defrag error
So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas company. Warning: Although precautions have been taken to make sure no viruses are present in this email, the company cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.png
Exchange 2007 Message Tracking
I have an email coming from a vendor that is reaching our Edge Transport Server. However, I'm not sure what happens to it after that. When I check Message Tracking, I do have a RECEIVE EventID, but there is no SENT EventID. Checking the logs, I do see an ,,AGENT,FAIL, [EMAIL PROTECTED], [EMAIL PROTECTED];,[EMAIL PROTECTED],1,Content Filter Agent,OnEndOfData,AcceptMessage,,SCL,0, [EMAIL PROTECTED],5328482,1,,,FW: 2009 Benefit Enrollment, [EMAIL PROTECTED], [EMAIL PROTECTED],00A: 2008-11-13T01:45:34.250Z,,Edge Transport Server,,,FSE Routing Agent,,AGENT,FAIL,1724393,,[EMAIL PROTECTED],,0,1, [EMAIL PROTECTED], [EMAIL PROTECTED],,4260156,1,,,FW: 2009 Benefit Enrollment, [EMAIL PROTECTED], [EMAIL PROTECTED],00A: 2008-11-13T13:58:25.593Z,97.65.38.110,,Edge transport Server,08CB125E4B474167;2008-11-13T13:58:09.781Z;0,Edge Transport Server\Default internal receive connector 2008-11-13T13:58:28.625Z,,Edge Transport Server,,,FSE Routing Agent,,AGENT,FAIL,1726631,,[EMAIL PROTECTED],,0,1, [EMAIL PROTECTED], 2008-11-13T13:58:32.484Z,198.234.129.7,,Edge Transport Server,08CB125E4B47416A;2008-11-13T13:58:14.468Z;0,Edge Transport Server\Default internal receive connector Does anybody have any idea where this email may have gone? Thanks. ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
Full OWA client, not IE
Does anyone know if there has been mention of Microsoft ever supporting the full-blown OWA client for alternative browsers? Angie ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Full OWA client, not IE
I guess never say never, but don't hold your breath. A very good explanation from one of the OWA 'light' developers on the bottom of this page. http://msexchangeteam.com/archive/2006/09/13/428901.aspx From: Angie Urtel [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 12:28 PM To: MS-Exchange Admin Issues Subject: Full OWA client, not IE Does anyone know if there has been mention of Microsoft ever supporting the full-blown OWA client for alternative browsers? Angie ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Public Folder/Favorites
Before you go to the trouble of creating a new profile, I would try using the .../cleanviews switch for Outlook. http://office.microsoft.com/en-us/outlook/HP010031101033.aspx Nikki From: Bill Lambert [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 12, 2008 8:26 AM To: MS-Exchange Admin Issues Subject: RE: Public Folder/Favorites Thanks, Carl. I hadn't thought of a new profile and that's definitely worth a shot. Yea, fully patched up on Exchange and Outlook clients...except for what came out overnight. Bill Lambert Concuity 847-941-9206 From: Carl Houseman [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 11, 2008 6:39 PM To: MS-Exchange Admin Issues Subject: RE: Public Folder/Favorites Are we fully service-packed? Try a new mail profile. Carl From: Bill Lambert [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 11, 2008 7:39 PM To: MS-Exchange Admin Issues Subject: Public Folder/Favorites Hello all... I have a fully patched Outlook 2007 user that has this problem: She wants to view a public folder calendar in her Outlook calendar view so she can see both her calendar and the one from the public folder in the same window. So, she right clicks the public folder, says Add to Favorites. But when she goes to the calendar view, the public folder calendar doesn't show up. This only happens to this user...others have no problem. I've gone over her settings and the public folder settings and googled my butt off but can't find a solution. Have any of you seen this and/or know a solution? It's making me crazy!! Thanks in advance for any advice/help. Bill Lambert Windows System Administrator Concuity A healthcare division of Trintech, Inc. Phone 847-941-9206 Fax 847-465-9147 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.gif
RE: Public Folder/Favorites
Thanks, Nikkivery useful information! Bill Lambert Concuity 847-941-9206 From: Nikki Peterson - OETX [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 12:17 PM To: MS-Exchange Admin Issues Subject: RE: Public Folder/Favorites Before you go to the trouble of creating a new profile, I would try using the .../cleanviews switch for Outlook. http://office.microsoft.com/en-us/outlook/HP010031101033.aspx Nikki From: Bill Lambert [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 12, 2008 8:26 AM To: MS-Exchange Admin Issues Subject: RE: Public Folder/Favorites Thanks, Carl. I hadn't thought of a new profile and that's definitely worth a shot. Yea, fully patched up on Exchange and Outlook clients...except for what came out overnight. Bill Lambert Concuity 847-941-9206 From: Carl Houseman [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 11, 2008 6:39 PM To: MS-Exchange Admin Issues Subject: RE: Public Folder/Favorites Are we fully service-packed? Try a new mail profile. Carl From: Bill Lambert [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 11, 2008 7:39 PM To: MS-Exchange Admin Issues Subject: Public Folder/Favorites Hello all... I have a fully patched Outlook 2007 user that has this problem: She wants to view a public folder calendar in her Outlook calendar view so she can see both her calendar and the one from the public folder in the same window. So, she right clicks the public folder, says Add to Favorites. But when she goes to the calendar view, the public folder calendar doesn't show up. This only happens to this user...others have no problem. I've gone over her settings and the public folder settings and googled my butt off but can't find a solution. Have any of you seen this and/or know a solution? It's making me crazy!! Thanks in advance for any advice/help. Bill Lambert Windows System Administrator Concuity A healthcare division of Trintech, Inc. Phone 847-941-9206 Fax 847-465-9147 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.gif
