[Elecraft] KDVR/DSP/Microphone Connector Issues
Good Morning, This is Mark Griffin, KB3Z. I installed a KDVR module yesterday in which my K3 recognizes that. But I cannot get any power output or ALC when I connect my microphone to the front microphone connector. According to the service people at Elecraft they tell me that the microphone connector in the front is connected to the DSP board. And you must not have one of the pin connector seated correctly. Well, I have taken the K3 apart 4 times and put it back to together again making sure that everything is seated the way it should be and it still will not work. So I connected my microphone to the rear connector and lo and behold it gives me output power and ALC. Of course you need to use the PTT to get it to work. That is the only drawback to that theory. But, I thought I would try PSK/Rtty this morning. So I started FLDigi and connects to my K3 via Digi Keyer II, but I don't see any receive audio on the waterfall display. And I also tried MMTTY and got the same exact thing for Rtty. I did switch the mode to AFSK. Would this issue that I am having also effect the receive audio for PSK31 and also Rtty? I did write an email to K3Support this morning, but I doubt I will hear anything until Tuesday. Any suggestions/help would be very much appreciated. Mark Griffin, KB3Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KDVR/DSP/Microphone Connector Issues
Did u select front / rear Mic between test ? I4UFH Inviato da iPhone > Il giorno 05/set/2015, alle ore 18:12, pastor...@verizon.net ha scritto: > > Good Morning, > This is Mark Griffin, KB3Z. I installed a KDVR module yesterday in which my > K3 recognizes that. But I cannot get any power output or ALC when I connect > my microphone to the front microphone connector. According to the service > people at Elecraft they tell me that the microphone connector in the front is > connected to the DSP board. And you must not have one of the pin connector > seated correctly. Well, I have taken the K3 apart 4 times and put it back to > together again making sure that everything is seated the way it should be and > it still will not work. So I connected my microphone to the rear connector > and lo and behold it gives me output power and ALC. Of course you need to use > the PTT to get it to work. That is the only drawback to that theory. But, > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to i4...@libero.it __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KDVR/DSP/Microphone Connector Issues
Good Morning, This is Mark Griffin, KB3Z. I installed a KDVR module yesterday in which my K3 recognizes that. But I cannot get any power output or ALC when I connect my microphone to the front microphone connector. According to the service people at Elecraft they tell me that the microphone connector in the front is connected to the DSP board. And you must not have one of the pin connector seated correctly. Well, I have taken the K3 apart 4 times and put it back to together again making sure that everything is seated the way it should be and it still will not work. So I connected my microphone to the rear connector and lo and behold it gives me output power and ALC. Of course you need to use the PTT to get it to work. That is the only drawback to that theory. But, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KDVR/DSP/Microphone Connector Issues
Would this issue that I am having also effect the receive audio for PSK31 and also Rtty? Receive audio is on a different connector than the front panel mic audio. However, if the DSP board (or front panel) was not installed correctly (misaligned/bent/broken pins on one or more connectors) it could impact Line Out audio. Connect a set of powered speakers to the Line Out jack and see if you have audio there. 73, ... Joe, W4TV On 9/5/2015 11:25 AM, pastor...@verizon.net wrote: Good Morning, This is Mark Griffin, KB3Z. I installed a KDVR module yesterday in which my K3 recognizes that. But I cannot get any power output or ALC when I connect my microphone to the front microphone connector. According to the service people at Elecraft they tell me that the microphone connector in the front is connected to the DSP board. And you must not have one of the pin connector seated correctly. Well, I have taken the K3 apart 4 times and put it back to together again making sure that everything is seated the way it should be and it still will not work. So I connected my microphone to the rear connector and lo and behold it gives me output power and ALC. Of course you need to use the PTT to get it to work. That is the only drawback to that theory. But, I thought I would try PSK/Rtty this morning. So I started FLDigi and connects to my K3 via Digi Keyer II, but I don't see any receive audio on the waterfall display. And I also tried MMTTY and got the same exact thing for Rtty. I did switch the mode to AFSK. Would this issue that I am having also effect the receive audio for PSK31 and also Rtty? I did write an email to K3Support this morning, but I doubt I will hear anything until Tuesday. Any suggestions/help would be very much appreciated. Mark Griffin, KB3Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KDVR not playing back
My KDVR doesn't play back messages that I've recorded on my microphone. When I press M1 through M4 it starts to play for a second then stops with a noise and displays END. It only does this if TX is enabled; it works fine if TX TEST is enabled. It still records receiver and plays it back OK. The KDVR used to work fine, so this is a new development. Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KDVR 3 problem
