Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
Yes APF came out reel good, very well done! Don´t even know if it was this good on the FT-1000D, at least not on the units I did own. Now if only AM RX was to be fixed I would be happy, as it is right now AM (not sync AM) RX is more or less useless. It "got broken" in the DSP code way back. I have written about this problem before and I´m not going to repeat myself any further. / Jim SM2EKM - On 2010-11-04 00:17, Bill [NS4C] wrote: > > I loaded the beta firmware so I could see what all the APF buzz was about. > 3D2A was spotted on 18070 so I turned the beam and he was there in and out > of my noise level. I turned on the new APF function and peaked the CW > signal. He was now 100% copy. Turned APF off and he was in and out of my > noise level again. Now I understand how good of a tool APF is for weak > signal CW. BTW The 3D2A is in my log. > > Many thanks Elecraft, > > 73 Bill NS4C > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
I would also like to thank the Elecraft crew for another great enhancement. I updated the firmware a few minutes before a local traffic net here. During the net, I was asked to receive 6 messages from a weak station. With both the NR and APF turned on, a marginal situation became solid copy. BTW, this is my 47th firmware update since Beta 2-1 in June, 2008. I have never had an issue. 73, John W2XS -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Beta-Release-APF-for-CW-Fast-Monitor-improved-TX-gate-for-voice-modes-tp5703317p5704065.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
On Wed, 03 Nov 2010 21:20:44 -0400, "Joe Subich, W4TV" wrote: I agree with you Joe. Long Hold would be my preference. Tom Radio Amateur N5GE > >>> To use APF, make sure CONFIG:DUAL PB is set to APF. (This is the >>> default. NOR restores the original DUAL PB function.) > >Given the value of both APF and Dual PB filters, the "menu dance" >to switch between the two is a very big drag. Please provide a >way to select either function (I'd suggest "Hold" and "Long Hold" >as used with Link/Diversity) without resorting to the CONFIG >menu. > >73, > >... Joe, W4TV > >On 11/3/2010 4:05 PM, Wayne Burdick wrote: >> K3 beta-test firmware revision 4.17 (with DSP rev. 2.65) is now >> available. This release includes our new APF (audio peaking filter) >> for CW mode, which has been helping K3 field testers work "extreme" >> weak DX for the past several days. >> >> For voice modes, there's a "Fast Monitor" option (TX voice monitor >> without the processing delay). Also included is a much-improved TX >> Noise Gate. >> >> See detailed release notes below. >> >> Please send any questions to k3supp...@elecraft.com. For instructions >> on how to load beta firmware, see: >> >>http://www.elecraft.com/K3/k3_software.htm >> >> 73, >> Wayne >> N6KR >> >> * * * >> >> MCU 4.17 / DSP 2.65 / FPF 1.14, 11-2-2010 >> >> NOTE: Be sure to install all firmware files for this release, >> including FPF 1.14. Otherwise your menu text will be incorrect. >> >> * APF (AUDIO PEAKING FILTER) ADDED: APF provides enhanced >> copy of weak signals in CW mode, and is especially useful when >> signals are at the noise level. The K3s APF is patterned after >> the most successful analog APF implementations, and is equally >> effective in user tests. To use APF, make sure CONFIG:DUAL PB >> is set to APF. (This is the default. NOR restores the original DUAL PB >> function.) Then hold DUAL PB to turn APF on/off. A special DSP >> graphic display is used to show that APF is in effect. At the time >> APF is activated, the regular I.F. SHIFT setting, if any, is frozen, >> and SHIFT then controls the center pitch of the APF filter in 10-Hz >> steps. APF is independent for the main and sub receivers, as well >> as for presets I and II. Switching between these two presets is a >> convenient way of turning APF on/off quickly. >> >> * ADDED VOICE TX FAST MONITOR: Normally the voice >> monitor includes a ~20-ms delay, which is necessary to hear how your >> on-air signal will sound (with compression, etc.). If you prefer to not >> hear any delay in the voice monitor, set CONFIG:TX MON to FAST. >> Note: Youll still hear the delayed and processed monitor if you >> adjust the MIC, CMP, TX EQ or TX GATE settings while transmitting. >> >> * TX NOISE GATE IMPROVEMENT: The Noise Gate/Downward >> Expander for voice modes has smoother response and much >> improved performance near the threshold. >> >> * NARROW AF FILTER IMPROVEMENT: Adjusting SHIFT and >> WIDTH when using very narrow DSP filters no longer causes >> pop artifacts. >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
