Re: [Elecraft] K3 Macro query

[Jim Bates]

Don et al,
I'm not sure why the entire post didn't come through - (please reference
link:
http://elecraft.365791.n2.nabble.com/K3-Macro-query-td7558469.html#a7631362)

Here's the original post:

I need some help understanding SWH/SWT commands and assignments to
PF[1|2]|M[1-4]keys:

I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19
function...  Please see tests below...

Reference K3...KX2 Programmers Reference Guide G1; page 25
TAP   HOLD  nn
XMIT  TUNE  16
ATU Tune  ATU   19

Here are the macros:
MACRO1:  SWH16;
MACRO2:  SWT16;
MACRO3:  SWH19;
MACRO4:  SWT19;
MACRO5:  IS*1500;BW0280;AN1;MN023;MP002;MN255;PC100;SWT19;

When I execute from the K3 Utility Rev 1.16.7.25:
Macro Executed  K3 Response
MACRO1: Manual Tune On/Off
MACRO2: Enable Transmit On/Off
MACRO3: Turned ATU On/Off
MACRO4: Performed Auto Tune Function
MACRO5: All values/functions complete successfully

Assign to M[1-4] as TAP (All works as expected)
Macro Executed  K3 Response
MACRO1: Manual Tune On/Off
MACRO2: Enable Transmit On/Off
MACRO3: Turned ATU On/Off
MACRO4: Performed Auto Tune Function
MACRO5: All values/functions complete successfully

Assign to M[1-4] as HOLD (ERROR w/MACRO5)
Macro Executed  K3 Response
MACRO1: Manual Tune On/Off
MACRO2: Enable Transmit On/Off
MACRO3: Turned ATU On/Off
MACRO4: Performed Auto Tune Function
MACRO5: All values/functions complete successfully EXCEPT SWT19

Assign to PF[1-2] as HOLD (ERROR w/MACRO5)
Macro Executed  K3 Response
MACRO1: Manual Tune On/Off
MACRO2: Enable Transmit On/Off
MACRO3: Turned ATU On/Off
MACRO4: Performed Auto Tune Function
MACRO5: All values/functions complete successfully EXCEPT SWT19



---
Jim Bates
(804) 690-9143

On Fri, Jun 2, 2017 at 8:16 PM, Don Wilhelm  wrote:

> Jim
>
> I do not see the macros in your post, but you first have to assign the
> macros to the buttons, and then activate then by using the SWT/SWH commands
> listed in the K3 Programmers Reference.  It is a two step process.
>
> 73,
> Don W3FPR
>
> On 6/2/2017 3:16 PM, jlbates4 wrote:
>
>> I need some help understanding SWH/SWT commands and assignments to
>> PF[1|2]|M[1-4]keys:
>>
>> I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19
>> function...  Please see tests below...
>>
>>
>>
>>
>>
>> -
>> K8OI
>> mailto:jlbat...@gmail.com
>> (804) 592-1068
>> --
>> View this message in context: http://elecraft.365791.n2.nabb
>> le.com/K3-Macro-query-tp7558469p7631362.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to donw...@embarqmail.com
>>
>>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Macro query

[Don Wilhelm]

Jim

I do not see the macros in your post, but you first have to assign the 
macros to the buttons, and then activate then by using the SWT/SWH 
commands listed in the K3 Programmers Reference.  It is a two step process.


73,
Don W3FPR

On 6/2/2017 3:16 PM, jlbates4 wrote:

I need some help understanding SWH/SWT commands and assignments to
PF[1|2]|M[1-4]keys:

I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19
function...  Please see tests below...





-
K8OI
mailto:jlbat...@gmail.com
(804) 592-1068
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Macro-query-tp7558469p7631362.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Macro query

[jlbates4]

I need some help understanding SWH/SWT commands and assignments to
PF[1|2]|M[1-4]keys:

I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19
function...  Please see tests below...





-
K8OI
mailto:jlbat...@gmail.com
(804) 592-1068
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Macro-query-tp7558469p7631362.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 Macro query

[Stewart]

The following macro runs OK from the K3 Utility program,
but not when assigned to a function key - why ?

TUNEONMN019;MP001;MN255;SWH16;

73
Stewart G3RXQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Macro query

[Mike K2MK]

Hi Stewart,

Your macro works here. You probably missed one step. First I entered you
macro in the K3 Utility on the Macro tab. I pressed the Edit Macros button
and typed it into the field for Macro 8. Next I hit the button labeled
Write Macros 1-8 to K3. Then I hit Save and quit the Utility program.

After that I went to the K3 and brought up CONFIG:MACRO and hit the 8
button. The lower display then showed MACRO 8. I tapped the M4 button on
my K3 in order to save the macro to that button. The lower display then
briefly displayed M4T SET. That's it. My K3 goes into tune (and I suppose
does the other things in your macro) when I tap my M4 button.

73,
Mike K2MK


Stewart@twinwood wrote
 
 The following macro runs OK from the K3 Utility program,
 but not when assigned to a function key - why ?
 
 TUNEONMN019;MP001;MN255;SWH16;
 
 73
 Stewart G3RXQ
 


--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Macro-query-tp7558469p7558474.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Macro query

[Stewart]

Hi Mike,
I now have my macro working, but I don't know why.

The only difference is that instead of assigning to M1H SET,
I followed your example and assigned it to M1T SET.

It would appear that there is some conflict between a function key Hold
and a function that uses Hold. Assigning to Tap makes it work.

Very strange...

Thanks for your help.

73
Stewart G3RXQ
On Mon, 2 Jul 2012 07:42:03 -0700 (PDT), Mike K2MK wrote:
 Hi Stewart,

 Your macro works here. You probably missed one step. First I entered you
 macro in the K3 Utility on the Macro tab. I pressed the Edit Macros button
 and typed it into the field for Macro 8. Next I hit the button labeled
 Write Macros 1-8 to K3. Then I hit Save and quit the Utility program.

 After that I went to the K3 and brought up CONFIG:MACRO and hit the 8
 button. The lower display then showed MACRO 8. I tapped the M4 button on
 my K3 in order to save the macro to that button. The lower display then
 briefly displayed M4T SET. That's it. My K3 goes into tune (and I suppose
 does the other things in your macro) when I tap my M4 button.

 73,
 Mike K2MK


 Stewart@twinwood wrote

 The following macro runs OK from the K3 Utility program,
 but not when assigned to a function key - why ?

 TUNEONMN019;MP001;MN255;SWH16;

 73
 Stewart G3RXQ


 --
 View this message in context: 
 http://elecraft.365791.n2.nabble.com/K3-Macro-query-tp7558469p7558474.html
 Sent from the Elecraft mailing list archive at Nabble.com.
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html