Re: [expert] 9.1 kernel 2.4.21 vs cooker 2.4.21
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dissabte 14 Juny 2003 23:52, en Jack Coates va escriure: doesn't matter where it is, urpmi will select the one with the highest version number. This way your computer installs the update package instead of the distribution package for packages that have been updated but weren't previously installed. You're wright. But there's an error in cooker's kernel-source-2.4.21-1mdk. It installs itself in /usr/src/linux-2.4.21-0.1 instead 8-? - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE+66n5ok8j9RhtetwRAs+xAJ0WYjpToJ/JrBaXSRCmjIoP7Y5lgwCbBAJV Y5keX3ZbW0GeyP60ABNG16U= =nogI -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Cpu Frequency Scaling
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Divendres 13 Juny 2003 10:13, en Cesare va escriure: I would like to enable cpu frequency scaling,to sabe batteries and to lower cpu temperature, which should be already compiled in the standard 2.4.21-0.13mdk kernel shipped with bamboo. In spite of this I can't find any /proc/cpufreq What does cat /proc/acpi/processor/performance show? (maybe the path is different in yours) 8-? Mine show the P3-M abilities, 1200 and 800 mhz: - [EMAIL PROTECTED] /]# cat /proc/acpi/processor/CPU0/performance state count: 2 active state:P1 states: P0: 1200 MHz, 2 mW, 500 uS *P1: 800 MHz, 1 mW, 500 uS - It is allways working at 800 mhz unless more cpu power is needed thanks to a program called autospeedstep http://gpsdrive.kraftvoll.at/speedstep.shtml Hope that helps ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE+6eqgok8j9RhtetwRAlWYAJ0Ydr+yq3U9+hTGA4iJAt8uQf1o7QCghB9K vCS8Z0yZU/rBqH6m8aphrUk= =R8NU -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Cpu Frequency Scaling
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Divendres 13 Juny 2003 18:46, en Nisco va escriure: Il ven, 2003-06-13 alle 17:15, Joan Tur ha scritto: /proc/cpufreq What does cat /proc/acpi/processor/performance show? ]# cat /proc/acpi/processor/CPU0/performance not supported and ]# cat /proc/acpi/processor/CPU0/info processor id:0 acpi id: 1 bus mastering control: yes power management:yes throttling control: no performance management: no limit interface: no Last two are yes in mine... Reading /usr/src/linux/Documentation/cpufreq it tells me under supported architectures: AMD Elan: SC400, SC410 Speed Limits Detection: Not implemented. You need to specify the minimum and maximum frequency in the boot parameter mmm... I know this mobile AMD Athlon(tm) XP 1400+ has minimum speed 50 and maximum 120 but I don't know if the supported AMD family is the same. You can try to make it work... Your kind of processor has an automatic speed detection, mine not in any case ... I have to set the parameters manually. Yes, I see. What does your cat /proc/sys/cpu/0/speed looks like? - --- [EMAIL PROTECTED] quini]# ls /proc/sys abi/ debug/ dev/ fs/ kernel/ net/ proc/ vm/ - --- No cpu dir in /proc/sys 8-? Hopefully trying to set the frequency won't hurt my hardware (Fear!) Hope not ;) Thanks for the info and the links Cesare You're welcome ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE+6gWHok8j9RhtetwRAowFAJ0SjnNlJzjvq1s83uo4tO5xMziEjACfZB6/ dseKseiSe1MTvfEsAEd5u9M= =C7WV -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Benefits of recompiling the kernel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dijous 03 Abril 2003 23:07, en Kwan Lowe va escriure: On Thu, 2003-04-03 at 15:35, Joan Tur wrote: Well there's something that's going to happen: the memory the kernel uses is lower if you compile it with only the options you're going to need. 2 examples: 1. Laptop, 224MB RAM, from 101 to 80MB (MDK 9.1): 21MB memory saved. 2. Server, 72MB RAM: from 65,9MB to 57,4MB (MDK 9): 8,5MB memory saved. Amounts have been checked after booting, using a console, using top command... I'm not sure that I'm reading your numbers correctly. Is 224M your total RAM on the laptop (I'm assuming a 256M machine with 32M allocated for video)? That's right. Is it possible that you're reading file/buffer allocated memory as free/not free? Yes, it is possible... I'm not an expert guy O8-) What does the following command report on both new/old kernels? dmesg|grep ^Memory This should report a kernel code number that, even in the most fully loaded kernels, shouldn't be greater than a couple Meg or so. Laptop: - -compiled kernel: Memory: 224188k/229312k available (1417k kernel code, 4736k reserved, 514k data, 96k init, 0k highmem) - -standard (9.1) kernel: Memory: 223320k/229312k available (1410k kernel code, 5604k reserved, 1118k data, 136k init, 0k highmem) Server: - -compiled kernel: Memory: 70880k/73728k available (992k kernel code, 2460k reserved, 365k data, 80k init, 0k highmem) - -standard (9) kernel: Memory: 70376k/73728k available (1176k kernel code, 2964k reserved, 444k data, 136k init, 0k highmem) So the only computer that's saving memory for it's own use is the 2nd one? 8-? Thanks. - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+jZ1aok8j9RhtetwRApm1AKCV3SyRxpCnYZ3TiGHyh/qwVyePWgCgkp1A 1g4JjtLLo034y8ZIXacnZ6Q= =ywGv -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Benefits of recompiling the kernel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dijous 03 Abril 2003 00:48, en Kwan Lowe va escriure: A kernel recompile won't produce a faster machine (at least, not in the conventional sense). Well there's something that's going to happen: the memory the kernel uses is lower if you compile it with only the options you're going to need. 2 examples: 1. Laptop, 224MB RAM, from 101 to 80MB (MDK 9.1): 21MB memory saved. 2. Server, 72MB RAM: from 65,9MB to 57,4MB (MDK 9): 8,5MB memory saved. Amounts have been checked after booting, using a console, using top command... - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+jJsgok8j9RhtetwRArxqAJ9sjAFV+MLggUYV6P3YA23AAn2eegCgl4WP MFAbzugYUEVjOa/OL2OJSWg= =hLVf -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Shorewall, eth0 eth1
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Diumenge 23 Març 2003 20:09, en Jack Coates va escriure: On Sun, 2003-03-23 at 10:16, Joan Tur wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! In my laptop I've got wired nic (eth0) and wireless nic (eth1). After modifying /etc/shorewall/interfaces it is as shown: - -- #ZONEINTERFACE BROADCAST OPTIONS net eth0192.168.0.4 detect net eth1192.168.0.44detect - -- If I unplug wired eth0 and plug the pcmcia eth1 in it works fine, but after taking the pcmcia card out system hangs. Any idea on how to solve that? I'd prefer to have the firewall on... Why are you blaming a system hang on shorewall? Are you using cardctl --eject before removing the card? No, I am not. Running cardctl eject before removing it makes the system not to hang. Thanks ;) Anyway, you've done shorewall wrong. Try specifying different zone names, then duplicating the policy / rules if you want the same policy and rules for each interface. For instance: #ZONEINTERFACE BROADCAST OPTIONS wire eth0 detect filterping,dhcp wireless eth1 detect filterping,dhcp vmnetvmnet1 detect dhcp - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+fh4uok8j9RhtetwRArstAJ9+7qQGaOQ/FLt/sSOui9ty51kNpgCgkbZw HMv8cBhlKiST5y4W/1CUGcE= =Fqb7 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Solved: Php-nuke postfix not working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Solved using a real domain as domainname (restaurantecaribe.com)... Thanks ;) Es Divendres 14 Març 2003 01:16, en Todd Lyons va escriure: Joan Tur wrote on Thu, Mar 13, 2003 at 10:35:28PM +0100 : syslog after having ordered php-nuke to send the password to a user: - - Mar 13 23:26:54 quiniserver postfix/pickup[2999]: 8EE2BD789: uid=71 from=apache Mar 13 23:26:54 quiniserver postfix/cleanup[3004]: 8EE2BD789: message-id=[EMAIL PROTECTED] Mar 13 23:26:54 quiniserver postfix/nqmgr[3000]: 8EE2BD789: from=[EMAIL PROTECTED], size=792, nrcpt=1 (queue active) Mar 13 23:27:01 quiniserver postfix/smtp[3006]: 8EE2BD789: to=[EMAIL PROTECTED], relay=mx3.wanadoo.es[62.37.236.139], delay=8, status=sent (250 OK id=18taCo-0001dS-00) That other server named mx3.wanadoo.es told you that it accepted it. It took a total of 8 seconds for your mail server to connect to it, give it the message, and logout. The problem is not your end. However, I really don't like the fact that it says it's from [EMAIL PROTECTED] The remove server could be dropping it after it accepts it from you because it's not a valid domainname. Blue skies... Todd - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+c9Nrok8j9RhtetwRArEUAJsFrwgF64jZIAJ9tGdDjnQTVyo3EACfXAQA F5SIenEGAvQlPBvHPmQx/WA= =fNn7 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Php-nuke postfix not working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Divendres 14 Març 2003 01:16, en Todd Lyons va escriure: Joan Tur wrote on Thu, Mar 13, 2003 at 10:35:28PM +0100 : syslog after having ordered php-nuke to send the password to a user: - - Mar 13 23:26:54 quiniserver postfix/pickup[2999]: 8EE2BD789: uid=71 from=apache Mar 13 23:26:54 quiniserver postfix/cleanup[3004]: 8EE2BD789: message-id=[EMAIL PROTECTED] Mar 13 23:26:54 quiniserver postfix/nqmgr[3000]: 8EE2BD789: from=[EMAIL PROTECTED], size=792, nrcpt=1 (queue active) Mar 13 23:27:01 quiniserver postfix/smtp[3006]: 8EE2BD789: to=[EMAIL PROTECTED], relay=mx3.wanadoo.es[62.37.236.139], delay=8, status=sent (250 OK id=18taCo-0001dS-00) That other server named mx3.wanadoo.es told you that it accepted it. It took a total of 8 seconds for your mail server to connect to it, give it the message, and logout. The problem is not your end. So it should work (it does not) However, I really don't like the fact that it says it's from [EMAIL PROTECTED] The remove server could be dropping it after it accepts it from you because it's not a valid domainname. I haven't paid for one. I am using quiniserver as hostname with no domainname in /etc/postfix/main.cf: - -- Mar 14 20:05:48 quiniserver postfix/smtp[1691]: warning: My hostname quiniserver is not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf - -- Here's main.cf: - -- #myhostname = restaurantecaribe.com #mydomain = restaurantecaribe.com - -- So no host nor domainname are set. It's like this in my laptop and postfix is working (maybe apache accesses postfix in a different way?) Any idea?? 8-? Thanks again ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+chsrok8j9RhtetwRAnmKAJ44Pw1D8XhwXKbL9SVDeTO54KfdawCfVFqF TMulEVptNgFvg8Vz8R6tAbI= =433s -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Php-nuke postfix not working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I've installed Mdk9, php-nuke 6, mysql, php4, postfix and apache. It seems to work fine, but no automatic message sent from php-nuke arrives. Postfix seems to work (I've started kmail, configured it to use localhost:25 and sent successfully a message). Here's the smtp configuration of /etc/php.ini: - - [mail function] SMTP = localhost:25 ;for win32 only ;sendmail_from = [EMAIL PROTECTED] ;for win32 only ;sendmail_path = sendmail -t -i :25;for unix only, may supply arguments as well (default is 'sendmail -t -i') - - Thanks!! ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+cO9hok8j9RhtetwRAlHEAJwPtS4nP1HFjFrZ8R4NDeuSyWclZwCfejiU dKumUNal/KKky6EnEKnsawc= =dLoV -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Php-nuke postfix not working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Maybe the following details may help: /etc/hosts: - - [EMAIL PROTECTED] root]# cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 192.168.0.1 quiniserver.quini quiniserver - - syslog after having ordered php-nuke to send the password to a user: - - Mar 13 23:26:54 quiniserver postfix/pickup[2999]: 8EE2BD789: uid=71 from=apache Mar 13 23:26:54 quiniserver postfix/cleanup[3004]: 8EE2BD789: message-id=[EMAIL PROTECTED] Mar 13 23:26:54 quiniserver postfix/nqmgr[3000]: 8EE2BD789: from=[EMAIL PROTECTED], size=792, nrcpt=1 (queue active) Mar 13 23:27:01 quiniserver postfix/smtp[3006]: 8EE2BD789: to=[EMAIL PROTECTED], relay=mx3.wanadoo.es[62.37.236.139], delay=8, status=sent (250 OK id=18taCo-0001dS-00) - - What else could I check to know what's happening??!! 8-? Thanks again!! ;) Es Dijous 13 Març 2003 21:51, en Joan Tur va escriure: I've installed Mdk9, php-nuke 6, mysql, php4, postfix and apache. It seems to work fine, but no automatic message sent from php-nuke arrives. Postfix seems to work (I've started kmail, configured it to use localhost:25 and sent successfully a message). Here's the smtp configuration of /etc/php.ini: - [mail function] SMTP = localhost:25 ;for win32 only ;sendmail_from = [EMAIL PROTECTED] ;for win32 only ;sendmail_path = sendmail -t -i :25;for unix only, may supply arguments as well (default is 'sendmail -t -i') - Thanks!! ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+cPmgok8j9RhtetwRAibMAJoDB+plVlNSqzECfIQlBwNCp8LysgCgkJXv oXh4IocLRAL9v+ywRqB13Vc= =1XEl -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ATI Radeon drivers
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Diumenge 02 Març 2003 01:43, en John Haywood va escriure: I tried the ATI driver, which has its own XFreeConfig-4 generator, and generates a completely useless file. You haven't told us what Radeon you have, but the Ati's drivers are for 8500 to 9700 cards. The other Radeons are supported by DRI (afaik). - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+YVY7ok8j9RhtetwRAiZiAJ43lgQznBAWrDXaMqEumV+RhaFJPwCgh7y+ bBkk/WtX9/b/UbrjiChBsT4= =Jtw3 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] rpm error?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I'm trying to install a package that I had already installed in my previous installation, but I get: - --- [root@quinipt flphoto]# rpm -i flphoto-1.0-linux-2.4-intel.rpm flphoto-1.0-linux-2.4-intel.rpm: read manifest failed: Success [root@quinipt flphoto]# urpmi flphoto-1.0-linux-2.4-intel.rpm ja està tot instal·lat (everything already installed) [root@quinipt flphoto]# rpm -q flphoto package flphoto is not installed - --- I've also run rpm --rebuilddb (no difference) TIA - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+VVHyok8j9RhtetwRAraqAJ4oXn8vntx1ox85JZIQX9qDNPjE9gCfQKqw RpEZ84GwVf957E3hSZC97Lk= =xKR/ -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Radeon 8500LE PBA in MDK9
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dilluns 10 Febrer 2003 23:57, en Jeferson Lopes Zacco va escriure: I tried the ATI binary drivers , the latest incarnation which is said to work with PBA cards... it compiles fine ( what a mess ATI did though.. if it's RPM why don't they just offer the drivers pre-compilde for all the major distros? too lazy for testing anything but RHs?) But even then the drivers fail if GLX extensions are enabled, the X-server just crash. It runs fine without GLX - but then , no games, no 3D stuff... Mine's a 9000 128Mb. Using Ati's 2.5.1 driver it suddenly stops sending data to the (analog) monitor. No idea about why 8-( - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+SQ4Cok8j9RhtetwRAt3QAJ9c9bMmK68ej4fAHQI8cw/XFEIBywCcC5tw 12tJSIEmZj7p+BR/wVOT5vo= =gHzR -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Limitting number of times a program opens
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! We've got 1 PC working as X server and 6 X clients. All of them are using the same user/pwd. We'd like to limit the maximum times a program is run, in order to save resources and prevent bad boys. Can this be done? If the solution was to use a different user/pwd in every client how could this be done? TIA - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+Rk6Bok8j9RhtetwRAj2HAJ49hlgwDpyCDMIjEb/AoP4qrmh0sQCfUEe/ eKJdjAh+SBXQCpw+uNhzcHE= =ANZj -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Saving rpms dw by urpmi
Hallo! I'd like to save some of the rpms downloaded by urpmi, but I've only found --noclean and it just doesn't erase the existing rpms in /var/cache/urpmi/rpms... Am I missing any parameter?? 8-? TIA -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Ripping recording audio CDs: resources used?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I've got 2 computers, 1 PC with a RW and a DVD reader, and a laptop with a DVD-RW combo. In all 3 atapi units have something common: ripping and recording audio CDs take 100% cpu and make the system almost unusable. This only happens with audio CDs (recording on the fly from the DVD to the RW uses 0-10% cpu if it's a data CD). I don't know where to have a look. As I've mentioned, burning data CDs don't use only 0-10% cpu and the system responds quick. I've booted XP and this problem doesn't appear there (I use XP to play games). Thanks in advance :) Note: under Mandrake 9 with dma on. I'm sending together with this email the output of both dmesg' commands. - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+Oq+8ok8j9RhtetwRAj7bAJwOfjAQoy72LMAFK+iwMl2JZRY2PQCfcZ9B wziXTMaAUampo9UmprJ/nzc= =5k+U -END PGP SIGNATURE- 20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 1-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 2-order allocation failed (gfp=0x20/0) __alloc_pages: 1-order allocation failed (gfp=0x20/0) __alloc_pages: 1-order allocation failed (gfp=0x20/0) __alloc_pages: 1-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0) __alloc_pages: 3-order allocation failed (gfp=0x20/0
[expert] Shorewall switching between NICs
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I was having problems trying to configure a wireless nic (configured as eth1), and then I had a look at system log and found that shorewall was blocking 32768 udp port accesses. So I added that port to shorewall's rules and that was it... ... but later I was back home (where I use the onboard nic, eth0) and the problem appeared. I've had to reload shorewall in order to make that connection work. Any idea? TIA - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+NaEbok8j9RhtetwRAo5kAJ4x8rIl/xgudIXGqgmGBKJfINAvNgCgqQj1 7LKaUnv95lveqJaOSYb4k9w= =7HgA -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] X: 2 mouses with different speeds?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Divendres 10 Gener 2003 18:03, en J. Grant va escriure: KDE has some configure options for this. However, i have the same problem as you. kde scale 0-10 i think it was anything more than 1 was too quick. and it goes up in steps of 1 ! i've emailed them, but no reply Thanks. Playing a bit with Kde's mouse options now there's less speed difference between both mouses ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+Icmfok8j9RhtetwRAtQ1AJoDVOD4Ev3UPNA9n1dQN6Ls1QhI+ACfYHQX IS6G/+Ka47mrocZx89RuSiU= =Qc04 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] X: 2 mouses with different speeds?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I've modified XF86Config-4 in order for me to be able to use both integrated (it's a laptop) and usb mouses, and it now works. The problem is that the usb mouse moves too fast. How can I slow only the usb one? 8-? TIA Note: I add my config file ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+HeHXok8j9RhtetwRArDXAJ9NYObrTzd5JZ7NuSOcbiAW8fUK5ACfZuyU WNZO7am7CbwuXUpPuAnmFm4= =XQz7 -END PGP SIGNATURE- # File generated by XFdrake. # ** # Refer to the XF86Config man page for details about the format of # this file. # ** Section Files # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath unix/:-1 EndSection Section ServerFlags #DontZap # disable CrtlAltBS (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable CrtlAltKP_+/KP_- (resolution switching) EndSection Section Module Load dbe # Double-Buffering Extension Load v4l # Video for Linux Load extmod Load type1 Load freetype Load glx # 3D layer EndSection Section InputDevice Identifier Keyboard1 Driver Keyboard Option XkbModel pc105 Option XkbLayout es Option XkbOptions EndSection Section InputDevice Identifier TouchPad Driver mouse Option Protocol PS/2 Option Device /dev/psaux Option Emulate3Buttons Option Emulate3Timeout 50 #Option ZAxisMapping 4 5 EndSection Section InputDevice Identifier RataUSB Driver mouse Option Protocol IMPS/2 Option Device /dev/usbmouse #Option Emulate3Buttons #Option Emulate3Timeout 50 Option ZAxisMapping 4 5 EndSection Section Monitor Identifier monitor1 VendorName Generic ModelName Flat Panel 1024x768 HorizSync 31.5-48.5 VertRefresh 40-70 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine 1024x48065.