Re: [Emc-users] p-port problems?

2020-08-11 Thread dave engvall 



On 8/10/20 12:45 PM, Jon Elson wrote:

On 08/10/2020 01:34 PM, mar...@r-bechtold.de wrote:

I switched to an ethernet based mesa karte

it is nearly impossible to finde a PCI or PCIe parport card that 
support Real EPP



The 8875 is REALLY old.  But, there are good PCI and PCIe cards that 
do EPP just fine.

For PCI, I prefer the SIIG cards, but a number of other ones also work.
For PCIe, I use the Syba PEX10005 cards with the MOSCHIP MCS9900 or 
MCS9901 chips.


Jon

I went digging in the midden and found a couple of pci cards. At least 
one appears to work. Now I need the correct filenames for .bit files for 
6 or more encoders and 6 channels of output. Some of the error messages 
seem to indicate I have a 400K chip but filenames for both small and 
large would help since I seem to be stumbling around in the darkness.


TIA.

Dave


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users




___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] p-port problems?

2020-08-10 Thread Gene Heskett 
On Monday 10 August 2020 14:24:22 dave engvall wrote:

> Hi,
>
> Fussing with a pci pport card; 8875F based connected to a 7i43.
> With 50 pin connectors to the left led's are  Y R R
>
> I  don't seem to get better at this as I age. :-(

Me neither Dave, had to look it up, never had one of them things.

> Any help will be greatly appreciated!
>
> Thanks in advance.
>
> Dave
>
> LINUXCNC - 2.7.15
> Machine configuration directory is
> '/home/dave/linuxcnc/configs/by_interface.mesa.hm2-servo'
> Machine configuration file is '7i43-small.ini'
> Starting LinuxCNC...
> Found file(REL): ./hm2-servo.hal
> hm2: loading Mesa HostMot2 driver version 0.15
> hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3
> hm2_7i43: /DONE is not low after CPLD reset!
> hm2_7i43: /DONE is not low after CPLD reset!
> Shutting down and cleaning up LinuxCNC...
> hm2: unloading
> LinuxCNC terminated with an error.  You can find more information in
> the log:
>      /home/dave/linuxcnc_debug.txt
>
>
> bits and pieces from dmesg:
>
> [    4.526991] lp: driver loaded but no devices found
> [    4.637563] ppdev: user-space parallel port driver
> [    4.646072] parport_pc: ITE8875 found (1P)
> [    4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
> [    4.746433] lp0: using parport0 (polling).
> [    4.747949] parport_pc: ITE 8872 parallel port: io=0x1200
>
> [    4.753978] parport1: PC-style at 0x378 (0x778)
> [PCSPP,TRISTATE,EPP] [    4.754034] parport1: irq 7 detected
> [    4.850046] lp1: using parport1 (polling).
> [    4.526991] lp: driver loaded but no devices found
> [    4.637563] ppdev: user-space parallel port driver
> [    4.646072] parport_pc: ITE8875 found (1P)
> [    4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
> [    4.746433] lp0: using parport0 (polling).
> [    4.747949] parport_pc: ITE 8872 parallel port: io=0x1200
>
> [    4.753978] parport1: PC-style at 0x378 (0x778)
> [PCSPP,TRISTATE,EPP] [    4.754034] parport1: irq 7 detected
> [    4.850046] lp1: using parport1 (polling).
> ./hm2-servo.hal:43: /usr/bin/rtapi_app exited without becoming ready
> ./hm2-servo.hal:43: insmod for hm2_7i43 failed, returned -1
> Shutting down and cleaning up LinuxCNC...
> hm2: unloading:
>
>
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] p-port problems?

2020-08-10 Thread Jon Elson 

On 08/10/2020 01:34 PM, mar...@r-bechtold.de wrote:

I switched to an ethernet based mesa karte

it is nearly impossible to finde a PCI or PCIe parport card that support Real 
EPP


The 8875 is REALLY old.  But, there are good PCI and PCIe 
cards that do EPP just fine.
For PCI, I prefer the SIIG cards, but a number of other ones 
also work.
For PCIe, I use the Syba PEX10005 cards with the MOSCHIP 
MCS9900 or MCS9901 chips.


Jon


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] p-port problems?

