date:20140310

Re: [Flexradio] Using Digital Master 780 with Flex 5000a

2014-03-10 Thread Keith Watson

I believe it is a little more basic than that. I tried FLDigi and MMVari
and they all show the same symptom when coping PSK31.

Keith...


On Mon, Mar 10, 2014 at 9:11 PM, John Swink  wrote:

> Keith,
> I never could get DM780 to work with my Flex 5000A so I switched to Fldigi.
> It runs all digital modes except WSJT with no problems.
>
> 73,
> John, N8WNA
>
> -Original Message-
> From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
> Keith
> Watson
> Sent: Monday, March 10, 2014 9:33 PM
> To: FlexRadio@flex-radio.biz
> Subject: [Flexradio] Using Digital Master 780 with Flex 5000a
>
> Just when I think I got everything worked out, I figure out that I don't.
> Tried to run some PSK31 for the first time this evening using DM780.
> However, I realize that it is not decoding worth a darn. Very strong
> signals
> that should print 100 percent are only printing about 20 percent if that. I
> figured I had the sample rate set wrong for this program in PSDR, but any
> change to it does not seem to make much of a difference or make it worse. I
> figure I am doing something dumb, but I have not figured out that it is
> yet.
> Thanks.
>
> Latest version of PDSR.
> VAC 4.13
> HRD 6.1.4
>
> Keith...
> N9TX
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Using Digital Master 780 with Flex 5000a

2014-03-10 Thread Keith Watson

Just when I think I got everything worked out, I figure out that I don't.
Tried to run some PSK31 for the first time this evening using DM780.
However, I realize that it is not decoding worth a darn. Very strong
signals that should print 100 percent are only printing about 20 percent if
that. I figured I had the sample rate set wrong for this program in PSDR,
but any change to it does not seem to make much of a difference or make it
worse. I figure I am doing something dumb, but I have not figured out that
it is yet. Thanks.

Latest version of PDSR.
VAC 4.13
HRD 6.1.4

Keith...
N9TX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Ready to quit

2014-03-10 Thread Robert Logan

Bill, I use the 1500 bare for everything, including contesting.  No nothing on 
it.  Don't need anything else 

My daughter is a ham (38 years old and a professor at Rice University) and she 
can 't stand a radio with knobs.  Too many things to adjust, she says, and 
proceeds to manipulate complex menus not even thinking about it   It doesn't 't 
faze her a bit.

I have many vintage radios with lots of knobs because they had a special 
meaning for me at one time and they are pretty and unique to show.  But for 
operating, no.

People look at the Globe Scout 680 and 755 VFO (matching!) and Hallicrafters 
SX-99 and the Johnson Matchbox and say, you actually used that .  Yep, and 
learned a heckuva lot of radio doing that.  But thank goodness we've come along 
a long ways in 50 years.  Just my opinion.  Bob, NZ5A

Sent from my iPhone

On Mar 10, 2014, at 7:07 PM, "William H. Fite"  wrote:

Or swallow hard and give up your dependence on knobs.  I'm not being a
patronizing smart ass but many of us have done just that and never looked
back.  The number of people who have discovered that you don't need
knobseven for contesting--is growing steadily.

Bill
KJ4SLP


On Mon, Mar 10, 2014 at 7:49 PM, Jay  wrote:

> Bill
> 
> You have probably seen this, PowerSDR-UI -- knobs for your SDR radio <
> http://www.dh1tw.de/powersdr-ui>, but in case you missed it, there it is.
> Perhaps an email to tob...@dh1tw.de , or asking
> at PowerSDR-UI discussion group at Yahoogroups  group/PowerSDR-UI/> might help.:-)
> 
> 
> 73
> Jay - NO5J
> n...@no5j.org
> 
> On 3/10/2014 4:54 PM, William and Susan wrote:
> 
>> Well, I guess I am just about ready to quit.  I have bought and tried to
>> install  SDR-Ui, I could not.  I bought and tried to install the Hercules
>> DJ controller and could not.  I have bought the Flex Controller and tried
>> to put that in line and I could not.  So, I will give it a try one more
>> time and if fail then I might as well sell this computer, flex radio, DJ
>> control, and a Flex radio control.  Now I admit I am a nit wit when it
>> comes to loading computers with stuff.,But, I do know how to run
>> whatever programs I have in it.  Now when I try to load up the Flex it
>> tells me there is another flex running but I do not see it anywhere.   I
>> have 3 Masters Degrees, I was a FBI Profiler with a specialty of hunting
>> down Serial Sadistic Sex Offenders.  The point being I am not an idiot with
>> all things.  I have checked the internet but they simply say to download
>> things but not tell me what to do with them once it is downloaded.  If
>> anyone has the program Team Viewer I would gladly let you take control of
>> this computer and set it right for me.
>> Ok
>> Any last time help would be greatly appreciated.
>> Bill
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>> 
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
> 



