[Elecraft] P3 question
Please reference the P3 manual pp19. Markers donot follow the VFO. They are used to set VFOA (MARKER A) or VFOB (MARKER B) with QSY TAP, depending which marker is displayed on the P3 screen. 73 de Ben W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 pre order
Ordered K4D w/KAT4 4/4/23; PIA. Quoted shipment 15 – 20 WORKING days …. Patiently QRX .,,, de Ben W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] So today i learned about BNC-BP and red/black terminals
The assembly instruction got lost in translation. De W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3/PX3 encoders.
Hello List Encoders in both my KX3 and PX3 have become very noisey after being idle for a few months. The PX3 is on verge of total failure. I know the KX3 had an encoder upgrade a while back and that appears to be an easy process to effect replacement. For the PX3 I can find no information on the replacement process. Has anyone on the list perform the replacement activity? TIA 73 de Ben W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] I need a Sherlock Holmes (weird spurs on 40m)
Alan, If you have central air-condx/heating with variable speed compressor and / or fans(s), shut it down and check for the spurs. What you are describing is the same I see at my QTh when my unit is cooling/heating. I see spurs only wihen the compressor and/or fans are running. My unit is a “dual fuel” unit, used as a heatpump above 43F, swithching to a gas fired furnace below 43F. It has no electric powered “heat strips.” For summer cooling it is configured as a “normal” AC unit. 73 de Ben W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 - K3S Upgrades
Has anyone received ordered K3 / K3S upgrade? De Beb W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 drive level for Q5 Signal 432 Transverter
Reference pp 49 of the K3 manul. Procedure to calibrate the “LP XVERTER WATTMETER” is presenter there. The “Power Meter” for the LP port is not a power meter in the general sense…. You will need a scope or meter capable of accurately measuring RF at the desired frequency.. de Ben W4SC. Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 Sprogs
I had the same issues. The interconnects supplied with the P3s I had were poor. I finally cut every one in half and filed in the circular file. Made my own with some DS-RG316 and quality 50 Ohm BNC new old stock. No more interconnect issues…. de Ben W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TX EQ issue
Sorry,,, I should have been clear that this was for K3 / K3S.. W4SC Sent from Mail for Windows From: Wayne Burdick Sent: Saturday, December 18, 2021 19:56 To: w4sc Cc: Elecraft Reflector Subject: Re: [Elecraft] TX EQ issue Hi Ben, Separate TX EQ for different voice modes has not yet been implemented. I'll make sure it's on the list. 73, Wayne N6KR > On Dec 18, 2021, at 8:59 AM, w4sc wrote: > > Having trouble setting TX-EQ for FM and SSB. Changing TX EQ when setting TX > EQ in FM mode, the TX EQ setting for SSB changes to what was set when in the > FM mode. This feature appears to not be working. > > Manual says two separate EQ settins are available ,, one for SSB, a second > for AM/FM modes. > > Filter TX set-up. > > FL1 - 13KHz -- set for FM TX > FL2 - 6KHz set for AM TX > FL3 – 2.8KHz – set for SSB / CW-DATA TX > > Has anyone else observed this issue? > > Solution? > > TIA de Ben W4SC > > Sent from Mail for Windows > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TX EQ issue
Hi Wayne, After searching I found info in the programmers manual that helped me understand how it works. It is a little hard to follow using the K3 / K3S owners manual, and / or Cady’s book. I have written a couple of macros, not yet checked out, that may work(?). Turn ESSB ON, SET TX EQ: ES1;TE-03+00+00+00+00+00+03+03; Mode must be SSB to turn ESSB ON, SET TX EQ Bins, Sets EQ for ESSB (USB, LSB), AM, and FM A “+” sign will appear in lower RH corner of display Turn ESSB OFF, SET TX EQ: ES0;TE-03+00+00+00+00+00-03-06; Turn ESSB OFF, SET TX EQ Bins for current mode Two Separate TX EQ, 1,(USB, LSB) or 2,(AM FM) Also I was able to effect the settings via the Main/Config menus…. Setting ESSB ON a single TX EQ is used for all voice modes. Setting ESSB OFF, the two TX EQ settings will be be available as described in the macro notes. I haven’t verified this with testing yet as to the actual effect… Also, not sure about the CW/DATA Modes….. I don’t see a macro command for that, but it is stated that CW/DATA TX-EQ is set “0”. 73 de Ben W4SC Sent from Mail for Windows From: Wayne Burdick Sent: Saturday, December 18, 2021 19:56 To: w4sc Cc: Elecraft Reflector Subject: Re: [Elecraft] TX EQ issue Hi Ben, Separate TX EQ for different voice modes has not yet been implemented. I'll make sure it's on the list. 73, Wayne N6KR > On Dec 18, 2021, at 8:59 AM, w4sc wrote: > > Having trouble setting TX-EQ for FM and SSB. Changing TX EQ when setting TX > EQ in FM mode, the TX EQ setting for SSB changes to what was set when in the > FM mode. This feature appears to not be working. > > Manual says two separate EQ settins are available ,, one for SSB, a second > for AM/FM modes. > > Filter TX set-up. > > FL1 - 13KHz -- set for FM TX > FL2 - 6KHz set for AM TX > FL3 – 2.8KHz – set for SSB / CW-DATA TX > > Has anyone else observed this issue? > > Solution? > > TIA de Ben W4SC > > Sent from Mail for Windows > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] TX EQ issue
Having trouble setting TX-EQ for FM and SSB. Changing TX EQ when setting TX EQ in FM mode, the TX EQ setting for SSB changes to what was set when in the FM mode. This feature appears to not be working. Manual says two separate EQ settins are available ,, one for SSB, a second for AM/FM modes. Filter TX set-up. FL1 - 13KHz -- set for FM TX FL2 - 6KHz set for AM TX FL3 – 2.8KHz – set for SSB / CW-DATA TX Has anyone else observed this issue? Solution? TIA de Ben W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Connecting the K4D to an external monitor
