Re: [Elecraft] KX3 case advice
I use a 6X9 Padded Case made by Maxpedition. http://www.maxpedition.com/store/pc/6-x-9-Padded-Pouch-13p1211.htm It works very well for me. It is too big for belt carry. It will easily go inside or attach to your backpack or go inside your suit case. It is made very well. Amazon carries them. 73, Dan KM6CQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
Size will depend on how many accessories/batteries, etc. you want to also put inside, but I have a Pelican Storm iM2050 which is very well made and not expensive. With the heat sink installed, you may wish to bump up to the next size over what I have if you plan on putting in any additional stuff. Images here: http://kq2rp.tumblr.com/post/47831060330/new-pelican-storm-im2050-case-to-keep-my-kx3-safe http://kq2rp.tumblr.com/post/102637603515/space-savers-i-picked-up-a-pair-of-these-audio 72, Chris KQ2RP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
An alternative to the Pelican is a pretty decent one offered by Marlin P. Jones Associates, a surplus place out of Florida. I use one of their larger size ones for the KX3. It has pluckable foam and is a tad bit cheaper than the Pelican. No manufacturer's markings on it, but it looks like it might be a (probably Chinese) knockoff of one of the Pelican style cases. They have two sizes, 12 X 7.4 X 4.4 inches ( http://www.mpja.com/12in-X-74in-X-44in-Waterproof-Case/productinfo/18351%20BX/ ) in which the KX3 fits nicely along with a 3 amp power supply, microphone, some cables/adapters and the Elecraft key paddle for the KX3. I use their smaller one for the PX3 along with it's cables. The smaller one is 9.3 X 6.2 X 3.5 inches ( http://www.mpja.com/93in-X-62in-X-35in-Waterproof-Case/productinfo/17813%20BX/ ) with the same pluckable foam. Both cases are very water resistant if not totally waterproof like claimed and they have pressure relief valves on them for shipping via aircraft. They also have locking holes for padlocks if needed. They are quite well made out of molded ABS plastic, O ring sealed and very positive latches on the covers. usual disclamer, no interest in MPJA other than a satisfied customer. Jim - W0EB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
An alternative to the Pelican is a pretty decent one offered by Marlin P. Jones Associates, a surplus place out of Florida. I use one of their larger size ones for the KX3. It has pluckable foam and is a tad bit cheaper than the Pelican. No manufacturer's markings on it, but it looks like it might be a (probably Chinese) knockoff of one of the Pelican style cases. They have two sizes, 12 X 7.4 X 4.4 inches ( http://www.mpja.com/12in-X-74in-X-44in-Waterproof-Case/productinfo/18351%20BX/ ) in which the KX3 fits nicely along with a 3 amp power supply, microphone, some cables/adapters and the Elecraft key paddle for the KX3. I use their smaller one for the PX3 along with it's cables. The smaller one is 9.3 X 6.2 X 3.5 inches ( http://www.mpja.com/93in-X-62in-X-35in-Waterproof-Case/productinfo/17813%20BX/ ) with the same pluckable foam. Both cases are very water resistant if not totally waterproof like claimed and they have pressure relief valves on them for shipping via aircraft. They also have locking holes for padlocks if needed. They are quite well made out of molded ABS plastic, O ring sealed and very positive latches on the covers. usual disclamer, no interest in MPJA other than a satisfied customer. Jim - W0EB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
I use a Pelican 1400, but that is a hard case. Gary Mitchelson NC3Z Davidsonville, MD FM18 NC3Z/4 Pamlico County, NC FM15 www.mitchelson.org On 12/18/2014 3:55 PM, Mark Tellez wrote: Hello, I am looking for a case that will protect my KX3. I have the sidekick handles and cover attached and also the Pro-Engineering heat sink. I was originally hoping to use the Hazard 4 Jelly Roll case but I found out that it is too snug (just barely) with these extra items attached. Any suggestions? Mark __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to nc3z.g...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
I think Rose is still making cases: I have one and it's the best. I can get my whole station in it no problem. KX3, All accessories, log book/tablet, 50' of coax, Antenna and throwing line kit. http://www.smugmug.com/gallery/7058736_hZbo4/1/452236459_Bc3aF#!i=452236459k=vLrLtL2 Best 72/73 Steve - Steve Roberts-W1SFR Sudbury, VT http://www.kx3helper.com Fists, CW OPS, QRP ARCI, SKCC, NEQRP, NAQCC, FP, ARRL, Green Mountain Wireless Society (802)779-7489 (cell) On Dec 18, 2014, at 3:55 PM, Mark Tellez wrote: Hello, I am looking for a case that will protect my KX3. I have the sidekick handles and cover attached and also the Pro-Engineering heat sink. I was originally hoping to use the Hazard 4 Jelly Roll case but I found out that it is too snug (just barely) with these extra items attached. Any suggestions? Mark __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to steve...@shoreham.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
I should mention that I liked the idea (at least conceptually) of the small molle pouch that can be attached to any other radio bag or backpack. I have been debating a larger standalone case (like a Pelican case) or camera bag (I liked the Lowe one!) but then I think about using it in the field. I will probably have a larger day pack so I am looking for something small (but protective) that can go inside said pack or be attached to the outside. It is very helpful to hear what others are using! Thanks for the feedback. Mark On Thu, Dec 18, 2014 at 1:55 PM, Mark Tellez aar...@gmail.com wrote: Hello, I am looking for a case that will protect my KX3. I have the sidekick handles and cover attached and also the Pro-Engineering heat sink. I was originally hoping to use the Hazard 4 Jelly Roll case but I found out that it is too snug (just barely) with these extra items attached. Any suggestions? Mark __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
