blanks on the forms are small and difficult to write in. There are two forms to be used, depending on the size of the package and a few other variables. I do the shipping for Rose and she receives orders from all over the world, so I've become reasonably familiar with the procedure, but it's still a task. The average transit time seems to be from two to as much as four weeks. Israel is the exception. It can take several months for a package to be delivered there. Probably more than you wanted to know ... 73! Ken Kopp - K0PP elecraftcov...@gmail.com http://tinyurl.com/7lm3m5 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Seapac
For the first time in a number of years, Rose and I won't be at Seapac. It's our favorite convention and we have many friends there that we enjoy having evening dinners with. Last year's trip cost a bit over $700 and she sold only one K3 cover, but the main reason to stay home this year is simply the cost of fuel. Maybe next year. 73! Ken Rose elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] XG3 / KX3 case confusion
My posting said that I am looking at providing a case for the XG3 ... not the KX3. I am aware that Elecraft has an interest in marketing a KX3 case, and if that comes to pass I wouldn't want to make a KX3 case that competes with them. I have a design in mind, but let's see what Elecraft elects to do. Thank you for your interest and suggestions. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] OT: Need English / Italian translator
I have an Italian customer that I am having trouble communicating with about his K3 case and cover order. Is there someone on the reflector who would be willing translate an exchange of a couple of questions for me concerning his order? What I have in mind is to send you a message for him in English and you translate and forward it to him. Please contact me off the reflector if you'd be able to help. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Mac Grounding
same with me, except it's a K3/100 on HF and K3/10 on UHF (through transverter TR432H). Running 750W on HF (sometimes) and up to 700W on UHF (during contests) there are absolutely no problems. Rigs are connected via an Edgeport USB - 4Serial-converter and audio in/out phono lines. 73 Wolf DK1IP I have a Mac Mini sitting right next to my K3/10 on my desk and have had no problems. The radio is grounded of course, but the computer is not. 73s de Dave KJ6CBS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA500 carrying case question
Hi Duane, No, the KPA500 isn't in production that I'm aware of, but will be soon. I'm just getting prepared. I've already made a dust cover for one of the beta testers, and have a number of responses to my question that indicate plans to purchase dust covers and/or carrying cases by future KPA500 purchasers. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 carrying case question
I'm about to have foam end caps made for carrying the KPA500 amplifier in a DXpedition case, and I'd like to have some idea of how many to order. They will be identical to the K3 cases. Do you expect to purchase one? 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 covers and cases
A bit of clarification is in order. I've noticed that many non-US customers use the word cover when asking about my carrying cases. Phil has the first KPA500 dust cover, and he's confirmed that the fit is correct, so they are now available. Gary has a DXpedition case with the foam protective end caps for his K3. He has also asked about a matching carrying case for his field test KPA500. A DXpedition-type case for the KPA500 is in the works, but won't be available for some time. Considerable effort and cost is involved in developing a correctly fitting set of end caps for the KPA500. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA-500 dimensions
Hi Tom, The dimensions are essentially the same ... We saw the first two at Visalia last year, and will be making cases and covers for them. 73! Rose - N7HKW elecraftcov...@gmail.com http://tinyurl.com/7lm3m5 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] AF1 filter
I'll second Don's endorsement of Dave, W8FGU's enclusures for Elecraft Mini-Modules. We show some of them at Rose's booth at west coast hamfests. I have several, and they're nicely done. 73! Ken - K0PP elecraftcov...@gmail.com http://tinyurl.com/7lm3m5 On Sat, Feb 12, 2011 at 5:36 PM, Don Wilhelm w3...@embarqmail.com wrote: George, I don't have the hole dimensions, but I would like to point out that Dave, W8FGU has some very nice acrylic enclosures for many of the Mini-modules including the AF1. See http://w8fgu.home.comcast.net/~w8fgu/af1encl.html 73, Don W3FPR On 2/12/2011 7:24 PM, w2b...@aol.com wrote: Anyone have the hole layout dementions for mounting this unit in a enclosure? Tnx George/W2BPI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 TX spurs?