The PC would need a HDMI port configured as an INPUT device. The vast (ALL??) majority of LT and PCs hardware only have HDMI OUTPUT ports. An option would to have one of the monitors manually switchable between 2 of the HDMI sources. 73 de Ben W4SC Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KRX3 Mod
The mod information is in the KBPF3A installation instructions. It only required if you have a KBPF3A installed and want to RX VLF (i.e. 630M) Microsoft Word - E740265 KBPF3A Option Installation Rev A1.doc (elecraft.com) de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 Frequency Display
1) Ref pp 19 of K3S owners manual. 2) Make SURE the RJ45 is plugged in . You must heat the latch “click” plugging this cable in, or it may not be making connection. de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KBPF3A switching frequencies and performance
When setting installed/ NOT installed, make sure you reboot…. Ben Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KBPF3A switching frequencies and performance
Russ, Unfortunately, it appears you may have a defective KBPF3A. (Modified KBPF3). I actually see a slight increase in band noise below 1.7MHz with my K3S-100, which has KBPF3A installed. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FW: Elecraft K3/P3 last-time order
Several months ago there was a request for “Who is interested” in K3/K3S modules and accessories. I suspect if you did not express an interest, you may NOT have received the latest email of Monday 19 April with the link to an order page for making a half or full deposit on the items planned for “last build” activity. I don’t see this link on the Elecraft site, though it may appear later. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KBPF3A switching frequencies and performance
A little back ground,, The effort started as a result of my using WWV at 15.00 MHz for calibrating the reference oscillator. Tuning from 14.99 to 15.00 MHz I noticed a 9 to 12 Db drop in signal strength of WWV. I could hear relays’ switching at the 14.99 to 15.00 MHz boundary. This lead to making a list of (“suspected”) switching points by tuning from low 1MHz through 30MHz listening Looking at schematics of the KBPF3/A I heard switching at some points that did not make sense, with the 14.99 to 15.00 MHz boundary being one. It is not easy to probe the KBPF3A in my K3S-100 to check which relays are bein set/reset because of the installed KRX3A. I have a K3S-10, but will need to install a KBPF3/A to check the 14.99 to 15.00 MHz boundary and gather the information. (PENDING) de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KBPF3A switching frequencies and performance
Looking for details of switch over frequencies and expected performance of the KBPF3A in its various bands, There is improvement in the BCB and below 500KHz with the KBPF3A enabled, however the other SW BCB bands I have tried are lacking. Has anyone measured the performance of the KBPF3A? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 Failure, and question
I had a similar problem. I purchased a P3 kit in 2015, assembled, and it worked well. The firmware as received, was a rev behind. Trying to upgrade via the normal method, was unable to accomplish. Trying to force an upgrade, was unsuccessful. Had to return for warranty repair. The EEPROM was corrupted. All was OK until about 4 years ago, the P3, occasionally, would not boot up. I received some guidance from one of the engineers, to check a capacitor in the P3 power supply. If it was a tantalum (10 uF I believe), it was the incorrect value, and to change to 0.1uf (1206 sized). After the capacitor change, no more powerup issues. I believe there was a supply sequencing issue. I am looking for the details, and when found, I will post. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Diversity Question: RIT
Tom, I saw your post in Feb. Did you resolve your issue? De Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Repair Service
My update/repair took 4 months (June-October) end of last year, All of which I could done myself except for lack of alignment procedures, parts, proper rework, and test equipment. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KAT500 failure
Andy reported. “Several have asked for more detail. All I can share is that the command that repeatably caused my KAT500 to lockup does not cause a lockup when KAT firmware version 1.75 (current released version) is in use.” The possible paths to take are obvious: 1) UPDATE your firmware if older than rev 1.75. 2) If you have 1.75 installed AND experiencing a “lockup”, report the particulars to Elecraft support. Include complete and accurate detail. Read the firmware release notes for changes made that may have a bearing on your issue. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Just worked K6M with my KX2 ar 10W
Work K6M/8 LMS special event station on 7172. Got ‘1st call!!! Fun!!! De Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Why is my K3 off frequency?
Skip, I agree with all points you have made. Add to the check list the offset in the K3 Filter setup, verify it is set correctly. On 5 pole filters,, i.e. for SSB the standard 2.7KHz filter, allows an offset setting range of 0.00 to +- 9.99KHz (in 10Hz steps). The same check would apply to the 8 pole filters, which should be set to 0.00. These offsets are used by the f/w to set the operating frequency and proper carrier point on the filter slopes. Furthermore, I don’t understand why the NCS isn’t using his RIT, or operating in split mode, to “chase” stations he perceives to be “off frequency.” I think back to the past when no one had a digital frequency display to “get within” a couple of Hz of the desired frequency. Maybe he should be required to use a Swan 350 for a week or two?? 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 frequency entry
Read the manual;de W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4 10MHz Reference level??