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine 768x576 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine 768x576 63.07 768 800 960 1024 576 578 590 616 EndSection Section Device Identifier device1 VendorName S3 Incorporated BoardName S3 Savage4 Driver savage VideoRam 16384 Option DPMS # Option no_accel # You may enable this if there are timeouts when starting X EndSection Section Screen Identifier screen1 Device device1 Monitor monitor1 DefaultColorDepth 24 Subsection Display Depth 8 Modes 1024x768 800x600 640x480 EndSubsection Subsection Display Depth 15 Modes 1024x768 800x600 640x480 EndSubsection Subsection Display Depth 16 Modes 1024x768 800x600 640x480 EndSubsection Subsection Display Depth 24 Modes 1024x768 800x600 640x480 EndSubsection EndSection Section ServerLayout Identifier layout1 InputDevice Keyboard1 CoreKeyboard InputDevice TouchPad CorePointer InputDevice RataUSB SendCoreEvents Screen screen1 EndSection Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] compiling kernel with acpi and w/o apic
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dimecres 18 Desembre 2002 15:28, en flacycads va escriure: Jack, I was getting ready to try 2.4.20, either vanilla (with preempt patch, and a modified Mandrake .conf), or cooker 2.4.20-2. Could you advise me in on as to why you aren't happy with 2.4.20? I was under the impression it fixed some USB problems, of which I am having. My experience is similar to Jack's: 2.4.19-19mdk works better to me than 2.4.20-2mdk: - -In both usb sound aren't working after resume (swsusp.sh 0.4) - -2.4.19-19 suspends (and resumes) fine, 2.4.20-2 sometimes hang and shows some errors when resuming. On Wednesday 18 December 2002 12:23 am, Jack Coates wrote: the default 9.0 kernel comes with a very old version of ACPI -- you should either go from vanilla (which broke USB in my case) or download a cooker kernel with newer ACPI. I've had ok luck with 2.4.19-19, currently on 2.4.20-2 and not happy with it. On Tue, 2002-12-17 at 08:19, Sascha Noyes wrote: -BEGIN PGP SIGNED MESSAGE- - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+ALJMok8j9RhtetwRAsnfAKCU+ffgcRhcFpyVajfjg4ZuJ3WikgCfcSdG RfN/6/BT8rZBFHYokOd4T2I= =2n5E -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] su program not found
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I'm using kde, and I get that error message when trying to open a program available only for root (f.i. drakconf). Here's the output of the console I've run it from: - -- [quini@quinipt cdr]$ drakconf kdesu (kdelibs): ERROR: [process.cpp:82] Master setup failed. kdesu (kdelibs): ERROR: [process.cpp:82] Master setup failed. - -- TIA - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE945Uvok8j9RhtetwRAv+kAKCpqnVb5eqGZyiNw3hVFSNadwUE5gCglOXd lqNFTsIqDxYbNJSWBwUohv8= =wJ2b -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Why is it so difficult to get a wireless card to work in linux????
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dilluns 18 Novembre 2002 08:00, en jarmo va escriure: That's the point...I get no messages,because MDK does stops installation right at the beginning at the point determining pcmcia...No matter how long waiting,it hungs there..(waited 7 hours something going further...no way) Have tried to change different pci slots,no effect. If your bios has an option called Bios PnP try setting it to OFF... if it hasn't that option just forget this message ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE92RUVok8j9RhtetwRAljZAJ45nVQ9jXsCUkOAnxSFUc3BmN8PRACeKnh7 nQ1dSn3gHwIWy36r+D9hV2c= =IhHe -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Irda laptop Palm
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dimarts 05 Novembre 2002 01:04, en Tommy Wareing va escriure: On Mon, Nov 04, 2002 at 09:13:05PM +0100, Joan Tur wrote: I was wondering if it is possible to sync a Palm m515 through Irda. I don't know if irda is working in my laptop (I haven't used it)... how can I check Irda's support is installed and working ?? I've just set up my USB Infrared adaptor. And it works! To see if you've got the linux side working: $ lsmod | grep ir irda 87152 1 [irda-usb] You may need other modules, depending on the eaxct nature of your IrDA unit (I need irda-usb, for example), but you at least need this one. lsmod didn't show any irda modules, but insmod irda works. $ dmesg | grep IrDA IrDA: Registered device irda0 Wahey! My machine knows it's got an IrDA interface. Make a careful note of the device name. Nothing about irda is shown by dmesg 8-? $ ps -ef | grep irattach root 2237 1 0 23:57 ?00:00:00 irattach irda0 -s If this process doesn't exist, then just start it. The parameter is, of course, copied from the device at the previous stage. If you're running the irda service, then this device is set in /etc/sysconfig/irda. I've had a look at the modules tree and found ircomm, insmod'ed it and now lsmod shows: - --- ircomm-tty 22240 0 (autoclean) ircomm 8552 0 [ircomm-tty] irda 96016 0 [ircomm-tty ircomm] - --- And ps shows: - --- [rootquinipt /]# ps -ef | grep irattach root 2984 2903 0 18:21 ttyp000:00:00 grep irattach - --- To test I'm running pilot-xfer -p /dev/ircomm1 -l, having tryed with no luck with /dev/ircomm0/1, /dev/ttyp0/1 Maybe despite modules load fine the irda hardware is not supported? 8-? Hope not... Thanks! ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9x/9lok8j9RhtetwRAuOSAJ95nBbGlgj3AMtL/rFXHV+XY/jJZQCfRAr2 nxWOxxtxY1Ek9jnJjybpAZ4= =Yajv -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Irda laptop Palm
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I was wondering if it is possible to sync a Palm m515 through Irda. I don't know if irda is working in my laptop (I haven't used it)... how can I check Irda's support is installed and working ?? Thanks in advance ! ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9xtTRok8j9RhtetwRAjM2AJ9n492Pk6/KhXebQ5+PfeRKdVxITgCgimCB E4aKB05oNC2wfKF56+LR5tE= =EPX9 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Shorewall firewall
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I've started drakconf - security - firewall, and enabled web server, ssh, ftp and cups. Then I am able to access that PC from the net using http, ftp, ssh... but not cups. The other PC is no longer able to see that printer. TIA - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9wAcyok8j9RhtetwRAlCBAJoDKdXpohuEtQozI8zEN1d3hE7tvACeIC6E jlHDesVPysn3Aw4LsZ8G+3w= =OKAP -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] HP Pavilion and hibernation
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dimecres 30 Octubre 2002 03:37, en HoytDuff va escriure: On Tuesday 29 October 2002 05:03 pm, Jan Hendrik Mangold scribbled in crayon on a yellow legal pad: I am dying to not have to boot into XP anymore, so please throw me a bone here ... :) Try the newest Cooker kernel. I hear that it features ACPI support. That's right, I've got it working here... but to be able to hibernate the laptop you need swsusp, not acpi. I've also read that both acpi and hibernation patches cannot be mixed. 8-? - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9wAe2ok8j9RhtetwRAgFLAJ4toDd6mSajnj6jPnQhSF3pLDrWOwCfaGTr TcFuJRx1VbqqvX1uqJeZYe4= =olGa -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Shorewall firewall (solved)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I've found it. I have to select cups in both computers, not only at the one where the printer is connected to O8-) Es Dimecres 30 Octubre 2002 17:22, en Joan Tur va escriure: Hallo! I've started drakconf - security - firewall, and enabled web server, ssh, ftp and cups. Then I am able to access that PC from the net using http, ftp, ssh... but not cups. The other PC is no longer able to see that printer. TIA - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9wA46ok8j9RhtetwRAox8AJoClnEob3YcxDyqcnsiFsFAjlD8wwCeKW+X h5HY38yHPUlsM0RqhWq/g4s= =QK2P -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] CUPS and lpd
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dimecres 30 Octubre 2002 17:47, en Praedor Tempus va escriure: Somewhere along the line of reinstalling linux on my laptop, I doofed up the printer setup. I would SWEAR I selected CUPS but when I bring up printerdrake or the Printing Manager in KControl, it indicates that I am using LPD and it will not permit me to change to CUPS. I have CUPS installed - it just doesn't appear to be useable. How do I redo the printer setup without going through some reinstall-like procedure? You'll probably be able to select cups if you first run kcontrol as root, then as user. Try it... praedor - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9wBH+ok8j9RhtetwRAs/IAJ0UJ0NRT4DsW9khBaL5aq+h7nLLWwCfUXAB MP+3Dbm2//9Rx1iDHuc8Om8= =n//x -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] g++ executable not found?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dilluns 28 Octubre 2002 00:10, en Charles A Edwards va escriure: On Sun, 27 Oct 2002 23:48:22 +0100 Joan Tur [EMAIL PROTECTED] wrote: libqt3 is installed... should I install libqt3-devel ? 8-? Yes. Also you need gcc-c++ Thanks (again). urpmi libqt3-devel does the trick ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9vrmWok8j9RhtetwRApMvAKCNa6gVabFZPgqztfVRNACX8VuO3QCfb7oU vP58NlS7mTdERfxsHRn8h1o= =G2JG -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Can't find X includes ??