>> To use APF, make sure CONFIG:DUAL PB is set to APF. (This is the >> default. “NOR” restores the original DUAL PB function.) Given the value of both APF and Dual PB filters, the "menu dance" to switch between the two is a very big drag. Please provide a way to select either function (I'd suggest "Hold" and "Long Hold" as used with Link/Diversity) without resorting to the CONFIG menu. 73, ... Joe, W4TV On 11/3/2010 4:05 PM, Wayne Burdick wrote: > K3 beta-test firmware revision 4.17 (with DSP rev. 2.65) is now > available. This release includes our new APF (audio peaking filter) > for CW mode, which has been helping K3 field testers work "extreme" > weak DX for the past several days. > > For voice modes, there's a "Fast Monitor" option (TX voice monitor > without the processing delay). Also included is a much-improved TX > Noise Gate. > > See detailed release notes below. > > Please send any questions to k3supp...@elecraft.com. For instructions > on how to load beta firmware, see: > >http://www.elecraft.com/K3/k3_software.htm > > 73, > Wayne > N6KR > > * * * > > MCU 4.17 / DSP 2.65 / FPF 1.14, 11-2-2010 > > NOTE: Be sure to install all firmware files for this release, > including FPF 1.14. Otherwise your menu text will be incorrect. > > * APF (AUDIO PEAKING FILTER) ADDED: APF provides enhanced > copy of weak signals in CW mode, and is especially useful when > signals are at the noise level. The K3’s APF is patterned after > the most successful analog APF implementations, and is equally > effective in user tests. To use APF, make sure CONFIG:DUAL PB > is set to APF. (This is the default. “NOR” restores the original DUAL PB > function.) Then hold DUAL PB to turn APF on/off. A special DSP > graphic display is used to show that APF is in effect. At the time > APF is activated, the regular I.F. SHIFT setting, if any, is “frozen,” > and SHIFT then controls the center pitch of the APF filter in 10-Hz > steps. APF is independent for the main and sub receivers, as well > as for presets I and II. Switching between these two presets is a > convenient way of turning APF on/off quickly. > > * ADDED VOICE TX “FAST MONITOR”: Normally the voice > monitor includes a ~20-ms delay, which is necessary to hear how your > on-air signal will sound (with compression, etc.). If you prefer to not > hear any delay in the voice monitor, set CONFIG:TX MON to FAST. > Note: You’ll still hear the delayed and processed monitor if you > adjust the MIC, CMP, TX EQ or TX GATE settings while transmitting. > > * TX NOISE GATE IMPROVEMENT: The Noise Gate/Downward > Expander for voice modes has smoother response and much > improved performance near the threshold. > > * NARROW AF FILTER IMPROVEMENT: Adjusting SHIFT and > WIDTH when using very narrow DSP filters no longer causes > ‘pop’ artifacts. > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
WOW!! I wondered who the pile up was for around 14017 or so. Tuning down a couple, I heard an S[minus]1 signal I couldn't make out, sounded like 9A something, sometimes GT[?]. Figuring there wouldn't be a huge pileup on a 9A, I engaged APF. Right out of the noise, maybe S3 and easily copyable was 9U0A. As usual, K6RIM beat me to him. I'm still digesting all the NR/NB/AGC stuff "The Smiths" sent me, I'm thinking this can only get better. Nice going guys! 73, Fred K6DGW - Northern California Contest Club - CU in the 2011 Cal QSO Party 1-2 Oct 2011 - www.cqp.org On 11/3/2010 1:05 PM, Wayne Burdick wrote: > K3 beta-test firmware revision 4.17 (with DSP rev. 2.65) is now > available. This release includes our new APF (audio peaking filter) > for CW mode, which has been helping K3 field testers work "extreme" > weak DX for the past several days. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
I loaded the beta firmware so I could see what all the APF buzz was about. 3D2A was spotted on 18070 so I turned the beam and he was there in and out of my noise level. I turned on the new APF function and peaked the CW signal. He was now 100% copy. Turned APF off and he was in and out of my noise level again. Now I understand how good of a tool APF is for weak signal CW. BTW The 3D2A is in my log. Many thanks Elecraft, 73 Bill NS4C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