Hello Elecraft K4 design team. Looking for spec defining requirements 10MHz Reference level for K4. Not in documentation?? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: Heavyweight Knobs for K3 SOLD!!
The knob has been sold via QTH.com Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: Heavyweight Knobs for K3
I have a CNC73 main tuning looking for a new home. Contact off list, 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 span changing
I have observed very similar occurrences. For example changing bands, if the center frequency was previously tuned to 10.000.00 MHz with a span of 20KHz, then changing to another band, say 20M or 40M, then back to 30M (10MHz), the center frequency will briefly appear in the upper left corner of the P3 display, as well as in the center of the display. It then corrects, with the proper LH-CENTER-RH ( 9.990.00 – 10.000.00 – 10.010.00 ) displayed. Occasionally the display will show ( 10.000.00 – 10.000.00 – 10.010.00 ) and not correct the display. Also the FILTER BAND PASS will appear on the left side of the display, remaining there. All of the communication to the P3 in this case is from the K3S. I have no computer or other device connected to the K3S/P3. Initiating a “CENTER” command via the P3 “BUTTON” will usually correct the issue…… Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DB15HD cable sopurce
A search on Amazon for “Amphenol CS-DSDHD 15-pin” returns a list of fully populated 1:!, shielded M/F and M/M cables sourced by Amphenol in various lengths from 2.5 to 25 feet ( plus some others). These are also sourced by Mouser and DigiKey and other suppliers in the US and Eu. The drawings are available for the cables on suppliers website. I like the availability of drawings to “see how it is wired”. Also cables that are supplied and have been verified to work in installations with equipment as in the “N6TV Y Box” Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Replacement Manuals
The K3S users manual is listed in “Parts and Mod kits” under “K3 line transceiver (K3-K3S) in the pull down menu under “K3S Books and Manuals” part # E740258_K3S_Owners_Manual for $34.95. Add it to the cart and pull out your plastic. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4HD Availability Schedule
Has estimated date of K4HD availability been revealed? Been looking……. Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Tx Spurious on Specific Frequencies on 160/80/40
Andy You may have a solution in hand for the spurious… The stiffener plate mod kit is still showing as available. I am wondering if there would be any improvement gained by grounding the crystal cans in a K3 with the plate, or even necessary. K3STFNR_K3 Synthesizer Stiffener Plate Kit – Elecraft Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Tx Spurious on Specific Frequencies on 160/80/40
Mike, That’s a good point. Is Andy referring to the stiffener or an additional shield around the crystals? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Tx Spurious on Specific Frequencies on 160/80/40
Andy, I would be interested as to what the shield looks like. I have a 73xx s/n that does not have the shield. At some point near the end of the their production, K3 was built with KSYN3A. How did you ‘ground’ the crystal cases? My radio came with the stiffener installed on the synthesizer. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: KSYN3A Upgrade Board
Randy Contact me off list Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA500+KAT500 interfacing
Google is your friend!!! ……….. There are several showing in a search… Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KIO2 12 volt regulator
If you look up the data sheet, and under “Absolute Maximum Values” will reveal a clue. The MAX 1406 shows a maximum value of 7 volts. Wouldn’t hold my breath on it working if 12V applied. There are other components involved also… Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 2m internal transverter PTT out
This is disappointing news. I just purchased a K3S-10 to use mainly as a uWave IF. I looked at the K144XV and KXV3B schematics. The fix will need to be implemented on the KXV3B. The K144XV uController monitors the 7R voltage from the baseboard, that is routed through KXV3B, and when this voltage is 0, the 5R voltage is turned off, and 5T ON, sending +5V out the BNC if it is strapped in. There is not a way for the K144XV to determine the transition out of the RX to the TX state was NOT intended for it. So the K144XV is being cycled RX/TX, enabled or not. I have determined a fix that would require 1 trace cut, 2 diodes, and 2 resistors, and 4 connections on the KXV3B. It is rather simple in circuit design concept, but may be physically difficult to implement. Possibly with SMT components and a very small PCB. I do not know how much room is available, or if the trace cut mentioned can be made. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA1500 / K3 Mystery
Jim, What were the actions taken before you performed the re-training. Did you CLEAR all of the ‘bins’? Ben W4SC. Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FW: K3S filter Problem
Bob, I tried to email you directly, but it ‘bounced.’ Are the filter Elecraft/Inrad made filters? I doubt the 2 filters are bad if they are Elecraft sourced. That would be the last to suspect. Make sure you have the MODE selected to receive that is enabled for the filter. Else try this; Load the K3 Utility, and select the Filter Setup menu. 1) Make sure the main receiver is selected. 2) On the two filters you have installed, UN-CHECK all of selectins. 3) Click the “APPLY” button. The K3 should do a reset, and reboot. 4) Once the K3 has rebooted, RE-ENABLE the 2 filters you installed. Should be for CW and DATA only. 5) Click “APPLY” button. The K3 should do a reset, and reboot. 6) Check operation of the 2 new filters. If the above fails, repeat the above but DISABLE ALL filters then RE-ENABLE filter configuration as you desire. I have a similar issue in that I cannot use the 2.8KHz filter for AM reception any longer since installing and enabling a 6KHz filter. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] AM RX Filter Selection issue
Added 6K Filter (required for AM transmit), been through filter configuration. Configuration for AM RX is desired for ability to select either 6K or 2.8K with WIDTH control. Filter selection of 2.8K does not occur with 2.8K width threshold. OK in SSB and DATA RX. Known issue? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ELECRAFT MACRO PROGRAMMING BOOK BY FRED CADY
I just was on chat with LuLu. They will NOT print the pdf offered, unless you are the author. They understood the desire to have a hard copy. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ELECRAFT MACRO PROGRAMMING BOOK BY FRED CADY
You may want to check with Lulu.com They may print you 1 copy for your use, which is allowed under US copyright law…. For an extra charge of course. I believe the procedure would be purchase the pdf, download it, the submit it through their web site tool for on demand printing… I was looking for the last version of the Cady K3S P3 book and purchased the pdf, but the found a printed copy, which I purchased. I want a macro-programming book also, and may try what I have outlined above. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Question about shipping.
