Scott, Testing to 6GHz became mandatory on October 1, 2011. You can comply with EN55022:2006 / A1:2007, or EN55022:2010. Testing above 1GHz is conditional based on the clock /timing signals of the device being tested.
I would hope that labs are equipped and educated to test above 1GHz since it has been an FCC requirement for years. Test sites (OATS of chambers) must also meet CISPR 16 requirements for Site VSWR above 1GHz. Bill Bill Stumpf D.L.S. Electronic Systems, Inc. 166 South Carter Street Genoa City WI 53128 Ph: 262-279-0210 Email: bstu...@dlsemc.com -----Original Message----- From: Scott Xe [mailto:scott...@gmail.com] Sent: Saturday, November 19, 2011 10:30 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] EN 55022 for iTE Dear All, I have learnt that the latest version requires to test the products upto 6 GHz from 1 GHz. When will it commence on which amendment? Have most of public labs well equipped to conduct the test to the new requirements? Thanks and regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
