[Fink-users] Beware of premature notices Re: Fink is dead.
The CVS was announced as being online again this morning australian time (i.e. yesterday in the US). I tried it and it reset my connection eventually because I was going too slowly :( I suspect other people will want to be wworking on it, so it might be busier than normal for alittle while. (I don't know how long that will last or whether it will be noticeable)... cheers chaals On Fri, 17 Jan 2003, lenny bruce wrote: On Wednesday, January 15, 2003, at 08:34 PM, Charles McCathieNevile wrote: yep. everyone. It isn't talking at the moment, please be patient. On Wed, 15 Jan 2003, R. A. Hettinga wrote: su rah -c 'cvs -z3 update -d -P' cvs [update aborted]: connect to cvs.sourceforge.net:2401 failed: Connection refused ### execution of su failed, exit code 1 Failed: Updating using CVS failed. Check the error messages above. http://sourceforge.net/docman/display_doc.php?docid=2352group_id=1 (2003-01-14 14:04:19 -Project CVS Services) As of 2003-01-14, pserver-based CVS repository access and ViewCVS (web based) CVS repository access have been taken offline as to stabilize CVS server performance for developers. These services will be re-enabled as soon as the underlying scalability issues have been analyzed and resolved (as soon as 2003-01-15, if possible). Additional updates will be posted to the Site Status page as they become available. Your patience is appreciated. Fink is dead. It doesn't sound like they're turning it back on anytime soon... lenny bruceI am not a comedian, [EMAIL PROTECTED] I am Lenny Bruce. -- Charles McCathieNevile http://www.w3.org/People/Charles tel: +61 409 134 136 SWAD-E http://www.w3.org/2001/sw/Europe fax(france): +33 4 92 38 78 22 Post: 21 Mitchell street, FOOTSCRAY Vic 3011, Australiaor W3C, 2004 Route des Lucioles, 06902 Sophia Antipolis Cedex, France --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Beware of premature notices Re: Fink is dead.
From the SourceForge Status Page: (2003-01-17 12:27:38) As of the morning of 2003-01-17, project CVS services have been restored (pserver-based CVS repository access and ViewCVS (web-based) repository access had previously been offline). A new limit has been established as (sic) that no more than two pserver connections will be permitted at a time, per IP address; this change has been made to ensure stability of developer CVS access as we work to complete our scalability changes. Additional scalability enhancements, including adjustments to our per-IP connection limits, (to further improve CVS performance, both for developer access and pserver-based access) will likely be introduced during the next two weeks (watch this status page for details). The site is dramatically slower since it came back online. I'm going to be watching what they do with great curiosity as CVS is not the most efficient server ever written. On Saturday, January 18, 2003, at 12:34 AM, Charles McCathieNevile wrote: The CVS was announced as being online again this morning australian time (i.e. yesterday in the US). I tried it and it reset my connection eventually because I was going too slowly :( I suspect other people will want to be wworking on it, so it might be busier than normal for alittle while. (I don't know how long that will last or whether it will be noticeable)... cheers chaals On Fri, 17 Jan 2003, lenny bruce wrote: On Wednesday, January 15, 2003, at 08:34 PM, Charles McCathieNevile wrote: yep. everyone. It isn't talking at the moment, please be patient. On Wed, 15 Jan 2003, R. A. Hettinga wrote: su rah -c 'cvs -z3 update -d -P' cvs [update aborted]: connect to cvs.sourceforge.net:2401 failed: Connection refused ### execution of su failed, exit code 1 Failed: Updating using CVS failed. Check the error messages above. http://sourceforge.net/docman/display_doc.php?docid=2352group_id=1 (2003-01-14 14:04:19 -Project CVS Services) As of 2003-01-14, pserver-based CVS repository access and ViewCVS (web based) CVS repository access have been taken offline as to stabilize CVS server performance for developers. These services will be re-enabled as soon as the underlying scalability issues have been analyzed and resolved (as soon as 2003-01-15, if possible). Additional updates will be posted to the Site Status page as they become available. Your patience is appreciated. Fink is dead. It doesn't sound like they're turning it back on anytime soon... lenny bruceI am not a comedian, [EMAIL PROTECTED] I am Lenny Bruce. -- Charles McCathieNevile http://www.w3.org/People/Charles tel: +61 409 134 136 SWAD-E http://www.w3.org/2001/sw/Europe fax(france): +33 4 92 38 78 22 Post: 21 Mitchell street, FOOTSCRAY Vic 3011, Australiaor W3C, 2004 Route des Lucioles, 06902 Sophia Antipolis Cedex, France --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] perl and fink
Hi Folks, Like a lot of folks i may have been rather foolish in upgrading the perl installation to .80. The only real problem i have had thus far has ben with doing fink list when i get the following: dyld: perl Undefined symbols: _Perl_sv_2pv _perl_get_sv Trace/BPT trap I did the following commands as had been suggested: mv /sw/lib/perl5/darwin/Storable.pm /tmp mv /sw/lib/perl5/darwin/auto/Storable /tmp fink rebuild storable-pm which seemed to have worked ok. Oh and i've put: setenv LC_ALL C in the .cshrc and .tcshrc files. Any other suggestions? Gary _ The difficulty now is that unexceptional adults believe the loss of youthful dreaming is itself growing up, as though adulthood were the passive conclusion to a doomed activity and hope during adolescence. The Uses of Disorder Personal Identity and City Life -- Richard Sennett OO [_]| /|\ Gary Elshaw Film and Media Studies Tutor Victoria University New Zealand http://callenshostis.no-ip.org http://elshaw.tripod.com/ _ --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Compile problems and gcc_select
I (and others) have posted requests for help that included error messages like the following: __Unwind_Resume __Unwind_GetDataRelBase __Unwind_GetIP __Unwind_GetLanguageSpecificData __Unwind_GetRegionStart __Unwind_GetTextRelBase __Unwind_SetGR __Unwind_SetIP __Unwind_DeleteException __Unwind_RaiseException While looking at some non-Fink C++ code I got the same error! What should gcc_select choose for Fink builds? 2 or 3? Can someone smart help? _ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE* http://join.msn.com/?page=features/virus --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Mutt and URL's in e-mail: how to launch an aqua browser?
