[Elecraft] Trying to gauge interest

2016-07-12 Thread Ken Arck

Hello fellow K3 owners!

I still have some boards available if anyone is interested and I'm 
happy to report they work just fine with the KPA3 installed as well!


As my main use for my K3s is 6 meter and 144 EME operation, I bought 
the 10 watt version without the antenna tuner. I dabble a little on 
HF but not a whole lot. As such, the 10 watt, no tuner version suits 
my needs, although I thought it would be nice to be able to select 2 
different antennas from the front panel (one for HF and the other for 
6 meters). Spending several hundred dollars for the KATU seemed a bit 
overkill to me just to get front panel selection of 2 antennas.


So looking at the schematic, I saw how easy it would be to modify my 
KANT board to allow 2 antenna selection. I bread boarded up my 
schematic and It works exactly as I expected.


So I'm debating having some pc boards made to replace the entire KANT 
board but only if there is enough interest to justify doing so and I 
wanted to see how y'all felt about it. The bare boards run $25. You 
would take the parts from your existing KANT and reuse them on this 
new board, in addition to adding around $12 worth of new parts. So 
for under $40, you could have dual antenna selection on your non-KATU 
equipped K3.


Please email me offlist if you're interested

Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Trying to gauge interest

2016-06-19 Thread Gary
I have wondered often why Elecraft have not done so but maybe antenna swtches 
are common enough they didn't see a need?
Gar

-Original Message-
From: "Lewis Phelps" <l...@n6lew.us>
Sent: ‎20/‎06/‎2016 3:00 AM
To: "Ken Arck" <k...@arcomcontrollers.com>
Cc: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] Trying to gauge interest

Count me in!!!

Lew N6LEW

> On Jun 19, 2016, at 11:56 AM, Ken Arck <k...@arcomcontrollers.com> wrote:
> 
> Hello fellow 10 watt K3 owners!
> 
> As my main use for my K3s is 6 meter and 144 EME operation, I bought the 10 
> watt version without the antenna tuner. I dabble a little on HF but not a 
> whole lot. As such, the 10 watt, no tuner version suits my needs, although I 
> thought it would be nice to be able to select 2 different antennas from the 
> front panel (one for HF and the other for 6 meters). Spending several hundred 
> dollars for the KATU seemed a bit overkill to me just to get front panel 
> selection of 2 antennas.
> 
> So looking at the schematic, I saw how easy it would be to modify my KANT 
> board to allow 2 antenna selection. I bread boarded up my schematic and It 
> works exactly as I expected.
> 
> So I'm debating having some pc boards made to replace the entire KANT board 
> but only if there is enough interest to justify doing so and I wanted to see 
> how y'all felt about it. I project the bare boards would run around $20 to 
> $25. You would take the parts from your existing KANT and reuse them on this 
> new board, in addition to adding around $12 worth of new parts. So for under 
> $40, you could have dual antenna selection on your non-KATU equipped K3.
> 
> Any interest?
> 
> Ken
> --
> President and CTO - Arcom Communications
> Makers of repeater controllers and accessories.
> http://www.arcomcontrollers.com/
> Authorized Dealers for Kenwood and Telewave and
> we offer complete repeater packages!
> AH6LE/R - IRLP Node 3000
> http://www.irlp.net
> "We don't just make 'em. We use 'em!"
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to l...@n6lew.us
> 

Lew Phelps N6LEW
Pasadena, CA DM04wd
Elecraft K3-10 / KXV144 / XV432
Yaesu FT-7800 
l...@n6lew.us
www.n6lew.us

Generalized Law of Entropy: Sooner or later, everything that has been put 
together will fall apart.





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vk1zzg...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Trying to gauge interest

2016-06-19 Thread Ken Arck
If you look at the schematics of the KATU, you'll see the chain of 
shift registers on the KATU actually sends a signal back to the RF 
board. So the CPU sends the command to the KATU and if the ATU 
doesn't respond (via the MISO3 line), the CPU interprets that to mean 
the KATU isn't present


As for handling 100 watts, I don't see a problem as I use the exact 
same OMRON relay the KATU does and I considered inductance in the pc layout


Ken




At 11:34 AM 6/19/2016, ab2tc wrote:

Hi,

Is there any reason why this should not work with a K3/100 also? BTW, how do
you convince the firmware that an ATU is installed? When I press "ANT" on my
ATU-less K3/100 I get the message "NO ATU". If both these concerns can be
put away, count me in, too. I have always been bummed that I can't get two
antennas without installing the ATU which I do not want to do. I consider an
ATU to be part of the antenna system and should be installed as close to the
antenna as possible (my KAT 500 is at the far end of a 100' coax run).

