Re: [Elecraft] KX3-k, S/N 2917!
Hi Jim, I have not seen any reportings of this kind but mind you it's a real computer:-) Like computers you sometimes need to reboot. I see now that you use the correct return address in your mail, it arrived ok with me albeit the stars are still there due to your use of markup in the mails. The reflector strips them as I said previously. Oh and it's voilĂ ...;-) French for: Here you are. 72/73 Peter Op 2013-04-26 19:04 schreef Jim Harris: *Now here is another mysterious twist! I had resigned myself I was going to have to box up my KX3 to send off for repair. But then I thought I would give a try to that wonderful RESTORE option in the Utility before I resorted to such a drastic move. (I had restored my K3 to operation in the past with this option/procedure with another Beta version of the K3 Firmware: I didn't report this malfunction and I should have!) I went through the operation of a RESTORE of my saved configuration (v1.44 Beta) and jwalah (? - spelling but you get the point), my KX3 came back to life.* *Is this a flaw in Beta v1.44 Version of the Firmware?* *Best 72 73.* *Jim..* *WA4NTM* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3-k, S/N 2917!
There have been some reports of lost audio with beta 1.44 -- here is a summary from Wayne: KX3 beta (1.44) update: possible problem with DUAL RX in combination with NR and/or Autonotch With the combination of DUAL RX and NR or Autonotch, you may have loss of audio, see DSPT (DSP timeout) or ERR DSX (DSP communications error). Turning the radio off/on will clear any of these conditions. This can happen when turning the controls on or off, or on exit from an ATU tune, etc. We're looking into this. Until we release new firmware, please avoid using these features in combination. 73, Matt VK2RQ. On 29/04/2013, at 6:25 AM, Peter Eijlander (PA0PJE) pa0...@xs4all.nl wrote: Hi Jim, I have not seen any reportings of this kind but mind you it's a real computer:-) Like computers you sometimes need to reboot. I see now that you use the correct return address in your mail, it arrived ok with me albeit the stars are still there due to your use of markup in the mails. The reflector strips them as I said previously. Oh and it's voilĂ ...;-) French for: Here you are. 72/73 Peter Op 2013-04-26 19:04 schreef Jim Harris: *Now here is another mysterious twist! I had resigned myself I was going to have to box up my KX3 to send off for repair. But then I thought I would give a try to that wonderful RESTORE option in the Utility before I resorted to such a drastic move. (I had restored my K3 to operation in the past with this option/procedure with another Beta version of the K3 Firmware: I didn't report this malfunction and I should have!) I went through the operation of a RESTORE of my saved configuration (v1.44 Beta) and jwalah (? - spelling but you get the point), my KX3 came back to life.* *Is this a flaw in Beta v1.44 Version of the Firmware?* *Best 72 73.* *Jim..* *WA4NTM* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KX3-k, S/N 2917!
*Good morning, Folks.* ** *I had a mystery with my KX3 this morning!* *I woke up this morning to a DEAD receiver in my KX3 on 40m. (Last night when I was using it, it was fully operational!) I then checked all of the switches connections and they seem to be correct and tight. **I then tried my K2 and there was static on 40m as is normal around here. * ** *Yesterday I had installed Beta Firmware v1.44 beta and luckily [or unluckily, whichever way you want to look at it] SAVED my configuration. At one time the latest KX3 Utility (1.12.8.11 for Windows) even indicated that it didn't look as if I had a KX3 attached: which I definitely did. [It's ALWAYS connected to my computer via an Elecraft USB Cable.]* *Now here is another mysterious twist! I had resigned myself I was going to have to box up my KX3 to send off for repair. But then I thought I would give a try to that wonderful RESTORE option in the Utility before I resorted to such a drastic move. (I had restored my K3 to operation in the past with this option/procedure with another Beta version of the K3 Firmware: I didn't report this malfunction and I should have!) I went through the operation of a RESTORE of my saved configuration (v1.44 Beta) and jwalah (? - spelling but you get the point), my KX3 came back to life.* *Is this a flaw in Beta v1.44 Version of the Firmware?* *Best 72 73.* *Jim..* *WA4NTM* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html