I have to admit, I really like this setup. http://www.oe2atn.at/tom/gobox/ Mike va3mw On Thu, Dec 18, 2014 at 4:45 PM, Mark Tellez aar...@gmail.com wrote: I should mention that I liked the idea (at least conceptually) of the small molle pouch that can be attached to any other radio bag or backpack. I have been debating a larger standalone case (like a Pelican case) or camera bag (I liked the Lowe one!) but then I think about using it in the field. I will probably have a larger day pack so I am looking for something small (but protective) that can go inside said pack or be attached to the outside. It is very helpful to hear what others are using! Thanks for the feedback. Mark On Thu, Dec 18, 2014 at 1:55 PM, Mark Tellez aar...@gmail.com wrote: Hello, I am looking for a case that will protect my KX3. I have the sidekick handles and cover attached and also the Pro-Engineering heat sink. I was originally hoping to use the Hazard 4 Jelly Roll case but I found out that it is too snug (just barely) with these extra items attached. Any suggestions? Mark __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to va...@portcredit.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
I found the Condor H2O case a perfect fit for the KX3 with sidekick and cover. Not sure its large enough for the heatsink too… It has enough padding/insulation that I really don’t worry about the radio as long as the cover is on it. http://www.condoroutdoor.com/ma40h2opouch.aspx http://www.condoroutdoor.com/ma40h2opouch.aspx On Dec 18, 2014, at 5:14 PM, Michael Walker va...@portcredit.net wrote: I have to admit, I really like this setup. http://www.oe2atn.at/tom/gobox/ Mike va3mw On Thu, Dec 18, 2014 at 4:45 PM, Mark Tellez aar...@gmail.com wrote: I should mention that I liked the idea (at least conceptually) of the small molle pouch that can be attached to any other radio bag or backpack. I have been debating a larger standalone case (like a Pelican case) or camera bag (I liked the Lowe one!) but then I think about using it in the field. I will probably have a larger day pack so I am looking for something small (but protective) that can go inside said pack or be attached to the outside. It is very helpful to hear what others are using! Thanks for the feedback. Mark On Thu, Dec 18, 2014 at 1:55 PM, Mark Tellez aar...@gmail.com wrote: Hello, I am looking for a case that will protect my KX3. I have the sidekick handles and cover attached and also the Pro-Engineering heat sink. I was originally hoping to use the Hazard 4 Jelly Roll case but I found out that it is too snug (just barely) with these extra items attached. Any suggestions? Mark Steve - KY7K k...@arrl.net Get OUT and play radio! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
That leaves the heatsink sealed up in the box, so it is likely to overheat. wunder K6WRU CM87wj http://observer.wunderwood.org/ On Dec 18, 2014, at 4:14 PM, Michael Walker va...@portcredit.net wrote: I have to admit, I really like this setup. http://www.oe2atn.at/tom/gobox/ Mike va3mw On Thu, Dec 18, 2014 at 4:45 PM, Mark Tellez aar...@gmail.com wrote: I should mention that I liked the idea (at least conceptually) of the small molle pouch that can be attached to any other radio bag or backpack. I have been debating a larger standalone case (like a Pelican case) or camera bag (I liked the Lowe one!) but then I think about using it in the field. I will probably have a larger day pack so I am looking for something small (but protective) that can go inside said pack or be attached to the outside. It is very helpful to hear what others are using! Thanks for the feedback. Mark On Thu, Dec 18, 2014 at 1:55 PM, Mark Tellez aar...@gmail.com wrote: Hello, I am looking for a case that will protect my KX3. I have the sidekick handles and cover attached and also the Pro-Engineering heat sink. I was originally hoping to use the Hazard 4 Jelly Roll case but I found out that it is too snug (just barely) with these extra items attached. Any suggestions? Mark __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to va...@portcredit.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 case advice
I used a Pelican 1300 case to bring my KX3, PX3, cables MN3, KX3 cw paddle, BNC-binding post adapter, home brew 6w dummy load, Pro Audio Engineering PAE-KX33 power supply, and more cables to New Hampshire via Southwest Airlines. I also had 2 wire antennas separately in the suit case, but most of the coax lives here. Having just fought through the W1AW/4 pileup on 40M QRP cw, I'm quite happy with the results. Of course there are always improvements I can make to the antennas, but that will probably wait until next spring. I also have a number of UI issues with the PX3, but I'm trying to work with it. (That might be something for a different thread.) For air travel, the Pelican works quite well. For backpacking, I'd like one of Rose's. Since she is just finishing chemotherapy, I would not expect her to have the energy for sewing. I'm wishing her a speedy recovery, so I can place my order. :-) 73 Bill AE6JV --- Bill Frantz| Privacy is dead, get over| Periwinkle (408)356-8506 | it. | 16345 Englewood Ave www.pwpconsult.com | - Scott McNealy | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com