RE: Changing IP of Exchange Server Breaks MTA
H. I had something similar but it had nothing to do with the IP address. It had to do with the Recipient Policies. We had 2 servers, say a.company.com b.company.com. The Default Recipient Policy had an SMTP address of a.company.com from when we only had 1 server. We had to remove that and just leave @company.com as possible email addresses.it was causing a looping problem. I don't think that's your problem but here's my 2 cents. T -Original Message- From: Erik Vesneski [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 16, 2002 12:55 AM To: Exchange Discussions Subject: RE: Changing IP of Exchange Server Breaks MTA Hi, Well this again was done tonight and it did not fix the issue. I recalculated on the two servers that were changed and then on the two servers that were not changed at the Site Level. With this I am forced to call MS PSS due to time contraints. Does anyone else have an idea? Erik L. Vesneski www.epicentric.com -Original Message- From: Tony Hlabse [mailto:[EMAIL PROTECTED]] Sent: Monday, April 15, 2002 7:31 AM To: Exchange Discussions Subject: Re: Changing IP of Exchange Server Breaks MTA Yes recalculate. Your qwart files are still the old ones. - Original Message - From: Erik Vesneski [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, April 15, 2002 10:35 AM Subject: Changing IP of Exchange Server Breaks MTA Hi, A week ago we moved two of our 4 Exchange servers over to a private IP due to a network redesign. All 4 Exchange servers sit behind a bridgehead and the other two are private IP's already. Exchange Arch: Inbound email to our domain comes into a SMTP bridgehead which delivers directly to the Exchange server. Outbound email from the Exchange servers are directly sent to the bridgehead and send out to the Internet. Exchange 5.5 with SP4. All same site and org. These two Exchange 5.5 SP4 servers (After the re-ip) could receive inbound email and send email within the enterprise to other Exchange servers and recipients. When we sent an email outbound to another domain it failed with the following: --- Your message did not reach some or all of the intended recipients. Subject: test from internal Sent: 4/10/2002 10:26 PM The following recipient(s) could not be reached: '[EMAIL PROTECTED]' on 4/10/2002 10:26 PM The recipient name is not recognized The MTS-ID of the original message is: c=US;a= ;p=Epicentric;l=SPEAR-020411052540Z-40 --- This is my personal email account and it failed each time to this and other email accounts. On the other hand, email from this external account to my work email address succeeded. I looked at the Event Logs and there was nothing on both servers after observing these issues. Myself and the Sys Admin installed SP4 and rebooted after this break. Due to the high nature of these servers we rolled back and were able to start emailing outbound again. I have looked at the following articles after this experience: Q133403--seems best for our situation Q193321 Q191014 The 'Site Addressing Properties' has the following info for each server: Type: Value: Cost: Connector: SMTP *; 1 Internet Mail Service (Spear) SMTP *; 1 Internet Mail Service (Lombard) SMTP *; 1 Internet Mail Service (Presidio) SMTP *; 1 Internet Mail Service (Lasalle) My question(s) is/are: -Should we recalculate routing on the two servers after the ip change or before? -Has anyone else had this issue and if so what did you do to resolve it? Thank you, Erik L. Vesneski Epicentric, Inc. _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
E2K, SP2 and Backup Exec 8.6 Problems
I'm having a weird problem that I can't seem to track down. When I attempt to backup my E2K, SP2 (native mode) servers using BE 8.6 (latest revision), the BE job engine service will just stop and sometimes the logs state that there's a corrupt message in a particular mailbox. However, here's the kicker.I can backup the supposedly corrupt mailbox individually, but not in selected group of mailboxes. Also, per MS suggestion, we've done the following: (1) The error messages that resulting from eseutil isinteg stating that there was a Jet_ERR messagea problem w/the store. (2) So, we created a 2nd mailbox store. Painfully moved all the mailboxes to the 2nd store. Painful because some of the mailboxes woulnd't move...had MAPI errors. So, after an exmerge, we deleted the mailboxes; ran clean-up agen; re-created them then re-imported them. (3) Ran isinteg -s servername -fix -t path -tests alltests --- everything reports 0 errors 0 fixes. (4) Ran BE still get the same problemit just hangs on different mailboxes and it's not consistent because if hangs on mailbox 'c' I can rerun BE mailbox 'c' will get backed up but then it will 'hang' on mailbox j. Anyone have any suggestions? I'm thinking of dropping back to BE 8.5 but I can't figure out if I'm having mailbox corruption, store corruption or what? NTOE: With MS tech support, re ran just a plan NT Backup verified that we could backup the IS we can backup the store using BEjust not individual mailboxes. Terry _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
