Re: [Emc-users] Wichita fest
On Wed, Aug 18, 2010 at 04:54:53PM -0500, Stuart Stevenson wrote: > Gentlemen, > I have not heard much about an EMC Fest other than the CNC Workshop. I am > willing to host a meeting here again this year. I just need a week or two > notice. Sounds really fun - lots of interesting projects - count me in, if I can make it. I think mid to late November would be best for me (but probably not thanksgiving weekend.) Sadly all of late September through late October is out for me. -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Crikey. I wish Wichita was closer to Maryland, or Maryland was closer to Wichita. I would love to see your shop Stuart. You gots the kinda toyls I can only drool over. Mark On 08/18/2010 05:54 PM, Stuart Stevenson wrote: > Gentlemen, >I have not heard much about an EMC Fest other than the CNC Workshop. I am > willing to host a meeting here again this year. I just need a week or two > notice. >I have some projects to be worked on. If someone has a project they need > some machining done on we have machines to use here. >The G&L may still need some development. If we have a meeting scheduled I > will not work on it until the meeting. I noticed an anomaly on the X axis. I > may need a little work on the marriage between the encoder and scale. I was > working on the four speed gearbox when I noticed the noise that was teeth > missing from a gear in the gear box. The gear should be reinstalled by the > end of next week. It will need some EMC attention then. >I have the robot. I purchased mesa cards to do the interface. The mesa set > up will need some attention. I certainly need some help with the programming > and compilation of the fpga process. >The tool changer may not be completed on the Enshu. >The Junior needs a retrofit. >We could play with the laser tracker to collect geometric data for a > machine. >My geometric compensation kinematics on the Cinci needs to be expanded to > allow motion past 90 degrees. This will allow me to put EMC on the Viper. >I have another project I would like to try. I haven't built anything yet. > I want to move a hydraulic cylinder using a positive displacement pump on a > servo motor. The pump would be connected to each end of the cylinder and > pump oil from one end to the other. The system would be pressurized by a > separate pump. Thoughts or comments? >As of this moment I don't know of anything here that would interfere with > any scheduled EMC Fest. If we want to do this let's agree on a date have > some fun. >With the Enshu running I will have two machines with the Axis interface > and two machines with Touchy. >Even without an official meeting the shop is open to anyone to come here > and play (or work a project). > thanks > Stuart > > -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
if I have the funds, transportation and time i'd love to come down and play. if I can make it I'll bring my big servos and their drives, if anyone would want to fiddle with them. I havnt been keeping to close track on what people are finding on fanuc drives lately. Jim On Wed, Aug 18, 2010 at 5:54 PM, Stuart Stevenson wrote: > Gentlemen, > I have not heard much about an EMC Fest other than the CNC Workshop. I am > willing to host a meeting here again this year. I just need a week or two > notice. > I have some projects to be worked on. If someone has a project they need > some machining done on we have machines to use here. > The G&L may still need some development. If we have a meeting scheduled I > will not work on it until the meeting. I noticed an anomaly on the X axis. > I > may need a little work on the marriage between the encoder and scale. I was > working on the four speed gearbox when I noticed the noise that was teeth > missing from a gear in the gear box. The gear should be reinstalled by the > end of next week. It will need some EMC attention then. > I have the robot. I purchased mesa cards to do the interface. The mesa set > up will need some attention. I certainly need some help with the > programming > and compilation of the fpga process. > The tool changer may not be completed on the Enshu. > The Junior needs a retrofit. > We could play with the laser tracker to collect geometric data for a > machine. > My geometric compensation kinematics on the Cinci needs to be expanded to > allow motion past 90 degrees. This will allow me to put EMC on the Viper. > I have another project I would like to try. I haven't built anything yet. > I want to move a hydraulic cylinder using a positive