Re: [Emc-users] Setting up for hobbing, need a hand
On 6/28/20 3:52 PM, andy pugh wrote: On Sun, 28 Jun 2020 at 21:31, Ed wrote: SNIP Yes. I don't do it quite like that any more. I wrote a custom HAL component that handles the slaving and the jogging. It also (as of last weekend) handles multi-start hobs. Oh, and I changed the feed to feed-per-rev of the _blank_ and also changed the "air feeds" to straight feeds as otherwise they were painfully slow with high-count gears. If you want I can send you the whole config folder zipped up, but it obviously won't be plug-and-play unless you too are using 8i20 and 7i49. The configs would be great!! I can probably figure out the differences in a comparison print out. Thanks, Ed. ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Setting up for hobbing, need a hand
On Sun, 28 Jun 2020 at 21:31, Ed wrote: > The listing that is shown goes in the regular HAL file? It would need to be comprehended and worked-in as appropriate. > I assume the part about the A axis would be removed. It is handy to be able to jog A even whilst it is slaved, to align the work to the hob. > The files in the archive hobbing.zip would go where? Mainly in your config folder. > Are there any updates lately? Yes. I don't do it quite like that any more. I wrote a custom HAL component that handles the slaving and the jogging. It also (as of last weekend) handles multi-start hobs. Oh, and I changed the feed to feed-per-rev of the _blank_ and also changed the "air feeds" to straight feeds as otherwise they were painfully slow with high-count gears. If you want I can send you the whole config folder zipped up, but it obviously won't be plug-and-play unless you too are using 8i20 and 7i49. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Setting up for hobbing, need a hand
Looking to set up an old horizontal mill for hobbing. The machine is already set up with XYZ and A axis, spindle encoder, and has the swiveling table. The machine is set up with a Mesa 7I80hd, two 7I29's and a 7I42TA. The table left/right is X in/out Y knee is Z rotary is A I looked at http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Hobbing in the Wiki and am wondering a few things. The listing that is shown goes in the regular HAL file? I assume the part about the A axis would be removed. The loadrt's and addf's would remain the same? The files in the archive hobbing.zip would go where? Are there any other mods to the HAL file or any in the INI file? Are there any updates lately? Sorry for the long list of questions, somethings I can parse things out but this is not one of them. Thanks,Ed. ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users