Re: [Elecraft] K3 + Heil HC4
Oops. Thanks for catching that. I must have turned it on when I was looking at the settings. 73, Mike Ian Maude wrote: > You do not want bias on for a HC4, it is a dynamic insert. > > 73 Ian > > -- > Ian J Maude, G0VGS > SysOp GB7MBC & HB9DRV-9 DX Clusters > Member RSGB, GQRP 9838, FISTS 14077 | K3 #455 > http://www.amateurradiotraining.org > > > 2009/12/24 Mike mailto:n...@nf4l.com>> > > Do you have MENU:MIC SEL set to FP.H? BIAS on? Mic gain on my > setup is 25. > > I put an ohmeter on the adapter, and pin 1 is the hot lead, pin 7 is > ground. Are you sure you're looking at the pins correctly? > Looking into the connector on the front of the K3, pin 1 is on the > left > of the key "bump" and pin 7 is on the right. The pins are numbered > anti-clockwise from 1 to 7, with 8 being in the middle. I don't think > the Heil adapter has anything inside the shell, no extra components. > > 73, Mike > > ki4...@msn wrote: > > Hello Mike, > > > > Thanks for the link. I looked at Mic connector pinout, 1 and > 7 are used > > for MIC , it is the same as K3, so I wired HC4 Mic jack tip > (hot ) to 1 > > and common(ground) to ground pin 7 , that did not work ! > > I would expect some more components between K3 Mic and > HC4.If it is > > only wiring then I have done correctly , must be something else > I missed. > > > > 73 > > > > Sejo , N3UA > > > > -Original Message- > > From: Mike [mailto:n...@nf4l.com <mailto:n...@nf4l.com>] > > Sent: Wednesday, December 23, 2009 7:15 PM > > To: n3ua > > Cc: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net> > > Subject: Re: [Elecraft] K3 + Heil HC4 > > > > Here's a .pdf of a Kenwood TS-850. The pinout for the mic is on > p. 13. > > > > http://www.qsl.net/dk9ip/850IM/850im.pdf > > > > 73, Mike NF4L > > > > n3ua wrote: > > > >> Thanks everyone who responded, looks like my problem is Kenwood > >> > > Adapter. > > > >> Don't have one , wired directly from Heil mic jack 3.5mm tip > to K3 Mic > >> connector pin 1 and ground to ground -pin 7 (8). > >> Does anyone have Kenwood adapter schematic? > >> > >> Thanks > >> > >> 73 > >> > >> N3UA > >> > >> > > > > > > > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > <mailto:Elecraft@mailman.qth.net> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
You do not want bias on for a HC4, it is a dynamic insert. 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC & HB9DRV-9 DX Clusters Member RSGB, GQRP 9838, FISTS 14077 | K3 #455 http://www.amateurradiotraining.org 2009/12/24 Mike > Do you have MENU:MIC SEL set to FP.H? BIAS on? Mic gain on my setup is 25. > > I put an ohmeter on the adapter, and pin 1 is the hot lead, pin 7 is > ground. Are you sure you're looking at the pins correctly? > Looking into the connector on the front of the K3, pin 1 is on the left > of the key "bump" and pin 7 is on the right. The pins are numbered > anti-clockwise from 1 to 7, with 8 being in the middle. I don't think > the Heil adapter has anything inside the shell, no extra components. > > 73, Mike > > ki4...@msn wrote: > > Hello Mike, > > > > Thanks for the link. I looked at Mic connector pinout, 1 and 7 are > used > > for MIC , it is the same as K3, so I wired HC4 Mic jack tip (hot ) to > 1 > > and common(ground) to ground pin 7 , that did not work ! > > I would expect some more components between K3 Mic and HC4.If it is > > only wiring then I have done correctly , must be something else I > missed. > > > > 73 > > > > Sejo , N3UA > > > > -Original Message- > > From: Mike [mailto:n...@nf4l.com] > > Sent: Wednesday, December 23, 2009 7:15 PM > > To: n3ua > > Cc: elecraft@mailman.qth.net > > Subject: Re: [Elecraft] K3 + Heil HC4 > > > > Here's a .pdf of a Kenwood TS-850. The pinout for the mic is on p. 13. > > > > http://www.qsl.net/dk9ip/850IM/850im.pdf > > > > 73, Mike NF4L > > > > n3ua wrote: > > > >> Thanks everyone who responded, looks like my problem is Kenwood > >> > > Adapter. > > > >> Don't have one , wired directly from Heil mic jack 3.5mm tip to K3 Mic > >> connector pin 1 and ground to ground -pin 7 (8). > >> Does anyone have Kenwood adapter schematic? > >> > >> Thanks > >> > >> 73 > >> > >> N3UA > >> > >> > > > > > > > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