I just fired up my second K3 for the first time and the config menu says the KDVR 3 is not installed but it is definitely in there -- I put it in as I was building the radio. Rotating VFO A does nothing. Is there a common problem here? Everything else seems to be fine (so far) 73, Dave __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
To my understanding as its been explained before the KDVR records the audio to the memory before the processing but when you play it it is then injected into that same place in the chain and is thus sent through the processing. Therefore you can make changes to the processing settings and replay things and hear the difference. ~Brett (N7MG) (Previously KC7OTG) On Sun, Jun 6, 2010 at 10:04 AM, Merle Bone merleb...@charter.net wrote: I have a couple of questions about the DVR that I could not find answers to in the manual. If you are using Speech Processing does the DVR record the audio before or after the SP when you are recording from the microphone? Also, when you playback a message from the DVR, does the audio from the DVR go through the Speeech Processing if you have the SP turned On? Thanks 73, Merle - W0EWM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
In a recent message, N8XPQ mikekoe...@chartermi.net wrote ... I have competed K# build #4354 this afternoon. I have a question about the operation or capabilities of the KDVR. Is it possible to playback audio from a received station, back over the air to that station? Yes, it is, but it's bit awkward at the moment particularly if you use a speaker and do not normally monitor your outgoing speech. We are told that a forthcoming K3 software release will enable the monitor to be enabled while playing back a received station over the KDVR. 73 -- David G4DMP Leeds, England, UK -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Hi David A simple way of erasing recorded messages would be nice. Blanking the entire message bank would also help. A way of resetting the recorder to the beginning would also make life easy when playing back recordings. You always end up with mess of different recordings that requires care and guessing when you are playing them back. I marvel at how well my simple Sony DVR works, I wish it was in the K3. I could then save my recordings for future reference. John --- On Sat, 6/5/10, David Pratt da...@g4dmp.fsnet.co.uk wrote: From: David Pratt da...@g4dmp.fsnet.co.uk Subject: Re: [Elecraft] KDVR To: N8XPQ mikekoe...@chartermi.net Cc: elecraft@mailman.qth.net Date: Saturday, June 5, 2010, 11:38 PM In a recent message, N8XPQ mikekoe...@chartermi.net wrote ... I have competed K# build #4354 this afternoon. I have a question about the operation or capabilities of the KDVR. Is it possible to playback audio from a received station, back over the air to that station? Yes, it is, but it's bit awkward at the moment particularly if you use a speaker and do not normally monitor your outgoing speech. We are told that a forthcoming K3 software release will enable the monitor to be enabled while playing back a received station over the KDVR. 73 -- David G4DMP Leeds, England, UK -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Hmmm, Playing back another stations audio seems to be a common request, however, the recording when it is played back is not the true audio being transmitted by the originating station so therefore it becomes kiinda useless. Recording and playing multiple messages is possible using software such as HRD and N1MM Logger if that's any help? Yep, would be kinda nice to have a whoops key to erase individual and M1-M4 recordings. Oh well, it is still the best DVR I have had to play with... YMMV Gary On Sun, Jun 6, 2010 at 5:42 PM, juergen plebia...@yahoo.com wrote: Hi David A simple way of erasing recorded messages would be nice. Blanking the entire message bank would also help. A way of resetting the recorder to the beginning would also make life easy when playing back recordings. You always end up with mess of different recordings that requires care and guessing when you are playing them back. I marvel at how well my simple Sony DVR works, I wish it was in the K3. I could then save my recordings for future reference. John --- On Sat, 6/5/10, David Pratt da...@g4dmp.fsnet.co.uk wrote: From: David Pratt da...@g4dmp.fsnet.co.uk Subject: Re: [Elecraft] KDVR To: N8XPQ mikekoe...@chartermi.net Cc: elecraft@mailman.qth.net Date: Saturday, June 5, 2010, 11:38 PM In a recent message, N8XPQ mikekoe...@chartermi.net wrote ... I have competed K# build #4354 this afternoon. I have a question about the operation or capabilities of the KDVR. Is it possible to playback audio from a received station, back over the air to that station? Yes, it is, but it's bit awkward at the moment particularly if you use a speaker and do not normally monitor your outgoing speech. We are told that a forthcoming K3 software release will enable the monitor to be enabled while playing back a received station over the KDVR. 73 -- David G4DMP Leeds, England, UK -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Well I wouldn't say useless. I'm sure no recording is *exactly* like the original but I have often played back another station's transmission (eg to help them set up their audio to let them know how they sound over a long distance), and other people listening (eg in the same net) usually say the KDVR3 is pretty close. I believe it's certainly close enough to be of use. Another way of handling it of course is to play the KDVR recording into a PC and email it but that's slower and less immediate. Like you Gary I find the KDVR3 very good. All it needs to make it perfect in my view is the monitor tweak recently (and regularly) mentioned on the list and yes I too would support a way of erasing the AF REC loop. You can already erase M1-4 memories individually. 