* On 2010 03 Nov 15:06 -0500, Wayne Burdick wrote: > K3 beta-test firmware revision 4.17 (with DSP rev. 2.65) is now > available. This release includes our new APF (audio peaking filter) > for CW mode, which has been helping K3 field testers work "extreme" > weak DX for the past several days. Hi Wayne, never having used this sort of function before, I am pleased with how well it works just the few minutes of playing with it. Thanks much. > * NARROW AF FILTER IMPROVEMENT: Adjusting SHIFT and > WIDTH when using very narrow DSP filters no longer causes > ‘pop’ artifacts. Perhaps I had not noticed them before, but in tweaking on CW using the WIDTH control, I can hear a slight audio pop on occasion which sounds a bit like a scratchy pot and is certainly not the slight drop in audio as the filters are switched in and out. I notice it only when going from 150 to 100 Hz bandwidth but not back again. It does not do it all the time, however. I can repeat it if I widen to about 450 Hz and then narrow it back down to 100 Hz and the slight "tick" is there each time the switch is made from 150 to 100 Hz. My K3 is a single receiver with 2.7, 2.1 kHz, and 500 and 200 Hz filters installed. BTW, are there filter plots for the Elecraft 5 pole filter available? 73, de Nate >> -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Ham radio, Linux, bikes, and more: http://n0nb.us/index.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
On Wed, 3 Nov 2010 13:05:55 -0700, Wayne Burdick wrote: Good Lord!! I'm setting here with a very weak carrier tuned in on 10m that is barely detectable in the noise with my 250 CW filter set to 50hz. When I turn the APF on it jumps out of the noise and actually sounds like an s-5 or s-6 signal!!! What a wonderful addition for CW operators. GOOD WORK! Thanks, Tom Radio Amateur N5GE >K3 beta-test firmware revision 4.17 (with DSP rev. 2.65) is now >available. This release includes our new APF (audio peaking filter) >for CW mode, which has been helping K3 field testers work "extreme" >weak DX for the past several days. [snip] __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
Hello Knut: I tried it with FireFox and I.E. 9 (beta) and it downloaded just fine with either. Can't test I.E. 8 - I no longer have it installed. Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ab2tc Sent: Wednesday, November 03, 2010 2:22 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes Hi, For the first time ever I am not able to download the zip file. As soon as I click "save target as", Explorer complains about not being able to download the file and something about "server returned extended information". Several attempts yielded the same results. Anybody else have this problem? AB2TC - Knut juergen piezo wrote: > > Hi Wayne > > The APF is fantastic. This is the best enhancement to the K3's receiver > ever. > > The APF performance puts the K3 ahead of every other radio on CW receive. > There is just no comparison. Anyone not using a K3 with the APF will be at > a huge disadvantage in a contest. > > The APF is scary with its potential. This is the first time that a DSP > ënhancement has impressed me. > > 73 > John > > > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc-improvements-tp3983997p5703302.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
Thanks so much, Wayne, Lyle and the Elecraft crew who worked on this, and thanks to the alpha and early beta testers. I downloaded the beta version earlier this afternoon and used it for a couple of hours of CW operation. Fantastic! Have not had anything like this since my FT-1000 days. My 7800 APF is a virtual joke. Again, Elecraft continues to provide continuous improvements and enhancements to an already great radio. The K3 continues to morph into the most flexible and option packed piece of equipment I have owned. 73 and thanks again to all for their work and ideas that went into this including the many members here who gave input. Greg K2UM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
Hi, For the first time ever I am not able to download the zip file. As soon as I click "save target as", Explorer complains about not being able to download the file and something about "server returned extended information". Several attempts yielded the same results. Anybody else have this problem? AB2TC - Knut juergen piezo wrote: > > Hi Wayne > > The APF is fantastic. This is the best enhancement to the K3's receiver > ever. > > The APF performance puts the K3 ahead of every other radio on CW receive. > There is just no comparison. Anyone not using a K3 with the APF will be at > a huge disadvantage in a contest. > > The APF is scary with its potential. This is the first time that a DSP > ënhancement has impressed me. > > 73 > John > > > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc-improvements-tp3983997p5703302.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