Recover Deleted items not working
Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: defrag error
Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas company. Warning: Although precautions have been taken to make sure no viruses are present in this email, the company cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.png
RE: Recover Deleted items not working
DumpsterAlwaysOn is a reg setting for client machines and affects Outlook behavior. Enable it, restart Outlook, then try to recover something from a folder other than Deleted Items. You should see the items that were shift+deleted. Carl From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? _ From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. _ From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
You need the DumpsterAlwaysOn reg key on the client computer, not the server. Once the client has that setting it can recover the items that were shift deleted from any folder in the mailbox. Thanks, Peter Dahl. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED]mailto:[EMAIL PROTECTED] 937-494-2559 This communication is confidential and may be legally privileged. If you are not the intended recipient, (i) please do not read or disclose to others, (ii) please notify the sender by reply mail, and (iii) please delete this communication from your system. Failure to follow this process may be unlawful. Thank you for your cooperation. ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
You just need to enable this reg hack on a client that has outlook installed. Then, that client can recover deleted items from ANY folder, even those that were shift-deleted. Also, if you enable this reg hack today, you will still be able go back 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: defrag error
I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ***Teletronics Technology Corporation*** This e-mail is confidential and may also be privileged. If you are not the addressee or authorized by the addressee to receive this e-mail, you may not disclose, copy, distribute, or use this e-mail. If you have received this e-mail in error, please notify the sender immediately by reply e-mail or by telephone at 267-352-2020 and destroy this message and any copies. Thank you. *** ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.png
RE: Recover Deleted items not working
One other thing... The nice thing about the reg hack is that if you have permissions to other mailboxes, just enable it on your PC. Then, you can open other mailboxes in your Outlook (Toolsemail accountsnextchangemore settingsadvancedadd) and recover people's deleted items for them. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:51 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You just need to enable this reg hack on a client that has outlook installed. Then, that client can recover deleted items from ANY folder, even those that were shift-deleted. Also, if you enable this reg hack today, you will still be able go back 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
Re: defrag error
And be sure you're using the same version of eseutil as your Exchange store was last mounted with... On 11/13/08, Jake Gardner [EMAIL PROTECTED] wrote: I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ***Teletronics Technology Corporation*** This e-mail is confidential and may also be privileged. If you are not the addressee or authorized by the addressee to receive this e-mail, you may not disclose, copy, distribute, or use this e-mail. If you have received this e-mail in error, please notify the sender immediately by reply e-mail or by telephone at 267-352-2020 and destroy this message and any copies. Thank you. *** ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~ -- Sent from my mobile device ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: defrag error
Googl'ing exchange defrag error 1808 came up with some info. Don Guyer Systems Engineer Information Services Prudential Fox Roach/ Trident 431 W. Lancaster Avenue Devon, PA 19333 Ph: (610) 993-3299 Fax: (610) 650-5306 www.prufoxroach.com blocked::blocked::http://www.prufoxroach.com/ [EMAIL PROTECTED] From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. /pre table width=100%trtd class=body This email and any files transmitted with it are confidentialbr and intended solely for the use of the individual or entity tobr whom they are addressed. It may contain information protected by br state and federal privacy and intellectual property laws.br If you have received this email in error pleasebr notify the sender immediately and delete this e-mail frombr your system. If you are not the named addressee you shouldbr not disseminate, distribute or copy this e-mail, and you arebr notified that disclosing, copying, distributing or taking anybr action in reliance on the contents of this information is strictly prohibited.br /td/tr/table ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.png
Re: defrag error
I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardner To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 -- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped...HELP..SOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space.ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command.and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ***Teletronics Technology Corporation*** This e-mail is confidential and may also be privileged. If you are not the addressee or authorized by the addressee to receive this e-mail, you may not disclose, copy, distribute, or use this e-mail. If you have received this e-mail in error, please notify the sender immediately by reply e-mail or by telephone at 267-352-2020 and destroy this message and any copies. Thank you. *** ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.png
RE: Recover Deleted items not working