73 to all, Geoff G3UCK - Original Message - From: Gary Gregory garyvk...@gmail.com Sent: Sunday, June 06, 2010 3:32 PM Subject: Re: [Elecraft] KDVR Hmmm, Playing back another stations audio seems to be a common request, however, the recording when it is played back is not the true audio being transmitted by the originating station so therefore it becomes kiinda useless. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KDVR
I have a couple of questions about the DVR that I could not find answers to in the manual. If you are using Speech Processing does the DVR record the audio before or after the SP when you are recording from the microphone? Also, when you playback a message from the DVR, does the audio from the DVR go through the Speeech Processing if you have the SP turned On? Thanks 73, Merle - W0EWM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Well I wouldn't say useless. I'm sure no recording is *exactly* like the original but I have often played back another station's transmission (eg to help them set up their audio to let them know how they sound over a long distance), and other people listening (eg in the same net) usually say the KDVR3 is pretty close. I believe it's certainly close enough to be of use. Another way of handling it of course is to play the KDVR recording into a PC and email it but that's slower and less immediate. I have a problem with that idea. When I listen to the other station I hear his audio colored by everything between his mouth and my ear. That would include his mic, his audio system and transmitter, propagation effects like multipath or noise, my receiver characteristics, my speaker or headphones, and my hearing. When I record him and play it back the audio is colored by his mic, his audio system and transmitter, propagation effects like multipath or noise to me, my receiver characteristics, my recorder, my transmitter audio characteristics, propagation effects again but back to him, his entire receiver system, his speaker or headphones, and his hearing. I often shake my head in disbelief when I witness audio playbacks as a disinterested third party, because what I hear that is being recorded is rarely like what I hear being played back as an example of how the fellow sounds. It isn't what the first party sounds like, it is what the first party sounds like after being run in and out through a different receiver and different transmitter. The recorder is the least of the worries. Which leads me to a question... In the K3, is the DVR playback run out through the transmitter on a wide bandwidth and perfectly flat so the playback is at least a reproduction of what the receiver wound up creating, or is the playback run though the equalizer at the custom settings of the K3 transmitter's owner? To me, this is one of the silliest ways to adjust audio. An on-site receiver with wide bandwidth and a good set of headphones (or local recorder) is far more meaningful. One of the most annoying things to me is someone recording me and, with his S3 signal from a wet noodle antenna, saying this is how good you sound here. :-) 73 Tom __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Tom, Exactly my thoughts. I too have witnessed these types of QSO's and I came to the same conclusion that what I heard from the station playing back a recorded transmission did not sound anywhere close to what I heard live. Oh well, to each his/her own eh? But I still would like to see the Monitor mute option come to pass. 73's Gary On Mon, Jun 7, 2010 at 4:16 AM, Tom W8JI w...@w8ji.com wrote: Well I wouldn't say useless. I'm sure no recording is *exactly* like the original but I have often played back another station's transmission (eg to help them set up their audio to let them know how they sound over a long distance), and other people listening (eg in the same net) usually say the KDVR3 is pretty close. I believe it's certainly close enough to be of use. Another way of handling it of course is to play the KDVR recording into a PC and email it but that's slower and less immediate. I have a problem with that idea. When I listen to the other station I hear his audio colored by everything between his mouth and my ear. That would include his mic, his audio system and transmitter, propagation effects like multipath or noise, my receiver characteristics, my speaker or headphones, and my hearing. When I record him and play it back the audio is colored by his mic, his audio system and transmitter, propagation effects like multipath or noise to me, my receiver characteristics, my recorder, my transmitter audio characteristics, propagation effects again but back to him, his entire receiver system, his speaker or headphones, and his hearing. I often shake my head in disbelief when I witness audio playbacks as a disinterested third party, because what I hear that is being recorded is rarely like what I hear being played back as an example of how the fellow sounds. It isn't what the first party sounds like, it is what the first party sounds like after being run in and out through a different receiver and different transmitter. The recorder is the least of the worries. Which leads me to a question... In the K3, is the DVR playback run out through the transmitter on a wide bandwidth and perfectly flat so the playback is at least a reproduction of what the receiver wound up creating, or is the playback run though the equalizer at the custom settings of the K3 transmitter's owner? To me, this is one of the silliest ways to adjust audio. An on-site receiver with wide bandwidth and a good set of headphones (or local recorder) is far more meaningful. One of the most annoying things to me is someone recording me and, with his S3 signal from a wet noodle antenna, saying this is how good you sound here. :-) 73 Tom -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KDVR