Do you have MENU:MIC SEL set to FP.H? BIAS on? Mic gain on my setup is 25. I put an ohmeter on the adapter, and pin 1 is the hot lead, pin 7 is ground. Are you sure you're looking at the pins correctly? Looking into the connector on the front of the K3, pin 1 is on the left of the key "bump" and pin 7 is on the right. The pins are numbered anti-clockwise from 1 to 7, with 8 being in the middle. I don't think the Heil adapter has anything inside the shell, no extra components. 73, Mike ki4...@msn wrote: > Hello Mike, > > Thanks for the link. I looked at Mic connector pinout, 1 and 7 are used > for MIC , it is the same as K3, so I wired HC4 Mic jack tip (hot ) to 1 > and common(ground) to ground pin 7 , that did not work ! > I would expect some more components between K3 Mic and HC4.If it is > only wiring then I have done correctly , must be something else I missed. > > 73 > > Sejo , N3UA > > -Original Message- > From: Mike [mailto:n...@nf4l.com] > Sent: Wednesday, December 23, 2009 7:15 PM > To: n3ua > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 + Heil HC4 > > Here's a .pdf of a Kenwood TS-850. The pinout for the mic is on p. 13. > > http://www.qsl.net/dk9ip/850IM/850im.pdf > > 73, Mike NF4L > > n3ua wrote: > >> Thanks everyone who responded, looks like my problem is Kenwood >> > Adapter. > >> Don't have one , wired directly from Heil mic jack 3.5mm tip to K3 Mic >> connector pin 1 and ground to ground -pin 7 (8). >> Does anyone have Kenwood adapter schematic? >> >> Thanks >> >> 73 >> >> N3UA >> >> > > > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
This link should help with many of the mics floating about in hamdom: http://homepage.ntlworld.com/rg4wpw/date.html 73, Julius Mike-14 wrote: > > Here's a .pdf of a Kenwood TS-850. The pinout for the mic is on p. 13. > > http://www.qsl.net/dk9ip/850IM/850im.pdf > > 73, Mike NF4L > > n3ua wrote: >> Thanks everyone who responded, looks like my problem is Kenwood >> Adapter. >> Don't have one , wired directly from Heil mic jack 3.5mm tip to K3 Mic >> connector pin 1 and ground to ground -pin 7 (8). >> Does anyone have Kenwood adapter schematic? >> >> Thanks >> >> 73 >> >> N3UA >> > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > - Julius Fazekas N2WN Tennessee Contest Group http://www.k4ro.net/tcg/index.html Tennessee QSO Party http://www.tnqp.org/ Elecraft K2/100 #4455 Elecraft K3/100 #366 Elecraft K3#1875 -- View this message in context: http://n2.nabble.com/K3-Heil-HC4-tp4207333p4211636.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
Here's a .pdf of a Kenwood TS-850. The pinout for the mic is on p. 13. http://www.qsl.net/dk9ip/850IM/850im.pdf 73, Mike NF4L n3ua wrote: > Thanks everyone who responded, looks like my problem is Kenwood Adapter. > Don't have one , wired directly from Heil mic jack 3.5mm tip to K3 Mic > connector pin 1 and ground to ground -pin 7 (8). > Does anyone have Kenwood adapter schematic? > > Thanks > > 73 > > N3UA > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
Thanks everyone who responded, looks like my problem is Kenwood Adapter. Don't have one , wired directly from Heil mic jack 3.5mm tip to K3 Mic connector pin 1 and ground to ground -pin 7 (8). Does anyone have Kenwood adapter schematic? Thanks 73 N3UA -- View this message in context: http://n2.nabble.com/K3-Heil-HC4-tp4207333p4211036.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