SOLVED: Browsing an AD Win2K Domain + Scanmail for E2k
This is one for the books it was never Scanmail. Apparently OfficeScan by Trendmicro is the product that effects browsing. Anyway, the real problem solution: I am using a tool, namely Scriptlogic, for various things. One such task was to automatically fill the comment or srvcomment field on all machines so we could automatically know the owner of the machine. Check out: http://www.scriptlogic.com/support/teknotes/s1076.asp Well, it appears that using this script on Win2k SERVERS broke browsing. I don't know why. It works fine on workstations. To resolve the issue I ran the following from the command line: (1) net config server /srvcomment:machinename where I put the name of each server in for machinename. (2) Since I was running WINS, I also ran 'nbtstat -R' to clear everything (3) Then 'nbtstat -RR' Sometimes it takes a little while (more than 40 mins sometimes) but eventually everthing populates browsing worked again. Unfortunately, it has taken almost 3 weeks to discover this while working w/MS techsupport. Terry -Original Message- From: Terry Lee [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 06, 2002 4:01 PM To: Exchange Discussions Subject: Browsing an AD Win2K Domain + Scanmail for E2k Hi folks, Let me say up front that I wasn't sure whether to post to both groups but the issue involves Win2k Exchange servers. So, please pardon me if it offends anyone. My team recently rebuilt our 2 multi-master, NT4 into a single AD Win2k domain. We were able to browse when we were in test modeeven with 1 E2K server running. Once we added the latest version of Trend Micro's Scanmail and E-manager to the mix but we actually didn't notice it at first. Browsing thru AD's Users Computers works fine. However, when you use the old browse entire network look at it from an NT/Win9x point of view, the only machines that are listed are DHCP clients (servers or workstations) and the 2 E2K (native mode, member servers).not even the PDC Emulater/master browser. I have been working this issue w/Trend MS for more than a week it's still not resolved. MS states that a Scanmail is the issue but that the problem hasn't been made public yet. Trend doesn't seem to have a clue. Does anyone else have any clues? Other info: * Two physical sites. * An AD DC that serves as the GC (global catalog) in both sites * A WINs server in each siteboth member servers..replicating to each other using AD. Wins has been check, re-checked triple checked. * A DNS server in each site...both member servers * Domain is native mode although we had the same problem in mixed mode. * All servers are running SP2 including E2K w/SP2. * The PDC doesn't see all the servers, so no clients will either. The only time I can remember that we could browse all the servers is when my Exchange servers weren't online. Any help is appreciated. T .+-¦-xm¶ÿà ,Â)Ür¿ë(º· ýì\ öªÙÈb½ë!¶Úÿ 0³ §ÊþÈzÇȱæ«r¬¥:.˱Êâmé[hæ¯yì\ ©àz[,Ã)ärÅÈZËZvh§+-iÙ¢Ì2G(
Browsing an AD Win2K Domain + Scanmail for E2k
Hi folks, Let me say up front that I wasn't sure whether to post to both groups but the issue involves Win2k Exchange servers. So, please pardon me if it offends anyone. My team recently rebuilt our 2 multi-master, NT4 into a single AD Win2k domain. We were able to browse when we were in test modeeven with 1 E2K server running. Once we added the latest version of Trend Micro's Scanmail and E-manager to the mix but we actually didn't notice it at first. Browsing thru AD's Users Computers works fine. However, when you use the old browse entire network look at it from an NT/Win9x point of view, the only machines that are listed are DHCP clients (servers or workstations) and the 2 E2K (native mode, member servers).not even the PDC Emulater/master browser. I have been working this issue w/Trend MS for more than a week it's still not resolved. MS states that a Scanmail is the issue but that the problem hasn't been made public yet. Trend doesn't seem to have a clue. Does anyone else have any clues? Other info: * Two physical sites. * An AD DC that serves as the GC (global catalog) in both sites * A WINs server in each siteboth member servers..replicating to each other using AD. Wins has been check, re-checked triple checked. * A DNS server in each site...both member servers * Domain is native mode although we had the same problem in mixed mode. * All servers are running SP2 including E2K w/SP2. * The PDC doesn't see all the servers, so no clients will either. The only time I can remember that we could browse all the servers is when my Exchange servers weren't online. Any help is appreciated. T _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Browsing an AD Win2K Domain + Scanmail for E2k