Url view just extracts and presents all the urls in a list when you hit ctrl-b. It doesn't decide what to do with them. I would love to see Launch an example of a .muttrc using Launch as I'm not quite sure how it would work. Actually, I believe I need to do a major mutt reconfiguration because now I'm almost alway using it in an X window and never the old terminal window so all the X apps should be accessible as well as others. I just start it up with xterm -fn 12x24 -sb -sl 1000 -e mutt I use Mutt with Mac OS X as well as some Linux machines. I tried once about a year ago to install urlview on MacO S X; I was unsuccessful. I have been viewing html with w3m, a test viewer using a suggestion I saw on this list of putting text/html; w3m -dump -T text/html %s; copiousoutput in my .mailcap and having auto_view text/html in my .muttrc This is adequate to see the html mail before trashing it. I'd prefer to have html message show up in the list of attachments with the option of viewing it, in a more recent browser or a different browser. For whatever reason the links are never quite live with w3m. I'd also like to get either antiword or OpenOffice linked to handle the odd word or excel document.And actually I'd like my choice of browsers since some attachments are really text and w3m or lynx is easy. And every now and then, say once a month, I get an actually full blow html message I might want to look at. On Fri, Jan 17, 2003 at 03:46:42PM +0100, Max Horn wrote: At 8:05 Uhr -0500 17.01.2003, Gregory Seidman wrote: Adrian Simmons sez: [snip] Mutt depends upon urlview to find URLs in a mail message and launch them. Urlview uses a .urlview file to decide what pattern should match an URL and what command should be run to launch it. My .urlview file looks like this on a (non-MacOS) unix system: EXPERT REGEXP ht|f)tp)|https|file|mailto):(//)?[^ ]*|www.[-a-z0-9.]+)[^ .,;] COMMAND remotens '%s' [snip] As an enhancment to this, I would strongly suggest to install the launch package which is superior to Apple's open command in every regard. To open URLs with it, you can do launch -l http://bla.com;, so the above COMMAND probably would become COMMAND launch -l '%s' -- Josh Kuperman [EMAIL PROTECTED] --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Compile problems and gcc_select
Do you have any packages installed from GNU-Darwin? -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Sat, 18 Jan 2003, Isreal Packard wrote: I (and others) have posted requests for help that included error messages like the following: __Unwind_Resume __Unwind_GetDataRelBase __Unwind_GetIP __Unwind_GetLanguageSpecificData __Unwind_GetRegionStart __Unwind_GetTextRelBase __Unwind_SetGR __Unwind_SetIP __Unwind_DeleteException __Unwind_RaiseException While looking at some non-Fink C++ code I got the same error! What should gcc_select choose for Fink builds? 2 or 3? Can someone smart help? _ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE* http://join.msn.com/?page=features/virus --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] why does xmms not produce sound in Apple's X11 ?