Then I don't know. You'll have to open a CTEL call and we'll get somebody to try and diagnose it. From: Dahl, Peter [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 2:46 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You need the DumpsterAlwaysOn reg key on the client computer, not the server. Once the client has that setting it can recover the items that were shift deleted from any folder in the mailbox. Thanks, Peter Dahl. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED]mailto:[EMAIL PROTECTED] 937-494-2559 DISCLAIMER: This communication is confidential and may be legally privileged. If you are not the intended recipient, (i) please do not read or disclose to others, (ii) please notify the sender by reply mail, and (iii) please delete this communication from your system. Failure to follow this process may be unlawful. Thank you for your cooperation. ** Note: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. ** ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
Ignore that. Replied to the wrong email. From: Campbell, Rob [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:15 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working Then I don't know. You'll have to open a CTEL call and we'll get somebody to try and diagnose it. From: Dahl, Peter [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 2:46 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You need the DumpsterAlwaysOn reg key on the client computer, not the server. Once the client has that setting it can recover the items that were shift deleted from any folder in the mailbox. Thanks, Peter Dahl. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED]mailto:[EMAIL PROTECTED] 937-494-2559 DISCLAIMER: This communication is confidential and may be legally privileged. If you are not the intended recipient, (i) please do not read or disclose to others, (ii) please notify the sender by reply mail, and (iii) please delete this communication from your system. Failure to follow this process may be unlawful. Thank you for your cooperation. ** Note: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. ** ** Note: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. ** ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
It appears that I have a strange thing going on with this. I am not able see anything in the Recover Deleted Items section when I delete an e-mail out of the deleted items or do the SHIFT+delete on an e-mail. I do have the reg key applied to my client PC and have restarted outlook and also restarted my PC. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:56 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working One other thing... The nice thing about the reg hack is that if you have permissions to other mailboxes, just enable it on your PC. Then, you can open other mailboxes in your Outlook (Toolsemail accountsnextchangemore settingsadvancedadd) and recover people's deleted items for them. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:51 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You just need to enable this reg hack on a client that has outlook installed. Then, that client can recover deleted items from ANY folder, even those that were shift-deleted. Also, if you enable this reg hack today, you will still be able go back 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
Outlook 2003? From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 4:21 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working It appears that I have a strange thing going on with this. I am not able see anything in the Recover Deleted Items section when I delete an e-mail out of the deleted items or do the SHIFT+delete on an e-mail. I do have the reg key applied to my client PC and have restarted outlook and also restarted my PC. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:56 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working One other thing... The nice thing about the reg hack is that if you have permissions to other mailboxes, just enable it on your PC. Then, you can open other mailboxes in your Outlook (Toolsemail accountsnextchangemore settingsadvancedadd) and recover people's deleted items for them. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:51 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You just need to enable this reg hack on a client that has outlook installed. Then, that client can recover deleted items from ANY folder, even those that were shift-deleted. Also, if you enable this reg hack today, you will still be able go back 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: defrag error
Ok, so I'm copying to the folder out to the external drive...this sucks!@ but I'm going to sit back and wait and see what occurs. Thanks for everyone's assistance. Thomas From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:08 PM To: MS-Exchange Admin Issues Subject: Re: defrag error I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardner mailto:[EMAIL PROTECTED] To: MS-Exchange Admin Issues mailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ***Teletronics Technology Corporation*** This e-mail is confidential and may also be privileged. If you are not the addressee or authorized by the addressee to receive this e-mail, you may not disclose, copy, distribute, or use this e-mail. If you have received this e-mail in error, please notify the sender immediately by reply e-mail or by telephone at 267-352-2020 and destroy this message and any copies. Thank you. *** This email and any attached files are confidential and intended solely for the intended
RE: Recover Deleted items not working