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I'm trying to compile kacpi-06 in order to have a battery monitor (I have to use acpi), but I get the following error when running ./configure... no idea on how to solve it 8-? - --- checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths! [rootquinipt kacpi-0.6.kde3]# - --- Help appreciated! Thanks! ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9u827ok8j9RhtetwRAhIBAJ9gjOcHsnbf7nxRS7oPJ4nvPC4tLgCcCwua x9MRJNX+RHs2VGeEI3PKGc4= =+EvQ -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Can't find X includes ??
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Diumenge 27 Octubre 2002 21:35, en Charles A Edwards va escriure: On Sun, 27 Oct 2002 12:27:55 +0100 Joan Tur [EMAIL PROTECTED] wrote: checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths! Install XFree86-devel Ah! Thanks!! ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9vFbRok8j9RhtetwRAgUlAJ0ffzHNVYZMQl4cn2VEs4t8DQRKEACeIuc0 P36eBZoAur6Qwm+lrESs3EE= =POKa -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] g++ executable not found?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I'm (still) trying to compile kacpi-0.6 but I get a new error: - --- checking for Qt... configure: error: Qt (= Qt 3.0.3) (headers and libraries) not found. Please check your installation! - --- libqt3 is installed... should I install libqt3-devel ? 8-? Here's the ./configure log file: - --- configure:21119: rm -rf SunWS_cache; g++ -o conftest -INO - -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -L/usr/lib/qt3/lib - -L/usr/X11R6/lib conftest.cc -lqt-mt -ljpeg -ldl -lXext -lX11 -lSM -lICE - -lresolv -lpthread 15 ./configure: line 1: g++: command not found configure:21122: $? = 127 configure: failed program was: #include confdefs.h #include qglobal.h #include qapplication.h #include qcursor.h #include qstylefactory.h #include private/qucomextra_p.h #if ! (QT_VERSION = 303) #error 1 #endif int main() { (void)QStyleFactory::create(QString::null); QCursor c(Qt::WhatsThisCursor); return 0; } configure:21162: error: Qt (= Qt 3.0.3) (headers and libraries) not found. Please check your installation! - -- TIA - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9vG03ok8j9RhtetwRAt9YAJ0bw/fqteh6wKpi8A9WCI4UasTWnwCeIR1p 40+yRgYEoPCykenA8uAhSsI= =VVlT -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Help patching?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dimarts 22 Octubre 2002 05:10, en Jack Coates va escriure: So what are the combinations I should try? Acpi patch? Swsusp patch? But not both? 8-? If the first two (alone) should work I don't why they don't in my laptop 8( I don't know what combination will work, but I don't think it's going to happen in 2.4.19. Go search the Linux-sony archives at: http://returntonature.com/mailman/listinfo/linux-sony for the thread titled: Re: [Linux-sony] VX88 integrated wireless problem It's clearer now. But I cannot find that 2.4.19-17 kernel source from Mandrake in cooker's ftps 8-? - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9taJBok8j9RhtetwRApKUAKCTYBc8SIJqDewr7cNKGgR1dUfJbgCfUR5B /v/5Pot5dqrLpxjiJCyRnmg= =nmVA -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] OpenOffice crashes
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dimarts 22 Octubre 2002 02:54, en Pierre Fortin va escriure: If there are no other OO processes running, delete the /tmp/OSL... file. That's what kept mine from starting the other week. It has worked for me. Thanks ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9taVnok8j9RhtetwRAm7pAKCUzlrTojoYncu3E2S9xalNA/dMCQCfayuE 43Ed1ryWW3fhPJsdngtc2dk= =uLmy -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Is acpi support in mandrake's kernel-source?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dilluns 21 Octubre 2002 21:37, en Jan Hendrik Mangold va escriure: Joan Tur wrote: I've applied acpi-20020918 patch to MDK9 kernel and now it doesn't compile, so I was wondering what's the acpi support included in Mandrake's kernel source. I thought the 2.4.19-16mdk kernel already contained the patch. At least I got it to compile and work. [quiniquinipt /]$ cat proc/acpi/info ACPI-CA Version: 20011018 Sx States Supported: S0 S1 S3 S4 S5 It seems to be a little bit old, is't it?? 8-? - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9tGx9ok8j9RhtetwRAhHxAJ91770wMhvKrxKEpIczJAsTwXDEagCeNuQ3 AHZ0/JSnOBCNzuOOp6xTkjk= =KMkr -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Help patching?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dilluns 21 Octubre 2002 17:53, en Jack Coates va escriure: Let me guess -- you probably installed the ACPI patch first, right? No, I haven't. I've tryed to compile after having applyed the acpi patch with no luck. Then I've uninstalled kernel-source, deleted the /src/linux-2.4.19-6mdk directory, reinstalled kernel-source and applied swsusp patch also without luck when trying to compile 8( That patch and the swsuspend patch won't coexist. I think I documented that on my VX88 page, but I can't remember for sure now. IIRC, ACPI suspension isn't going to happen with a 2.4 kernel. So what are the combinations I should try? Acpi patch? Swsusp patch? But not both? 8-? If the first two (alone) should work I don't why they don't in my laptop 8( Thanks! Jack On Sun, 2002-10-20 at 12:57, Joan Tur wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I'm trying to apply swsusp patch to kernel in order to be able to hybernate my HP Omnibook XT1000, but I am asked something I don't know how to answer: - - [rootquinipt linux]# patch -p1 patch-vanilla-2.4.19-swsusp14 Hunk #1 succeeded at 498 (offset -1 lines). ... can't find file to patch at input line 746 Perhaps you used the wrong -p or --strip option? The text leading up to this was: - -- |Index: linux-src/drivers/ide/hd.c |diff -u linux-src/drivers/ide/hd.c:1.1.1.1 linux-src/drivers/ide/hd.c:1.1.1.1.4.1 |--- linux-src/drivers/ide/hd.c:1.1.1.1 Sun Apr 14 17:32:36 2002 |+++ linux-src/drivers/ide/hd.c Sun Apr 14 18:51:47 2002 - -- File to patch: - - What's the right answer? Thanks! - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9swqtok8j9RhtetwRAkoPAJ973mfZkSSyRuITkOQ5Dp4voTAagwCeOJ/C eeuiPvnFQNUvHQ7tC9+1R0A= =b/2l -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9tG16ok8j9RhtetwRAtyvAJ9ygYIbtvf+nLMTVGpvcR9qHPif1wCfev6G 6Y4T/mZuMTwfKJK6nEeNx1I= =vAG3 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Openoffice has stopped working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Since today Openoffice is no longer working... and I've done nothing (AFAIK): [quiniquinipt quini]$ oocalc not well-formed (invalid token) at line 1, column 1, byte 1 at /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/XML/Parser.pm line 185 [quiniquinipt quini]$ Thanks appreciated. I've already uninstalled and reinstalled... - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9sSvIok8j9RhtetwRAiKAAJ9W1oDXQpyBYvo02bHzVqzOMNuz9wCbB4o9 uXAX8IVHwgco+eZNZu6spE8= =BSkD -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] problems in the kde-adressbook
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Dissabte 19 Octubre 2002 12:34, en Steffen Barszus va escriure: Hi ! A week ago I posted a problem with the de-adressbook of Mdk 9.0 . I'm sure everyone else will have this problem, since I had this problem on 3 different machines. So has anyone a suggestion on how to solve that or a workaround ? Just to make you know: it also happens to me. The problem: The colums width' of some entries is a lot to small. If I change the width and save an entry or restarting that application the width is as it was before doing anything. Could you please file a bugreport in bugzilla for this ? If any further infos are needed I would be glad to provide them. Thanks Steffen - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9sekwok8j9RhtetwRAmgYAJ40W8YEt1gEpdK672WfZeZNFXLVAgCeKuRs kOVqoceRkLVJEHDxDpRrRWk= =mSif -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Is acpi support in mandrake's kernel-source?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I've applied acpi-20020918 patch to MDK9 kernel and now it doesn't compile, so I was wondering what's the acpi support included in Mandrake's kernel source. Thanks in advance. - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9sJAhok8j9RhtetwRAnlUAJ9nTY1l+46Lrg9TQqOuiJTaH9Gg0gCfWy0A 4uEj3bimDKlPI6k6Pl7Nsr8= =uHeG -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Turning off screen with an S3 Savage4
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I've got a HP XT1000 laptop that's using a S3 Savage4. I've heard that this video card hasn't got X support for turning the screen off, but I've found a command line program (omke) that can turn it on or off... ... now I have to guess how to use it as screensaver. Is there any way of setting a screensaver up the way it runs a command when it has to power the screen off and another one to power it up again?? 8-? Thanks in advance ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9rEoQok8j9RhtetwRAnSdAJ9H2nACFRlGMyh2FpMKrtj5+IaJkwCgld2r ysiNKYJiD/jrv0B2g2UJ3Xs= =0Bef -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] PDAs syncing under linux ??
