Re: [Elecraft] [K2] KAT100 error
Hi Karl, Yes, both check out fine with my MFJ-269 Thanks for the suggestion. KARL MARDERIAN wrote: Hi, n6xvt Karl. 1 is the cable from radio to dummy load good? 2 is the dummy load any good? 73 n6xvt Sent from my iPhone On Sep 22, 2009, at 6:41 PM, W4HDM w4...@bellsouth.net wrote: My KAT100 was working fine then developed a problem recently. For those wondering what happened to my for sale listing this is why I removed it. At first the tune sequence would tune at times and other times it would stay at 9.9-1 and the lights would work most of the time. (Using a dummy load as well as an antenna) I checked the solder connections in the KAT100 and retouched a few. I noticed no change in behavior. I put the radio away for a few days and revisited the problem today Before doing anything I did a SWR Bridge alignment on the KPA100 just to be sure nothing had changed. I adjusted for 0 voltage using a DMM as instructed in the manual. Currently, the tune sequence gives a 1.0-1 reading on the K2 meter but the scale lights on the KAT100 do not light up while tuning or when keying. The antenna and power lights are working properly. When keying 100 watts into a dummy load the power is reduced by various amounts depending on the band and the K2 shows HI Refl, the same symptoms using an antenna. Using the menu for tuner readings, after hitting tune in the dummy load, I get: L00.4 C0.08 nET2 t 197 E243 Init F1.05 L0-L8 get relay clicks as well as C0-C8 and N1-N2 I am using the The KAT100/KPA100 in their own enclosure. Any help on where I should start from here to solve the problem? Thanks, Damon (Don .. I sent you an email on this when the symptoms first started, maybe it was lost in SPAM) - W4HDM-DAMON-K2#473 -- View this message in context: http://n2.nabble.com/KAT100-error-tp3696887p3696887.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - W4HDM-DAMON-K2#473 -- View this message in context: http://n2.nabble.com/KAT100-error-tp3696887p3705656.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] KAT100 error
Damon, First, remove the KPA100 from the picture (remove it from the EC2 enclosure) and connect the KAT100 directly to the base K2 and see if it works OK - if my suspicion is correct, it will. If the KAT100 checks out, then check 2 things - first diodes D16 and D17 in the KPA100 and the short coax you are using between the KPA100 and the KAT100. Let me know what you find. 73, Don W3FPR W4HDM wrote: My KAT100 was working fine then developed a problem recently. For those wondering what happened to my for sale listing this is why I removed it. At first the tune sequence would tune at times and other times it would stay at 9.9-1 and the lights would work most of the time. (Using a dummy load as well as an antenna) I checked the solder connections in the KAT100 and retouched a few. I noticed no change in behavior. I put the radio away for a few days and revisited the problem today Before doing anything I did a SWR Bridge alignment on the KPA100 just to be sure nothing had changed. I adjusted for 0 voltage using a DMM as instructed in the manual. Currently, the tune sequence gives a 1.0-1 reading on the K2 meter but the scale lights on the KAT100 do not light up while tuning or when keying. The antenna and power lights are working properly. When keying 100 watts into a dummy load the power is reduced by various amounts depending on the band and the K2 shows HI Refl, the same symptoms using an antenna. Using the menu for tuner readings, after hitting tune in the dummy load, I get: L00.4 C0.08 nET2 t 197 E243 Init F1.05 L0-L8 get relay clicks as well as C0-C8 and N1-N2 I am using the The KAT100/KPA100 in their own enclosure. Any help on where I should start from here to solve the problem? Thanks, Damon (Don .. I sent you an email on this when the symptoms first started, maybe it was lost in SPAM) - W4HDM-DAMON-K2#473 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] KAT100 error
Thanks Don I will do this now and post the results. Don Wilhelm-4 wrote: Damon, First, remove the KPA100 from the picture (remove it from the EC2 enclosure) and connect the KAT100 directly to the base K2 and see if it works OK - if my suspicion is correct, it will. If the KAT100 checks out, then check 2 things - first diodes D16 and D17 in the KPA100 and the short coax you are using between the KPA100 and the KAT100. Let me know what you find. 73, Don W3FPR W4HDM wrote: My KAT100 was working fine then developed a problem recently. For those wondering what happened to my for sale listing this is why I removed it. At first the tune sequence would tune at times and other times it would stay at 9.9-1 and the lights