AB2TC - Knut

PS. If this is a double posting, I apologize. I *hate* hot keys.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3S-losing-swr-wattmeters-indications-on-tx-please-help-tp7618984p7618999.html

Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@arcomcontrollers.com


--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Trying to gauge interest

2016-06-19 Thread Wes Stewart
Looks like you can tell the K3(S) that the ATU is installed and the ANT1/ANT2 
option is enabled:-)


I might be interested too.

On 6/19/2016 11:34 AM, ab2tc wrote:

Hi,

Is there any reason why this should not work with a K3/100 also? BTW, how do
you convince the firmware that an ATU is installed? When I press "ANT" on my
ATU-less K3/100 I get the message "NO ATU". If both these concerns can be
put away, count me in, too. I have always been bummed that I can't get two
antennas without installing the ATU which I do not want to do. I consider an
ATU to be part of the antenna system and should be installed as close to the
antenna as possible (my KAT 500 is at the far end of a 100' coax run).

AB2TC - Knut

PS. If this is a double posting, I apologize. I *hate* hot keys.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3S-losing-swr-wattmeters-indications-on-tx-please-help-tp7618984p7618999.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wes_n...@triconet.org



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Trying to gauge interest

2016-06-19 Thread ab2tc
Hi,

Is there any reason why this should not work with a K3/100 also? BTW, how do
you convince the firmware that an ATU is installed? When I press "ANT" on my
ATU-less K3/100 I get the message "NO ATU". If both these concerns can be
put away, count me in, too. I have always been bummed that I can't get two
antennas without installing the ATU which I do not want to do. I consider an
ATU to be part of the antenna system and should be installed as close to the
antenna as possible (my KAT 500 is at the far end of a 100' coax run).

AB2TC - Knut

PS. If this is a double posting, I apologize. I *hate* hot keys.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3S-losing-swr-wattmeters-indications-on-tx-please-help-tp7618984p7618999.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Trying to gauge interest

2016-06-19 Thread Lewis Phelps
Count me in!!!

Lew N6LEW

> On Jun 19, 2016, at 11:56 AM, Ken Arck  wrote:
> 
> Hello fellow 10 watt K3 owners!
> 
> As my main use for my K3s is 6 meter and 144 EME operation, I bought the 10 
> watt version without the antenna tuner. I dabble a little on HF but not a 
> whole lot. As such, the 10 watt, no tuner version suits my needs, although I 
> thought it would be nice to be able to select 2 different antennas from the 
> front panel (one for HF and the other for 6 meters). Spending several hundred 
> dollars for the KATU seemed a bit overkill to me just to get front panel 
> selection of 2 antennas.
> 
> So looking at the schematic, I saw how easy it would be to modify my KANT 
> board to allow 2 antenna selection. I bread boarded up my schematic and It 
> works exactly as I expected.
> 
> So I'm debating having some pc boards made to replace the entire KANT board 
> but only if there is enough interest to justify doing so and I wanted to see 
> how y'all felt about it. I project the bare boards would run around $20 to 
> $25. You would take the parts from your existing KANT and reuse them on this 
> new board, in addition to adding around $12 worth of new parts. So for under 
> $40, you could have dual antenna selection on your non-KATU equipped K3.
> 
> Any interest?
> 
> Ken
> --
> President and CTO - Arcom Communications
> Makers of repeater controllers and accessories.
> http://www.arcomcontrollers.com/
> Authorized Dealers for Kenwood and Telewave and
> we offer complete repeater packages!
> AH6LE/R - IRLP Node 3000
> http://www.irlp.net
> "We don't just make 'em. We use 'em!"
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to l...@n6lew.us
> 

Lew Phelps N6LEW
Pasadena, CA DM04wd
Elecraft K3-10 / KXV144 / XV432
Yaesu FT-7800 
l...@n6lew.us
www.n6lew.us

Generalized Law of Entropy: Sooner or later, everything that has been put 
together will fall apart.





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Trying to gauge interest

2016-06-19 Thread Ken Arck

Hello fellow 10 watt K3 owners!

As my main use for my K3s is 6 meter and 144 EME operation, I bought 
the 10 watt version without the antenna tuner. I dabble a little on 
HF but not a whole lot. As such, the 10 watt, no tuner version suits 
my needs, although I thought it would be nice to be able to select 2 
different antennas from the front panel (one for HF and the other for 
6 meters). Spending several hundred dollars for the KATU seemed a bit 
overkill to me just to get front panel selection of 2 antennas.


So looking at the schematic, I saw how easy it would be to modify my 
KANT board to allow 2 antenna selection. I bread boarded up my 
schematic and It works exactly as I expected.


So I'm debating having some pc boards made to replace the entire KANT 
board but only if there is enough interest to justify doing so and I 
wanted to see how y'all felt about it. I project the bare boards 
would run around $20 to $25. You would take the parts from your 
existing KANT and reuse them on this new board, in addition to adding 
around $12 worth of new parts. So for under $40, you could have dual 
antenna selection on your non-KATU equipped K3.


Any interest?

Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com