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thanks to all of you who have answered. I'll probably choowe between Palm m500 and m515. Es Dissabte 05 Octubre 2002 12:52, en Joan Tur va escriure: Hallo! Where can I get info about PDAs able to sync data with linux programs? I don't want to switch to win to do that... I've read Palm is supported. What about Pocket PCs? Would you purchase Palm or Micro$oft's ?? 8-? Thanks in advance. - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9owEAok8j9RhtetwRAhaAAJ96bwS8X3ZAb84IECg+bCTR0rTcJgCbB762 STo9WD+I3Hg8VLtXrhkFFIg= =yWYG -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Mail transport fails when using mail command
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! I'm using postfix to send mail to the internet, and it's working fine (smtp:localhost:25)... but I'd like to be able to send my pgp public key to someone running: gpg --export --armor | mail [EMAIL PROTECTED] but mail message is returned from wanadoo. Here's the content of /var/spool/mail/quini (quini is the user's name): - ... [EMAIL PROTECTED]: host mx2.wanadoo.es[62.37.236.145] said: 501 5.1.8 [EMAIL PROTECTED]... Domain of sender address [EMAIL PROTECTED] does not exist ... - So I suppose I have to modify postfix's configuration. I've read the man but it's a bit hard to me 8( Thanks in advance !! ;) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9oJDMok8j9RhtetwRAqfsAJwI7GKrLGFfUA2orDkUnvQMVBf0NQCdHiLs nU90Wit0Oc5jL6HMxX82Ci4= =znK0 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Mail transport fails when using mail command
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Diumenge 06 Octubre 2002 22:05, en Wolfgang Bornath va escriure: You have to edit /etc/postfix/main.cf (as root of course). If your mailto is [EMAIL PROTECTED] you have to tell this to the mailer. In the main.cf you have to edit a line: mydomain = wanadoo.es and myorigin = $mydomain So when you are logged in as quini your mail will be sent as from [EMAIL PROTECTED] When you are logged in as jtur it will be sent as from [EMAIL PROTECTED] Do a 'service postfix reload' after editing. THANKS!!! 8-) - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9oKwook8j9RhtetwRAnvLAJ9J0bwUvy3YJR2O6UB/94l5P2XA4gCfZsrO jo9ZQ41ALV0XFvgIPX19KT8= =Dwob -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] PDAs syncing under linux ??
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hallo! Where can I get info about PDAs able to sync data with linux programs? I don't want to switch to win to do that... I've read Palm is supported. What about Pocket PCs? Would you purchase Palm or Micro$oft's ?? 8-? Thanks in advance. - -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9nsRlok8j9RhtetwRApYpAJ9NkblHDacKFO3b3QmSsLTnjbCYAQCeNHGX Uj4ycQ45lLwp3n8dRCAXliQ= =lRZ9 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Where can I get help? 8-??
Hallo! As I haven't received any answer about my problem installing MDK into a Compaq Presario 905 I am wondering if you know any other mailing list or web site where I could find help. Thanks in advance. Es Dissabte 21 Setembre 2002 22:30, en Joan Tur va escriure: Hallo! A friend's Compaq Presario 905 is having the following problem while trying to boot from CD (tested with 8.2, 9rc2 and 9rc3): ... ALI15X3: IDE controller on PCI bus 00 dev 80 PCI: no IRQ known for interrupt pin A of device 00:10.0. Please try using pci=biosirq ... Partition check: hda: spurious 8259A interrupt: IRQ7 ... I've tryed booting linux pci=biosirq with no luck. He hasn't got the option in bios to assingn irqs manually. Last: we've found that booting linux ide=nodma reaches the following step (Enabling PCMCIA extension cards). Then it shows the following: Bank 3: b400083b at 01fc0003b0 Kernel panic: Unable to continue. As it's got 256Mb ram and the video card is 32Mb we've added mem=224M and mem=223M to boot parameters with no luck. HELP! He's going back to windowss... Thanks in advance ;) -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] 9rc1 bugs
Hallo! I've installed 9rc1 and found the following errors: -When installing I haven't been able to select kde-i18n-ca (kde's catalan language). It was available in b3 and b4. -On first boot the graphical login manager has shut itself down bringing me to a console. After init 3 and init 5 it's working. This has happened using 9b3 and 9b4 also. -I've logged in using user A. Sound was working. Then I've logged out and logged in user B and I've got a message saying that it couldn't open /dev/dsp. After chmod 666 /dev/dsp it's working. -drakconf 9.0-0.16 doesn't open and shows the following error message: Gtk-WARNING **: gtk_type_create(): unknown parent type `12'. gtkcreate_png: missing png file diskdrake_cdwriter.png at /usr/lib/libDrakX/ugtk.pm line 759 As rpmdrake opens the install-only part of the old rpmdrake and adding cooker source is no longer available (at least with automatic downloading of cookers mirrors' list) i've had to manually download the newer versions of drakconf, harddrake-ui, drakxtools, drakxtools-newt, and now with 9.0-0.20 it seems to work fine. -The Euro symbol is not working. I'm using kde. Those are the problems I've seen today. drakconf is nicer now than before... -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Beta 4 - Bad XFree Package
Es Dimarts 03 Setembre 2002 20:34, en Robert Barry va escriure: When trying to install Beta4 I get an error message saying that XFree86 is a bad package. I've tried downloading the ISO for CD#1 from 2 different mirrors and I get the same error message. Does the checksum match? 8-? -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Beta 4 - Bad XFree Package
Es Dimarts 03 Setembre 2002 22:01, en Damian G va escriure: On Tue, 3 Sep 2002 21:20:28 +0200 Joan Tur [EMAIL PROTECTED] wrote: Es Dimarts 03 Setembre 2002 20:34, en Robert Barry va escriure: When trying to install Beta4 I get an error message saying that XFree86 is a bad package. I've tried downloading the ISO for CD#1 from 2 different mirrors and I get the same error message. Does the checksum match? 8-? -- Joan Tur. Eivissa-Spain ..it's amazing.. every time a downloaded mandrake installation CD is corrupted.. it boots, it asks the questions.. it begins the installation.. ..and fails to install X. seems to happen every time ;oP (it happened to me too with 7.2) Damian I've downloaded 2 corrupted 9b3 ISOs, 1 corrupted 9b4 ISO and all 3 corrupted rc1 ISOs (last time it was a 9b4 hang!!) ;) Do you understand now my question?! ;) -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Beta 4 - Bad XFree Package
Es Dimarts 03 Setembre 2002 22:57, en Robert Barry va escriure: I ran a checksum program (windows version) and it said it matched for Beta 4 cd #1. I also had downloaded a beta 3 iso and tried it this weekend and it had the same error Bad Package for Xfree. Then I'd suggest you to burn it again... to a RW for instance --- Joan Tur [EMAIL PROTECTED] wrote: Es Dimarts 03 Setembre 2002 20:34, en Robert Barry va escriure: When trying to install Beta4 I get an error message saying that XFree86 is a bad package. I've tried downloading the ISO for CD#1 from 2 different mirrors and I get the same error message. Does the checksum match? 8-? -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Beta 4 - Bad XFree Package
Es Dimarts 03 Setembre 2002 23:50, en Robert Barry va escriure: Could it be a problem with my Hardware configuration? CPU VIA C3 Motherboard Shuttle FV25 Graphics chip On-board S3 Twister The installation for both Beta 3 and 4 have the same error message. Downloaded from different mirrors, and burned the ISOs to many different CDs. Mandrake 8.2 installs ok If ISOs were verifyed using md5sums I have no idea. I'm sorry 8( Robert --- Joan Tur [EMAIL PROTECTED] wrote: Es Dimarts 03 Setembre 2002 22:01, en Damian G va escriure: On Tue, 3 Sep 2002 21:20:28 +0200 Joan Tur [EMAIL PROTECTED] wrote: Es Dimarts 03 Setembre 2002 20:34, en Robert Barry va escriure: When trying to install Beta4 I get an error message saying that XFree86 is a bad package. I've tried downloading the ISO for CD#1 from 2 different mirrors and I get the same error message. Does the checksum match? 8-? -- Joan Tur. Eivissa-Spain ..it's amazing.. every time a downloaded mandrake installation CD is corrupted.. it boots, it asks the questions.. it begins the installation.. ..and fails to install X. seems to happen every time ;oP (it happened to me too with 7.2) Damian I've downloaded 2 corrupted 9b3 ISOs, 1 corrupted 9b4 ISO and all 3 corrupted rc1 ISOs (last time it was a 9b4 hang!!) ;) Do you understand now my question?! ;) -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] 9b4 bug: storing settings (kde)
Hallo! I've set opera as default browser using kcontrol, but this setting dissapears after reboot... -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] 9b4: lilo doesn't work
I've found the following problem when running lilo: - [root@quinipc etc]# lilo Fatal: geo_comp_addr: Cylinder number is too big (4479 1023) - Won't it be possible to choose what ide drives are to be scsi emulated -in order for them to be used by the recording software- ? Of course it could be under expert mode... I'm wondering that because I was changing my ide DVD to scsi-emulated O8-) Thanks. PD Here's my dmesg output: --- Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio PDC20265: IDE controller on PCI bus 00 dev 80 PCI: Found IRQ 11 for device 00:10.0 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:pio hda: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive hdc: AOPEN CD-RW CRW3248 1.15 20020520, ATAPI CD/DVD-ROM drive hde: ST340016A, ATA DISK drive hdg: IC35L060AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xd400-0xd407,0xd802 on irq 11 ide3 at 0xdc00-0xdc07,0xe002 on irq 11 hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hdg: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63, UDMA(100) Partition check: /dev/ide/host2/bus0/target0/lun0: [PTBL] [4865/255/63] p1 p2 p5 p6 p7 p8 /dev/ide/host2/bus1/target0/lun0: p1 p2 p5 p6 p7 p8 --- -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] 9b4: lilo doesn't work: solved
