Re: [PSES] EN 55022 for iTE
Bill, Thanks for your advice. I believe it is a new requirement and afraid no accredited labs doing this test. It sounds the big labs should be equipped with the necessary facilities since the standard becomes in force already. Thanks to all replies! Regards, Scott On 22/11/2011 12:34 AM, Bill Stumpf bstu...@dlsemc.com wrote: Scott, Testing to 6GHz became mandatory on October 1, 2011. You can comply with EN55022:2006 / A1:2007, or EN55022:2010. Testing above 1GHz is conditional based on the clock /timing signals of the device being tested. I would hope that labs are equipped and educated to test above 1GHz since it has been an FCC requirement for years. Test sites (OATS of chambers) must also meet CISPR 16 requirements for Site VSWR above 1GHz. Bill Bill Stumpf D.L.S. Electronic Systems, Inc. 166 South Carter Street Genoa City WI 53128 Ph: 262-279-0210 Email: bstu...@dlsemc.com -Original Message- From: Scott Xe [mailto:scott...@gmail.com] Sent: Saturday, November 19, 2011 10:30 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] EN 55022 for iTE Dear All, I have learnt that the latest version requires to test the products upto 6 GHz from 1 GHz. When will it commence on which amendment? Have most of public labs well equipped to conduct the test to the new requirements? Thanks and regards, Scott - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] EN 55022 for iTE
Scott We have been testing radiated emission above 1 GHz for EN 55022: 2006/A1:2007 for a few years. ITL is accredited by A2LA. Regards, David Shidlowsky | Technical Writer Address 1 Bat-Sheva St. POB 87, LOD 71100 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail e...@itl.co.il/dav...@itl.co.il Web www.itl.co.il Fill out Customer Satisfaction Survey Global Certifications You Can Trust -Original Message- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Scott Xe Sent: Tuesday, November 22, 2011 6:44 PM To: Bill Stumpf; EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: EN 55022 for iTE Bill, Thanks for your advice. I believe it is a new requirement and afraid no accredited labs doing this test. It sounds the big labs should be equipped with the necessary facilities since the standard becomes in force already. Thanks to all replies! Regards, Scott On 22/11/2011 12:34 AM, Bill Stumpf bstu...@dlsemc.com wrote: Scott, Testing to 6GHz became mandatory on October 1, 2011. You can comply with EN55022:2006 / A1:2007, or EN55022:2010. Testing above 1GHz is conditional based on the clock /timing signals of the device being tested. I would hope that labs are equipped and educated to test above 1GHz since it has been an FCC requirement for years. Test sites (OATS of chambers) must also meet CISPR 16 requirements for Site VSWR above 1GHz. Bill Bill Stumpf D.L.S. Electronic Systems, Inc. 166 South Carter Street Genoa City WI 53128 Ph: 262-279-0210 Email: bstu...@dlsemc.com -Original Message- From: Scott Xe [mailto:scott...@gmail.com] Sent: Saturday, November 19, 2011 10:30 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] EN 55022 for iTE Dear All, I have learnt that the latest version requires to test the products upto 6 GHz from 1 GHz. When will it commence on which amendment? Have most of public labs well equipped to conduct the test to the new requirements? Thanks and regards, Scott - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] EN 55022 for iTE
In the US they are. Measurements above 1Ghz have been around for some time. The upper level limit is established by the highest generated clock frequency, and has been for many years - but more importantly I think that the EU and US have different test setup requirements. Doesn't the EU version require a fully anechoic chamber? -Original Message- From: Scott Xe [mailto:scott...@gmail.com] Sent: Saturday, November 19, 2011 8:30 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] EN 55022 for iTE Dear All, I have learnt that the latest version requires to test the products upto 6 GHz from 1 GHz. When will it commence on which amendment? Have most of public labs well equipped to conduct the test to the new requirements? Thanks and regards, Scott - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] EN 55022 for iTE
Scott, Testing to 6GHz became mandatory on October 1, 2011. You can comply with EN55022:2006 / A1:2007, or EN55022:2010. Testing above 1GHz is conditional based on the clock /timing signals of the device being tested. I would hope that labs are equipped and educated to test above 1GHz since it has been an FCC requirement for years. Test sites (OATS of chambers) must also meet CISPR 16 requirements for Site VSWR above 1GHz. Bill Bill Stumpf D.L.S. Electronic Systems, Inc. 166 South Carter Street Genoa City WI 53128 Ph: 262-279-0210 Email: bstu...@dlsemc.com -Original Message- From: Scott Xe [mailto:scott...@gmail.com] Sent: Saturday, November 19, 2011 10:30 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] EN 55022 for iTE Dear All, I have learnt that the latest version requires to test the products upto 6 GHz from 1 GHz. When will it commence on which amendment? Have most of public labs well equipped to conduct the test to the new requirements? Thanks and regards, Scott - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] EN 55022 for iTE
Yup, we up graded recently. And for radios, it's 5x, so we just went with 26.5 GHz. FCC is 10x for radios. Immunity ia 2.7 vs 2.4 and setup to go to 6 GHz. Going from memory, I'm home and on vacation!! From: Scott Xe scott...@gmail.com To: EMC-PSTC@LISTSERV.IEEE.ORG EMC-PSTC@LISTSERV.IEEE.ORG Sent: Saturday, November 19, 2011 11:30 PM Subject: EN 55022 for iTE Dear All, I have learnt that the latest version requires to test the products upto 6 GHz from 1 GHz. When will it commence on which amendment? Have most of public labs well equipped to conduct the test to the new requirements? Thanks and regards, Scott - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com