Re: [Elecraft] Elecraft K2 filters?
Gavin, The K2 uses a single voltage-variable capacitance (varicap) diode-tuned crystal filter on the main RF board, and the filter bandwidths are programmable by the user within a moderate range. A separate fixed bandwidth crystal filter is present on the KSB2 SSB option board if installed. A no additional equipment procedure for adjusting the variable bandwidth filter is described in the K2 manual, but most operators use a computer-based spectrum analysis tool (e.g. Spectrogram) to visualize the filter passband while the tuning adjustment is being made. Check out Don, W3FPR's web page (http://w3fpr.com/) for a link to the free versions of Spectrogram and tips on adjusting the K2 filter settings for different modes and desired bandwidths. 73, Mike, K8CN -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-K2-filters-tp7589831p7589832.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft K2 filters?
In addition to the tuneable IF crystal filter, there are the KAF2 and KDSP audio filter option (check out the Elecraft website for details). 73, Matt VK2RQ On 2 Jun 2014, at 11:38 am, Mike K8CN mike.car...@unh.edu wrote: Gavin, The K2 uses a single voltage-variable capacitance (varicap) diode-tuned crystal filter on the main RF board, and the filter bandwidths are programmable by the user within a moderate range. A separate fixed bandwidth crystal filter is present on the KSB2 SSB option board if installed. A no additional equipment procedure for adjusting the variable bandwidth filter is described in the K2 manual, but most operators use a computer-based spectrum analysis tool (e.g. Spectrogram) to visualize the filter passband while the tuning adjustment is being made. Check out Don, W3FPR's web page (http://w3fpr.com/) for a link to the free versions of Spectrogram and tips on adjusting the K2 filter settings for different modes and desired bandwidths. 73, Mike, K8CN -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-K2-filters-tp7589831p7589832.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to matt.vk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft K2 filters?
Gavin, As has been explained by a couple others, the K2 filters (other than the OP1 filter on the KSB2 option board) are entirely user configurable - you can set the filter width and the filter center frequency as you desire. You can find information for doing that at my website www.w3fpr.com in part 3 of the article on K2 Dial Calibration. If you need Spectrogram, the download link to my local files can be found near the bottom of the opening page. Additional information on aligning the K2 filters can be found on Tom Hammond N0SS's (SK) website. The content of his website is being preserved by the Mid-Missouri Radio Club as part of their website - see http://www.mmccs.com/mmarc/n0ss/. 73, Don W3FPR On 6/1/2014 9:17 PM, gavin barbara williams wrote: As far I know I cannot see any filter options for the K2, am I correct? Currently looking at a K2 sn low 4XXX. It is advertised as It has 1.7kHz, 700Hz, 400Hz and 100Hz filters fitted . Is this possible. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com