-- 
I can explain it for you, but I can't comprehend it for you.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Ready to quit

2014-03-10 Thread Robert Logan

Bill, check with Dudley Hurry at Flex.  Forget Internet instructions.  Dudley 
is incredibly helpful.

If you chuck the Flex, you'll be missing out on the best radio there is.  And I 
don't even have the top of the line---just the 1500 and it is fantastic.

Lots of people have them working.  You can too, and it's well worth any effort 
it takes.  IMHO.  Bob, NZ5A



Sent from my iPhone

On Mar 10, 2014, at 6:49 PM, Jay  wrote:

Bill

You have probably seen this, PowerSDR-UI -- knobs for your SDR radio 
, but in case you missed it, there it is. 
Perhaps an email to tob...@dh1tw.de , or asking at 
PowerSDR-UI discussion group at Yahoogroups 
 might help.:-)

73
Jay - NO5J
n...@no5j.org

On 3/10/2014 4:54 PM, William and Susan wrote:
> Well, I guess I am just about ready to quit.  I have bought and tried to 
> install  SDR-Ui, I could not.  I bought and tried to install the Hercules DJ 
> controller and could not.  I have bought the Flex Controller and tried to put 
> that in line and I could not.  So, I will give it a try one more time and if 
> fail then I might as well sell this computer, flex radio, DJ control, and a 
> Flex radio control.  Now I admit I am a nit wit when it comes to loading 
> computers with stuff.,But, I do know how to run whatever programs I have 
> in it.  Now when I try to load up the Flex it tells me there is another flex 
> running but I do not see it anywhere.   I have 3 Masters Degrees, I was a FBI 
> Profiler with a specialty of hunting down Serial Sadistic Sex Offenders.  The 
> point being I am not an idiot with all things.  I have checked the internet 
> but they simply say to download things but not tell me what to do with them 
> once it is downloaded.  If anyone has the program Team Viewer I would gladly 
> let
  you take control of this computer and set it right for me.
> Ok
> Any last time help would be greatly appreciated.
> Bill
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Ready to quit

2014-03-10 Thread William H. Fite

Or swallow hard and give up your dependence on knobs.  I'm not being a
patronizing smart ass but many of us have done just that and never looked
back.  The number of people who have discovered that you don't need
knobseven for contesting--is growing steadily.

Bill
KJ4SLP


On Mon, Mar 10, 2014 at 7:49 PM, Jay  wrote:

> Bill
>
> You have probably seen this, PowerSDR-UI -- knobs for your SDR radio <
> http://www.dh1tw.de/powersdr-ui>, but in case you missed it, there it is.
> Perhaps an email to tob...@dh1tw.de , or asking
> at PowerSDR-UI discussion group at Yahoogroups  group/PowerSDR-UI/> might help.:-)
>
>
> 73
>  Jay - NO5J
> n...@no5j.org
>
> On 3/10/2014 4:54 PM, William and Susan wrote:
>
>> Well, I guess I am just about ready to quit.  I have bought and tried to
>> install  SDR-Ui, I could not.  I bought and tried to install the Hercules
>> DJ controller and could not.  I have bought the Flex Controller and tried
>> to put that in line and I could not.  So, I will give it a try one more
>> time and if fail then I might as well sell this computer, flex radio, DJ
>> control, and a Flex radio control.  Now I admit I am a nit wit when it
>> comes to loading computers with stuff.,But, I do know how to run
>> whatever programs I have in it.  Now when I try to load up the Flex it
>> tells me there is another flex running but I do not see it anywhere.   I
>> have 3 Masters Degrees, I was a FBI Profiler with a specialty of hunting
>> down Serial Sadistic Sex Offenders.  The point being I am not an idiot with
>> all things.  I have checked the internet but they simply say to download
>> things but not tell me what to do with them once it is downloaded.  If
>> anyone has the program Team Viewer I would gladly let you take control of
>> this computer and set it right for me.
>> Ok
>> Any last time help would be greatly appreciated.
>> Bill
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>