I have competed K# build #4354 this afternoon. I have a question about the operation or capabilities of the KDVR. Is it possible to playback audio from a received station, back over the air to that station? -- View this message in context: http://elecraft.365791.n2.nabble.com/KDVR-tp5144572p5144572.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
The answer is YES. The first paragrasph of the KDVR3 Installation manual tells it all -The KDVR3 Digital Voice Recorder allows you to prerecord voice messages to be transmitted and to record received audio. The details are in the K3 Ownr's manual and the KDVR3 Installation instructions. 73, Don W3FPR N8XPQ wrote: I have competed K# build #4354 this afternoon. I have a question about the operation or capabilities of the KDVR. Is it possible to playback audio from a received station, back over the air to that station? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
I figured it out. Wow what a neat toy! Thanks for the help, Mike N8XPQ -- View this message in context: http://elecraft.365791.n2.nabble.com/KDVR-tp5144572p5144608.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
In a recent message, Gary Gregory garyvk...@gmail.com wrote ... ... Elecraft feel that it is worth doing a change so that Monitor can be selected to be ON whilst TX from the DVR and OFF when in Normal TX, then I would use that setup rather than the current way it works. Good, I can't disagree with that ;-) 73 -- David G4DMP Leeds, England, UK -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
While I can understand why one might think that it would be a benefit to turn off the monitor and just have silence in your ears briefly, I think that once one spends too many weekends with headphones on for greater than half of the 48 hours of a contest over decades, you will begin to understand that having the SSB monitor on - all the time - is an important thing. If your ears need a break, pull the headphones off during a DVR transmission and really give your ears and head a break. It is important because it allows you to hear what you are saying clearly to maintain articulation and also enables you to maintain a level output of your voice - mainly so you don't start yelling into the mic and then suffer distortion and the resultant loss of your voice later on - yes, even when using the DVR. If you must, turn it down to a lower level, but don't turn it off - please! 73, Bob W5OV -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Gregory Sent: Tuesday, June 01, 2010 8:28 PM To: Geoffrey Downs Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR Geoff, I didn't know this was on the list but I sure reckon you got a great idea if it is not already on the list. I use MON at level 6 when using the DVR and I have been trying to get used to hearing my own voice in the headphones. I can do it this way but it sure would be a lot better if it was muted during TX. I will be watching closely for any response from Elecraft. 73's Gary On Wed, Jun 2, 2010 at 6:42 AM, Geoffrey Downs geoff...@downs.globalnet.co.uk wrote: While on the subject of the KDVR3, I wonder if the next beta firmware release will include a feature that automatically turns MON on at a predetermined level when a recording is being transmitted, and off again when transmission is finished? It has reputedly been on the list for a year or so. 73 to all Geoff G3UCK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
It never ceases to amaze me when a suggestion comes up to add a feature that has some practical use, we get a variety of opinions to the contrary and yet I think we all forget that nearly all added features come with the choice of on/off so that those of us wanting a feature added can use it and those that don't want it can turn it off and maintain the status quo. Hi, I for one have not been vocal against any improvement with the K3 when the suggested feature is of no use to me and so I would ask that we all support the ongoing feature enhancement of the K3 by supporting the adding of new features such as Monitor On/Mute for the DVR during playback. I have never caught myself yelling into a microphone because I couldn't hear myself speak and I have used the DVR on playback during a contest with the Monitor turned off. I would prefer to keep it on and muted on TX as MY preferred way of operating. I don't use external boxes either such as microHAM or any other type of interface and not all operators wish to use N1MM Logger or even HRD for that matter. I don't even want a PC connected to the K3 on most occasions and therefore I would not use a PC based DVR. Many K3 owners are casual operators most of the time so many of the contest features are of little use. This does not mean we don't want the features, just a choice as to when we use them and surely this is not too much to ask. I respect all opinions on the refelctor as we all have different ideas about operating and the K3 is by far the most versatile radio I have owned and I have seen it grow in versatility since I aquired mine over two years ago. If your listening Wayne, this is a good feature for many of us and we would welcome it becoming a reality as we are customers too. sincerely, Gary VK4FD On Wed, Jun 2, 2010 at 8:41 PM, Bob Naumann w...