Set the path in the menu to /sw/bin/xmms ... You may have to start esd before though just to be sure. xterm -e esd xmms would be the command to enter in the applications menu to launch xmms. Chaos is freedom! --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Compile problems and gcc_select
Alexander Hansen wrote: Do you have any packages installed from GNU-Darwin? [] More specifically, do you have anything called libgcc.dylib sitting around, in /usr/local/lib perhaps? On Sat, 18 Jan 2003, Isreal Packard wrote: I (and others) have posted requests for help that included error messages like the following: __Unwind_Resume Unfortunately, none of those who posted this before have answered questions about what they have in their /usr/local. And before you, none even bothered to tell which dev tools they had installed, or whether the problem disappeared afterwards. Hard to find the error in this situation. -- Martin --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Mouse key mapping
Hi! I recently switched to a new Mac (two processors, lots of memory etc, yumm!) and decided to start out fresh with a clean disk and a clean fink installation - just completed. Again thanks to everone involved in the fink project!!! However, I'm running into a little snag with X11, and while I realise that this might not be the best forum for asking about this, perhaps someone either has an idea of how to solve the problem or can direct me to the right place. The problem simply is this, rather than the ordinary Mac one-button mouse I'd like to install the one Microsoft product I've found worthwhile; their Explorer trackball. It's got five buttons, a scrollwheel and nicely positioned and sized ball. However, Apple X11 only recognises two of the five buttons. So I installed the XFree86 software with fink. This version sees the buttons all right, but I can't seem to find a way of configuring the device. I'd like to map number five and four to numbers three and two respectively, get rid of the button function in the scroll wheel etc. In short, make the behaviour be just as on my Linux box. This takes some contortions in the XF86Config file, but here it seems as if that file is entirely lacking. Does anyone have any idea of how to fix this? Rergards, Ronny Wikh --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Mutt and URL's in e-mail: how to launch an aqua browser?
On Sat, Jan 18, 2003 at 11:11:16AM -0500, Josh Kuperman wrote: Url view just extracts and presents all the urls in a list when you hit ctrl-b. It doesn't decide what to do with them. I would love to see Launch an example of a .muttrc using Launch as I'm not quite sure how it would work. Sure it does, see man urlview, The lines people were quoting (REGEXP, COMMAND) go into ~/.urlview. I use Mutt with Mac OS X as well as some Linux machines. I tried once about a year ago to install urlview on MacO S X; I was unsuccessful. I have been viewing html with w3m, a test viewer using a suggestion I saw on this list of putting text/html; w3m -dump -T text/html %s; copiousoutput in my .mailcap and having auto_view text/html in my .muttrc This causes the message to be displayed inline. To get it to display in w3m otherwise, do this in .mailcap: text/html; w3m -T text/html %s; needsterminal; description=HTML Text; nametemplate=%s.html text/html; w3m -T text/html -dump %s; copiousoutput; description=HTML Text; nametemplate=%s.html That way w3m renders with -dump inline and also will display fullscreen from the attachment list. You could replace 'w3m' in the first line with a script which allowed you to choose a browser. I don't run Mutt on OS X so I always use w3m. On OS X I have a script which checks whether I'm logged in from the console and uses w3m or launch (which I wrote, so I guess I'm a bit biased :) alternately. -- =Nicholas Riley [EMAIL PROTECTED] | http://www.uiuc.edu/ph/www/njriley Pablo Research Group, Department of Computer Science and Medical Scholars Program, University of Illinois at Urbana-Champaign --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] problem compiling arts
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'm getting the following error while installing arts from source: Good - your configure finished. Start make now cat: /tmp/kde-build-options: No such file or directory /var/tmp/tmp.0.BTjyZb: --with-xinerama: command not found ### execution of /var/tmp/tmp.0.BTjyZb failed, exit code 1 Failed: compiling arts-1.1.0-9 failed Any ideas? - - Robert Wolfgang Rumpf, Ph.D. Bioinformaticist Director of Product Development Rescentris, Ltd. PGP public encryption key available at www.keyserver.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (Darwin) iD8DBQE+KaYKJtI+DZudABYRArnRAJwLFQayTiGzbC6dECQzbeafWuLGNgCgkVFI v05Jyl15RoIVCAryDKfhswM= =H0iM -END PGP SIGNATURE- --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Problem installing kpovmodeler
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Another problem, this time while trying to install kpovmodeler from cvs source: pkg kpovmodeler version ### pkg kpovmodeler version 3.1-1 WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) - - Robert Wolfgang Rumpf, Ph.D. Bioinformaticist Director of Product Development Rescentris, Ltd. PGP public encryption key available at www.keyserver.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (Darwin) iD8DBQE+KabnJtI+DZudABYRAolgAKDtAPbCpZjumCrHnbn1UYgqMbLmPgCgjTMu 4xZmKCPWuBow4jj48EU/+e4= =F5fw -END PGP SIGNATURE- --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
Wolfgang Rumpf wrote: [] WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Same problem as the other one. Selfupdate. -- Martin --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
On Saturday, January 18, 2003, at 02:11 PM, Wolfgang Rumpf wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Another problem, this time while trying to install kpovmodeler from cvs source: pkg kpovmodeler version ### pkg kpovmodeler version 3.1-1 WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) do fink selfupdate-cvs again...i had to use pico to change some builddepends and it split some of the long lines, even with -w... --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