Right-click on your first storage group Properties Limits Should look like this... From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 4:21 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working It appears that I have a strange thing going on with this. I am not able see anything in the Recover Deleted Items section when I delete an e-mail out of the deleted items or do the SHIFT+delete on an e-mail. I do have the reg key applied to my client PC and have restarted outlook and also restarted my PC. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:56 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working One other thing... The nice thing about the reg hack is that if you have permissions to other mailboxes, just enable it on your PC. Then, you can open other mailboxes in your Outlook (Toolsemail accountsnextchangemore settingsadvancedadd) and recover people's deleted items for them. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:51 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You just need to enable this reg hack on a client that has outlook installed. Then, that client can recover deleted items from ANY folder, even those that were shift-deleted. Also, if you enable this reg hack today, you will still be able go back 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~Outlook.jpg
** PLEASE REMOVE **
This address: [EMAIL PROTECTED] I get NDRs from them everytime I post. Thanks ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Recover Deleted items not working
Ok, I do not have the bottom option checked. I will check that option and I assume that I have to restart the exchange services for this to take effect? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 4:28 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working Right-click on your first storage group Properties Limits Should look like this... From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 4:21 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working It appears that I have a strange thing going on with this. I am not able see anything in the Recover Deleted Items section when I delete an e-mail out of the deleted items or do the SHIFT+delete on an e-mail. I do have the reg key applied to my client PC and have restarted outlook and also restarted my PC. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:56 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working One other thing... The nice thing about the reg hack is that if you have permissions to other mailboxes, just enable it on your PC. Then, you can open other mailboxes in your Outlook (Toolsemail accountsnextchangemore settingsadvancedadd) and recover people's deleted items for them. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:51 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You just need to enable this reg hack on a client that has outlook installed. Then, that client can recover deleted items from ANY folder, even those that were shift-deleted. Also, if you enable this reg hack today, you will still be able go back 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~Outlook.jpg
Re: defrag error
How big is the store? - Original Message - From: [EMAIL PROTECTED] To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 1:27 PM Subject: RE: defrag error Ok, so I'm copying to the folder out to the external drive.this sucks!@ but I'm going to sit back and wait and see what occurs. Thanks for everyone's assistance. Thomas From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:08 PM To: MS-Exchange Admin Issues Subject: Re: defrag error I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardner To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped...HELP..SOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space.ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command.and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ***Teletronics Technology Corporation*** This e-mail is confidential and may also be privileged. If you are not the addressee or authorized by the addressee to receive this e-mail, you may not disclose, copy, distribute, or use this e-mail. If you have received this e-mail in error, please notify the sender immediately by reply e-mail or by telephone at 267-352-2020 and destroy this message and any copies. Thank you. *** This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this
Re: ** PLEASE REMOVE **
** PLEASE REMOVE **So does everybody. Make a rule. =) - Original Message - From: David Mazzaccaro To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 1:31 PM Subject: ** PLEASE REMOVE ** This address: [EMAIL PROTECTED] I get NDRs from them everytime I post. Thanks ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: defrag error
That's an awfully personal question. I hope you at least bought him dinner. :-P TVK From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:41 PM To: MS-Exchange Admin Issues Subject: Re: defrag error How big is the store? - Original Message - From: [EMAIL PROTECTED]mailto:[EMAIL PROTECTED] To: MS-Exchange Admin Issuesmailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 1:27 PM Subject: RE: defrag error Ok, so I'm copying to the folder out to the external drive...this sucks!@ but I'm going to sit back and wait and see what occurs. Thanks for everyone's assistance. Thomas From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:08 PM To: MS-Exchange Admin Issues Subject: Re: defrag error I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardnermailto:[EMAIL PROTECTED] To: MS-Exchange Admin Issuesmailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED]mailto:[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: [cid:image001.png@01C945A6.B9ED15A0] I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ***Teletronics Technology Corporation*** This e-mail is confidential and may also be privileged. If you are not the addressee or authorized by the addressee to receive this e-mail, you may not disclose, copy, distribute, or use this e-mail. If you have received this e-mail in error, please notify the sender immediately by reply e-mail or by telephone at 267-352-2020 and destroy this message and any copies. Thank you. *** This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although
Re: defrag error