It cost more to ship the shipping box to you for shipping your radio back to Elecraft than the shipping box cost. Worth it! Ben W4SC K3/K3S box with foam inserts $26 shipping Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 Pricing Posted
Gary, To top that off…. It is ALL in one box! De Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [P3] P3 CENTER frequency
>From Alan N1AL: The P3 does remember center frequency per band. However, if you tune the K3 VFO A to a frequency outside the old P3 display range, then the P3 center frequency is changed according to the rules specified by the "FixMode" menu setting. If you want the center frequency never to change no matter what frequency the K3 is set to, then set MENU:FixMode to "Static". Alan N1AL Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Screen save to memory stick
All, There is a selection (SVGA Ubmp) in the SVGA menus that will, according to the P3 manual, save a bmp file to a memory stick. Ref pp 43, 33 in the P3 Owners Manual Rev H1. Ben W4SC Sent from Mail for Windows 10 From: Barry Baines Sent: Saturday, September 26, 2020 21:52 To: Don Wilhelm Cc: Mike Flowers; w4sc; elecraft@mailman.qth.net Subject: Re: [Elecraft] SVGA Screen save to memory stick Don: On Sep 26, 2020, at 9:06 PM, Don Wilhelm wrote: Mike, Connector #22 is a USB port for a keyboard, not a general USB port. It is clearly labeled "KEYBOARD". You're absolutely correct to note the labeling and I’ve always presumed that is the connector is only for a keyboard. However, the "P3 HIgh-Performance Owner’s Manual" (Revision F, 11 JAN 16 p.12) does have this description of that connector: "KEYBOARD: USB jack for a USB keyboard or thumb drive (mass storage device). Apple keyboards are not supported at this time.” So the wording does suggest compatibility with thumb drives, but from what I can tell there is no discussion in the “Owner’s Manual" about how to utilize a thumb drive. Perhaps this may be a feature that was never actually developed. FWIW, Barry Baines, WD4ASW/1 (Currently in Boston/Roslindale, MA) 73, Don W3FPR On 9/26/2020 7:21 PM, Mike Flowers wrote: I have successfully captured a P3 screen image. Elecraft P3 Utility > Capture Image Tab> Capture Image button - this captures the image then displays 'Bitmap copied to Windows Clipboard' - then paste from the Clipboard into Paint or other app and save in the image format of your choice. My P3 manual states: "Connector openings {16}, {17}, {21}, and {22} are provided for future use." I think #22 is the USB port on the back of the P3. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Screen save to memory stick
Hello Jack, Vic, P3 / SVGA. I have tried at least 10 different USB memory sticks, sizes 64 MB (yes Mega, probably a USB 1.x?), 128MB, 4GB, …. through 64GB, all USB 2.0. I have tried formatting NTFS, FAT32, and ExFAT. On a couple of the sticks I get a “Cannot Initialize Device” error. With most sticks nothing happens, no error. Initiating a “Save”, nothing happens. All sticks work in Windows 10 machine with no problem. I can see a RED LED on SVGA module flashing continuously. I have reloaded all of the f/w today with no change. The f/w loaded is the current available, and I have the latest utility. The external display is 1920 x 1080 which I changed to last month. Any help appreciated. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] SVGA Screen save to memory stick
I’ve read the manual, tried at least 10 memory sticks (a very BAD location for the USB, some don’t fit because of VGA cable. What is the secret? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-POD Issues, But I Love It!
Seems putting the mode change first in the string would change the mode in the current operating band; then change bands…….. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-POD Issues, But I Love It!