-- 
I can explain it for you, but I can't comprehend it for you.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Ready to quit

2014-03-10 Thread Jay


Bill

You have probably seen this, PowerSDR-UI -- knobs for your SDR radio 
, but in case you missed it, there it 
is. Perhaps an email to tob...@dh1tw.de , or 
asking at PowerSDR-UI discussion group at Yahoogroups 
 might help.:-)


73
 Jay - NO5J
n...@no5j.org

On 3/10/2014 4:54 PM, William and Susan wrote:

Well, I guess I am just about ready to quit.  I have bought and tried to 
install  SDR-Ui, I could not.  I bought and tried to install the Hercules DJ 
controller and could not.  I have bought the Flex Controller and tried to put 
that in line and I could not.  So, I will give it a try one more time and if 
fail then I might as well sell this computer, flex radio, DJ control, and a 
Flex radio control.  Now I admit I am a nit wit when it comes to loading 
computers with stuff.,But, I do know how to run whatever programs I have in 
it.  Now when I try to load up the Flex it tells me there is another flex 
running but I do not see it anywhere.   I have 3 Masters Degrees, I was a FBI 
Profiler with a specialty of hunting down Serial Sadistic Sex Offenders.  The 
point being I am not an idiot with all things.  I have checked the internet but 
they simply say to download things but not tell me what to do with them once it 
is downloaded.  If anyone has the program Team Viewer I would gladly let

 you take control of this computer and set it right for me.

Ok
Any last time help would be greatly appreciated.
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Ready to quit

2014-03-10 Thread Jay


Bill

Welcome to my world. Don't give up, you can do it. It's only Software, 
It's only 0s and 1s, 1s are easy and 0s are nothing, Not much help, I 
know. I don't have a DJ controller or a Flex controller, so I can't 
really provide the answer you seek, So I provide encouragement instead. 
Perhaps a change into fresh "Big Boy Pants" is in order. Don't sell the 
Flex. Why does not having a DJ controller tied to your Ham Radio end up 
being a fail? It's not that it doesn't work, It just doesn't work YET. 
Take a break, and then get back to work, err I mean get back to the 
Excitement!:-)


Climbing Mt Everest is not the important part, the important part is 
climbing back down.


73
 Jay - NO5J
n...@no5j.org

On 3/10/2014 4:54 PM, William and Susan wrote:

Well, I guess I am just about ready to quit.  I have bought and tried to 
install  SDR-Ui, I could not.  I bought and tried to install the Hercules DJ 
controller and could not.  I have bought the Flex Controller and tried to put 
that in line and I could not.  So, I will give it a try one more time and if 
fail then I might as well sell this computer, flex radio, DJ control, and a 
Flex radio control.  Now I admit I am a nit wit when it comes to loading 
computers with stuff.,But, I do know how to run whatever programs I have in 
it.  Now when I try to load up the Flex it tells me there is another flex 
running but I do not see it anywhere.   I have 3 Masters Degrees, I was a FBI 
Profiler with a specialty of hunting down Serial Sadistic Sex Offenders.  The 
point being I am not an idiot with all things.  I have checked the internet but 
they simply say to download things but not tell me what to do with them once it 
is downloaded.  If anyone has the program Team Viewer I would gladly let

 you take control of this computer and set it right for me.

Ok
Any last time help would be greatly appreciated.
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Ready to quit

2014-03-10 Thread David Movius

Hello Bill,

Suggest you consider contacting Neal Campbell.  Computer nuances are not my
forte but Neal changed my Flex life from frustrating to great joy.  Below is
a link to get an idea of his support options.  He would no doubt welcome a
phone call to discuss your situation(s) so you can decide how best to
proceed.  