Naw just a little girlscout kiss... =) - Original Message - From: Tim Vander Kooi To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 1:44 PM Subject: RE: defrag error That's an awfully personal question. I hope you at least bought him dinner. :-P TVK From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:41 PM To: MS-Exchange Admin Issues Subject: Re: defrag error How big is the store? - Original Message - From: [EMAIL PROTECTED] To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 1:27 PM Subject: RE: defrag error Ok, so I'm copying to the folder out to the external drive.this sucks!@ but I'm going to sit back and wait and see what occurs. Thanks for everyone's assistance. Thomas From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:08 PM To: MS-Exchange Admin Issues Subject: Re: defrag error I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardner To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 -- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped...HELP..SOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space.ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command.and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ***Teletronics Technology Corporation*** This e-mail is confidential and may also be
RE: defrag error
17 gig with a stream of 35 megs From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:41 PM To: MS-Exchange Admin Issues Subject: Re: defrag error How big is the store? - Original Message - From: [EMAIL PROTECTED] To: MS-Exchange Admin Issues mailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 1:27 PM Subject: RE: defrag error Ok, so I'm copying to the folder out to the external drive...this sucks!@ but I'm going to sit back and wait and see what occurs. Thanks for everyone's assistance. Thomas From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:08 PM To: MS-Exchange Admin Issues Subject: Re: defrag error I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardner mailto:[EMAIL PROTECTED] To: MS-Exchange Admin Issues mailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended
RE: defrag error
Thanks Matt ;) From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:46 PM To: MS-Exchange Admin Issues Subject: Re: defrag error Naw just a little girlscout kiss... =) - Original Message - From: Tim Vander Kooi mailto:[EMAIL PROTECTED] To: MS-Exchange Admin Issues mailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 1:44 PM Subject: RE: defrag error That's an awfully personal question. I hope you at least bought him dinner. :-P TVK From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:41 PM To: MS-Exchange Admin Issues Subject: Re: defrag error How big is the store? - Original Message - From: [EMAIL PROTECTED] To: MS-Exchange Admin Issues mailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 1:27 PM Subject: RE: defrag error Ok, so I'm copying to the folder out to the external drive...this sucks!@ but I'm going to sit back and wait and see what occurs. Thanks for everyone's assistance. Thomas From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:08 PM To: MS-Exchange Admin Issues Subject: Re: defrag error I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardner mailto:[EMAIL PROTECTED] To: MS-Exchange Admin Issues mailto:exchangelist@lyris.sunbelt-software.com Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped.HELPSOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space...ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command...and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode...
RE: Recover Deleted items not working
not sure about the reboot... but probably. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 4:38 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working Ok, I do not have the bottom option checked. I will check that option and I assume that I have to restart the exchange services for this to take effect? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 4:28 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working Right-click on your first storage group Properties Limits Should look like this... From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 4:21 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working It appears that I have a strange thing going on with this. I am not able see anything in the Recover Deleted Items section when I delete an e-mail out of the deleted items or do the SHIFT+delete on an e-mail. I do have the reg key applied to my client PC and have restarted outlook and also restarted my PC. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:56 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working One other thing... The nice thing about the reg hack is that if you have permissions to other mailboxes, just enable it on your PC. Then, you can open other mailboxes in your Outlook (Toolsemail accountsnextchangemore settingsadvancedadd) and recover people's deleted items for them. From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:51 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working You just need to enable this reg hack on a client that has outlook installed. Then, that client can recover deleted items from ANY folder, even those that were shift-deleted. Also, if you enable this reg hack today, you will still be able go back 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:30 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working I would like to have the recover deleted items to be able to retain e-mails for 7 days that were deleted using SHIFT+delete. I am assuming the reg key would fix that? I am assuming the reg key needs to be added to the server in order to make this work? From: David Mazzaccaro [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:27 PM To: MS-Exchange Admin Issues Subject: RE: Recover Deleted items not working The recover deleted items only works on items that were in the deleted items folder. (Unless you have the reg key on) So you have to open the deleted items folder, then click on recover deleted items to get back items that were in the deleted items folder over the last 7 days. From: Chris Pohlschneider [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:04 PM To: MS-Exchange Admin Issues Subject: Recover Deleted items not working Hello, I am having an issue where the Recover Deleted items section in outlook is not storing e-mails that have been deleted. I checked the Exchange Server and I have deleted items to be set to keep for seven days. I have read articles about a registry key for DumpsterAlwaysOn, but figured I did not need that on the Exchange Server since I have the option to keep deleted items for 7 days. I do not have the option selected for Do Not Permanently delete mailboxes and items until we the store has been backed up. Any help would be appreicated with this. Exchange 2003 SP2 Windows Server 2003 SP2 Chris Pohlschneider Network Administrator [EMAIL PROTECTED] 937-494-2559 ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~Outlook.jpg