A possible solution: 1) FA705;DE100;MD3; Check DExxx command in programmers manual. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K1ZTE - KAT500
I have the KAT/KPA500 setup with the K3. It works great when trained, tracking VFO. I had only one antenna available per band at the time using the setup. Currently the “shack” is undergoing a move and renovation. I will be back on with possibly as many as 3 antennas available on a single band. I have looked for answer to the following question. Is the training saved per-BAND/ANTENNA combination tuning solution?.. possibly resulting in 3 solutions per band. If there is only one solution there are implications in switching to a different antenna in a band with multiple antenna choices. In my case the future may hold a vertical, beam, and horizontal loop on 40M. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K1ZTE - KAT500
There may be a clue here https://kg3v.com/2019/03/03/cant-use-tune-button-on-ic-7300-with-kat-500-tuner/ Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3] KAT3 not functioning on 6m
Bill, The K3 only allows the “split” mode for SSB and/or CW to be enabled, at least from panel. Trying to enable split in any other mode, the VFO B window flashes “N/A”. You may have different indications / results if the split command is sent via the CAT, and a mode other than CW or SSB is selected. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3] KAT3 not functioning on 6m
Bill, I had an issue very similar. The “Automatic TXGain” procedure is performed at 52 MHz. I was using a 50 ohm load attached, and at 50.125 the KAT3 have trouble matching the load. Also it appears there is not enough power out in the lower part of the band for the SWR bridge to function. Part of the problem is I believe, the f/w switches the KPA3 ON at 8 watts instead of the usual 12……….. Performing a MANUAL TX Gain procedure on 6M may help. Here is link to post I made several weeks ago. https://www.mail-archive.com/elecraft@mailman.qth.net/msg241436.html 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 2 different 144MHz transveters and CAT selection
Henk, I looked at this issue and it is a K3/K3S issue. I was able to setup 2 transverters (XV1 and XV2) on the same band and switch between them when the band change was initiated from the K3 front panel. When a frequency is sent via RS232 connection, it appears the K3 wants to determine what band it should be on determined from the frequency. It begins this check without checking to determine if it does have a correct band already selected. The checking would appear to start with XV1, finding a “match” then switching to that band (XV1), even when XV2 is selected previously, and the frequency is correct. This is from my observation, and may be over simplified. The only solution I have determined is to access the config menu and turn XV1 OFF. XV2 will then be the first match for the frequency sent, and thus selected. I verified this issue using the RFSpace SDR-IQ and SpectraVue s/w, and in the K3 both XV1 and XV2 set for the 1296 band. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 2 different 144MHz transveters and CAT selection
Why not use the command “BN $” ?? This is a GET/SEL command, and has VFO select options. Reference Programmers manual. “BN 16” selects XVERTER 1 “BN 17” selects XVERTER 2 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 on 2 meters
The K144RFLK is showing as available on this page. However, clicking the item takes you to a page suggesting to “signup” on an interest list. https://elecraft.com/pages/k-line-transceiver-k3-k3s Also, to use an external 10MHz reference, K3EXREF is required. My K3S is currently in Watsonville for “final upgrading”, and two items to be installed are the K144XV and K144RFLK. If your K3 has been upgraded to KSYN3A, there is an additional mod that the KREF3 Reference Oscillator should undergo. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 latching relays and filter alignment
This relay is shown as a direct replacement on the Digikey website. Panasonic TQ2-L-5V. https://www.digikey.com/product-detail/en/omron-electronics-inc-emc-div/G6HU-2-DC5/Z3031-ND/369201 One may have better success in finding the Panasonic part in Eu. Elecraft service may be able to verify the part as a good replacement. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Bracket KPA3A E100719
I discovered Bracket KPA3A E100719 in the K3S spare parts list. It is not shown in any installation instructions. Anyone have an idea as to purpose and installation? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] For sale K3 with some K3S upgrades
Purchased this radio for a backup rig. Saving for a K4. Elecraft K3 (s/n 6995) with KAT3, KPA3, KRX3 sub RX, 8 pole filters (KFL3A-2.8, KFL3A-1.8, KFL3A-400) in main and sub receivers . K3S module updates include KSYN3As and KXV3B with 2nd pre-amp. Elecraft manuals, USB-RS232 adapter cable, KE7X "The Elecraft K3" book, MH2 microphone, DC cable, MFJ-4125 25A PS included. All you need is a "shack" and antenna. Checked out, excellent $2300 includes double boxed insured US ground shipping. Email off list for payment options. Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KRX3A Sync AM Mode K3S not working?
Sync AM mode appears to not be working. Been though B-Set selecting mode(s),, Not “tracking”, envelope detection OK. Latest firmware installed (5.67MCU and 2.88DSP). DSP f/w fix? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S & 2m Internal Transverter Calibration ProblemUsing External Reference
Are you seeing the 800Hz error in both band segments (144 and 146)? Looking at the schematics, there is an adjustment for each LO, but this must be a factory adjustment as there is no mention of them in manuals. Good to contact support. All would be interested in the resolution. 73 de Ben W4SC Sent from Mail for Windows 10 From: John Stengrevics Sent: Tuesday, August 11, 2020 21:54 To: w4sc Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S & 2m Internal Transverter Calibration ProblemUsing External Reference Ben, The K144XV & Phase lock calibration steps have already been performed. The problem arises when using an external reference oscillator. Elecraft support emailed. Thanks, John WA1EAZ On Aug 11, 2020, at 7:14 PM, w4sc wrote: Read the following: 1. K144XV manual pp20 2. K144XV Reference Oscillator Phase Lock Option Manual. Pp 11 Once the K3S 49MHz oscillator is calibrated, leave alone. The LOs (plural,,,116MHz and 118MHz) are locked to the 10MHz reference (which, depending where you are in the 2M band). If there is no 10MHz reference applied, keeping the desired accuracy may be impossible over a range of temperature. You should be able to attain +- 10Hx accuracy according to the K144XV manuals. If the 800Hz error cannot be corrected by the procedure outlined, I suggest contact Elecraft support. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S & 2m Internal Transverter Calibration Problem Using External Reference
Read the following: 1) K144XV manual pp20 2) K144XV Reference Oscillator Phase Lock Option Manual. Pp 11 Once the K3S 49MHz oscillator is calibrated, leave alone. The LOs (plural,,,116MHz and 118MHz) are locked to the 10MHz reference (which, depending where you are in the 2M band). If there is no 10MHz reference applied, keeping the desired accuracy may be impossible over a range of temperature. You should be able to attain +- 10Hx accuracy according to the K144XV manuals. If the 800Hz error cannot be corrected by the procedure outlined, I suggest contact Elecraft support. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Was Q and A from Erics K4 talk captured and posted?