displacement pump on a > servo motor. The pump would be connected to each end of the cylinder and > pump oil from one end to the other. The system would be pressurized by a > separate pump. Thoughts or comments? > As of this moment I don't know of anything here that would interfere with > any scheduled EMC Fest. If we want to do this let's agree on a date have > some fun. > With the Enshu running I will have two machines with the Axis interface > and two machines with Touchy. > Even without an official meeting the shop is open to anyone to come here > and play (or work a project). > thanks > Stuart > > -- > dos centavos > > -- > This SF.net email is sponsored by > > Make an app they can't live without > Enter the BlackBerry Developer Challenge > http://p.sf.net/sfu/RIM-dev2dev > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
On Thu, Aug 19, 2010 at 6:50 AM, Jim Coleman wrote: > if I have the funds, transportation and time i'd love to come down and > play. if I can make it I'll bring my big servos and their drives, if > anyone > would want to fiddle with them. I havnt been keeping to close track on > what > people are finding on fanuc drives lately. > > Jim > > We just pulled a Fanuc 10/11 off the Enshu. We are using the Fanuc drives and motors for XYZ and spindle. We will be installling PPMC and I/O hardware today. I should have the final schematics today. The machine was built in 1985. It should be a good test. -- dos centavos -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Jim Coleman wrote: > if I have the funds, transportation and time i'd love to come down and > play. if I can make it I'll bring my big servos and their drives, if anyone > would want to fiddle with them. I havnt been keeping to close track on what > people are finding on fanuc drives lately. > I've been running the older red cap motors with my brushless drive and a converter for the encoder's commutation signals. Jon -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Stuart Stevenson wrote: >> >> We just pulled a Fanuc 10/11 off the Enshu. We are using the Fanuc drives >> > and motors for XYZ and spindle. We will be installling PPMC and I/O hardware > today. I should have the final schematics today. The machine was built in > 1985. It should be a good test. > Wish I was there! November or thereabouts might work out well for me, I don't want to take too much vacation time all at once. Jon -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
my motors are brushed dc servo motor 10M and 20M, yellow caps. dont know the drives off hand. machine was built in i believe 86. the price on the motors was free and i got paid $10 an hour stripping the machine, so i cant complain a bit. I've toyed with the idea of buying the mesa dc servo drives and just using them with the 5i20 ive had over a year and havnt done anything with Jim On Thu, Aug 19, 2010 at 1:27 PM, Jon Elson wrote: > Stuart Stevenson wrote: > >> > >> We just pulled a Fanuc 10/11 off the Enshu. We are using the Fanuc > drives > >> > > and motors for XYZ and spindle. We will be installling PPMC and I/O > hardware > > today. I should have the final schematics today. The machine was built in > > 1985. It should be a good test. > > > Wish I was there! November or thereabouts might work out well for me, I > don't want to take too > much vacation time all at once. > > > Jon > > > -- > This SF.net email is sponsored by > > Make an app they can't live without > Enter the BlackBerry Developer Challenge > http://p.sf.net/sfu/RIM-dev2dev > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
On 08/18/2010 03:54 PM, Stuart Stevenson wrote: >I have not heard much about an EMC Fest other than the CNC Workshop. I am > willing to host a meeting here again this year. I just need a week or two > notice. > Ooh, ooh, i want to come! Second half of November will probably work best for me, if the STS133 launch doesn't slip. -- Sebastian Kuzminsky -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Are you going with? - Original Message - From: "Sebastian Kuzminsky" To: "Enhanced Machine Controller (EMC)" Sent: Wednesday, August 25, 2010 7:46 PM Subject: Re: [Emc-users] Wichita fest > On 08/18/2010 03:54 PM, Stuart Stevenson wrote: >>I have not heard much about an EMC Fest other than the CNC Workshop. I >> am >> willing to host a meeting here again this year. I just need a week or two >> notice. >> > > Ooh, ooh, i want to come! > > Second half of November will probably work best for me, if the STS133 > launch doesn't slip. > > > -- > Sebastian