@w5ov.com wrote: While I can understand why one might think that it would be a benefit to turn off the monitor and just have silence in your ears briefly, I think that once one spends too many weekends with headphones on for greater than half of the 48 hours of a contest over decades, you will begin to understand that having the SSB monitor on - all the time - is an important thing. If your ears need a break, pull the headphones off during a DVR transmission and really give your ears and head a break. It is important because it allows you to hear what you are saying clearly to maintain articulation and also enables you to maintain a level output of your voice - mainly so you don't start yelling into the mic and then suffer distortion and the resultant loss of your voice later on - yes, even when using the DVR. If you must, turn it down to a lower level, but don't turn it off - please! 73, Bob W5OV -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Gregory Sent: Tuesday, June 01, 2010 8:28 PM To: Geoffrey Downs Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR Geoff, I didn't know this was on the list but I sure reckon you got a great idea if it is not already on the list. I use MON at level 6 when using the DVR and I have been trying to get used to hearing my own voice in the headphones. I can do it this way but it sure would be a lot better if it was muted during TX. I will be watching closely for any response from Elecraft. 73's Gary On Wed, Jun 2, 2010 at 6:42 AM, Geoffrey Downs geoff...@downs.globalnet.co.uk wrote: While on the subject of the KDVR3, I wonder if the next beta firmware release will include a feature that automatically turns MON on at a predetermined level when a recording is being transmitted, and off again when transmission is finished? It has reputedly been on the list for a year or so. 73 to all Geoff G3UCK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please
Re: [Elecraft] KDVR
Gary, I did not suggest that the feature should not be added to the K3 nor did I suggest that improvements not be made to the K3. Why do you claim that I did? My point is that in nearly 40 years of SSB contesting, it has become apparent to me that those who use a monitor function to keep track of what they're doing vocally on their air - whether by automated sending or with their own voice A: sound better, and B: maintain coherence better. 73, Bob W5OV -Original Message- From: Gary Gregory [mailto:garyvk...@gmail.com] Sent: Wednesday, June 02, 2010 6:03 AM To: Bob Naumann Cc: Geoffrey Downs; Elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR It never ceases to amaze me when a suggestion comes up to add a feature that has some practical use, we get a variety of opinions to the contrary and yet I think we all forget that nearly all added features come with the choice of on/off so that those of us wanting a feature added can use it and those that don't want it can turn it off and maintain the status quo. Hi, I for one have not been vocal against any improvement with the K3 when the suggested feature is of no use to me and so I would ask that we all support the ongoing feature enhancement of the K3 by supporting the adding of new features such as Monitor On/Mute for the DVR during playback. I have never caught myself yelling into a microphone because I couldn't hear myself speak and I have used the DVR on playback during a contest with the Monitor turned off. I would prefer to keep it on and muted on TX as MY preferred way of operating. I don't use external boxes either such as microHAM or any other type of interface and not all operators wish to use N1MM Logger or even HRD for that matter. I don't even want a PC connected to the K3 on most occasions and therefore I would not use a PC based DVR. Many K3 owners are casual operators most of the time so many of the contest features are of little use. This does not mean we don't want the features, just a choice as to when we use them and surely this is not too much to ask. I respect all opinions on the refelctor as we all have different ideas about operating and the K3 is by far the most versatile radio I have owned and I have seen it grow in versatility since I aquired mine over two years ago. If your listening Wayne, this is a good feature for many of us and we would welcome it becoming a reality as we are customers too. sincerely, Gary VK4FD On Wed, Jun 2, 2010 at 8:41 PM, Bob Naumann w...@w5ov.com wrote: While I can understand why one might think that it would be a benefit to turn off the monitor and just have silence in your ears briefly, I think that once one spends too many weekends with headphones on for greater than half of the 48 hours of a contest over decades, you will begin to understand that having the SSB monitor on - all the time - is an important thing. If your ears need a break, pull the headphones off during a DVR transmission and really give your ears and head a break. It is important because it allows you to hear what you are saying clearly to maintain articulation and also enables you to maintain a level output of your voice - mainly so you don't start yelling into the mic and then suffer distortion and the resultant loss of your voice later on - yes, even when using the DVR. If you must, turn it down to a lower level, but don't turn it off - please! 