Was Q and A from Erics talk captured and posted? Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] That's a whole lotta buttons and knobs!
My isp is blocking that link….. beware!! Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2NB Kit hiding in the closet unbuilt
KNB2 has been SOLD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2NB Kit hiding in the closet unbuilt
Another closet find. FOR SALE Unbuilt K2NB Noise Blanker Kit. Parts have been inventoried and is complete. Sell for $50 which includes shipping. Another “lock down” project for you. Please reply off list for payment options, 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3] Sub receiver intermittant failures
Ray If you have KSYN3A synthesizers installed, check for the following mod. Ref: KSYN3A Synthesized Installation Instructionspp 5 https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740257%20KSYN3A%20Installation%20Rev%20A6.pdf KREF3 Output Level Modification https://ftp.elecraft.com/K3/Mod%20Notes%20Alerts/E740278%20KREF3%20Output%20Level%20Modification.pdf Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] OT SpectraVue 3.39 crashes
Gregg If you have had a Win10 update lately, and the “NEW” Edge browser installed,, well,,!!!,,. I had an issue about 3 weeks ago after a Win10 dll became “missing” or corrupted. Reloaded C++ x86 redistrib package from MS fixed it. This may NOT be your issue. However I have noticed SpectraVue does not operate as smoothly as it once did, as the waterfall freezes momentarily when demod frequency is changed . Its run “priority” may be low now… I haven’t had time to look into this issue yet for a fix. I don’t believe it is an issue with S’Vue S/W you are having. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Schematics for KPA500 REV "B"
You are correct in your assertions,,, However you can/could/may have pwb changes to improve finished module performance, or cost, resulting in a new pwb with a lower rev level as its’ procurement part number would certainly change, and also resulting in a module assembly revision level change ( B to C?) and quite possibly an assembly part number and rev level change. It is all about tracking, and being able to determine (hopefully) what you are looking at and what documentation (schematics?) to relate to. Ben Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Schematics for KPA500 REV "B"
The “Rev” that is silkscreened on the board reflects the revision level of the bare board, NOT the assembly revision level of the module which will reflect changes made to the module and could any component, hardware, or circuit changes. The module revision level should be reflected on an attached label, written on the pwb (i.e. “ASSY C2”) in a conspicuous location, or not(?). Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Requesting help with computer issue -
1) IF HDMI make sure cable is connected properly, ie seated. My Laptop has connector issues. VGA shouldn’t have this problem. 2) Press F8 3) Selections should appear on RHS of screen 4) Arrow down to “Duplicate” then Laptop should be duplicated on monitor. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] TX LPGAIN issue on 6M K3 and K3S
I have a K3 and K3S and looking at this issue for a week now. K3 FW 5.66 KPA3 KAT3 K3S FW 5.67 KPA3A KAT3A ATN6 set Latest K3/K3S utility installed Test equipment includes HP 736 Wattmeter, Bird wattmeter, and a load with > 25db return loss. After running automated TX GAIN on either unit. K3 TX-LPGAIN is in range 12 – 16 K3S TX-LPGAIN is in range of 60-65 Exit TECH MD. SET ATU to AUTO Initiating a “ATU TUNE” on 52.000 MHZ the ATU finds a 1.2 match or better without issue. Setting the power control to 90W, the power out shown on the external wattmeter is 80 to 85W, with Tuner in AUTO or BYPASSED. Initiating a “ATU TUNE” lower in 6M band at 51.125 the ATU has trouble finding a match on both K3 and K3S. The K3 has more problems, and takes a lot longer. The resolved match on the K3 will be anywhere from 1.2 to 1.6, and setting power control to 90W, only 55 to 60 W is realized with Tuner in AUTO or BYPASSED. Running MANUAL TX LPGAIN only on 6M at 50.125 results in the following: K3 TX-LP GAIN is in the range of 62 to 70. K3S TX LPGAIN in in the range of 90 to 105. This appears to resolve the ATU matching issue (SWR < 1.2) and the lower power out (80 to 85W) at 50.125 MHZ Higher in the band at 52.000MHz operation appears to be the same. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K160RX K2 160 Meter and 2nd Ant Option SOLD
K160RX K2 160 Meter and 2nd Ant Option SOLD Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K160RX K2 160 Meter and 2nd Ant Option for sale
UNBUILT K160RX K2 160 Meter and 2nd Ant Option kit for sale. Parts inventoried this AM. Complete. You get to build it. Another closet find! $75 includes shipping US. Contact off list for payment options. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] SG4 coming
Is there a “SG4 Sweep and Signal Generator” coming with LF (300 or 400 KHz) coverage on the horizon? Any clues? 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3(s) main oscillator calibration
I agree 100%. However, the implication for using it for the reference oscillator calibration was / could be perceived as not a good way. John N8UR did an interesting study on the effects. https://www.febo.com/pages/hf_stability/ 73 Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3(s) main oscillator calibration