Kuzminsky > > > -- > Sell apps to millions through the Intel(R) Atom(Tm) Developer Program > Be part of this innovative community and reach millions of netbook users > worldwide. Take advantage of special opportunities to increase revenue and > speed time-to-market. Join now, and jumpstart your future. > http://p.sf.net/sfu/intel-atom-d2d > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.441 / Virus Database: 271.1.1/3086 - Release Date: 08/21/10 18:35:00 -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Heh, no, but i wish i was! The research group I work with has a payload going up and a bunch of us are going to Cape Canaveral to support the launch. This time i'm bringing my wife and kids to see the launch. Second to last shuttle launch! On 08/25/2010 02:44 PM, Belli Button wrote: > Are you going with? > > > - Original Message - > From: "Sebastian Kuzminsky" > To: "Enhanced Machine Controller (EMC)" > Sent: Wednesday, August 25, 2010 7:46 PM > Subject: Re: [Emc-users] Wichita fest > > > >> On 08/18/2010 03:54 PM, Stuart Stevenson wrote: >> >>> I have not heard much about an EMC Fest other than the CNC Workshop. I >>> am >>> willing to host a meeting here again this year. I just need a week or two >>> notice. >>> >>> >> Ooh, ooh, i want to come! >> >> Second half of November will probably work best for me, if the STS133 >> launch doesn't slip. >> -- Sebastian Kuzminsky -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Let me know if you can get an extra ticket. (like I'm the only one ;) ) - Steve Sebastian Kuzminsky wrote: > Heh, no, but i wish i was! The research group I work with has a payload > going up and a bunch of us are going to Cape Canaveral to support the > launch. > > This time i'm bringing my wife and kids to see the launch. Second to > last shuttle launch! > -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
I was invited to a launch some years ago. Just at Dawn, Quite a memorable experience. Cal - Original Message - From: "Sebastian Kuzminsky" To: "Enhanced Machine Controller (EMC)" Sent: Wednesday, August 25, 2010 17:13 Subject: Re: [Emc-users] Wichita fest > Heh, no, but i wish i was! The research group I work with has a payload > going up and a bunch of us are going to Cape Canaveral to support the > launch. > > This time i'm bringing my wife and kids to see the launch. Second to > last shuttle launch! > > > > On 08/25/2010 02:44 PM, Belli Button wrote: >> Are you going with? >> >> >> - Original Message - >> From: "Sebastian Kuzminsky" >> To: "Enhanced Machine Controller (EMC)" >> Sent: Wednesday, August 25, 2010 7:46 PM >> Subject: Re: [Emc-users] Wichita fest >> >> >> >>> On 08/18/2010 03:54 PM, Stuart Stevenson wrote: >>> >>>> I have not heard much about an EMC Fest other than the CNC >>>> Workshop. I >>>> am >>>> willing to host a meeting here again this year. I just need a week or >>>> two >>>> notice. >>>> >>>> >>> Ooh, ooh, i want to come! >>> >>> Second half of November will probably work best for me, if the STS133 >>> launch doesn't slip. >>> > > -- > Sebastian Kuzminsky > > > -- > Sell apps to millions through the Intel(R) Atom(Tm) Developer Program > Be part of this innovative community and reach millions of netbook users > worldwide. Take advantage of special opportunities to increase revenue and > speed time-to-market. Join now, and jumpstart your future. > http://p.sf.net/sfu/intel-atom-d2d > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
That is the right thing to do... I took my kids to a launch years ago. It was an awesome experience to see the shuttle take off. They will never forget it. Dave On 8/25/2010 5:13 PM, Sebastian Kuzminsky wrote: > Heh, no, but i wish i was! The research group I work with has a payload > going up and a bunch of us are going to Cape Canaveral to support the > launch. > > This time i'm bringing my wife and kids to see the launch. Second to > last shuttle launch! > > > > On 08/25/2010 02:44 PM, Belli Button wrote: > >> Are you going with? >> >> >> - Original Message - >> From: "Sebastian Kuzminsky" >> To: "Enhanced Machine Controller (EMC)" >> Sent: Wednesday, August 25, 2010 7:46 PM >> Subject: Re: [Emc-users] Wichita fest >> >> >> >> >>> On 08/18/2010 03:54 PM, Stuart Stevenson wrote: >>> >>> >>>> I have not heard much about an EMC Fest other than the CNC Workshop. I >>>> am >>>> willing to host a meeting here again this year. I just need a week or two >>>> notice. >>>> >>>> >>>> >>> Ooh, ooh, i want to come! >>> >>> Second half of November will probably work best for me, if the STS133 >>> launch doesn't slip. >>> >>> > -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Dave wrote: > That is the right thing to do... I took my kids to a launch years > ago. It was an awesome experience to see the shuttle take off. > I worked at NASA Wallops Island (Eastern shore of Virginia) around 1972-73, and it was quite awesome. I got to assist in the blockhouse during a launch of a satellite (Meteoroid Technology Satellite D) on a Scout D rocket (3-stage, solid fuel). That was quite awesome. I also got to see a lot of exotic stuff being launched. I was about 1000 feet from an exametnet super-Loki datasonde, a 2-stage solid fuel rocket that reaches 100,000 feet in about 6 seconds. It develops 120 G's at launch, and literally disappears while you are looking right at it! That is used for ionospheric research. It coasts to 600,000 feet plus on inertia, then heads back down. I also saw the reference test of a DOE program to gauge the effects of missile nose cones (MIRV reentry vehicles) coming down through heavy ice in cloud tops. The reference test was done in clear air, though. It was just a bright orange dot that swept across the sky. It went from launch to touchdown in the ocean in 19 seconds, covering 20 miles. I also got to ride in the little room just behind the center of a 60' dish used for data acquisition from satellites, etc. The place is all closed now with some kind of Navy research programs, so I couldn't give my kids a tour. Jon -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Ok - I want to schedule the Wichita Fest for Friday 12 Nov 2010 thru however long anyone wants to stay the next week. The shop is working 4 days so we should have Friday, Saturday and Sunday to work on projects without much interruption. We can stay during the next week and work around everyone. Most of the shop thought it was a neat deal last time. I fielded a lot of questions. There are a number of cheap (not 5 star) motels in close proximity. Come for the fun. Bring a project to program, wire and/or machine. Please let me know if you are coming so I can arrange room, electricity, tables, etc. thanks Stuart On Thu, Aug 26, 2010 at 8:21 PM, Jon Elson wrote: > Dave wrote: > > That is the right thing to do... I took my kids to a launch years > > ago. It was an awesome experience to see the shuttle take off. > > > I worked at NASA Wallops Island (Eastern shore of Virginia) around 1972-73, > and it was quite awesome. I got to assist in the blockhouse during a > launch > of a satellite (Meteoroid Technology Satellite D) on a Scout D rocket > (3-stage, > solid fuel). That was quite awesome. I also got to see a lot of exotic > stuff > being launched. I was about 1000 feet from an exametnet super-Loki > datasonde, a 2-stage > solid fuel rocket that reaches 100,000 feet in about 6 seconds. It > develops 120 G's > at launch, and literally disappears while you are looking right at it! > That is used for > ionospheric research. It coasts to 600,000 feet plus on inertia, then > heads back down. > > I also saw the reference test of a DOE program to gauge the effects of > missile nose cones (MIRV reentry vehicles) coming > down through heavy ice in cloud tops. The reference test was done in > clear air, though. It was just a bright orange dot > that swept across the sky. It went from launch to touchdown in the > ocean in 19 seconds, covering 20 miles. > > I also got to ride in the little room just behind the center of a 60' > dish used for data acquisition from > satellites, etc. > > The place is all closed now with some kind of Navy research programs, so > I couldn't give my kids a tour. > > Jon > > > > -- > Sell apps to millions through the Intel(R) Atom(Tm) Developer Program > Be part of this innovative community and reach millions of netbook users > worldwide. Take advantage of special opportunities to increase revenue and > speed time-to-market. Join now, and jumpstart your future. > http://p.sf.net/sfu/intel-atom-d2d > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- dos centavos -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Stuart Stevenson wrote: > Ok - I want to schedule the Wichita Fest for Friday 12 Nov 2010 thru > however long anyone wants to stay the next week. The shop is working 4 days > so we should have Friday, Saturday and Sunday to work on projects without > much interruption. We can stay during the next week and work around > everyone. A long weekend works best for me as I am a one man show in the shop and the date works well > Most of the shop