Skip, I agree with all points you have made.
Add to the check list the offset in the K3 Filter setup, verify it is set correctly. On 5 pole filters,, i.e. for SSB the standard 2.7KHz filter, allows an offset setting range of 0.00 to +- 9.99KHz (in 10Hz steps). The same check would apply to the 8 pole filters, which should be set to 0.00. These offsets are used by the f/w to set the operating frequency and proper carrier point on the filter slopes. Furthermore, I don’t understand why the NCS isn’t using his RIT, or operating in split mode, to “chase” stations he perceives to be “off frequency.” I think back to the past when no one had a digital frequency display to “get within” a couple of Hz of the desired frequency. Maybe he should be required to use a Swan 350 for a week or two?? 73 de Ben W4SC Sent from Mail for Windows 10 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com