On 1/18/03 2:11 PM, Wolfgang Rumpf [EMAIL PROTECTED] wrote: Another problem, this time while trying to install kpovmodeler from cvs source: pkg kpovmodeler version ### pkg kpovmodeler version 3.1-1 WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) I get this when doing fink update-all: [Watzman-iMac:~] josh% fink selfupdate-cvs [completes successfully] [Watzman-iMac:~] josh% fink update-all sudo /sw/bin/fink update-all Information about 2104 packages read in 2 seconds. [long list of packages] fink needs help picking an alternative to satisfy a virtual dependency. The candidates: (1) kdelibs3-ssl-dev: KDE - essential development libraries and headers (2) kdelibs3-dev: KDE - essential development libraries and headers Pick one: [1] fink needs help picking an alternative to satisfy a virtual dependency. The candidates: (1) kdebase3-ssl-dev: KDE - base development headers and libraries (2) kdebase3-dev: KDE - base development headers and libraries Pick one: [1] fink needs help picking an alternative to satisfy a virtual dependency. The candidates: (1) openslp-ssl-dev: Development files for %N (2) openslp-dev: Development files for OpenSLP Pick one: [1] fink needs help picking an alternative to satisfy a virtual dependency. The candidates: (1) openslp-ssl-shlibs: Shared Libraries for OpenSLP + SSL Support (2) openslp-shlibs: Shared Libraries for OpenSLP Pick one: [1] WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) [Watzman-iMac:~] josh% I should note that I have the non-ssl version of KDE installed, and have not tried telling Fink to update to the non-ssl version (as I want ssl anyways). --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Apple's X11 and OpenGL
Hi I have probably the same problem: Am Samstag, 18.01.03, um 19:18 Uhr (Europe/Zurich) schrieb [EMAIL PROTECTED]: Ok, when I installed Apple's X11 I was in the process of installing qt3, which I postponed until after receiving the new xfree86 dealie from Apple. I'm pretty sure that I bork'd OpenGL. When I try to install qt3 (through fink), it chokes on the linking stage. It has several pages worth of unresolved symbols. Most of which refer to OpenGL commands. The few unresolved symbols which aren't directly from OpenGL, are from CGL (Carbon GL?), and xp (which I'm unfamiliar with). I tried reinstalling X11 a few times, since I think it comes with OpenGL, but it hasn't seemed to help. I noticed that one or two other programs I've tried to build against X11's GL seem to have the same unresolved symbol issue. What am I missing/doing wrong? I can't start Apples X11. It crashes immediately with the following error messages in the console: dyld: /Applications/X11.app/Contents/MacOS/X11 Undefined symbols: /Applications/X11.app/Contents/MacOS/X11 undefined reference to _CGLSetCurrentContext expected to be defined in OpenGL /Applications/X11.app/Contents/MacOS/X11 undefined reference to _glAccum expected to be defined in OpenGL /Applications/X11.app/Contents/MacOS/X11 undefined reference to _glActiveTextureARB expected to be defined in OpenGL /Applications/X11.app/Contents/MacOS/X11 undefined reference to _glAlphaFunc expected to be defined in OpenGL /Applications/X11.app/Contents/MacOS/X11 undefined reference to _glAreTexturesResident expected to be defined in OpenGL /Applications/X11.app/Contents/MacOS/X11 undefined reference to _glBegin expected to be defined in OpenGL /Applications/X11.app/Contents/MacOS/X11 undefined reference to _glBindTexture expected to be defined in OpenGL /Applications/X11.app/Contents/MacOS/X11 undefined reference to _glBitmap expected to be defined in OpenGL I don't know what the problem is. I tried several things to solve the problem. I also reinstalled the OpenGL.framework from the 10.2.3 update. But nothing helped. At my place, it appeared after having installed OpenOffice. Has anybody an idea, what I could do? Thanks! Phil --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Prebuilt package ATLAS for iMac G3 600mhz
Hi, Is there a Prebuilt package ATLAS for iMac G3 600Mhz available ? _ The new MSN 8 is here: Try it free* for 2 months http://join.msn.com/?page=dept/dialup --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Pb with pkgconfig and intltool?
On Sat, 18 Jan 2003, [ISO-8859-1] Michèle Garoche wrote: I've just run fink selfupdate-cvs, there were 2 packages to update pkgconfig and intltool. They compiled and installed, but I've got the following warnings, maybe it's not a problem, but I don't know: For intltool-0.23: . checking for working automake-1.4... missing ... Strange I have those ones installed: i automake 1.6.3-2 Upgrade package - automake1.6 i automake1.6 1.6.3-1 Tool for generating GNU Standards-complia. You can remove automake-1.6.3-2, because it's a dummy package. Try installing For pkgconfig-0.15.0 Same as above with automake Plus: ... ranlib .libs/libglib.al creating libglib.la (cd .libs rm -f libglib.la ln -s ../libglib.la libglib.la) gcc -DHAVE_CONFIG_H -I. -I. -I. -DG_LOG_DOMAIN=g_log_domain_glib -no-cpp-precomp -I/sw/include -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -c testglib.c testglib.c: In function `g_node_test': testglib.c:86: warning: reading through null pointer (arg 5) ... (a bunch of lines like this) ranlib .libs/libgthread.al creating libgthread.la (cd .libs rm -f libgthread.la ln -s ../libgthread.la libgthread.la) gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../gthread -DG_LOG_DOMAIN=\GThread\ -no-cpp-precomp -I/sw/include -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -c testgthread.c In file included from testgthread.c:6: ../testglib.c: In function `g_node_test': ../testglib.c:86: warning: reading through null pointer (arg 5) idem /bin/sh ../libtool --mode=link gcc -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -L/sw/lib -o list-test list-test.o ../libglib.la gcc -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -L/sw/lib -o list-test list-test.o ../.libs/libglib.al gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -no-cpp-precomp -I/sw/include -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -c node-test.c node-test.c: In function `g_node_test': node-test.c:99: warning: reading through null pointer (arg 5) . idem Is something wrong here? Michèle http://micmacfr.homeunix.org/ -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Pb with pkgconfig and intltool?