Re: defrag error
17 gigs and your stm should only take about 20 minutes or so. I only use the command line, sorry I should have said that first. xcopy seems to work the best for me. Windows has been known to bugger up a copy. Answering on the fly, sorry. When you create the partition and format make sure that you set it to not be able to compress folders and files. This is bad Juju for exchange. On large files Windows has a bad habit of compressing files weather you want it to or not. You will need to go in to the advanced properties of the file after copy to make sure this hasn't happened, just make sure all boxes are unchecked. Best is to totaly blow the drive away and start from scratch and set up the drive correctly. That may be what's buggering you eseutil. Sorry, answering on the fly. - Original Message - From: [EMAIL PROTECTED] To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 1:53 PM Subject: RE: defrag error Thanks Matt ;) From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:46 PM To: MS-Exchange Admin Issues Subject: Re: defrag error Naw just a little girlscout kiss... =) - Original Message - From: Tim Vander Kooi To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 1:44 PM Subject: RE: defrag error That's an awfully personal question. I hope you at least bought him dinner. :-P TVK From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:41 PM To: MS-Exchange Admin Issues Subject: Re: defrag error How big is the store? - Original Message - From: [EMAIL PROTECTED] To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 1:27 PM Subject: RE: defrag error Ok, so I'm copying to the folder out to the external drive.this sucks!@ but I'm going to sit back and wait and see what occurs. Thanks for everyone's assistance. Thomas From: Matt Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:08 PM To: MS-Exchange Admin Issues Subject: Re: defrag error I've had to do that although PSS will tell you it doesn't work. I might add to that make sure and reformat the drive with the machine it's plugged into before doing anything. Expect it to be very slow, You may even think it's failed it's so slow, even Esata sucks. I've found it better to just have a big sata drive and controller card for temp space. And backup, backup ,backup! M - Original Message - From: Jake Gardner To: MS-Exchange Admin Issues Sent: Thursday, November 13, 2008 12:51 PM Subject: RE: defrag error I'm not 100% on this but what about copying the /mbdata folder to the ext drive, run eseutil on it there. Just make sure you're all backed up! Thanks, Jake Gardner TTC Network Administrator Ext. 246 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped...HELP..SOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space.ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command.and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166
Re: ** PLEASE REMOVE **
Hmmm, I don't.oh yeah, I have a rule. ;) On Thu, Nov 13, 2008 at 3:41 PM, Matt Moore [EMAIL PROTECTED]wrote: So does everybody. Make a rule. =) - Original Message - *From:* David Mazzaccaro [EMAIL PROTECTED] *To:* MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.com *Sent:* Thursday, November 13, 2008 1:31 PM *Subject:* ** PLEASE REMOVE ** This address: [EMAIL PROTECTED] I get NDRs from them everytime I post. Thanks -- Sherry Abercrombie Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
Managing Mobile Devices in OWA 2007
Using EXch2k7, OWA 2007 Version: 8.1.240.5, we are unable to see the Menu Option to Manage Mobile Devices. I have verified that Outlook Anywhere is enabled on the CAS and the policy is being applied to the device upon sync. And in ECM I can manage the users mobile device, this is affecting users with WM56. Any suggestions would be greatly appreciated. Thanks, Bob ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
Outlook Popup
Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
Re: Outlook Popup
1) Have the program written to avoid that prompt by using the trust center code. (Not likely) 2) Install ClickYes. http://www.contextmagic.com/express-clickyes/ I suggestion option 2 ;) --James On Thu, Nov 13, 2008 at 8:06 PM, Greg Mulholland [EMAIL PROTECTED] wrote: Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Outlook Popup
Yeah we did look at 'redemption' but it required us to change cdo code. Not sure if Click yes still requires the same. i have seen that, i will forward it off to our dev's. I was hoping for an Outlook hack! Thanks From: James Wells [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:11 PM To: MS-Exchange Admin Issues Subject: Re: Outlook Popup 1) Have the program written to avoid that prompt by using the trust center code. (Not likely) 2) Install ClickYes. http://www.contextmagic.com/express-clickyes/ I suggestion option 2 ;) --James On Thu, Nov 13, 2008 at 8:06 PM, Greg Mulholland [EMAIL PROTECTED] wrote: Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~ ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Outlook Popup