73, Bob W5OV -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Gregory Sent: Tuesday, June 01, 2010 8:28 PM To: Geoffrey Downs Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR Geoff, I didn't know this was on the list but I sure reckon you got a great idea if it is not already on the list. I use MON at level 6 when using the DVR and I have been trying to get used to hearing my own voice in the headphones. I can do it this way but it sure would be a lot better if it was muted during TX. I will be watching closely for any response from Elecraft. 73's Gary On Wed, Jun 2, 2010 at 6:42 AM, Geoffrey Downs geoff...@downs.globalnet.co.uk wrote: While on the subject of the KDVR3, I wonder if the next beta firmware release will include a feature that automatically turns MON on at a predetermined level when a recording is being transmitted, and off again when transmission is finished? It has reputedly been on the list for a year or so. 73 to all Geoff G3UCK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard
Re: [Elecraft] KDVR
I like to have the monitor on very low during its use as at times I have found that: 1) The wrong button was pressed 2) With the OII on rare occasion a poor quality transmission was in progress which I could terminate and restart overcoming the problem. Problems can also occur with the K3. 73 Doug EI2CN -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob Naumann Sent: 02 June 2010 11:41 To: 'Gary Gregory'; 'Geoffrey Downs' Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR While I can understand why one might think that it would be a benefit to turn off the monitor and just have silence in your ears briefly, I think that once one spends too many weekends with headphones on for greater than half of the 48 hours of a contest over decades, you will begin to understand that having the SSB monitor on - all the time - is an important thing. If your ears need a break, pull the headphones off during a DVR transmission and really give your ears and head a break. It is important because it allows you to hear what you are saying clearly to maintain articulation and also enables you to maintain a level output of your voice - mainly so you don't start yelling into the mic and then suffer distortion and the resultant loss of your voice later on - yes, even when using the DVR. If you must, turn it down to a lower level, but don't turn it off - please! 73, Bob W5OV -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Gregory Sent: Tuesday, June 01, 2010 8:28 PM To: Geoffrey Downs Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR Geoff, I didn't know this was on the list but I sure reckon you got a great idea if it is not already on the list. I use MON at level 6 when using the DVR and I have been trying to get used to hearing my own voice in the headphones. I can do it this way but it sure would be a lot better if it was muted during TX. I will be watching closely for any response from Elecraft. 73's Gary On Wed, Jun 2, 2010 at 6:42 AM, Geoffrey Downs geoff...@downs.globalnet.co.uk wrote: While on the subject of the KDVR3, I wonder if the next beta firmware release will include a feature that automatically turns MON on at a predetermined level when a recording is being transmitted, and off again when transmission is finished? It has reputedly been on the list for a year or so. 73 to all Geoff G3UCK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
On 6/2/2010 4:02 AM, Gary Gregory wrote: It never ceases to amaze me when a suggestion comes up to add a feature that has some practical use, we get a variety of opinions to the contrary and yet I think we all forget that nearly all added features come with the choice of on/off so that those of us wanting a feature added can use it and those that don't want it can turn it off and maintain the status quo. As a software developer myself, here are some reasons that I disagree: 1. Every feature requires code space, which is in short supply. 2. The menu interface is already complicated and adding more switches makes it worse. I've talked to new K3 users who are overwhelmed. 3. If a feature is implemented at all, it must be implemented cleanly, in a way which fits the general user-interface and operational philosophy of the device. It can't have hidden 'gotchas', etc. It isn't a good argument for doing something fundamentally inconsistent to say that you can always turn it off. 4. Once a feature exists, it has to be supported. Some 'features' and implementations thereof can have a large impact on the volume of support calls. 5. Programmer time is very expensive and limited. Just because something has 'practical use' to the four operators out of 10,000 who want a particular feature does not mean that the two guys who have to make this work should spend their time on it, especially when there are things that 1,000 operators could use. These are just some of the reasons that because it's possible may not be a good reason to do something! -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