Hi Wayne The APF is fantastic. This is the best enhancement to the K3's receiver ever. The APF performance puts the K3 ahead of every other radio on CW receive. There is just no comparison. Anyone not using a K3 with the APF will be at a huge disadvantage in a contest. The APF is scary with its potential. This is the first time that a DSP ënhancement has impressed me. 73 John --- On Wed, 11/3/10, Wayne Burdick wrote: > From: Wayne Burdick > Subject: [Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX > gate for voice modes > To: "Elecraft Reflector" , > elecraft...@yahoogroups.com, elecr...@yahoogroups.com > Date: Wednesday, November 3, 2010, 1:05 PM > K3 beta-test firmware revision 4.17 > (with DSP rev. 2.65) is now > available. This release includes our new APF (audio peaking > filter) > for CW mode, which has been helping K3 field testers work > "extreme" > weak DX for the past several days. > > For voice modes, there's a "Fast Monitor" option (TX voice > monitor > without the processing delay). Also included is a > much-improved TX > Noise Gate. > > See detailed release notes below. > > Please send any questions to k3supp...@elecraft.com. > For instructions > on how to load beta firmware, see: > > http://www.elecraft.com/K3/k3_software.htm > > 73, > Wayne > N6KR > > * * * > > MCU 4.17 / DSP 2.65 / FPF 1.14, 11-2-2010 > > NOTE: Be sure to install all firmware files for this > release, > including FPF 1.14. Otherwise your menu text will be > incorrect. > > * APF (AUDIO PEAKING FILTER) ADDED: APF provides enhanced > copy of weak signals in CW mode, and is especially useful > when > signals are at the noise level. The K3’s APF is patterned > after > the most successful analog APF implementations, and is > equally > effective in user tests. To use APF, make sure CONFIG:DUAL > PB > is set to APF. (This is the default. “NOR” restores the > original DUAL PB > function.) Then hold DUAL PB to turn APF on/off. A special > DSP > graphic display is used to show that APF is in effect. At > the time > APF is activated, the regular I.F. SHIFT setting, if any, > is “frozen,” > and SHIFT then controls the center pitch of the APF filter > in 10-Hz > steps. APF is independent for the main and sub receivers, > as well > as for presets I and II. Switching between these two > presets is a > convenient way of turning APF on/off quickly. > > * ADDED VOICE TX “FAST MONITOR”: Normally the voice > monitor includes a ~20-ms delay, which is necessary to hear > how your > on-air signal will sound (with compression, etc.). If you > prefer to not > hear any delay in the voice monitor, set CONFIG:TX MON to > FAST. > Note: You’ll still hear the delayed and processed monitor > if you > adjust the MIC, CMP, TX EQ or TX GATE settings while > transmitting. > > * TX NOISE GATE IMPROVEMENT: The Noise Gate/Downward > Expander for voice modes has smoother response and much > improved performance near the threshold. > > * NARROW AF FILTER IMPROVEMENT: Adjusting SHIFT and > WIDTH when using very narrow DSP filters no longer causes > ‘pop’ artifacts. > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes
K3 beta-test firmware revision 4.17 (with DSP rev. 2.65) is now available. This release includes our new APF (audio peaking filter) for CW mode, which has been helping K3 field testers work "extreme" weak DX for the past several days. For voice modes, there's a "Fast Monitor" option (TX voice monitor without the processing delay). Also included is a much-improved TX Noise Gate. See detailed release notes below. Please send any questions to k3supp...@elecraft.com. For instructions on how to load beta firmware, see: http://www.elecraft.com/K3/k3_software.htm 73, Wayne N6KR * * * MCU 4.17 / DSP 2.65 / FPF 1.14, 11-2-2010 NOTE: Be sure to install all firmware files for this release, including FPF 1.14. Otherwise your menu text will be incorrect. * APF (AUDIO PEAKING FILTER) ADDED: APF provides enhanced copy of weak signals in CW mode, and is especially useful when signals are at the noise level. The K3’s APF is patterned after the most successful analog APF implementations, and is equally effective in user tests. To use APF, make sure CONFIG:DUAL PB is set to APF. (This is the default. “NOR” restores the original DUAL PB function.) Then hold DUAL PB to turn APF on/off. A special DSP graphic display is used to show that APF is in effect. At the time APF is activated, the regular I.F. SHIFT setting, if any, is “frozen,” and SHIFT then controls the center pitch of the APF filter in 10-Hz steps. APF is independent for the main and sub receivers, as well as for presets I and II. Switching between these two presets is a convenient way of turning APF on/off quickly. * ADDED VOICE TX “FAST MONITOR”: Normally the voice monitor includes a ~20-ms delay, which is necessary to hear how your on-air signal will sound (with compression, etc.). If you prefer to not hear any delay in the voice monitor, set CONFIG:TX MON to FAST. Note: You’ll still hear the delayed and processed monitor if you adjust the MIC, CMP, TX EQ or TX GATE settings while transmitting. * TX NOISE GATE IMPROVEMENT: The Noise Gate/Downward Expander for voice modes has smoother response and much improved performance near the threshold. * NARROW AF FILTER IMPROVEMENT: Adjusting SHIFT and WIDTH when using very narrow DSP filters no longer causes ‘pop’ artifacts. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