How much doppler shift should be expected? Sent from Mail for Windows 10 From: W2xj Sent: Saturday, June 6, 2020 5:31 PM To: w4sc Cc: wes_n...@triconet.org; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3(s) main oscillator calibration the problem with WWV is doppler shift. Sent from my iPad > On Jun 6, 2020, at 5:27 PM, w4sc wrote: > > I like the zero beat WWV method. Used it in the Navy to calibrate / PM the > 10MHz frequency standards aboard ship. Requires the least amount of test > equipment! If you can receive WWV on 20MHz to calibrate the K3/K3S, all the > better, > > Using a frequency counter I would think 0.1Hz resolution and attending > accuracy would be in order, plus an accurate time base in the counter, GPS > locked,,, or oven-ized, on all the time reference ,,, ect. > > Ben W4SC > > > Sent from Mail for Windows 10 > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w...@w2xj.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [OT] Birds and DX
Get a CAT to guard the antenna Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3(s) main oscillator calibration
I like the zero beat WWV method. Used it in the Navy to calibrate / PM the 10MHz frequency standards aboard ship. Requires the least amount of test equipment! If you can receive WWV on 20MHz to calibrate the K3/K3S, all the better, Using a frequency counter I would think 0.1Hz resolution and attending accuracy would be in order, plus an accurate time base in the counter, GPS locked,,, or oven-ized, on all the time reference ,,, ect. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 6M K3,, KAt3, GAIN-LP, Power Out issues
Having issues with one of my K3 on 6M. One has been resolved. FW 6.67 installed. KAT3 was having trouble finding a match into a -25db load at 50.125MHz. It would take several seconds to resolve To an SWR of anywhere from 1.2 to 1.7 indicated SWR. During the searching sequence the display would show -..- , but finally resolve and display the SWR. Pressing ATU Tune again would initiate another tuning sequence with the same results. The TX Gain Calibration was performed, with the same results. FW 5.66 installed. Since there was a fix in FW 5.67 to address the K3S 6M gain issue, FW 5.66 was re-installed. The above issue was still present. I performed TX Gain Calibration again, still no resolution. L10-C10 Removed from KAT3 After reading about the trap problem on the reflector, L10 and C10 were remove and a jumper installed. I found that the leads of the 2 capacitors that made up C10 were against the solder mask in very close contact with the surrounding ground. Performed TX Gain Calibration again. This seems to have fixed the KAT3 tuning issue. The KAT3 now resolves to a 1.2:1 to 1.3 SWR at 50.125, and no retuning / re-resolving to subsequent ATU Tune request Power out at 50.125 vs 52.000 I noted in the K3 Utility that the TX GAIN Calibration is performed at 52.000MHz. Requesting 100W at the power control resulted in a measurement of about 58W output at 50125MHz, and 84W at 52.000MHz. TXGAIN-LP Changing?? Through the Config Menu, I checked the TXGAIN-LP and TXGAIN-HP for 6M during this debug. TXGAIN HP was noted to be as the TXGAIN Calibration had set. TXGAIN Calibration values set would range 10 to 14. HOWEVER, TXGAIN-LP was changed from the initial setting to 87 at one point I have noted various values of TXGAIN-LP during this part of the debug, ranging from 70 to 89. Running TXGAIN Calibration will set it back to a value in the 10 to 14 range. Questions: Is there an issue with TXGAIN Calibration be performed at 52.000MHz that affects the lower part of the band? Is there an issue with the 6M Filter alignment? What is the center frequency of the alignment procedure? Test Equipment used: Bird Watt meter with appropriate element for power and frequency range. HP-436A Wattmeter with 8482 Sensor connected through 30db 100W attenuator. The two meter correlate very well within measurement tolerances. Anyone seen this before? Ben W4SC Power Out on 6M low? Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Spontaneous Failure
Jim, 1) Try an EEINIT ref pp66 of K3 owners manual rev D10. 2) Try to force a firmware down load, ref pp45 of K3 owners manual rev D10. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 Stuff from the closet SOLD SOLD
SOLD in record time about 15 secongs Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 Stuff from the closet
Found the following NOS K2 Option. Selling. $95 K2SB K2 Single Sideband Option w/K2KSB2 XTALS (14 Matched xtals) sealed $95 $75 EC2 Cabinet opened but never unpacked, panels still wrapped in brown paper with hardware bag. Includes shipping USPS insured. Reply off list please Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Problems with KRX3A
If the TMP cable was ever pulled on to unplug the connector, there is a better than even chance the center conductor is broken. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Problems with KRX3A
Ref pp 43 of KRX3 Istallation and User Guide Rev F Dec 22 2010 ALWAYS Set ANT = BNC if not connected to KAT3. Clarification:I believe config selection ANT=ATU may be inserting attenuation during transmit in the KRX3 signal path to provide protection. Make sure KSYN3 tmp connections good. I had the KRX3 “dead” issue on friends K3. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Problems with KRX3A
The config selection of ANT=BNC / ANT=MAIN does NOT actually select which is used for KRX3 alternate antenna input. When AUX input cable of the KRX3 is connected to the KAT3, the NON-TRANSMIT antenna used for the KRX3. Only one can be physically connected to be used by the KRX3. If no ATU, the only connection that is available would be to the installed BNC AUX connection. I believe this config selection may be inserting attenuation during transmit in the KRX3 signal path to provide protection. For KRX3 AUX input I would always build / config to use the BNC connection. There are 2 points of failure in the ATU that would be catastrophic for the KRX3 if either of 2 relays fail. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S and P3 book
The hard copy K3S and P3 book is not available from Elecraft now. LuLu offers a pdf but iwithout the TOC and Index, besides I want a hard copy. Anyone have a hard copy they are willing to sell? Please reply off-list. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 configuration printing?