I sent a couple of incomplete messages, because I hit the wrong key in pine! Anyway.. -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Sat, 18 Jan 2003, Alexander Hansen wrote: On Sat, 18 Jan 2003, [ISO-8859-1] Michèle Garoche wrote: I've just run fink selfupdate-cvs, there were 2 packages to update pkgconfig and intltool. They compiled and installed, but I've got the following warnings, maybe it's not a problem, but I don't know: For intltool-0.23: . checking for working automake-1.4... missing ... Strange I have those ones installed: i automake 1.6.3-2 Upgrade package - automake1.6 i automake1.6 1.6.3-1 Tool for generating GNU Standards-complia. You can remove automake-1.6.3-2, because it's a dummy package. I got the same message--it looks like the config script is looking for automake-1.4, which we no longer have. For pkgconfig-0.15.0 Same as above with automake Plus: ... ranlib .libs/libglib.al creating libglib.la (cd .libs rm -f libglib.la ln -s ../libglib.la libglib.la) gcc -DHAVE_CONFIG_H -I. -I. -I. -DG_LOG_DOMAIN=g_log_domain_glib -no-cpp-precomp -I/sw/include -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -c testglib.c testglib.c: In function `g_node_test': testglib.c:86: warning: reading through null pointer (arg 5) ... (a bunch of lines like this) ranlib .libs/libgthread.al creating libgthread.la (cd .libs rm -f libgthread.la ln -s ../libgthread.la libgthread.la) gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../gthread -DG_LOG_DOMAIN=\GThread\ -no-cpp-precomp -I/sw/include -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -c testgthread.c In file included from testgthread.c:6: ../testglib.c: In function `g_node_test': ../testglib.c:86: warning: reading through null pointer (arg 5) idem /bin/sh ../libtool --mode=link gcc -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -L/sw/lib -o list-test list-test.o ../libglib.la gcc -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -L/sw/lib -o list-test list-test.o ../.libs/libglib.al gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -no-cpp-precomp -I/sw/include -O3 -fstrict-aliasing -funroll-loops -Wall -D_REENTRANT -c node-test.c node-test.c: In function `g_node_test': node-test.c:99: warning: reading through null pointer (arg 5) . idem Is something wrong here? These look like they are probably just warnings. Michèle http://micmacfr.homeunix.org/ -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Prebuilt package ATLAS for iMac G3 600mhz
Nope. -Jeff On Sat, 18 Jan 2003, PETER CHEN wrote: Hi, Is there a Prebuilt package ATLAS for iMac G3 600Mhz available ? _ The new MSN 8 is here: Try it free* for 2 months http://join.msn.com/?page=dept/dialup --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users -- Jeffrey S. Whitaker Phone : (303)497-6313 NOAA/OAR/CDC R/CDC1FAX : (303)497-6449 325 BroadwayWeb : http://www.cdc.noaa.gov/~jsw Boulder, CO, USA 80305-3328 Office: Skaggs Research Cntr 1D-124 --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
This looks like the splitoff batch install problem. Can you install libogg-shlibs? -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Sat, 18 Jan 2003, Wolfgang Rumpf wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Another problem, this time while trying to install kpovmodeler from cvs source: pkg kpovmodeler version ### pkg kpovmodeler version 3.1-1 WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) - - Robert Wolfgang Rumpf, Ph.D. Bioinformaticist Director of Product Development Rescentris, Ltd. PGP public encryption key available at www.keyserver.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (Darwin) iD8DBQE+KabnJtI+DZudABYRAolgAKDtAPbCpZjumCrHnbn1UYgqMbLmPgCgjTMu 4xZmKCPWuBow4jj48EU/+e4= =F5fw -END PGP SIGNATURE- --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Prebuilt package ATLAS for iMac G3 600mhz
There is an atlas package available through fink, and there's a binary available if you have OS 10.2 . -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Sat, 18 Jan 2003, PETER CHEN wrote: Hi, Is there a Prebuilt package ATLAS for iMac G3 600Mhz available ? _ The new MSN 8 is here: Try it free* for 2 months http://join.msn.com/?page=dept/dialup --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