You say the rear panel settings work - put those same settings on the FP mic menu and try it. If a condenser mic element works on the FP, then you must have Bias set on - turn it off for the HC-4 and set the range to H. You must have the Kenwood adapter to use the front panel connector. IIRC, the color band for the Kenwood adapter is red. 73, Don W3FPR n3ua wrote: > I am unable to get Heil HC4 working connected to K3 front panel.Tried > FP.H/FP.L with bias on and off but no luck !??. > Connected cheap Condenser Microphone Element on FP - worked great. On rear > panel HC4 works fine. Any idea ? > > Thanks > > N3UA > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
Works very well in mine. 73, Mike NF4L Jorge Diez - CX6VM wrote: > Hello, > > Heil ProSet with kenwood adapter will work 100% in the K3?? > > Thanks, > Jorge > CX6VM > > -Mensaje original- > De: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] En nombre de Ian Maude > Enviado el: Miércoles, 23 de Diciembre de 2009 06:40 a.m. > Para: n3ua > CC: elecraft@mailman.qth.net > Asunto: Re: [Elecraft] K3 + Heil HC4 > > My guess would be that you have the wrong adapter. It needs to be the > Kenwood one. The settings should be FP-H and no bias. > > 73 Ian > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
Hello, Heil ProSet with kenwood adapter will work 100% in the K3?? Thanks, Jorge CX6VM -Mensaje original- De: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] En nombre de Ian Maude Enviado el: Miércoles, 23 de Diciembre de 2009 06:40 a.m. Para: n3ua CC: elecraft@mailman.qth.net Asunto: Re: [Elecraft] K3 + Heil HC4 My guess would be that you have the wrong adapter. It needs to be the Kenwood one. The settings should be FP-H and no bias. 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC & HB9DRV-9 DX Clusters Member RSGB, GQRP 9838, FISTS 14077 | K3 #455 http://www.amateurradiotraining.org 2009/12/23 n3ua > > I am unable to get Heil HC4 working connected to K3 front panel.Tried > FP.H/FP.L with bias on and off but no luck !??. > Connected cheap Condenser Microphone Element on FP - worked great. On > rear > panel HC4 works fine. Any idea ? > > Thanks > > N3UA > -- > View this message in context: > http://n2.nabble.com/K3-Heil-HC4-tp4207333p4207333.html > Sent from the Elecraft mailing list archive at Nabble.com. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.430 / Virus Database: 270.14.117/2581 - Release Date: 12/22/09 08:09:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + Heil HC4
My guess would be that you have the wrong adapter. It needs to be the Kenwood one. The settings should be FP-H and no bias. 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC & HB9DRV-9 DX Clusters Member RSGB, GQRP 9838, FISTS 14077 | K3 #455 http://www.amateurradiotraining.org 2009/12/23 n3ua > > I am unable to get Heil HC4 working connected to K3 front panel.Tried > FP.H/FP.L with bias on and off but no luck !??. > Connected cheap Condenser Microphone Element on FP - worked great. On > rear > panel HC4 works fine. Any idea ? > > Thanks > > N3UA > -- > View this message in context: > http://n2.nabble.com/K3-Heil-HC4-tp4207333p4207333.html > Sent from the Elecraft mailing list archive at Nabble.com. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 + Heil HC4
I am unable to get Heil HC4 working connected to K3 front panel.Tried FP.H/FP.L with bias on and off but no luck !??. Connected cheap Condenser Microphone Element on FP - worked great. On rear panel HC4 works fine. Any idea ? Thanks N3UA -- View this message in context: http://n2.nabble.com/K3-Heil-HC4-tp4207333p4207333.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