I think we all need to remember that features are approved and added by Elecraft, not by users. However, I bet a lot of the features that we like in the K3 come from user suggestions or from similar sources (dialog on other forums?). I think that the freedom to suggest a new feature should be paramount on this forum. Of course, so should the freedom to vote No on a new idea. This is all information that be used by Wayne and Eric in choosing things that might be included someday. 73, phil, K7PEH P.S. A programmer for 45 years On Jun 2, 2010, at 7:55 AM, Vic K2VCO wrote: On 6/2/2010 4:02 AM, Gary Gregory wrote: It never ceases to amaze me when a suggestion comes up to add a feature that has some practical use, we get a variety of opinions to the contrary and yet I think we all forget that nearly all added features come with the choice of on/off so that those of us wanting a feature added can use it and those that don't want it can turn it off and maintain the status quo. As a software developer myself, here are some reasons that I disagree: 1. Every feature requires code space, which is in short supply. 2. The menu interface is already complicated and adding more switches makes it worse. I've talked to new K3 users who are overwhelmed. 3. If a feature is implemented at all, it must be implemented cleanly, in a way which fits the general user-interface and operational philosophy of the device. It can't have hidden 'gotchas', etc. It isn't a good argument for doing something fundamentally inconsistent to say that you can always turn it off. 4. Once a feature exists, it has to be supported. Some 'features' and implementations thereof can have a large impact on the volume of support calls. 5. Programmer time is very expensive and limited. Just because something has 'practical use' to the four operators out of 10,000 who want a particular feature does not mean that the two guys who have to make this work should spend their time on it, especially when there are things that 1,000 operators could use. These are just some of the reasons that because it's possible may not be a good reason to do something! -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Absolutely. We always are listening. :-) 73, Eric WA6HHQ On 6/2/2010 8:09 AM, Phil Hystad wrote: I think we all need to remember that features are approved and added by Elecraft, not by users. However, I bet a lot of the features that we like in the K3 come from user suggestions or from similar sources (dialog on other forums?). I think that the freedom to suggest a new feature should be paramount on this forum. Of course, so should the freedom to vote No on a new idea. This is all information that be used by Wayne and Eric in choosing things that might be included someday. 73, phil, K7PEH P.S. A programmer for 45 years __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Aaaah Bob, I was not singling you out and I do apologise if you felt that I was. My remarks were meant only as a General Comment and perhaps were not articulated well. Regardless, I understand that compromises need to be made regarding FW storage etc and so I leave that to the engineers at Elecraft. My preference with the Monitor function remain, whilst it works fine as it is, IF Elecraft feel that it is worth doing a change so that Monitor can be selected to be ON whilst TX from the DVR and OFF when in Normal TX, then I would use that setup rather than the current way it works. As many have previously stated, K3 users are now numbering well ove 4,000 world wide and the number is still rising rapidly so there will be more and more wish list items to surface in the future and again, this is not a bad thing. Wayne and Eric are listening and will always decide what is best for their products but debate is good and I certainly look forward to the future enhancements as they become available, some I will use, many perhaps I will not such as QRQ @ 75wpm...(Grin)...the mind is willing but I would need some serious surgery on the Grey Matter to decode it(:-)) I hope the choice of Monitor ON/OFF on the DVR playback comes to pass..YMMV My 2c...keep the change! Gary On Thu, Jun 3, 2010 at 2:16 AM, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com wrote: Absolutely. We always are listening. :-) 73, Eric WA6HHQ On 6/2/2010 8:09 AM, Phil Hystad wrote: I think we all need to remember that features are approved and added by Elecraft, not by users. However, I bet a lot of the features that we like in the K3 come from user suggestions or from similar sources (dialog on other forums?). I think that the freedom to suggest a new feature should be paramount on this forum. Of course, so should the freedom to vote No on a new idea. This is all information that be used by Wayne and Eric in choosing things that might be included someday. 73, phil, K7PEH P.S. A programmer for 45 years __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KDVR