On Saturday, January 18, 2003, at 03:39 PM, Alexander Hansen wrote: This looks like the splitoff batch install problem. Can you install libogg-shlibs? No, it was a problem with the info file -- when the automake2.5 deps got changed, pico broke the word wrap. Do a selfupdate-cvs and it's fine. --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Apple's X11 and OpenGL
Philip Mötteli wrote: [] I can't start Apples X11. It crashes immediately with the following error messages in the console: dyld: /Applications/X11.app/Contents/MacOS/X11 Undefined symbols: /Applications/X11.app/Contents/MacOS/X11 undefined reference to _CGLSetCurrentContext expected to be defined in OpenGL [] I don't know what the problem is. I tried several things to solve the problem. I also reinstalled the OpenGL.framework from the 10.2.3 update. But nothing helped. At my place, it appeared after having installed OpenOffice. Doesn't OO come with its own copy of xfree86? If you overwrote parts of Apple's /usr/X11 when you installed OO, the behavior could be like what you are seeing. You could look with otool -L /usr/X11R6/lib/libGL.dylib whether this links with the OpenGL framework as Apple's does. Another idea would be to setenv DYLD_PRINT_LIBRARIES, then start X11 from the command line and look which library precisely is complaining about the missing symbols. -- Martin --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
On 1/18/03 3:46 PM, Benjamin Reed [EMAIL PROTECTED] wrote: No, it was a problem with the info file -- when the automake2.5 deps got changed, pico broke the word wrap. Do a selfupdate-cvs and it's fine. Nope, still broken for me: (this is after running selfupdate-cvs a few moments ago and getting fink-0.11.2-1) [Watzman-iMac:~] josh% fink selfupdate-cvs ; fink update-all sudo /sw/bin/fink selfupdate-cvs [selfupdate-cvs completes successfully] sudo /sw/bin/fink update-all Information about 2104 packages read in 2 seconds. fink needs help picking an alternative to satisfy a virtual dependency. The candidates: (1) openslp-ssl-dev: Development files for %N (2) openslp-dev: Development files for OpenSLP Pick one: [1] WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) [Watzman-iMac:~] josh% --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
On 1/18/03 3:46 PM, Benjamin Reed [EMAIL PROTECTED] wrote: No, it was a problem with the info file -- when the automake2.5 deps got changed, pico broke the word wrap. Do a selfupdate-cvs and it's fine. Nope, still broken for me: (this is after running selfupdate-cvs a few moments ago and getting fink-0.11.2-1) [Watzman-iMac:~] josh% fink selfupdate-cvs ; fink update-all sudo /sw/bin/fink selfupdate-cvs [selfupdate-cvs completes successfully] sudo /sw/bin/fink update-all Information about 2104 packages read in 2 seconds. fink needs help picking an alternative to satisfy a virtual dependency. The candidates: (1) openslp-ssl-dev: Development files for %N (2) openslp-dev: Development files for OpenSLP Pick one: [1] WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) [Watzman-iMac:~] josh% --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
On Saturday, January 18, 2003, at 04:58 PM, June Van Dyke wrote: Nope, still broken for me: (this is after running selfupdate-cvs a few moments ago and getting fink-0.11.2-1) Oop, you're right, there was a dep in the -dev part of the info file that was broken as well. WARNING: While resolving dependency libogg-shlibs (= 1. for package kdebase3-3.1-1, package libogg-shlibs (= 1. was not found. Failed: Can't resolve dependency libogg-shlibs (= 1. for package kdebase3-3.1-1 (no matching packages/versions found) This is (hopefully!) fixed now. :P --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Problem installing kpovmodeler
On 1/18/03 5:31 PM, Benjamin Reed [EMAIL PROTECTED] wrote: This is (hopefully!) fixed now. :P Yup; I got to the X Packages will be updated ; X New packages will be installed and then I stopped. -- -- sinclair44 I'm a doctor, not a mechanic. -- The Doomsday Machine, when asked if he had heard of the idea of a doomsday machine. I'm a doctor, not an escalator. -- Friday's Child, when asked to help the very pregnant Ellen up a steep incline. I'm a doctor, not a bricklayer. -- Devil in the Dark, when asked to patch up the Horta. I'm a doctor, not an engineer. -- Mirror, Mirror, when asked by Scotty for help in Engineering aboard the ISS Enterprise. I'm a doctor, not a coalminer. -- The Empath, on being beneath the surface of Minara 2. --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Pb with pkgconfig and intltool?