thought it was a neat deal last time. I fielded a lot of > questions. > There are a number of cheap (not 5 star) motels in close proximity. > Come for the fun. Bring a project to program, wire and/or machine. > Please let me know if you are coming so I can arrange room, electricity, > tables, etc. Do you have 240 3Ph available? I can bring a step down if needs be. What I would like to bring is the motors and limit switches to do a rough setup and tune. These are Fanuc red caps and PicoSystems amps to be fitted to a small HMC. The power supply for these is 240V 3Ph input. Anyone near SW Wisconsin want to share a ride? Ed. > thanks > Stuart > -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
The shop power is 480 and 208 from separate entrances. On Fri, Aug 27, 2010 at 6:42 PM, Ed wrote: > Stuart Stevenson wrote: > > Ok - I want to schedule the Wichita Fest for Friday 12 Nov 2010 thru > > however long anyone wants to stay the next week. The shop is working 4 > days > > so we should have Friday, Saturday and Sunday to work on projects without > > much interruption. We can stay during the next week and work around > > everyone. > > > A long weekend works best for me as I am a one man show in the shop and > the date works well > > > > Most of the shop thought it was a neat deal last time. I fielded a lot > of > > questions. > > There are a number of cheap (not 5 star) motels in close proximity. > > Come for the fun. Bring a project to program, wire and/or machine. > > Please let me know if you are coming so I can arrange room, > electricity, > > tables, etc. > > Do you have 240 3Ph available? I can bring a step down if needs be. What > I would like to bring is the motors and limit switches to do a rough > setup and tune. These are Fanuc red caps and PicoSystems amps to be > fitted to a small HMC. The power supply for these is 240V 3Ph input. > > > Anyone near SW Wisconsin want to share a ride? > > > Ed. > > > > thanks > > Stuart > > > > > -- > Sell apps to millions through the Intel(R) Atom(Tm) Developer Program > Be part of this innovative community and reach millions of netbook users > worldwide. Take advantage of special opportunities to increase revenue and > speed time-to-market. Join now, and jumpstart your future. > http://p.sf.net/sfu/intel-atom-d2d > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- dos centavos -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
I've made plans to be in Wichita that weekend. I'll probably arrive late on the 11th and leave in the afternoon on the 15th. I look forward to seeing some fellow emc folk there. Jeff -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Jeff Epler wrote: > I've made plans to be in Wichita that weekend. I'll probably arrive > late on the 11th and leave in the afternoon on the 15th. I look forward > to seeing some fellow emc folk there. > Of course, immediately after advising Stuart that mid-November was fine for me, my boss said there'd be a meeting in Texas about that time. Well, there's a good chance the Texas meeting will actually have to be moved to a different time, I'm hoping so. So, Stuart, how is the weather there in mid-November? I'd hate to have to slog through a foot of snow in a low-slung Honda Civic. Jon -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Texas meeting? On Aug 31, 2010 8:24 PM, "Jon Elson" wrote: Jeff Epler wrote: > I've made plans to be in Wichita that weekend. I'll probably arrive > late on t... Of course, immediately after advising Stuart that mid-November was fine for me, my boss said there'd be a meeting in Texas about that time. Well, there's a good chance the Texas meeting will actually have to be moved to a different time, I'm hoping so. So, Stuart, how is the weather there in mid-November? I'd hate to have to slog through a foot of snow in a low-slung Honda Civic. Jon -- This SF.net Dev2Dev ... -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Jon, If there can be normal weather in Kansas it is not usually heavy snow. It 'normally' is cold and cloudy and rainy during November. Ice is more likely than snow. It will be good to see the EMC2 people again. I have been having the EMC2 DT's. Stuart On Tue, Aug 31, 2010 at 8:19 PM, Jon Elson wrote: > Jeff Epler wrote: > > I've made plans to be in Wichita that weekend. I'll probably arrive > > late on the 11th and leave in the afternoon on the 15th. I look forward > > to seeing some fellow emc folk there. > > > Of course, immediately after advising Stuart that mid-November was fine > for me, > my boss said there'd be a meeting in Texas about that time. Well, > there's a good chance > the Texas meeting will actually have to be moved to a different time, > I'm hoping so. > So, Stuart, how is the weather there in mid-November? I'd hate to have > to slog > through a foot of snow in a low-slung Honda Civic. > > Jon > > > -- > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- dos centavos -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