http://www.mapilab.com/outlook/security/ looks promising From: Greg Mulholland [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:15 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup Yeah we did look at 'redemption' but it required us to change cdo code. Not sure if Click yes still requires the same. i have seen that, i will forward it off to our dev's. I was hoping for an Outlook hack! Thanks From: James Wells [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:11 PM To: MS-Exchange Admin Issues Subject: Re: Outlook Popup 1) Have the program written to avoid that prompt by using the trust center code. (Not likely) 2) Install ClickYes. http://www.contextmagic.com/express-clickyes/ I suggestion option 2 ;) --James On Thu, Nov 13, 2008 at 8:06 PM, Greg Mulholland [EMAIL PROTECTED] wrote: Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~ ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~ ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Outlook Popup
What exactly is causing the prompt? Outlook doesn't do this all by itself. I've written a script that sends mail and Outlook 2007 doesn't prompt when it runs. I know why but if you don't have a script you can modify, there's no point in elaborating. Carl From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 8:07 PM To: MS-Exchange Admin Issues Subject: Outlook Popup Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
Re: Outlook Popup
I think he's seeing this when sending a Remote assistance request IIRC John W. Cook Systems Administrator Partnership For Strong Families Painfully sent to you from my Blackberry From: Carl Houseman To: MS-Exchange Admin Issues Sent: Thu Nov 13 20:45:05 2008 Subject: RE: Outlook Popup What exactly is causing the prompt? Outlook doesn't do this all by itself. I've written a script that sends mail and Outlook 2007 doesn't prompt when it runs. I know why but if you don't have a script you can modify, there's no point in elaborating. Carl From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 8:07 PM To: MS-Exchange Admin Issues Subject: Outlook Popup Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg CONFIDENTIALITY STATEMENT: The information transmitted, or contained or attached to or with this Notice is intended only for the person or entity to which it is addressed and may contain Protected Health Information (PHI), confidential and/or privileged material. Any review, transmission, dissemination, or other use of, and taking any action in reliance upon this information by persons or entities other than the intended recipient without the express written consent of the sender are prohibited. This information may be protected by the Health Insurance Portability and Accountability Act of 1996 (HIPAA), and other Federal and Florida laws. Improper or unauthorized use or disclosure of this information could result in civil and/or criminal penalties. Consider the environment. Please don't print this e-mail unless you really need to. ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Outlook Popup
Be careful. I've run into way to many development situations where the attitude is what can we do to kill this security feature rather than what can we do to work around it. -Original Message- From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 5:15 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup Yeah we did look at 'redemption' but it required us to change cdo code. Not sure if Click yes still requires the same. i have seen that, i will forward it off to our dev's. I was hoping for an Outlook hack! Thanks From: James Wells [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:11 PM To: MS-Exchange Admin Issues Subject: Re: Outlook Popup 1) Have the program written to avoid that prompt by using the trust center code. (Not likely) 2) Install ClickYes. http://www.contextmagic.com/express-clickyes/ I suggestion option 2 ;) --James On Thu, Nov 13, 2008 at 8:06 PM, Greg Mulholland [EMAIL PROTECTED] wrote: Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~ ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~ ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Outlook Popup
I agree with James, though I would favor the Mapilabs solution for #2. -Original Message- From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 5:15 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup Yeah we did look at 'redemption' but it required us to change cdo code. Not sure if Click yes still requires the same. i have seen that, i will forward it off to our dev's. I was hoping for an Outlook hack! Thanks From: James Wells [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:11 PM To: MS-Exchange Admin Issues Subject: Re: Outlook Popup 1) Have the program written to avoid that prompt by using the trust center code. (Not likely) 2) Install ClickYes. http://www.contextmagic.com/express-clickyes/ I suggestion option 2 ;) --James On Thu, Nov 13, 2008 at 8:06 PM, Greg Mulholland [EMAIL PROTECTED] wrote: Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny ~ ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Outlook Popup
Nah we develop software that uses mapi to send mail. To change the method will mean a recode, so the client has asked if they can have a workaround. they are going to test the mapilabs software since its free. Greg From: Carl Houseman [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:45 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup What exactly is causing the prompt? Outlook doesn't do this all by itself. I've written a script that sends mail and Outlook 2007 doesn't prompt when it runs. I know why but if you don't have a script you can modify, there's no point in elaborating. Carl From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 8:07 PM To: MS-Exchange Admin Issues Subject: Outlook Popup Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: Outlook Popup
Google for clickyes. Regards, Michael B. Smith, MCITP:SA,EMA/MCSE/Exchange MVP My blog: http://TheEssentialExchange.com/blogs/michael Link with me at: http://www.linkedin.com/in/theessentialexchange From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 10:15 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup Nah we develop software that uses mapi to send mail. To change the method will mean a recode, so the client has asked if they can have a workaround. they are going to test the mapilabs software since its free. Greg _ From: Carl Houseman [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:45 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup What exactly is causing the prompt? Outlook doesn't do this all by itself. I've written a script that sends mail and Outlook 2007 doesn't prompt when it runs. I know why but if you don't have a script you can modify, there's no point in elaborating. Carl From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 8:07 PM To: MS-Exchange Admin Issues Subject: Outlook Popup Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: defrag error