would work most of the time. (Using a dummy load as well as an antenna) I checked the solder connections in the KAT100 and retouched a few. I noticed no change in behavior. I put the radio away for a few days and revisited the problem today Before doing anything I did a SWR Bridge alignment on the KPA100 just to be sure nothing had changed. I adjusted for 0 voltage using a DMM as instructed in the manual. Currently, the tune sequence gives a 1.0-1 reading on the K2 meter but the scale lights on the KAT100 do not light up while tuning or when keying. The antenna and power lights are working properly. When keying 100 watts into a dummy load the power is reduced by various amounts depending on the band and the K2 shows HI Refl, the same symptoms using an antenna. Using the menu for tuner readings, after hitting tune in the dummy load, I get: L00.4 C0.08 nET2 t 197 E243 Init F1.05 L0-L8 get relay clicks as well as C0-C8 and N1-N2 I am using the The KAT100/KPA100 in their own enclosure. Any help on where I should start from here to solve the problem? Thanks, Damon (Don .. I sent you an email on this when the symptoms first started, maybe it was lost in SPAM) - W4HDM-DAMON-K2#473 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - W4HDM-DAMON-K2#473 -- View this message in context: http://n2.nabble.com/KAT100-error-tp3696887p3699480.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] KAT100 error
Don, Ok I removed the KPA100 and connected directly to the K2, I also tested with 2 different jumpers, as well as useing the RF in and the AUX connection. All give the same results: KAT100's relays sound and the K2 shows 1.0-1 swr. Lights on the KAT100 do not light up on tune or TX. K2 reduced power on key up (at 10 watts setting and 5 watt setting). Occasionally I get a High Current message. Current set at 3.50 I checked the RS232 for continuity and it is OK. I started doing the test in the KAT100 Manual. When I set the antenna to 2 and turn off the K2 and then back on I noted the antenna back on ANT 1 I also noticed when first powered up the lights on the KAT100 are bright but then dim a bit. Maybe this will point towards the problem? I suspect I have a bad solder point somewhere in the KAT100. Don Wilhelm-4 wrote: Damon, First, remove the KPA100 from the picture (remove it from the EC2 enclosure) and connect the KAT100 directly to the base K2 and see if it works OK - if my suspicion is correct, it will. If the KAT100 checks out, then check 2 things - first diodes D16 and D17 in the KPA100 and the short coax you are using between the KPA100 and the KAT100. Let me know what you find. 73, Don W3FPR W4HDM wrote: My KAT100 was working fine then developed a problem recently. For those wondering what happened to my for sale listing this is why I removed it. At first the tune sequence would tune at times and other times it would stay at 9.9-1 and the lights would work most of the time. (Using a dummy load as well as an antenna) I checked the solder connections in the KAT100 and retouched a few. I noticed no change in behavior. I put the radio away for a few days and revisited the problem today Before doing anything I did a SWR Bridge alignment on the KPA100 just to be sure nothing had changed. I adjusted for 0 voltage using a DMM as instructed in the manual. Currently, the tune sequence gives a 1.0-1 reading on the K2 meter but the scale lights on the KAT100 do not light up while tuning or when keying. The antenna and power lights are working properly. When keying 100 watts into a dummy load the power is reduced by various amounts depending on the band and the K2 shows HI Refl, the same symptoms using an antenna. Using the menu for tuner readings, after hitting tune in the dummy load, I get: L00.4 C0.08 nET2 t 197 E243 Init F1.05 L0-L8 get relay clicks as well as C0-C8 and N1-N2 I am using the The KAT100/KPA100 in their own enclosure. Any help on where I should start from here to solve the problem? Thanks, Damon (Don .. I sent you an email on this when the symptoms first started, maybe it was lost in SPAM) - W4HDM-DAMON-K2#473 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - W4HDM-DAMON-K2#473 -- View this message in context: http://n2.nabble.com/KAT100-error-tp3696887p3699797.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] KAT100 error