Windows NotePad will open, and you should be able to print. Don’t change any settings/info and save because if you do the K3 utility probably will not open if you attempt a reload to the K3. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3] KAT3 not functioning on 6m
Bill Upgrading to KSYN3A, you should run the High Power TXGAIN Calibration according to the installation instructions. Actually, I had to run the WATTMETER, and BOTH the LP (5W) and HP (50W) calibrations to “cure” the same issue you are observing. Installing the KSYN3A in a K3 results in lower output on 6M when the KPA3 is active, i.e. the requested power is greater than 12W. When the power requested is less than 12W, the KPA3 is inactive (bypassed), the output power is within measuremt accuracy on an external wattmeter to what is requested by the K3 power setting control. When the power requested is greater than 12 W, i.e. 100W for example, what I have observed is at 52.000MHz the external wattmeter reads 85W, and at 50.500MHz only 63W is realized. There is little difference in the output power measured in each case with/without KAT3 tuner “bypassed” or “enabled and matched” at the operating frequency’s outlined above. It appears that this anomaly occurs only on 6M, I don’t know if there is a solution or fix for the above. K3 F/W 5.67 Load 100W 30Db attenuator Wattmeter HP736 with 8481 power sensor and Bird with appropriate elements. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA3 E100719 Bracket?
As the K3S has been discontinued, looking over the “Parts and Mods” I see “E100719 Bracket KPA3A” listed. Having recently upgraded from 10W to a 100W radio by adding the KPA3A kit, I don’t see this bracket in the instructions, nor find any instructions for its installation. Anyone know what ill this bracket cures, installation instructions, ect.? Ben -- W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Excel Test
In Office 365 (Excel) the “Save As” file types include both ‘text (MS-DOS) .txt, and ‘pdf’ and many other types. Saving as ‘txt’ will allow opening of the generated txt file, then to copy and paste into an email. The following 4 lines were originally in an excel file, converted to a txt, then copied from the txt file into this email. 1.2G 19-Oct-2019 0349 579 DL3EBJ 579 1.2G 19-Oct-2019 0357 589 G3LTF 579 1.2G 19-Oct-2019 0402 559 SP7DCS 559 1.2G 19-Oct-2019 0412 589 SP6JLW 579 I no longer have MS-Excel to see if this is possible using that sw. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 - PX3 Interconnects Lengths
Has anyone located SHORTER cables for interconnects KX3 – PX3. With the lengths supplied there is a big “wad” of cables remaining and in the way for the above/below stacking I have. Eight (8”) cables would more than suffice. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 VFO-B knob replacement notes
Two possible replacements. Not exact appearance to original, but both are 1.25 inch diameter, and about 0.7 inch tall. Very close to original measurements. This one is plastic. Drawing available online. https://www.digikey.com/product-detail/en/davies-molding-llc/8125-B/1722-1087-ND/6566310 This one is aluminum, and more expensive. https://www.digikey.com/product-detail/en/te-connectivity-alcoswitch-switches/KN1251B1-4/KN1251B1-4-ND/1201555 And possibly this one https://www.digikey.com/product-detail/en/te-connectivity-alcoswitch-switches/KD1250B1-4/KD1250B1-4-ND/1201657 If they would work as satisfactory replacements, IMO it would be better than having to disassemble the front panel. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 LPA failure, again
Martin, Thanks for posting your findings and solution. 73 Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] new revision of KPA500 LPF T_R Switching rework Rev.E guide available
I have serial # 1866. I am the second owner, and Elecraft paperwork I received with the unit shows the unit was returned to Elecraft for “PA DISS Fault on 20M and 6M, with D10 and L6 being replace. In addition , under warrantee, the T/R switch was updated ( Rev E?? ), and the 12M mod was performed. There are NO details as to exactly what was replaced. There is no indication as to what the NEW rev level of the LPF would be as a result. The upshot of all this is, if you have an earlier s/n, the above may apply! 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500 - KAT500 stopping K3 boot
Is there an issue with the KPA500 being OFF with power up -> booting of the K3? Does it need to be actually powered up, i.e. and in operational state? OR is just having it in the “sleeping” state (REAR switch ON, FRONT PANEL SW-OFF) OK? I know about KAT500 and AUX-BUSS stopping K3 bootup, and have an “automatic” solution that works great. Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com