Es Dilluns 26 Agost 2002 22:20, en Mike Graham va escriure: On Monday 26 August 2002 01:16 pm, Joan Tur wrote: That happened to me also and I went back into boot config and the entry for hba was unchecked and as soon as i checked it back all worked fine. I've found the solution: lilo.conf's lba option was unchecked... don't know why 8-? I've found the following problem when running lilo: - [root@quinipc etc]# lilo Fatal: geo_comp_addr: Cylinder number is too big (4479 1023) - Won't it be possible to choose what ide drives are to be scsi emulated -in order for them to be used by the recording software- ? Of course it could be under expert mode... I'm wondering that because I was changing my ide DVD to scsi-emulated O8-) Thanks. PD Here's my dmesg output: --- Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio PDC20265: IDE controller on PCI bus 00 dev 80 PCI: Found IRQ 11 for device 00:10.0 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:pio hda: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive hdc: AOPEN CD-RW CRW3248 1.15 20020520, ATAPI CD/DVD-ROM drive hde: ST340016A, ATA DISK drive hdg: IC35L060AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xd400-0xd407,0xd802 on irq 11 ide3 at 0xdc00-0xdc07,0xe002 on irq 11 hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hdg: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63, UDMA(100) Partition check: /dev/ide/host2/bus0/target0/lun0: [PTBL] [4865/255/63] p1 p2 p5 p6 p7 p8 /dev/ide/host2/bus1/target0/lun0: p1 p2 p5 p6 p7 p8 --- -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Beta 4: first impressions
Hallo! I've installed beta 4 and: -driver for my Philips ToUCam Fun webcam was correctly installed under beta 3; under beta 4 it isn't. I've solved it adding modprobe pwc and insmod pwc lines at the end of /etc/rc.d/rc.local -first boot after installation has taken me to a console after having been shown the graphical menu (dm service error ?) -I prefer the old rpmdrake (soft installer) rather to the new one... I'm trying to add a cooker rpms source and I don't have that option available now 8-( -I've installed / in an empty reiserfs partition and kept /home as it was with no problems. Good work ;) That's all for now. -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Latitude CD400 fan
Es Dijous 22 Agost 2002 00:14, en Eugene C. Zesch va escriure: I have Mandrake 8.1 on my CS400XT. It installed beautifully, but seems to run hot. Even during log CPU intensive uses, like long compiles, I have yet to have the fan come on. I won't be worried about that if it doesn't hang up... and you say you compile progs on it, so... ;) -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] processes not stopping, but eating 100% cpu time
Es Dimarts 20 Agost 2002 15:00, en Joan Tur va escriure: Es Dimarts 20 Agost 2002 15:42, en Holger Schurig va escriure: Open a console, su to root, start mc... and then kill the console without having shut down mc. That keeps mc loaded and eating 100% cpu cycles. Tryed under Mandrake 8.2 and Debian Woody... Strange, not on my system. I have a self-compiled KDE 3.0.2, so my console is konsole... It happened in my Mandrake 8.1 and 8.2 boxes... but now I cannot reproduce it under 9 beta 3 (after having send my email!) O8-) I'll reboot to the 8.2 box to check for the packages' versions and will post them here... Ejem... I haven't been able to reproduce the above problem under 8.2 either... I promise I had that problem! I'll be watching for that problem and if it happens again I'll make you know... O8-) -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] processes not stopping, but eating 100% cpu time
Es Dimarts 20 Agost 2002 09:24, en Holger Schurig va escriure: The strange thing: this happens mostly with ncurses-based applications, but not with all. mc, the midnight commander, works very well. Open a console, su to root, start mc... and then kill the console without having shut down mc. That keeps mc loaded and eating 100% cpu cycles. Tryed under Mandrake 8.2 and Debian Woody... -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] processes not stopping, but eating 100% cpu time
Es Dimarts 20 Agost 2002 15:42, en Holger Schurig va escriure: Open a console, su to root, start mc... and then kill the console without having shut down mc. That keeps mc loaded and eating 100% cpu cycles. Tryed under Mandrake 8.2 and Debian Woody... Strange, not on my system. I have a self-compiled KDE 3.0.2, so my console is konsole... It happened in my Mandrake 8.1 and 8.2 boxes... but now I cannot reproduce it under 9 beta 3 (after having send my email!) O8-) I'll reboot to the 8.2 box to check for the packages' versions and will post them here... -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Autoloading a module
Hallo! I've bought a D-Link DWL-650 pcmcia wireless card that's recognized by MDK8.2 and wvlan_cs module is loaded automagically when the card is inserted. But as connection sometimes hangs and I have not been able to use it in ad-hoc mode (only in managed) I'd like to try orinoco and wavelan_cs modules but... What's the easiest way of changing the default module to be loaded when the card is inserted? Should I modify /etc/pcmcia/config ? I've already tryed the following: 1. Card is inserted, 2. ifconfig eth0 down is run, 3. wvlan_cs module is unloaded 4. orinoco (or wavelan_cs) modules are loaded... but then ifconfig eth0 up doesn't work. Help is appreciated. Thanks ;) -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Ide drives take 100% cpu
Hallo! I've posted this problem in newbie's list with no luck. I've got 4 ide controllers, all of them have 1 HD or CD connected as master: DVD: hda, RW: hdc, HD1: hde and HD2: hdg I've got kernel 2.4.18.8.1 installed, and bios recognizes both DVD and RW as DMA. These are set up as scsi-emulated in order for recording programs to see them. But when I'm reading from DVD using xcdroast in order to make a image from which the CDR is going to be burnt it takes 100% cpu cycles (measured using gkrellm). As it's not a laptop that's not a problem... ... but when recording that image the RW again uses 100% cpu but now the PC is almost unusable. Using an Athlon 1.2 and 512Mb DDR it cannot be like that, so I suppose it's ussing polling instead of DMA... am I right? Well, any ideas will be appreciated. Thanks in advance ;) Ah! Here's a piece of the dmesg output: - Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio PDC20265: IDE controller on PCI bus 00 dev 80 PCI: Found IRQ 11 for device 00:10.0 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio hda: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive hdc: AOPEN CD-RW CRW3248 1.12 20020417, ATAPI CD/DVD-ROM drive hde: ST340016A, ATA DISK drive hdg: IC35L060AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xd400-0xd407,0xd802 on irq 11 ide3 at 0xdc00-0xdc07,0xe002 on irq 11 hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hdg: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63, UDMA(100) Partition check: /dev/ide/host2/bus0/target0/lun0: [PTBL] [4865/255/63] p1 p2 p5 p6 p7 p8 /dev/ide/host2/bus1/target0/lun0: p1 p2 p5 p6 p7 p8 ... SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PIONEER Model: DVD-ROM DVD-105 Rev: 1.33 Type: CD-ROM ANSI SCSI revision: 02 Vendor: AOPEN Model: CD-RW CRW3248 Rev: 1.12 Type: CD-ROM ANSI SCSI revision: 02 -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Ide drives take 100% cpu
A few more info: I'm now burning beta 2 isos using gcombust and CPU is no higher than 6 to 10% 8-? The PC hasn't been powered down for 2 days... Thanks. Es Dissabte 03 Agost 2002 12:30, en Joan Tur va escriure: Hallo! I've posted this problem in newbie's list with no luck. I've got 4 ide controllers, all of them have 1 HD or CD connected as master: DVD: hda, RW: hdc, HD1: hde and HD2: hdg I've got kernel 2.4.18.8.1 installed, and bios recognizes both DVD and RW as DMA. These are set up as scsi-emulated in order for recording programs to see them. But when I'm reading from DVD using xcdroast in order to make a image from which the CDR is going to be burnt it takes 100% cpu cycles (measured using gkrellm). As it's not a laptop that's not a problem... ... but when recording that image the RW again uses 100% cpu but now the PC is almost unusable. Using an Athlon 1.2 and 512Mb DDR it cannot be like that, so I suppose it's ussing polling instead of DMA... am I right? Well, any ideas will be appreciated. Thanks in advance ;) Ah! Here's a piece of the dmesg output: - Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio PDC20265: IDE controller on PCI bus 00 dev 80 PCI: Found IRQ 11 for device 00:10.0 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio hda: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive hdc: AOPEN CD-RW CRW3248 1.12 20020417, ATAPI CD/DVD-ROM drive hde: ST340016A, ATA DISK drive hdg: IC35L060AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xd400-0xd407,0xd802 on irq 11 ide3 at 0xdc00-0xdc07,0xe002 on irq 11 hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hdg: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63, UDMA(100) Partition check: /dev/ide/host2/bus0/target0/lun0: [PTBL] [4865/255/63] p1 p2 p5 p6 p7 p8 /dev/ide/host2/bus1/target0/lun0: p1 p2 p5 p6 p7 p8 ... SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PIONEER Model: DVD-ROM DVD-105 Rev: 1.33 Type: CD-ROM ANSI SCSI revision: 02 Vendor: AOPEN Model: CD-RW CRW3248 Rev: 1.12 Type: CD-ROM ANSI SCSI revision: 02 -- Joan Tur. Eivissa-Spain AOL quini2k, ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Graphical login after kde3 upg
Hallo! I've removed Kde 2.2.2 and installed Mandrake's Kde 3.01 (/usr), but I can no longer get to the graphical login. It's trying to get to it continuosly (screen blinks), and I cannot get to a console using ctrl+alt+f1 (or 2, 3, 4). The only thing I can do is to press ctrl+alt+supr and to enter in safe mode - text only. If I start in maintenance mode, normal boot without X I can then use startx with no problem. I've also removed (with --nodeps) kdebase and reinstalled it. I thought that graphical login was in there... 8-? After reboot I've done the same with gnome-core with no luck. Help is appreciated. Here's my /etc/sysconfig/desktop file: DESKTOP=Gnome I've also tryed the following /etc/sysconfig/desktop content: DISPLAYMANAGER=kdm Thanks! ;) -- Joan Tur. Eivissa-Balears AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Using remote x server
Hallo! I'm planning using old computers (P75) as X terminals of a higher-powered server (XP1600+). I'll have 3 clients connected to this server, all of them with 17 monitors. I'd like to find a tutorial for me to be able to do this... where can I find one (or some help)? 8-? Thanks! ;) -- Joan Tur. Eivissa-Balears AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Asus A7S333 mobo supported??