On Tue, Aug 31, 2010 at 8:25 PM, Daniel Goller wrote: > Texas meeting? > > Dan, My wife is from Texas so I realize the people of Texas consider Texas the only place to be. I will acknowledge Texas is close to heaven - just on the other side of Oklahoma from it. What part of Texas are you from? I was in Dallas three weeks ago and two weeks ago I was in Laredo. I used to say "The best thing to come out of Texas is I-35 North". I married a Texas girl so I can't say that anymore. Kansas is not the end of the world - but you can see it from here. :) It would be difficult for me to organize a Texas meeting so I will stick with Wichita, Kansas meetings. Stuart > > > -- > This SF.net Dev2Dev ... > > -- > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- dos centavos -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Jon just triggered a reflex there :) Living in San Antonio, working by Seguin. On Tue, Aug 31, 2010 at 10:09 PM, Stuart Stevenson wrote: > On Tue, Aug 31, 2010 at 8:25 PM, Daniel Goller wrote: > >> Texas meeting? >> >> Dan, > My wife is from Texas so I realize the people of Texas consider Texas the > only place to be. I will acknowledge Texas is close to heaven - just on the > other side of Oklahoma from it. > What part of Texas are you from? I was in Dallas three weeks ago and two > weeks ago I was in Laredo. > I used to say "The best thing to come out of Texas is I-35 North". I > married a Texas girl so I can't say that anymore. > Kansas is not the end of the world - but you can see it from here. :) > It would be difficult for me to organize a Texas meeting so I will stick > with Wichita, Kansas meetings. > Stuart > >> >> >> -- >> This SF.net Dev2Dev ... >> >> -- >> This SF.net Dev2Dev email is sponsored by: >> >> Show off your parallel programming skills. >> Enter the Intel(R) Threading Challenge 2010. >> http://p.sf.net/sfu/intel-thread-sfd >> ___ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > > -- > dos centavos > -- > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Daniel Goller wrote: > Texas meeting? > This is for my work, has nothing to do with CNC, but I guess November in College Station TX is better than July there! Jon -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
You would like July if you spent your August here ;) On Aug 31, 2010 11:27 PM, "Jon Elson" wrote: Daniel Goller wrote: > Texas meeting? > This is for my work, has nothing to do with CNC, but I guess November in College Station TX is better than July there! Jon -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Int... -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
On 01/09/2010 04:09, Stuart Stevenson wrote: > I will acknowledge Texas is close to heaven - just on the > other side of Oklahoma from it. How the h*ll did heaven get moved to the States? I thought we had it safely bottled up and under wraps here in Yorkshire!! Are you sure someone didn't sell you a fake?? ;-D Ian Ian W. Wright Sheffield UK -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
On 1 September 2010 09:01, Ian W. Wright wrote: > How the h*ll did heaven get moved to the States? I thought > we had it safely bottled up and under wraps here in > Yorkshire!! Shhh! We sold them a bit of Lancashire we didn't want any more, don't give the game away now! -- atp -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
Well, I'll be there. I should arrive late on the 11th, and leave mid-day on the 16th. See you then - Steve Stuart Stevenson wrote: > Jon, >If there can be normal weather in Kansas it is not usually heavy snow. It > 'normally' is cold and cloudy and rainy during November. Ice is more likely > than snow. >It will be good to see the EMC2 people again. I have been having the EMC2 > DT's. > Stuart > -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Wichita fest
On Thu, Aug 26, 2010 at 08:56:51PM -0500, Stuart Stevenson wrote: > Ok - I want to schedule the Wichita Fest for Friday 12 Nov 2010 thru > however long anyone wants to stay the next week. This will be fun! I will be there Thursday night. -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