Whatever you do, I hope you do not quit.  Once you get everything working,
you may find the passion for SDR that many of us enjoy.  Take a look at the
link below.

http://www.abrohamnealsoftware.com/Support.htm

Vy 73, 

Dave W7IWW

-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
William and Susan
Sent: Monday, March 10, 2014 3:54 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Ready to quit

Well, I guess I am just about ready to quit.  I have bought and tried to
install  SDR-Ui, I could not.  I bought and tried to install the Hercules DJ
controller and could not.  I have bought the Flex Controller and tried to
put that in line and I could not.  So, I will give it a try one more time
and if fail then I might as well sell this computer, flex radio, DJ control,
and a Flex radio control.  Now I admit I am a nit wit when it comes to
loading computers with stuff.,But, I do know how to run whatever
programs I have in it.  Now when I try to load up the Flex it tells me there
is another flex running but I do not see it anywhere.   I have 3 Masters
Degrees, I was a FBI Profiler with a specialty of hunting down Serial
Sadistic Sex Offenders.  The point being I am not an idiot with all things.
I have checked the internet but they simply say to download things but not
tell me what to do with them once it is downloaded.  If anyone has the
program Team Viewer I would gladly let you take control of this computer and
set it right for me.
Ok
Any last time help would be greatly appreciated.
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4335 / Virus Database: 3705/7145 - Release Date: 03/03/14
Internal Virus Database is out of date.


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Ready to quit

2014-03-10 Thread Russ Dearmore

Bill,  I know the feeling...   I'm having a dickens of a time getting VAC to 
work.  Suggest you contact Neal at:
 
Abroham Neal Software
Mail:
Abroham Neal Software
120 Delmar Ct
Fredericksburg, VA 22407 
USA
Telephone
+1 540 645 5394
Fax
+1 888 645 4696
Email inquiries
Sales information
nealk...@gmail.com
Technical support
nealk...@gmail.com
Website/admin
ad...@abrohamnealsoftware.com

  
My Heroes Wear Combat Boots!
 
 
 
 
 
 
 
 
 
 
 
 

From: William and Susan 
>To: FlexRadio@flex-radio.biz 
>Sent: Monday, March 10, 2014 4:54 PM
>Subject: [Flexradio] Ready to quit
>
>
>Well, I guess I am just about ready to quit.  I have bought and tried to 
>install  SDR-Ui, I could not.  I bought and tried to install the Hercules DJ 
>controller and could not.  I have bought the Flex Controller and tried to put 
>that in line and I could not.  So, I will give it a try one more time and if 
>fail then I might as well sell this computer, flex radio, DJ control, and a 
>Flex radio control.  Now I admit I am a nit wit when it comes to loading 
>computers with stuff.,    But, I do know how to run whatever programs I have 
>in it.  Now when I try to load up the Flex it tells me there is another flex 
>running but I do not see it anywhere.  I have 3 Masters Degrees, I was a FBI 
>Profiler with a specialty of hunting down Serial Sadistic Sex Offenders.  The 
>point being I am not an idiot with all things.  I have checked the internet 
>but they simply say to download things but not tell me what to do with them 
>once it is downloaded.  If anyone has
 the program Team Viewer I would gladly let you take control of this computer 
and set it right for me.
>Ok
>Any last time help would be greatly appreciated.
>Bill
>___
>FlexRadio Systems Mailing List
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
>
>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Ready to quit

2014-03-10 Thread William and Susan

Well, I guess I am just about ready to quit.  I have bought and tried to 
install  SDR-Ui, I could not.  I bought and tried to install the Hercules DJ 
controller and could not.  I have bought the Flex Controller and tried to put 
that in line and I could not.  So, I will give it a try one more time and if 
fail then I might as well sell this computer, flex radio, DJ control, and a 
Flex radio control.  Now I admit I am a nit wit when it comes to loading 
computers with stuff.,But, I do know how to run whatever programs I have in 
it.  Now when I try to load up the Flex it tells me there is another flex 
running but I do not see it anywhere.   I have 3 Masters Degrees, I was a FBI 
Profiler with a specialty of hunting down Serial Sadistic Sex Offenders.  The 
point being I am not an idiot with all things.  I have checked the internet but 
they simply say to download things but not tell me what to do with them once it 
is downloaded.  If anyone has the program Team Viewer I would gladly let y
 ou take control of this computer and set it right for me.
Ok
Any last time help would be greatly appreciated.
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Weird 1500 operation

2014-03-10 Thread Greg Jurrens

Mike:

Good morning.  Let's try 2 things to see if we can get you going:

RESET YOUR DATABASE:
1. Power up radio
2. Start PowerSDR
3. Go to /SETUP/GENERAL
4. In the lower left, hit the FACTORY DEFAULTS button.
5. This will close the program.
6. Restart PowerSDR and see if that works.