Hallo! I belong to a linux-friendly group who are promoting the use of linux, and we have bought a computer with that mobo in it. And it hangs a few seconds after having started loading linux from CD. We're not sure the mobo is the problem, that's why I'm making that question to you. Ah! The mobo has a SIS745 chipset. Thanks in advance. -- Joan Tur. Eivissa-Balears AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] USB problem
Es Dissabte 08 Juny 2002 03:04, en Phil va escriure: Hello All, Forgive me for asking this question yet again; there must be an answer, surely. My Kodak DC3400 camera is auto-detected by gphoto2 correctly as being connected to the USB port. Yet when I try to use the camera an error message tells me that the USB port is busy. Try to use it as root. If that works you have to add your user to the usb group, log out and log in and try again... If it doesn't I suggest you to visit www.gphoto.net and join their mailing list. -- Joan Tur. Eivissa-Balears AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] mkd 8.1 crash after last update!
Es Dissabte 08 Juny 2002 22:07, en Ricardo Castanho de O. Freitas va escriure: Now what? I've just update through Mdk control center and after that my mdk8.1 started hate being alone!?! It crashes!! When I return to my desk it has just rebooted!!! Seems to be power saving or something alike ... screen salver (with lock!). I'm using mdk8.1 with kde3 with all updates. Check using kcontrol - Power control - Laptop power control not to have it set to suspend or standby the computer. Maybe that works... -- Joan Tur. Eivissa-Balears AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] ssh and X
Hallo! After having logged in my remote computer via ssh I can run text based programs but I get Remote host denied X11 forwarding when trying to run graphical apps... Any idea?? 8-? Thanks! -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ssh and X
Es Dissabte 18 Maig 2002 15:04, en [EMAIL PROTECTED] va escriure: On Sat, 18 May 2002, Joan Tur wrote: Hallo! After having logged in my remote computer via ssh I can run text based programs but I get Remote host denied X11 forwarding when trying to run graphical apps... Look for the system sshd_config file, usually located in /etc/ssh/sshd_config. Make sure that you see: X11Forwarding yes That file didn't exist in the directory, so now it's working. Thanks!! ;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Some advices on saving battery on a LAPTOP
Es Dimecres 01 Maig 2002 19:45, en Eduardo M. A. M. Mendes va escriure: I have 8.2 running on my Sony vaio notebook but the battery only runs for 25 minutes (it runs for more than one hour with XP). Could someone advise me on how to set up the configuration so as to save energy as much as possible? Strange thing... now I've got a HP OB6000 and before I had an Ahead laptop, and on both mandrake run for about half an hour longer than using windows... Is apmd installed and running (check that using drakxservices for instance)? Maybe there's a application that's using more cpu time than expected (check that using gkrellm)... Hope that helps ;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Options in kmail
Hallo! I've created a filter in kmail for outgoing messages in order to move them to a specific folder, but when I have a look at any message in this folder I get sender info instead of destination-of-that-email info (I'm always the sender) 8-( Any idea?? Thanks! ;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] netscape 6.2 where?
Es Dilluns 22 Abril 2002 21:38, en [EMAIL PROTECTED] va escriure: I have downloaded from MandrakeClub the rpm of netscape 6.2; but after install it without problems I can't know how to run it; not nescape command or similar avalaible. Do I need any additional installation? I haven't (yet) downloaded nor installed it but you can know what files it's got in the rpm using rpmdrake. Try that ;) Francisco Alcaraz Murcia (Spain) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re:[expert] netscape 6.2 where? solved
Es Dilluns 22 Abril 2002 23:18, en [EMAIL PROTECTED] va escriure: Thanks Joan, The activation is in /usr/bin/install-netscape-for-all ^_^ But... Some more information about this activation should be necessary. Glad to read It's worked for you ;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] How to print to pdf ?!
Hallo! I need to print from openoffice to a pdf file but I cannot set pdf pseudo-printer to be the default one... any idea?? THANKS!;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] How to print to pdf ?!
Es Dijous 11 Abril 2002 13:50, en Joan Tur va escriure: I need to print from openoffice to a pdf file but I cannot set pdf pseudo-printer to be the default one... any idea?? Now I've found the print to file option, then I've choosen to PDF and printed to file... But the PDF I get is wrong. I cannot open it with xpdf nor Adobe Acrobat Reader 5 (for windows) 8-? Thanks in advance. -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Quake3 on 8.2?
Es Dijous 28 Març 2002 20:56, en [EMAIL PROTECTED] va escriure: - R_Init - ...loading libGL.so: QGL_Init: Can't load libGL.so from /etc/ld.so.conf I've done a search using rpmdrake and i've found the following rpms to contain that library: libMesaGL1 lsbdev XFree86-devel XFree86-libs Maybe installing the first one could help? 8-? -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Quake3 on 8.2: NOW RUNING
Es Divendres 29 Març 2002 12:06, en [EMAIL PROTECTED] va escriure: Thanks a lot Joan De nada ;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] auto login on 8.2
Es Dimecres 27 Març 2002 04:35, en Dodd, David J va escriure: I have just loaded 8.2 and so far it is working, got my orinoco card to work without a hitch. One question though maybe I did this on installation but when I boot up it auto logs into my user directory. How do I change this so it will ask for a password. I looked in userdrake and could not find it, is there anyway to change this in terminal or do I use one of the gooie interface. In Mandrake control center, start (translated from spanish!), start options you can choose that. Also if security level is not set to lowest (in 8.2 called standard) you won't be able to boot x as a default user ;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Opera on Mandrake 8.2
Es Dimarts 26 Març 2002 17:54, en Dany Allard va escriure: A quick question, has anyone got Opera 6.0b1 to work on Mandrake 8.2? I've downloaded it from MandrakeClub and that one works. Note that to dw some programs you need to be silver member... (not opera) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Continious Download
Es Domingo 10 Marzo 2002 13:02, Wolfgang Bornath va escriure: On Sun, Mar 10, 2002 at 21:25 +1100, Hari Yellina wrote: Hi, I am trying to find a application where, I can download even once I got diconnected and starts once I resume my internet connection. In Linux most FTP apps do that. A well known for this is wget. It's part of most distributions (of course in Mandrake too) and easy to use. Try nt (webdownloader for x)... you'll find it in the installation cds... -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] try agp_try_unsupported=1 ?
Es Thu 07 Feb 2002 09:25, en Hoyt Duff va escriure: I have the following messages in the syslog: Feb 7 02:52:13 marvin kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Feb 7 02:52:13 marvin kernel: agpgart: Maximum main memory to use for agp memory: 691M Feb 7 02:52:13 marvin kernel: agpgart: Unsupported AMD chipset (device id: 700e), you might want to try agp_try_unsupported=1. Feb 7 02:52:13 marvin kernel: agpgart: no supported devices found. My question is, I . . . might want to try agp_try_unsupported=1 where, exactly? Try upgrading to a newer kernel... it isn't supported in 8.1's default kernel... Thanks Hoyt -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] HDPARM in 8.2Beta
Es Thu 07 Feb 2002 02:08, en [EMAIL PROTECTED] va escriure: Thanks for the replies re: PCAnywhere. Will check out Wine and see if it works. Next question: I just installed 8.2beta on a machine. Where is HDPARM? Isn't that a program that comes with the kernel? It isn't installed by default. Install it. -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Euro problem
Es Dilluns 28 Gener 2002 11:37, en Leopold Palomo Avellaneda va escriure: I use kde 2.2.1 and I have selected in control panel the iso8859-15 charset, and well, I'm not be able to write a ¤ with the altgr+E keys. Neither using kate, kwrite, konsole, etc. So, well. I don't know waht to do. Maybe is something about the spanish keyboard, or similar, but ... I don't know what to do ... I'm able to have the Euro symbol everywhere but kmail !! 8-O I've tryed in a console, opera, galeon... Here's my /etc/sysconfig/i18n : [quini@quinipc quini]$ cat /etc/sysconfig/i18n SYSFONT=lat0-sun16 LC_CTYPE=es_ES@euro LC_MONETARY=es_ES@euro LANGUAGE=es_ES.ISO-8859-15 LC_TIME=es_ES@euro LC_NUMERIC=es_ES@euro LC_COLLATE=es_ES@euro LC_MESSAGES=es_ES@euro LANG=es_ES.ISO-8859-15 SYSFONTACM=iso15 Ah! I've forgotten to mention that i can also print it... -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Supermount
Es Dissabte 26 Gener 2002 00:41, en Praedor Tempus va escriure: I have kernel-2.4.17 and have tried activating supermount. I did supermount -i enable and then edited fstab to be correct - it has entries identical to yours. I stick a floppy in and try to view it and...pop, only root can mount it. I did the same: i installed 2.4.17-8, ran supermount -i enable and it works fine for me. Here you have my /etc/fstab [quini@quinipc video_ts]$ cat /etc/fstab /dev/sdb6 / reiserfs notail 1 1 none /dev/pts devpts mode=0620 0 0 none /dev/shm tmpfs defaults 0 0 /dev/sda1 /home reiserfs defaults 1 2 /dev/hda8 /mnt/bkp reiserfs notail 1 2 none/mnt/cdrom supermount fs=auto,dev=/dev/scd1,--,ro,nosuid,iocharset=iso8859-15,nodev,codepage=850,exec 0 0 none/mnt/cdrom2 supermount fs=auto,dev=/dev/scd0,--,ro,nosuid,iocharset=iso8859-15,nodev,codepage=850,exec 0 0 none/mnt/floppy supermount fs=auto,dev=/dev/fd0,--,nosuid,iocharset=iso8859-15,nodev,codepage=850,exec 0 0 /dev/hda7 /mnt/proves_linux reiserfs notail 1 2 /dev/hda1 /mnt/win vfat user,exec,rw,dev,suid,umask=0,iocharset=iso8859-15,codepage=850 0 0 /dev/hda5 /mnt/win2 vfat user,exec,rw,dev,suid,umask=0,iocharset=iso8859-15,codepage=850 0 0 none /proc proc defaults 0 0 /dev/sdb5 swap swap defaults 0 0 /dev/hda6 swap swap defaults 0 0 -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Where to find kernel?