I think I recall a thread about spurs being produced by a K3's TX, but didn't pay enough attention at the time. I've since become aware of a K3 that appeared to have two spurs showing up on my P3. They were about 30db down from his very strong carrier on 7031 KHZ, and equally spaced about 1 KHZ on either side. They both could be tuned in and copied as individual signals. I was surprised when I asked the fella what his rig was and he told me it is a K3. (;-) I have -not- seen these spurs appear on other strong signals since this event, and follow-up tests with him have not shown the spurs ... but ... I've not seen his signal as strong as it was at the time. There's no doubt they were real, but what might be the cause? Is / was the problem with his K3, my K3 or my P3. Thoughts? 73! Ken Kopp - K0PP elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Transmitting while listening in diversity mode
An IRC Model 196 is an excellent solution. I have them on my K2 and K3. I think they're available from Array Solutions. 73! Ken Kopp - K0PP elecraftcov...@gmail.com http://tinyurl.com/7lm3m5 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Correction: Transmitting while listening in diversity mode
The post should read ICE Model 196, not IRC ... 73! Ken Kopp - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Activating the APF
Mark, There are -no- stupid questions. Push and Hold XFIL. You must be in CW mode. 73! Ken Kopp - K0PP elecraftcpv...@gmail.com On Thu, Dec 30, 2010 at 7:48 PM, pastor...@verizon.net wrote: I hate to ask a stupid question, but how does one activate the new APF that is available with the new version of the firmware. Any help will be much appreciated. Mark KB3Z __ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Happy Holiday Season to all !
Ken and I wish for each of you a Happy Holiday Season. 88! de Rose - N7HKW 73! de Ken - K0PP elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Memory Editor
David, The 6M repeater offsets here in the US are either 1.0 or 1.6 MHZ. There are exceptions, but not many. A duplexer for only a .5 MHZ frequency separation would be difficult to build. 73! Ken Kopp - K0PP Montana VHF / UHF Frequency Coordinator elecraftcov...@gmail.com On Tue, Dec 14, 2010 at 1:50 AM, David Pratt da...@g4dmp.fsnet.co.uk wrote __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft Covers has a new ISP/address
Rose has a new e-mail provider / ISP that appears to be free of the problems related to her old service, which was often black-listed or blocked by other carriers. Many messages, both to and from her, simply vanished. If you've not had a response to an inquiry, please try again. Lisa and Eric at have updated the Elecraft site to reflect the new contact information. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft Covers has a new address
I have a new ISP and e-mail provider that appears to be free of the problems related to my old service, which was often black-listed or blocked by some carriers. Many messages, both to and from me, simply vanished. If you've not had a response to an inquiry, please try again. Lisa and Eric at have updated the Elecraft site to reflect the new contact information. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 cursors won't go up more then 200 MHz
hi Jim, sorry I've been not clear enough to explain my problem. It is the CENTER frequency I'm talking about not the SPAN. For example: receiving frequency is at 432.418 MHz (German beacon) and P3 has been switched on together with K3. P3 displays the same center frequency as the K3 dial shows. Now you tap 'Marker A' an switch it on. Displayed on P3's screen is 'Marker A 432418'. As soon as you dial the P3 select the P3's display shows 'Marker A 20'. You only can now dial to a frequency BELOW 20, there's no chance dialing mor than 20. If you now try qsying via P3 selct (tap to QSY) the K3 won't follow. It is fixed to K3's frequency. Sorry about being not clear enough, but my English is too poor to make the explanation clearer. Hope you understand my problem anyway ;-). Thanks for answering es 73 Wolf DK1IP Am 16.09.2010 um 14:21:01 schrieb Jim Cox: The span of the P3 is 200 khz. You state 200 mhz so not sure if span is what your questioning. Jim K4JAF - Original Message - From: Wolf E. Rose wolf.e.r...@freenet.de To: elecraft@mailman.qth.net Sent: Thursday, September 16, 2010 12:47 AM Subject: [Elecraft] P3 cursors won't go up more then 200 MHz hi folks, just preparing everything for the IARU-region 1 UHF/SHF-contest (10/2-3). While testing I was not able to set the P3's cursors beyond 200 MHz. Anybody show me the right way to exceed this frequency limit please. I'm sure this must be a software bug between operator's ears. Everything else (K3/10 #1935, Kuhne TR432H transverter) working together fine since years. Only the brandnew P3 #323 won't follow ... ;-( 73 Wolf DK1IP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 cursors won't go up more then 200 MHz
hi folks, just preparing everything for the IARU-region 1 UHF/SHF-contest (10/2-3). While testing I was not able to set the P3's cursors beyond 200 MHz. Anybody show me the right way to exceed this frequency limit please. I'm sure this must be a software bug between operator's ears. Everything else (K3/10 #1935, Kuhne TR432H transverter) working together fine since years. Only the brandnew P3 #323 won't follow ... ;-( 73 Wolf DK1IP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
