[Elecraft] PR6 6-meter pre-amp
In like new condition. Non-smoker. $75 shipped ground lower 48. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] PR6 6-Meter Pre-amp Manual error.
Head's up on the PR6 6-Meter Manual. On page 3 of the manual it states that the white control wire from the PR6Pre-amp should go to Pin 6 of the ACC connector. However, the drawing actually shows that wire going to Pin 11, which is highlighted. I ordered one anyway! Terry, W0FM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PR6 6-Meter Pre-amp Manual error.
The manual I uploaded last night was an early revision. The Rev A PR6 manual is now on the web site. If it has the same error, we'll correct it immediately (and well before they ship ;-) See: http://www.elecraft.com/manual/PR6%20Owners%20Manual%20Rev%20A.pdf 73, Eric WA6HHQ Terry Schieler wrote: Head's up on the PR6 6-Meter Manual. On page 3 of the manual it states that the white control wire from the PR6Pre-amp should go to Pin 6 of the ACC connector. However, the drawing actually shows that wire going to Pin 11, which is highlighted. I ordered one anyway! Terry, W0FM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] PR6 6-Meter Pre-amp Manual error.
A-yup! The correct pin is 6. A corrected manual will be on the web site soon. The PR6 comes with a pre-assembled cable to connect it to the power and ACC output on the K3. The connection pin was shown for those who will want to remove the connector and add the control wire to an existing connector, such as the connector from an XV transverter. Ron (red faced again) AC7AC -Original Message- Head's up on the PR6 6-Meter Manual. On page 3 of the manual it states that the white control wire from the PR6Pre-amp should go to Pin 6 of the ACC connector. However, the drawing actually shows that wire going to Pin 11, which is highlighted. I ordered one anyway! Terry, W0FM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PR6 6-Meter Pre-amp Manual error.
I thought that the correct pin was 11. Bob On Thu, Oct 23, 2008 at 10:17 AM, Ron D'Eau Claire [EMAIL PROTECTED] wrote: A-yup! The correct pin is 6. A corrected manual will be on the web site soon. The PR6 comes with a pre-assembled cable to connect it to the power and ACC output on the K3. The connection pin was shown for those who will want to remove the connector and add the control wire to an existing connector, such as the connector from an XV transverter. Ron (red faced again) AC7AC -Original Message- Head's up on the PR6 6-Meter Manual. On page 3 of the manual it states that the white control wire from the PR6Pre-amp should go to Pin 6 of the ACC connector. However, the drawing actually shows that wire going to Pin 11, which is highlighted. I ordered one anyway! Terry, W0FM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] PR6 6-Meter Pre-amp Manual error.
Yes, and that's how the manual now reads. There's an old saying out here in the west, He who shoots quickly from the hip will shoot himself in the foot. Some days I'm an expert at that. The correct pin is the DIGOUT1 signal at pin 11 as shown in the illustration. The text was wrong. The manual has been corrected and it will be on the web site shortly. The manuals shipped with the product are all correct. Ron AC7AC -Original Message- I thought that the correct pin was 11. Bob ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