Supposedly, having some server-based antivirus programs can cause browsing not to function properly. I don't know but I'm going to shut down my mail servers in the wee hours of the am start the services slowly to see what happens. I just know I'm sick of this need it working. T -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 06, 2002 5:21 PM To: Exchange Discussions Subject: RE: Browsing an AD Win2K Domain + Scanmail for E2k Ask them why Scanmail is the issue. That makes absolutely no sense to me. You're having a browsing problem, so maybe you have more than one master browser on the network. Start examining the event logs for Browser service errors. Ed Crowley MCSE+Internet MVP kcCC+I Tech Consultant Compaq Computer Corporation Protecting the world from PSTs and Bricked Backups! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Terry Lee Sent: Wednesday, February 06, 2002 2:01 PM To: Exchange Discussions Subject: Browsing an AD Win2K Domain + Scanmail for E2k Hi folks, Let me say up front that I wasn't sure whether to post to both groups but the issue involves Win2k Exchange servers. So, please pardon me if it offends anyone. My team recently rebuilt our 2 multi-master, NT4 into a single AD Win2k domain. We were able to browse when we were in test modeeven with 1 E2K server running. Once we added the latest version of Trend Micro's Scanmail and E-manager to the mix but we actually didn't notice it at first. Browsing thru AD's Users Computers works fine. However, when you use the old browse entire network look at it from an NT/Win9x point of view, the only machines that are listed are DHCP clients (servers or workstations) and the 2 E2K (native mode, member servers).not even the PDC Emulater/master browser. I have been working this issue w/Trend MS for more than a week it's still not resolved. MS states that a Scanmail is the issue but that the problem hasn't been made public yet. Trend doesn't seem to have a clue. Does anyone else have any clues? Other info: * Two physical sites. * An AD DC that serves as the GC (global catalog) in both sites * A WINs server in each siteboth member servers..replicating to each other using AD. Wins has been check, re-checked triple checked. * A DNS server in each site...both member servers * Domain is native mode although we had the same problem in mixed mode. * All servers are running SP2 including E2K w/SP2. * The PDC doesn't see all the servers, so no clients will either. The only time I can remember that we could browse all the servers is when my Exchange servers weren't online. Any help is appreciated. T _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Trend Micro eManager 5.1 for E2K
I've used it but I would hope that we would talk online so that everyone on the list could benefit. What would you like to know? Terry -Original Message- From: Steve Iadarola [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 06, 2002 5:04 PM To: Exchange Discussions Subject: Trend Micro eManager 5.1 for E2K Can someone that is farmiliar with this product please contact me off list? TIA, Steve I _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
How to setup multiple E2k Servers? -- Bounced Messages
My org recently migrated from a 2-site, 1 Exchange 5.5 Org to E2K w/TWO exchange servers that are in 2 physical locations. Previously, I had 1 E55 server that had the single Internet Mail Server while the 2nd server got mail replicated to it. Now, we have the 2 E2k servers w/2 SMTP virtual servers w/1 SMTP connector. We can send mail externally from both servers and receive external email but we cannot send mail to each other. We're getting bouncing mail between two servers. Can someone help with this...I'm not sure if I need a routing group or my bridgehead servers are wrong or what. NOTE: The servers are physically separated by routers but they serve the same domain, example: abc.com Any clues? Terry _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Need tool to delete specific emails/attachments
Is there a tool that will allow me to delete specific emails/attachments that are already stored in my users mailbox? I have inherited a mail system I would like the ability to delete messages that contain .vbs, mp3, .com or .exe's. My scanner doesn't allow them in (now) but it doesn't do anything for messages ALREADY in the store. Environment: Exchange 5.5, SP4 on NT4, SP6a. Terry _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