Es Dimecres 23 Gener 2002 22:40, en H. McM va escriure: Need to go to a cooker download site. Most current is 2.4.17.8 Thanks. Why has it been removed from rpmfind.net ?? 8-? -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Where to find kernel?
Hallo! I used to dl kernel rpms from rpmfind but now there's no kernel for mandrake over 2.4.8 (i'm searching kernel) 8-? Thanks! -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] slow disk...
Es Dissabte 19 Gener 2002 22:09, en tal amir va escriure: /dev/hdb: Timing buffered disk reads: 64 MB in 15.55 seconds = 4.12 MB/sec [root@whatsup home]# hdparm -t /dev/hdc Mine is a 7200 rpm 40Gb Seagate ST340016A: [root@quinipc quini]# hdparm /dev/hda /dev/hda: multcount= 16 (on) I/O support = 1 (32-bit) unmaskirq= 1 (on) using_dma= 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 4865/255/63, sectors = 78165360, start = 0 [root@quinipc quini]# hdparm -tT /dev/hda /dev/hda: Timing buffer-cache reads: 128 MB in 0.67 seconds =191.04 MB/sec Timing buffered disk reads: 64 MB in 2.65 seconds = 24.15 MB/sec Are the settings for that hd like mine? You can play with this 8-? -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] slow disk...
Es Dissabte 19 Gener 2002 23:40, en tal amir va escriure: all but unmaskirq L [root@whatsup tal]# hdparm /dev/hdb /dev/hdb: multcount= 16 (on) I/O support = 1 (32-bit) unmaskirq= 0 (off) using_dma= 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 3649/255/63, sectors = 58633344, start = 0 [root@whatsup tal]# how do i change that ? hdparm does not say how. -u get/set unmaskirq flag (0/1) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] SIS630 mobo chipset...
Hallo! Does any of you have that mobo chipset in your laptop? It's got linux drivers for it at the following address (vga and lan): http://www.sis.com/support/driver/linux.htm If you've got a laptop with it: how is it performing? Is the video card able of playing 3D games as well?? Is it hard to install Linux on it? Thanks in advance! ;) -- Bon Nadal i feliç any nou !! Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Promise Fastrak 100 lite - anyone?
Es Dilluns 26 Novembre 2001 21:02, en Wolfgang Bornath va escriure: a german user asks if there is anyone using the promise fastrak 100 lite raid controller which is onboard a MSI K7 mobo. He has a raid of 2 Maxtor 40GByte hds and wants to switch to Mandrake Linux if this raid is supported. Hallo! My brother is using a MB with that controller using Grub as boot manager with no problems. But he's got 1 HD only... Hope that helps -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] https sites not working fine...
Hallo again! I've got the SSL site from my bank working... using wine to run win version of NS 4.78... at least i don't have to boot win to do that 8-/ Es Diumenge 25 Novembre 2001 12:22, en Joan Tur va escriure: Hallo! I need to be able to connect to my bank at www.lineaabierta.com (spanish La Caixa savings Bank). No browser works fine... all of them fail at any point. And i've tryed Netscape 6.2, Mozilla 0.9.5-2 ( Galeon), Konqueror (MDK 8.1 version), Opera 5, Opera 5.05b, Netscape 4.78... Any help is welcome!! ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] https sites not working fine...
Hallo! I need to be able to connect to my bank at www.lineaabierta.com (spanish La Caixa savings Bank). No browser works fine... all of them fail at any point. And i've tryed Netscape 6.2, Mozilla 0.9.5-2 ( Galeon), Konqueror (MDK 8.1 version), Opera 5, Opera 5.05b, Netscape 4.78... Any help is welcome!! ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] https sites not working fine...
Es Diumenge 25 Novembre 2001 14:02, en Tom Badran va escriure: And i've tryed Netscape 6.2, Mozilla 0.9.5-2 ( Galeon), Konqueror (MDK 8.1 version), Opera 5, Opera 5.05b, Netscape 4.78... Are you sure openssl is installed? Do you mean the following rpms? [root@quinipc quini]# rpm -qa|grep ssl libopenssl0-0.9.6b-1mdk openssl-0.9.6b-1mdk Also try changin your browser identification to (i hate to say it) internet explorer as your bank might be blocking other browsers. I also hate that. I've already sent a message to the bank with no answer (1-2 days)... i've found i can make konqueror identify itself as IE but it hasn't worked. I've also tryed that option with Opera with no luck... And i haven't found that option in Mozilla or NS6.2... 8-? Anyway thanks for your answer ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] https sites not working fine...
Es Diumenge 25 Novembre 2001 17:42, en SI Reasoning va escriure: try taking the source of mozilla 9.6 and galeon 0.12-8 from cooker and re-compile. I did this for galeon and it is running much more stable. Do you think that can help? What can be the difference between precompiled an own-compiled versions?? 8-? Thanks for your answer ! ;) --- Joan Tur [EMAIL PROTECTED] wrote: Hallo! I need to be able to connect to my bank at www.lineaabierta.com (spanish La Caixa savings Bank). No browser works fine... all of them fail at any point. And i've tryed Netscape 6.2, Mozilla 0.9.5-2 ( Galeon), Konqueror (MDK 8.1 version), Opera 5, Opera 5.05b, Netscape 4.78... Any help is welcome!! ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com = SI Reasoning [EMAIL PROTECTED] They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Benjamin Franklin __ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Nec 7700A CDRW
Es Dimecres 21 Novembre 2001 21:52, en Tom Badran va escriure: On Wednesday 21 Nov 2001 8:46 pm, you wrote: Hallo! I've selected 10x to burn 530Mb to a 10x compatible RW and it has took 11'36 ... That's about 4x??!! Does any of you have this writer? Is it working fine? Thanks!! ;) What software did you use? If command line what are EXACTLY the options that you used? I've used xcdroast that comes with MDK8.1... i just have auto at CDRW settings and i had selected 10x as the burning speed... Thanks! ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Nec 7700A CDRW
Hallo! I've selected 10x to burn 530Mb to a 10x compatible RW and it has took 11'36 ... That's about 4x??!! Does any of you have this writer? Is it working fine? Thanks!! ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Pcmcia ethernet card problem
Hallo! I have a D-Link DFE-680TX fast ethernet pcmcia card; it was working fine under 8.1 connected to a 10 Mb hub. But now it is connected to a 100 Mb switch and samba connection or internet connection hang immediately. And it is working fine under WinME 8-( It's using tulip_cb module. It seems to have installed fine (ifconfig shows eth0 with it's IP address) but when i try to transfer something connection hangs. I have to pull it out and plug it in again... Thanks! -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Solved: unsupported Via chipset
Hallo again! Thanks to Robert Love i've found the solution. Support for AMD 761 chipset is included since kernel 2.4.10 so... ;) And thanks to all of you who have helped me! -- Joan Tur. Ibiza - Spain [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Reading from DMA Atapi DVD takes 90% CPU
Hallo! I'm using a Pioneer 16x Atapi DVD. It takes up to 90% cpu time when running and i don't know if it is normal or not... It's alone in the ide1 channel and dmesg shows it's using DMA: -- VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio hda: ST340016A, ATA DISK drive hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive -- Thanks!! -- Joan Tur. Ibiza - Spain [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Reading from DMA Atapi DVD takes 90% CPU
Hallo! I'm using a Pioneer 16x Atapi DVD. It takes up to 90% cpu time when running and i don't know if it is normal or not... It's alone in the ide1 channel and dmesg shows it's using DMA: -- VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio hda: ST340016A, ATA DISK drive hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive -- Thanks!! -- Joan Tur. Ibiza - Spain [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Unsupported Via chipset ?
Hallo! I'm running MDK8.1 on an Athlon 1200 and Gigabyte GA-7DXR mobo (Amd 761 chipset); as i'm having problems with 3D acceleration i've checked and i get the following error: -- Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M agpgart: Unsupported AMD chipset (device id: 700e), you might want to try agp_try_unsupported=1. agpgart: no supported devices found. [drm] Initialized radeon 1.1.1 20010405 on minor 0 -- Can any of you help me? I'd like to be able to use only linux as possible... thanks!! ;) -- Joan Tur. Ibiza - Spain [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com