It means that there isn't even enough disk space to mount the database. This is the ONE AND ONLY TIME I recommend compression in an Exchange environment. Go pick a few dozen exchange transaction logs and compress them. Regards, Michael B. Smith, MCITP:SA,EMA/MCSE/Exchange MVP My blog: http://TheEssentialExchange.com/blogs/michael Link with me at: http://www.linkedin.com/in/theessentialexchange From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 3:42 PM To: MS-Exchange Admin Issues Subject: RE: defrag error Anyone have an idea? I just placed a external drive that is 150 gigs and same error occurred. I'm stumped...HELP..SOS Thanks, Thomas From: Thomas Gonzalez Sent: Thursday, November 13, 2008 9:12 AM To: MS-Exchange Admin Issues Subject: defrag error So my journal / archive server is ran out of space.ok no problem. Dismount store, shutdown all services, open a command window type in the command and tell it to create the temp on a drive that has plenty of space: I run the command.and I receive this error below: Any ideas? TIA. Thomas D:\Program Files\Exchsrvr\bineseutil /d D:\program files\exchsrvr\mdbdata\priv 1.edb /tf:\tempdfrg.edb Microsoft(R) Exchange Server Database Utilities Version 6.5 Copyright (C) Microsoft Corporation. All Rights Reserved. Initiating DEFRAGMENTATION mode... Database: D:\program files\exchsrvr\mdbdata\priv1.edb Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM Temp. Database: f:\tempdfrg.edb Temp. Streaming File: f:\tempdfrg.STM Operation terminated with error -1808 (JET_errDiskFull, No space left on disk) a fter 4.166 seconds. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. This email and any attached files are confidential and intended solely for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the Girl Scouts of Southwest Texas. Warning: Although precautions have been taken to make sure no viruses are present in this email, Girl Scouts of Southwest Texas cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~image001.png
RE: Outlook Popup
Ok, I responded too quickly. I see that that has already been discussed. My bad! J Regards, Michael B. Smith, MCITP:SA,EMA/MCSE/Exchange MVP My blog: http://TheEssentialExchange.com/blogs/michael Link with me at: http://www.linkedin.com/in/theessentialexchange From: Michael B. Smith [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 10:51 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup Google for clickyes. Regards, Michael B. Smith, MCITP:SA,EMA/MCSE/Exchange MVP My blog: http://TheEssentialExchange.com/blogs/michael Link with me at: http://www.linkedin.com/in/theessentialexchange From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 10:15 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup Nah we develop software that uses mapi to send mail. To change the method will mean a recode, so the client has asked if they can have a workaround. they are going to test the mapilabs software since its free. Greg _ From: Carl Houseman [EMAIL PROTECTED] Sent: Friday, 14 November 2008 12:45 PM To: MS-Exchange Admin Issues Subject: RE: Outlook Popup What exactly is causing the prompt? Outlook doesn't do this all by itself. I've written a script that sends mail and Outlook 2007 doesn't prompt when it runs. I know why but if you don't have a script you can modify, there's no point in elaborating. Carl From: Greg Mulholland [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2008 8:07 PM To: MS-Exchange Admin Issues Subject: Outlook Popup Anybody know if there is a way to disable the outlook popup 'A program is trying to send an email message on your behalf etc. Accept, Deny Preferably in Outlook 2003 but anything will do Thanks Greg ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~
RE: How to on Mailbox store Deletion
That's what _I_ would do. What were you planning on doing? Regards, Michael B. Smith, MCITP:SA,EMA/MCSE/Exchange MVP My blog: http://TheEssentialExchange.com/blogs/michael Link with me at: http://www.linkedin.com/in/theessentialexchange From: Debashish Basak [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 12, 2008 1:22 PM To: MS-Exchange Admin Issues Subject: RE: How to on Mailbox store Deletion Yes, I can dismount the store. Do I dismount it and then delete it? From: Michael B. Smith [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 11, 2008 4:50 PM To: MS-Exchange Admin Issues Subject: RE: How to on Mailbox store Deletion So? Can you dismount the store? Regards, Michael B. Smith, MCITP:SA,EMA/MCSE/Exchange MVP My blog: http://TheEssentialExchange.com/blogs/michael Link with me at: http://www.linkedin.com/in/theessentialexchange From: Debashish Basak [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 11, 2008 7:26 PM To: MS-Exchange Admin Issues Subject: How to on Mailbox store Deletion Hello All, I have been reading a couple of posts recently to reclaim the white space on the Exchange databases. The most appropriate option has been proposed to create a new one, move the mailboxes to the new on and delete the old Mailbox store. My Scenario - Win2k3 AD, E2K I have emptied one of the stores except for two mailboxes - SMTP and Systemmailbox. Those two are already created in the new store. So, my question is - Is it safe to delete this empty (so called) Mailbox store or I need to do something with these two mailboxes before I delete the store? Thanking you all in advance for your help. Regards, Debashish ~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~ ~ http://www.sunbeltsoftware.com/Ninja~