Le samedi, 18 jan 2003, à 23:13 Europe/Paris, Alexander Hansen a écrit : I'll guess this is the same with: i autoconf2.5 2.54-1 System for generating configure scripts i autoconf25 2.54-2 Upgrade package - autoconf2.5 I have to remove autoconf25? Go ahead and remove it. done, thanks Michèle http://micmacfr.homeunix.org/ --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Compiling ant fails
My system: Mac OS X 10.2.3 (6G30) Power Mac G4 (version = 2.0) gcc (GCC) 3.1 20020420 (prerelease) Package manager version: 0.11.1 Distribution version: 0.5.1.cvs Developer Tools December 2002 The error: fink rebuild ant . . . Note: Some input files use or override a deprecated API. Note: Recompile with -deprecation for details. 3 errors ... Failed compiling Ant classes ! Bootstrap FAILED rm -rf /sw/src/root-ant-1.5.1-1 mkdir -p /sw/src/root-ant-1.5.1-1/sw mkdir -p /sw/src/root-ant-1.5.1-1/DEBIAN /var/tmp/tmp.0.SsAtyl cp: cannot stat `ant': No such file or directory chmod: getting attributes of `/sw/src/root-ant-1.5.1-1/sw/lib/ant': No such file or directory Any help is appreciated. _ Help STOP SPAM: Try the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] new kpovmodeler problem
Try removing the packages that are problematic with sudo dpkg -r --force-depends package -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Sat, 18 Jan 2003, Wolfgang Rumpf wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The install gets further now that the dependency issue is solved, but I still get errors: The following package will be reinstalled: kpovmodeler The following 7 additional packages will be installed: kdebase3 kdebase3-dev kdebase3-shlibs kdegraphics3-base kdelibs3 kdelibs3-dev kdelibs3-shlibs Do you want to continue? [Y/n] (assuming default) dpkg -i /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- shlibs_3.1-1_darwin-powerpc.deb /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3_3.1- 1_darwin-powerpc.deb /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- dev_3.1-1_darwin-powerpc.deb dpkg: considering removing kdelibs3-ssl in favour of kdelibs3-shlibs ... dpkg: no, cannot remove kdelibs3-ssl (--auto-deconfigure will help): kpovmodeler depends on kdelibs3-ssl (= 3.0.7-3) | kdelibs3 (= 3.0.7-3) kdelibs3-ssl is to be removed. dpkg: regarding .../kdelibs3-shlibs_3.1-1_darwin-powerpc.deb containing kdelibs3-shlibs: kdelibs3-shlibs conflicts with kdelibs3-ssl kdelibs3-ssl (version 3.0.7-5) is installed. dpkg: error processing /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- shlibs_3.1-1_darwin-powerpc.deb (--install): conflicting packages - not installing kdelibs3-shlibs dpkg: regarding .../kdelibs3_3.1-1_darwin-powerpc.deb containing kdelibs3: kdelibs3-ssl conflicts with keramik kdelibs3 provides keramik and is to be installed. dpkg: error processing /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3_3.1- 1_darwin-powerpc.deb (--install): conflicting packages - not installing kdelibs3 dpkg: considering removing kdelibs3-ssl in favour of kdelibs3-dev ... dpkg: no, cannot remove kdelibs3-ssl (--auto-deconfigure will help): kpovmodeler depends on kdelibs3-ssl (= 3.0.7-3) | kdelibs3 (= 3.0.7-3) kdelibs3-ssl is to be removed. dpkg: regarding .../kdelibs3-dev_3.1-1_darwin-powerpc.deb containing kdelibs3-dev: kdelibs3-dev conflicts with kdelibs3-ssl kdelibs3-ssl (version 3.0.7-5) is installed. dpkg: error processing /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- dev_3.1-1_darwin-powerpc.deb (--install): conflicting packages - not installing kdelibs3-dev Errors were encountered while processing: /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- shlibs_3.1-1_darwin-powerpc.deb /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3_3.1- 1_darwin-powerpc.deb /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- dev_3.1-1_darwin-powerpc.deb ### execution of dpkg failed, exit code 1 Failed: can't batch-install packages: /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- shlibs_3.1-1_darwin-powerpc.deb /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3_3.1- 1_darwin-powerpc.deb /sw/fink/dists/unstable/main/binary-darwin-powerpc/kde/kdelibs3- dev_3.1-1_darwin-powerpc.deb - - Robert Wolfgang Rumpf, Ph.D. Bioinformaticist Director of Product Development Rescentris, Ltd. PGP public encryption key available at www.keyserver.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (Darwin) iD8DBQE+Kd96JtI+DZudABYRAta5AKDo3lLlmfzcueRDmZ6kYinBO/Na1wCZAcmX nqlQmN++nr/cTGu9JYnu+b0= =lfV2 -END PGP SIGNATURE- --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] problem with selfupdate