2020-08-10 Thread mar...@r-bechtold.de 
I switched to an ethernet based mesa karte 

it is nearly impossible to finde a PCI or PCIe parport card that support Real 
EPP


> Am 10.08.2020 um 20:24 schrieb dave engvall :
> 
> Hi,
> 
> Fussing with a pci pport card; 8875F based connected to a 7i43.
> With 50 pin connectors to the left led's are  Y R R
> 
> I  don't seem to get better at this as I age. :-(
> 
> Any help will be greatly appreciated!
> 
> Thanks in advance.
> 
> Dave
> 
> LINUXCNC - 2.7.15
> Machine configuration directory is 
> '/home/dave/linuxcnc/configs/by_interface.mesa.hm2-servo'
> Machine configuration file is '7i43-small.ini'
> Starting LinuxCNC...
> Found file(REL): ./hm2-servo.hal
> hm2: loading Mesa HostMot2 driver version 0.15
> hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3
> hm2_7i43: /DONE is not low after CPLD reset!
> hm2_7i43: /DONE is not low after CPLD reset!
> Shutting down and cleaning up LinuxCNC...
> hm2: unloading
> LinuxCNC terminated with an error.  You can find more information in the log:
> /home/dave/linuxcnc_debug.txt
> 
> 
> bits and pieces from dmesg:
> 
> [4.526991] lp: driver loaded but no devices found
> [4.637563] ppdev: user-space parallel port driver
> [4.646072] parport_pc: ITE8875 found (1P)
> [4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
> [4.746433] lp0: using parport0 (polling).
> [4.747949] parport_pc: ITE 8872 parallel port: io=0x1200
> 
> [4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
> [4.754034] parport1: irq 7 detected
> [4.850046] lp1: using parport1 (polling).
> [4.526991] lp: driver loaded but no devices found
> [4.637563] ppdev: user-space parallel port driver
> [4.646072] parport_pc: ITE8875 found (1P)
> [4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
> [4.746433] lp0: using parport0 (polling).
> [4.747949] parport_pc: ITE 8872 parallel port: io=0x1200
> 
> [4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
> [4.754034] parport1: irq 7 detected
> [4.850046] lp1: using parport1 (polling).
> ./hm2-servo.hal:43: /usr/bin/rtapi_app exited without becoming ready
> ./hm2-servo.hal:43: insmod for hm2_7i43 failed, returned -1
> Shutting down and cleaning up LinuxCNC...
> hm2: unloading:
> 
> 
> 
> 
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] p-port problems?

2020-08-10 Thread dave engvall 

Hi,

Fussing with a pci pport card; 8875F based connected to a 7i43.
With 50 pin connectors to the left led's are  Y R R

I  don't seem to get better at this as I age. :-(

Any help will be greatly appreciated!

Thanks in advance.

Dave

LINUXCNC - 2.7.15
Machine configuration directory is 
'/home/dave/linuxcnc/configs/by_interface.mesa.hm2-servo'

Machine configuration file is '7i43-small.ini'
Starting LinuxCNC...
Found file(REL): ./hm2-servo.hal
hm2: loading Mesa HostMot2 driver version 0.15
hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3
hm2_7i43: /DONE is not low after CPLD reset!
hm2_7i43: /DONE is not low after CPLD reset!
Shutting down and cleaning up LinuxCNC...
hm2: unloading
LinuxCNC terminated with an error.  You can find more information in the 
log:

    /home/dave/linuxcnc_debug.txt


bits and pieces from dmesg:

[    4.526991] lp: driver loaded but no devices found
[    4.637563] ppdev: user-space parallel port driver
[    4.646072] parport_pc: ITE8875 found (1P)
[    4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
[    4.746433] lp0: using parport0 (polling).
[    4.747949] parport_pc: ITE 8872 parallel port: io=0x1200

[    4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    4.754034] parport1: irq 7 detected
[    4.850046] lp1: using parport1 (polling).
[    4.526991] lp: driver loaded but no devices found
[    4.637563] ppdev: user-space parallel port driver
[    4.646072] parport_pc: ITE8875 found (1P)
[    4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
[    4.746433] lp0: using parport0 (polling).
[    4.747949] parport_pc: ITE 8872 parallel port: io=0x1200

[    4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    4.754034] parport1: irq 7 detected
[    4.850046] lp1: using parport1 (polling).
./hm2-servo.hal:43: /usr/bin/rtapi_app exited without becoming ready
./hm2-servo.hal:43: insmod for hm2_7i43 failed, returned -1
Shutting down and cleaning up LinuxCNC...
hm2: unloading:




___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users