Here's a posting from March on using the KDVR with N1MM. I've used the macros in DXLab Commander successfully using the suggested syntax. Jim N7US -Original Message- From: n1mmlog...@yahoogroups.com [mailto:n1mmlog...@yahoogroups.com] On Behalf Of Iain MacDonnell - N6ML Sent: March 07, 2010 21:09 To: n1mmlog...@yahoogroups.com Subject: Re: [N1MM] N1MM and K-3 Configuration for keying KDVR3 with F key strings I used CATA1ASC and CATA2ASC for a possible SO2R solution that I've never really tested fully. CATA1ASC should have the same effect as CAT1ASC in a SO1V-type scenario. Some notes at http://www.dseven.org/ar/n1mm-kdvr3 ~Iain / N6ML On Sun, Mar 7, 2010 at 11:28 AM, Steve London n...@arrl.net wrote: The correct command is CAT1ASC, not CATA1ASC . 73, Steve, N2IC Jim McCook wrote: Last year N6ML came up with a great scheme for using 4 function keys on the keyboard with N1MM to key the K-3's KDVR3 on SSB. I used it afterward in the CQWW SSB contest, and it worked flawlessly. Now, for some reason, it won't work in this ARRL SSB DX contest. The entry in N1MM for those keys had been memorized in N1MM for SSB: *F1 CQ,{CATA1ASC K31;SWT21;} *F2 Exch,{CATA1ASC K31;SWT31;} *F3 Thanks!,{CATA1ASC K31;SWT35;} *F4 {MYCALL},{CATA1ASC K31;SWT39;} I can't understand why they won't work now, when they did before. I can punch the M1-M4 buttons on the K-3 and they work fine. I've tried all the settings I can imagine in both N1MM and PTT-key in the K-3. If you are using this scheme, please tell me your magic combination of settings in N1MM and K-3 Config PTT-KEY Jim W6YA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
While on the subject of the KDVR3, I wonder if the next beta firmware release will include a feature that automatically turns MON on at a predetermined level when a recording is being transmitted, and off again when transmission is finished? It has reputedly been on the list for a year or so. 73 to all Geoff G3UCK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
Geoff, I didn't know this was on the list but I sure reckon you got a great idea if it is not already on the list. I use MON at level 6 when using the DVR and I have been trying to get used to hearing my own voice in the headphones. I can do it this way but it sure would be a lot better if it was muted during TX. I will be watching closely for any response from Elecraft. 73's Gary On Wed, Jun 2, 2010 at 6:42 AM, Geoffrey Downs geoff...@downs.globalnet.co.uk wrote: While on the subject of the KDVR3, I wonder if the next beta firmware release will include a feature that automatically turns MON on at a predetermined level when a recording is being transmitted, and off again when transmission is finished? It has reputedly been on the list for a year or so. 73 to all Geoff G3UCK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR
After reading this thread throughout the day, I was inspired to setup N1MM to use the DVR in the K3. By following the simple steps outlined in the page link below by N6ML, it took only a few minutes to add the macros within N1MM and make the recordings in the K3. Works great! Can't wait to try it in a phone contest. Dave, N4QS - Original Message - From: Jim McDonald j...@n7us.net To: Elecraft@mailman.qth.net Sent: Tuesday, June 01, 2010 2:59 PM Subject: [Elecraft] KDVR Here's a posting from March on using the KDVR with N1MM. I've used the macros in DXLab Commander successfully using the suggested syntax. Jim N7US -Original Message- From: n1mmlog...@yahoogroups.com [mailto:n1mmlog...@yahoogroups.com] On Behalf Of Iain MacDonnell - N6ML Sent: March 07, 2010 21:09 To: n1mmlog...@yahoogroups.com Subject: Re: [N1MM] N1MM and K-3 Configuration for keying KDVR3 with F key strings I used CATA1ASC and CATA2ASC for a possible SO2R solution that I've never really tested fully. CATA1ASC should have the same effect as CAT1ASC in a SO1V-type scenario. Some notes at http://www.dseven.org/ar/n1mm-kdvr3 ~Iain / N6ML On Sun, Mar 7, 2010 at 11:28 AM, Steve London n...@arrl.net wrote: The correct command is CAT1ASC, not CATA1ASC . 73, Steve, N2IC Jim McCook wrote: Last year N6ML came up with a great scheme for using 4 function keys on the keyboard with N1MM to key the K-3's KDVR3 on SSB. I used it afterward in the CQWW SSB contest, and it worked flawlessly. Now, for some reason, it won't work in this ARRL SSB DX contest. The entry in N1MM for those keys had been memorized in N1MM for SSB: *F1 CQ,{CATA1ASC K31;SWT21;} *F2 Exch,{CATA1ASC K31;SWT31;} *F3 Thanks!,{CATA1ASC K31;SWT35;} *F4 {MYCALL},{CATA1ASC K31;SWT39;} I can't understand why they won't work now, when they did before. I can punch the M1-M4 buttons on the K-3 and they work fine. I've tried all the settings I can imagine in both N1MM and PTT-key in the K-3. If you are using this scheme, please tell me your magic combination of settings in N1MM and K-3 Config PTT-KEY Jim W6YA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KDVR issue?
Elecrafters, can anyone double this: If you Replay a message, say M1, tapping the button *twice*, these things happen, depending on how long you waited for the second tap: Tap twice fast (1/2 second pause): Message stops, then plays again. Tap twice with long pause: Messages fully plays, but RX-Audio won't come on for about 1/2 second after message has finished. Let the message play nearly to its end, then tap: RX-Audio won't come on for even longer (felt like this). Martin -- 73, DM4iM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KDVR issue?
On Wed, Oct 28, 2009 at 9:34 AM, DM4iM hamra...@vr-web.de wrote: Elecrafters, can anyone double this: If you Replay a message, say M1, tapping the button *twice*, these things happen, depending on how long you waited for the second tap: Tap twice fast (1/2 second pause): Message stops, then plays again. I can not reproduce that. Tap twice with long pause: Messages fully plays, but RX-Audio won't come on for about 1/2 second after message has finished. Let the message play nearly to its end, then tap: RX-Audio won't come on for even longer (felt like this). I can reproduce that - it appears that PTT is being asserted for the duration of the message, starting when you last pressed the button, but the audio is not being reproduced. ~Iain / N6ML __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html