Hi, n6xvt Karl. 1 is the cable from radio to dummy load good? 2 is the dummy load any good? 73 n6xvt Sent from my iPhone On Sep 22, 2009, at 6:41 PM, W4HDM w4...@bellsouth.net wrote: My KAT100 was working fine then developed a problem recently. For those wondering what happened to my for sale listing this is why I removed it. At first the tune sequence would tune at times and other times it would stay at 9.9-1 and the lights would work most of the time. (Using a dummy load as well as an antenna) I checked the solder connections in the KAT100 and retouched a few. I noticed no change in behavior. I put the radio away for a few days and revisited the problem today Before doing anything I did a SWR Bridge alignment on the KPA100 just to be sure nothing had changed. I adjusted for 0 voltage using a DMM as instructed in the manual. Currently, the tune sequence gives a 1.0-1 reading on the K2 meter but the scale lights on the KAT100 do not light up while tuning or when keying. The antenna and power lights are working properly. When keying 100 watts into a dummy load the power is reduced by various amounts depending on the band and the K2 shows HI Refl, the same symptoms using an antenna. Using the menu for tuner readings, after hitting tune in the dummy load, I get: L00.4 C0.08 nET2 t 197 E243 Init F1.05 L0-L8 get relay clicks as well as C0-C8 and N1-N2 I am using the The KAT100/KPA100 in their own enclosure. Any help on where I should start from here to solve the problem? Thanks, Damon (Don .. I sent you an email on this when the symptoms first started, maybe it was lost in SPAM) - W4HDM-DAMON-K2#473 -- View this message in context: http://n2.nabble.com/KAT100-error-tp3696887p3696887.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] KAT100 error
Damon, Thanks for removing the KPA100 from the picture, now we know the problem is the KAT100 or the base K2. To eliminate the base K2 from suspicion, test it into a dummy load and see if the HiCUR messages are still present. While looking for solder problems, first check pin 1 of the KAT100 firmware socket. What you are describing sounds a lot like a problem with the firmware chip. 73, Don W3FPR W4HDM wrote: Don, Ok I removed the KPA100 and connected directly to the K2, I also tested with 2 different jumpers, as well as useing the RF in and the AUX connection. All give the same results: KAT100's relays sound and the K2 shows 1.0-1 swr. Lights on the KAT100 do not light up on tune or TX. K2 reduced power on key up (at 10 watts setting and 5 watt setting). Occasionally I get a High Current message. Current set at 3.50 I checked the RS232 for continuity and it is OK. I started doing the test in the KAT100 Manual. When I set the antenna to 2 and turn off the K2 and then back on I noted the antenna back on ANT 1 I also noticed when first powered up the lights on the KAT100 are bright but then dim a bit. Maybe this will point towards the problem? I suspect I have a bad solder point somewhere in the KAT100. Don Wilhelm-4 wrote: Damon, First, remove the KPA100 from the picture (remove it from the EC2 enclosure) and connect the KAT100 directly to the base K2 and see if it works OK - if my suspicion is correct, it will. If the KAT100 checks out, then check 2 things - first diodes D16 and D17 in the KPA100 and the short coax you are using between the KPA100 and the KAT100. Let me know what you find. 73, Don W3FPR W4HDM wrote: My KAT100 was working fine then developed a problem recently. For those wondering what happened to my for sale listing this is why I removed it. At first the tune sequence would tune at times and other times it would stay at 9.9-1 and the lights would work most of the time. (Using a dummy load as well as an antenna) I checked the solder connections in the KAT100 and retouched a few. I noticed no change in behavior. I put the radio away for a few days and revisited the problem today Before doing anything I did a SWR Bridge alignment on the KPA100 just to be sure nothing had changed. I adjusted for 0 voltage using a DMM as instructed in the manual. Currently, the tune sequence gives a 1.0-1 reading on the K2 meter but the scale lights on the KAT100 do not light up while tuning or when keying. The antenna and power lights are working properly. When keying 100 watts into a dummy load the power is reduced by various amounts depending on the band and the K2 shows HI Refl, the same symptoms using an antenna. Using the menu for tuner readings, after hitting tune in the dummy load, I get: L00.4 C0.08 nET2 t 197 E243 Init F1.05 L0-L8 get relay clicks as well as C0-C8 and N1-N2 I am using the The KAT100/KPA100 in their own enclosure. Any help on where I should start from here to solve the problem? Thanks, Damon (Don .. I sent you an email on this when the symptoms first started, maybe it was lost in SPAM) - W4HDM-DAMON-K2#473 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - W4HDM-DAMON-K2#473 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.112/2390 - Release Date: 09/23/09 05:52:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html