Re: [Flexradio] New 1500 install trouble
Never mind - uninstall and reinstall of PowerSDR fixed the issue - when I installed PowerSDR origionally I did not have a Flex 1500 so the drivers were not available when I first plugged in the1500 - I now have the TurboEncabulator Interfaces installed and radio is working at least on RX. I had to cancel the uninstall and uninstall vspmgr and then restart the install - will see if I can make a contact now! -Larry On Fri, Jun 29, 2012 at 9:42 PM, Larry da Ponte wrote: > Hello group - proud owner of a new Flex 1500 but having some install > issues. I'm running a Mac PowerBook 8gb ram, dual core, with win7 64 and > PowerSDR 2.3.5. Upon plugging in the 1500's USB port and powering on the > radio, windows 7 started searching for a driver. It found two drivers but > failed to find two others. The windows dialog shows one USB Composite > Device and four Flex-1500 devices. Three of the 1500 devices failed with > "No driver found" while the last Flex-1500 device says "Flex 1500 Software > Defined Radio" ready to use. So - not sure if that's a failure or a > success but since it said the flex was ready I started PowerSDR and see the > flex radio chooser. The Flex 1500 is not on the list but my Flex 3000 and > 5000 (with their serial numbers showing) are. So - I think the USB is > connected since the driver recognized the radio but PowerSDR is not able to > see the 1500 and let me select it. Suggestions on next steps? > > Thanks > > -- > > 73's > N7BCP > -- 73's N7BCP ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] New 1500 install trouble
Hello group - proud owner of a new Flex 1500 but having some install issues. I'm running a Mac PowerBook 8gb ram, dual core, with win7 64 and PowerSDR 2.3.5. Upon plugging in the 1500's USB port and powering on the radio, windows 7 started searching for a driver. It found two drivers but failed to find two others. The windows dialog shows one USB Composite Device and four Flex-1500 devices. Three of the 1500 devices failed with "No driver found" while the last Flex-1500 device says "Flex 1500 Software Defined Radio" ready to use. So - not sure if that's a failure or a success but since it said the flex was ready I started PowerSDR and see the flex radio chooser. The Flex 1500 is not on the list but my Flex 3000 and 5000 (with their serial numbers showing) are. So - I think the USB is connected since the driver recognized the radio but PowerSDR is not able to see the 1500 and let me select it. Suggestions on next steps? Thanks -- 73's N7BCP ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Vista can't find SDR fire wire driver during install
Download the installer from the web site and run it rather than the CD http://support.flexradio.com/Downloads.aspx?id=393 Tim Ellison On 6/28/2012 10:51 PM, David Garnier wrote: Hi, I just bought a new PC with Vista Business 32 bit with SP-2 installed on it. _Note_. I am new to Vista and I think I have administrator privileges! At this point (of my lovely adventure into the O/S called Vista,) the fire wire 400 card is already installed, device mangler reports that TI's IEEE 1394 driver is alreadly installed and there's no conflicts. Problem. During the installation of Power SDR 2.3.5 package, the install process cannot find Flex's Fire Wire driver on the CD. OK, what is the name of this driver and where can it be found? Couple weeks ago XP found Flex's Fire Wire driver on the CD, so what gives? Thanks guys. 73's Dave Garnier - wb9own ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Question about 6 meters receive
On Fri, Jun 29, 2012 at 10:29 AM, Mark Lunday wrote: > I am seeing strong CW signals have a reflection or ghost image, Is there > anything I can do to eliminate this? > Terminate and relaunch PowerSDR. That should make the problem go away for awhile. It helps a lot if the radio has a strong signal to calibrate WBIR against otherwise it ends up with compromised image rejection. Typically 6m doesn't have a lot of strong signals so WBIR can get lost in the weeds. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] ssb latency flex1500
I have noticed that when I release the ptt of the microphone I can hear a little of my transmitted speech, eg the last digit of my call sign. Has anyone experienced this and how can it be corrected, please? I am using software version 2.3.5 . Morrice M5ADZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Question about 6 meters receive
Yeah, I saw the same ghost image on a CW signal on my 5000A on the second receiver last night The signal wasn't that strong either, maybe S-6 and the ghost was S-2 Dennis KØEOO - Original Message - From: "Mark Lunday" To: flexradio@flex-radio.biz Sent: Friday, June 29, 2012 9:29:27 AM Subject: [Flexradio] Question about 6 meters receive I am seeing strong CW signals have a reflection or ghost image, Is there anything I can do to eliminate this? SDR 2.2.3, Flex 3000, Pre2 on. Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@arrl.net http://wd4elg.blogspot.com http://wd4elg.net ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Question about 6 meters receive
I am seeing strong CW signals have a reflection or ghost image, Is there anything I can do to eliminate this? SDR 2.2.3, Flex 3000, Pre2 on. Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@arrl.net http://wd4elg.blogspot.com http://wd4elg.net ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] 3new powersdr skin
Hello Everyone!! I have three new skin designs for the PowerSDR soft (K2DERsmoke-K2DERdroid-K2DER0407) I want to share with everyone, I probe with the latest version of the software 2.3.5 and works great, you can download from my web, can also download the tutorial how to install the skin's, thanks for your time and have a good one K2DER -- www.k2der.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/