RE: [Elecraft] K3 Firmware Download Problems. Hopefully solved.
I put a note based on Mike's experience into the USB troubleshooting page of K3 Utility Help, but maybe it was an RS-232 cable rather than USB to Serial Dapter. Mike which was it? Thanks, Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Yarnes Sent: Monday, May 05, 2008 9:18 AM To: Mike; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Firmware Download Problems. Hopefully solved. Gads! I never would have thought of trying that! I can't wait for someone to give a logical explanation of what the problem could have been. I'm afraid all that tells me is that the wall socket you were using initially may have a problem. Have you checked it? Dave W7AQK - Original Message - From: "Mike" <[EMAIL PROTECTED]> To: Sent: Sunday, May 04, 2008 6:22 PM Subject: [Elecraft] K3 Firmware Download Problems. Hopefully solved. > Some readers may recall my ongoing problems loading new firmware to K3 > #0215. > > I *may* have solved this problem.During problems with the > 01.78/01.58 download, I changed the physical config of my K3 & PC. - They > had been plugged into 2 different wall sockets in the shack. I moved the > Ks & its power supply into the same socket as my PC & the 01.78/01.58 > download then worked well. Yesterday I downloaded 01.87/01.69, using > this same config, & all went well. > > It may not be a cure-all for everyone's problems, but could be classed as > 'one more thing to check' & has been reported to K3Support. > > 73 de Mike, zl1mh. > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Firmware Download Problems. Hopefully solved.
Could be a ground loop problem. At the factory we have had trouble with ground loops upsetting RS232 communication between the device under test and the test controller PC... and are careful about our AC mains power arrangements. We try to keep all AC power cords for test gear, PC, etc. on the station plugged into a common power strip. Sometimes optical isolation of RS232 paths is needed for really complicated configurations, where RS232 and USB paths exist both between the controller PC and the test fixture (which has embedded microcontroller) and between the test fixture and the DUT. Bob NW8L On Mon, May 5, 2008 at 9:18 AM, David Yarnes <[EMAIL PROTECTED]> wrote: > Gads! I never would have thought of trying that! I can't wait for someone > to give a logical explanation of what the problem could have been. I'm > afraid all that tells me is that the wall socket you were using initially > may have a problem. Have you checked it? > > Dave W7AQK > > - Original Message - From: "Mike" <[EMAIL PROTECTED]> > To: > Sent: Sunday, May 04, 2008 6:22 PM > Subject: [Elecraft] K3 Firmware Download Problems. Hopefully solved. > > > > > Some readers may recall my ongoing problems loading new firmware to K3 > #0215. > > > > I *may* have solved this problem.During problems with the > 01.78/01.58 download, I changed the physical config of my K3 & PC. - They > had been plugged into 2 different wall sockets in the shack. I moved the Ks > & its power supply into the same socket as my PC & the 01.78/01.58 download > then worked well. Yesterday I downloaded 01.87/01.69, using this same > config, & all went well. > > > > It may not be a cure-all for everyone's problems, but could be classed as > 'one more thing to check' & has been reported to K3Support. > > > > 73 de Mike, zl1mh. > > ___ > > Elecraft mailing list > > Post to: Elecraft@mailman.qth.net > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Firmware Download Problems. Hopefully solved.
Gads! I never would have thought of trying that! I can't wait for someone to give a logical explanation of what the problem could have been. I'm afraid all that tells me is that the wall socket you were using initially may have a problem. Have you checked it? Dave W7AQK - Original Message - From: "Mike" <[EMAIL PROTECTED]> To: Sent: Sunday, May 04, 2008 6:22 PM Subject: [Elecraft] K3 Firmware Download Problems. Hopefully solved. Some readers may recall my ongoing problems loading new firmware to K3 #0215. I *may* have solved this problem.During problems with the 01.78/01.58 download, I changed the physical config of my K3 & PC. - They had been plugged into 2 different wall sockets in the shack. I moved the Ks & its power supply into the same socket as my PC & the 01.78/01.58 download then worked well. Yesterday I downloaded 01.87/01.69, using this same config, & all went well. It may not be a cure-all for everyone's problems, but could be classed as 'one more thing to check' & has been reported to K3Support. 73 de Mike, zl1mh. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