I got: Package: lame-shlibs Status: install ok installed Maintainer: Sylvain Cuaz [EMAIL PROTECTED] Source: lame-shlibs Version: 3.92-4 Replaces: lame Description: MP3 encoder and graphical frame analyzer LAME (LAME Ain't an MP3 Encoder) is a research project for learning about and improving MP3 encoding technoligy. LAME includes an mp3 encoding library, simple front end application, a much-improved psycho-acoustic Philip At 3:30 PM -0500 1/17/03, Alexander Hansen wrote: Hmm. it looks like the file got corrupted somehow. It should have showed something like this (from my system): ... [ldx3:var/lib/dpkg] hansen% head status Package: qt3 Status: install ok installed Maintainer: Benjamin Reed [EMAIL PROTECTED] Source: qt3 Version: 3.1.1-3 Replaces: qt, qt2, qt3-doc, qt3-bin, qt3-dev Provides: qt3-bin Depends: qt3-shlibs, qt3-designer, qt3-linguist, qt3-doc Suggests: libpng3, libjpeg, freetype2 Conflicts: qt, qt2 ... Try head /sw/var/lib/dpkg/status-old -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Fri, 17 Jan 2003, Philip Trauring wrote: All I got was: emboi^tab Philip At 1:06 PM -0500 1/17/03, Alexander Hansen wrote: Let's see what the file looks like. Post (on-list) the results of doing head /sw/var/lib/dpkg/status -- Alexander K. Hansen --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] problem with selfupdate
Check and see whether /sw/var/lib/dpkg/availble-old is good (It should look similar to your new /sw/var/lib/dpkg/status). If so, then copy it over /sw/var/lib/dpkg/available . -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Sat, 18 Jan 2003, Philip Trauring wrote: That seems to have worked, but when it goes to update a package (after running update-all as suggested), I get this: Information about 940 packages read in 0 seconds. The following package will be installed or updated: dict dpkg -i /sw/fink/dists/stable/main/binary-darwin-powerpc/text/dict_1.7.1-1_darwin-powerpc.deb dpkg: parse error, in file `/sw/var/lib/dpkg/available' near line 1: field name `rai' must be followed by colon ### execution of dpkg failed, exit code 2 Failed: can't install package dict-1.7.1-1 I tried updating another package an got a similar response. I tried a third (xpilot) and it seemed to compile okay, but at the end I got: Writing control file... mkdir -p /sw/fink/dists/stable/main/binary-darwin-powerpc/games dpkg-deb -b root-xpilot-4.5.4-1 /sw/fink/dists/stable/main/binary-darwin-powerpc/games dpkg-deb: building package `xpilot' in `/sw/fink/dists/stable/main/binary-darwin-powerpc/games/xpilot_4.5.4-1_darwin-powerpc.deb'. ln -sf /sw/fink/dists/stable/main/binary-darwin-powerpc/games/xpilot_4.5.4-1_darwin-powerpc.deb /sw/fink/debs/ rm -rf /sw/src/root-xpilot-4.5.4-1 dpkg -i /sw/fink/dists/stable/main/binary-darwin-powerpc/games/xpilot_4.5.4-1_darwin-powerpc.deb dpkg: parse error, in file `/sw/var/lib/dpkg/available' near line 1: field name `rai' must be followed by colon ### execution of dpkg failed, exit code 2 Failed: can't install package xpilot-4.5.4-1 From one problem to the next it seems... Philip At 6:57 PM -0500 1/18/03, Alexander Hansen wrote: OK. You should be able to try sudo cp /sw/var/lib/dpkg/status-old /sw/var/lib/dpkg/status and then try updating again. -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Sat, 18 Jan 2003, Philip Trauring wrote: I got: Package: lame-shlibs Status: install ok installed Maintainer: Sylvain Cuaz [EMAIL PROTECTED] Source: lame-shlibs Version: 3.92-4 Replaces: lame Description: MP3 encoder and graphical frame analyzer LAME (LAME Ain't an MP3 Encoder) is a research project for learning about and improving MP3 encoding technoligy. LAME includes an mp3 encoding library, simple front end application, a much-improved psycho-acoustic Philip At 3:30 PM -0500 1/17/03, Alexander Hansen wrote: Hmm. it looks like the file got corrupted somehow. It should have showed something like this (from my system): ... [ldx3:var/lib/dpkg] hansen% head status Package: qt3 Status: install ok installed Maintainer: Benjamin Reed [EMAIL PROTECTED] Source: qt3 Version: 3.1.1-3 Replaces: qt, qt2, qt3-doc, qt3-bin, qt3-dev Provides: qt3-bin Depends: qt3-shlibs, qt3-designer, qt3-linguist, qt3-doc Suggests: libpng3, libjpeg, freetype2 Conflicts: qt, qt2 ... Try head /sw/var/lib/dpkg/status-old -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Fri, 17 Jan 2003, Philip Trauring wrote: All I got was: emboi^tab Philip At 1:06 PM -0500 1/17/03, Alexander Hansen wrote: Let's see what the file looks like. Post (on-list) the results of doing head /sw/var/lib/dpkg/status -- Alexander K. Hansen --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED]
[Fink-users] only 1 arg to macro 'whatever' (2 expected)
only 1 arg to macro 'whatever' (2 expected) it's a repetitive problem in packages I try to compile also... /sw/bin/tbl: No such file or directory /sw/bin/nroff: No such file or directory lenny bruceI am not a comedian, [EMAIL PROTECTED]I am Lenny Bruce. --- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en ___ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