MANUALLY RE-INSTALL the USB Driver
1. Power OFF the FLEX-1500
2. Go to C:\Program Files\FlexRadio Systems\PowerSDR v2.7.2 \1500 Driver64
3. Find the file "uninstall.bat"  Right Click on the file and then click
RUN AS ADMINISTRATOR
4. When it's finished... Reboot the PC
5. After rebooted ... Go to C:\Program Files\FlexRadio Systems\PowerSDR
v2.7.2 \1500 Driver64
6. Find the file "wd_install.bat" Right Click on the file and then click
RUN AS ADMINISTRATOR
7. When it's finished... Reboot the PC
8. Power up the radio and let it finish the installation.
9. Start PowerSDR and see what's up.

FYI, this post looks like a direct request for HELP. With 6 different
radios and 2 radio operating systems now, our CS team is hopping pretty
fast.  I would suggest for HELP questions in the future, submit a ticket to
http://helpdesk.flexradio.com .  We are actually converting all HELP inputs
from email, phone, community, etc. to tickets so we can respond efficiently
and not drop anything along the way.

Good luck.  If the above doesn't work, I'd suggest getting SUPPORT formally
in the loop.

73,
Greg - K5GJ

On Mon, Mar 10, 2014 at 8:09 AM, Michael Walker wrote:

> I'm out in the wilds of Alberta (ve6 land) with Ken va3sk.
>
> We have a 1500 with us and it works on 1 computer and not the other.
>
> So, on the failing one, we have no audio on the radio (but we do on VAC)
> and no RF out.
>
> I have tried to do a complete uninstall/reinstall, but no joy.  Even a
> database reset didn't help.  This includes doing:
>
>
>- uninstall
>- delete the flex directory from program files
>- reboot
>- reinstall
>- reboot
>- still fails
>
> I know that it is an installation issue.
>
> Tim, how do I totally remove everything?  What are the registry settings
> that I need to go find to delete.
>
> Both computers are w7/64.  One works great (other than bad CW) and the
> other fails poorly.
>
> Mike va3mw
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>

-- 
Greg Jurrens - K5GJ
VP, Sales and Business Development
FlexRadio Systems
4616 W Howard Lane Ste 1-150
Austin, TX 78728
T: 512-535-4713 x203
E: g...@flexradio.com

"Tune in Excitement" (tm)
PowerSDR(TM) and SmartSDR(TM) are trademarks of FlexRadio Systems(R)
Web: www.flexradio.com 
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Weird 1500 operation

2014-03-10 Thread Michael Walker

I'm out in the wilds of Alberta (ve6 land) with Ken va3sk.

We have a 1500 with us and it works on 1 computer and not the other.

So, on the failing one, we have no audio on the radio (but we do on VAC)
and no RF out.

I have tried to do a complete uninstall/reinstall, but no joy.  Even a
database reset didn't help.  This includes doing:


   - uninstall
   - delete the flex directory from program files
   - reboot
   - reinstall
   - reboot
   - still fails

I know that it is an installation issue.

Tim, how do I totally remove everything?  What are the registry settings
that I need to go find to delete.

Both computers are w7/64.  One works great (other than bad CW) and the
other fails poorly.

Mike va3mw
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Using Digital Master 780 with Flex 5000a

[Flexradio] Using Digital Master 780 with Flex 5000a

Re: [Flexradio] Ready to quit

Re: [Flexradio] Ready to quit

Re: [Flexradio] Ready to quit

Re: [Flexradio] Ready to quit

Re: [Flexradio] Ready to quit

Re: [Flexradio] Ready to quit

Re: [Flexradio] Ready to quit

[Flexradio] Ready to quit

Re: [Flexradio] Weird 1500 operation

[Flexradio] Weird 1500 operation

12 matches

Site Navigation

Mail list logo

Footer information