from:"Edward J White"

[Flexradio] Help

2008-07-08 Thread Edward J White

Was installing the RX2 and HRFIO unit when I noticed that there is a cut 
wire going to the antenna tuner unit. The wire in question is from the 
flat 9 wire cable which is hard wired to the AT then it goes to the plug 
in plug on the transmitter unit. The wire is #9 (#1 is the red wire) of 
the flat cable and it is cut off. Should it be cut? Or did I brake it 
off while putting the HRFIO board? Will some one take a look at this on 
there unit?
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] need help with AT wire

2008-07-08 Thread Edward J White



Edward J White wrote:
> Was installing the RX2 and HRFIO unit when I noticed that there is a 
> cut wire going to the antenna tuner unit. The wire in question is from 
> the flat 9 wire cable which is hard wired to the AT then it goes to 
> the plug in plug on the transmitter unit. The wire is #9 (#1 is the 
> red wire) of the flat cable and it is cut off. Should it be cut? Or 
> did I brake it off while putting the HRFIO board? Will some one take a 
> look at this on there unit?
> Ed
> WA3BZT
>
>

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] owners manual

2008-07-04 Thread Edward J White

Hi Gang:
Have a question on the operator's manual
The latest manual listed on the web is Version 1.10.3
The picture of the op system shows 14.200.00 VFO a 14.158.00 VFO B
But I have a copy that I copy from the FLEX site earlier this year that 
says its Version 1.10.3 and has a op system with 7.255.00 VFO A and 
2.277.500 VFO B
What is going on here?
Is there a Version 1.12.0 Operator's Manual?
I am sure I have missed something somewhere?
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] New Software Harmonic

2008-07-03 Thread Edward J White

Congratulations, Eric!  It is good to hear Marion, Caleb and you are all doing 
well and I am sure you will enjoy fun. 
Ed
WA3BZT



Gerald Youngblood wrote:
> We are pleased to announce a new "software harmonic" as the latest Flexer
> from Eric Wachsmann and his wife Marion.  Caleb Wachsmann weighed in at 5
> pounds 15 ounces at 6:30 AM this morning.  This is their third child so they
> will be very busy.
>  
> Eric will be off on paternity leave for up to two weeks.  I expect that he
> will be checking email from time to time but please be patient if he does
> not respond immediately.
>  
> Regards,
> Gerald
>  
> Gerald Youngblood, K5SDR
> President
> FlexRadio Systems
> 13091 Pond Springs Rd. #250
> Austin, TX 78729
> Phone: 512-535-4713
>  
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kb.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/
>
>
>   

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] RX2 Demo video posted on www.flex-videos.com

2008-06-14 Thread Edward J White

Hi Neal:
The video for installation stops about where you start to talk about the 
FLEX RFIO board "H" that all I can get?
Anybody else get the same?
Ed
WA3BZT


Neal Campbell wrote:
> Since Youtube shrinks the size of the video, there is litte screen
> resolution, so I have added the RX2 Demo video to the RX2 installation
> video on www.flex-videos.com.
>
> Again, if anyone has any videos they would like to share, send them to
> me and I will add them to the site!
>
> Neal
>
>   

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] how do I know that SVN is working

2008-05-16 Thread Edward J White

Hi Gang:
Question I have installed 1.10.4 SVN 2206X How do I know that the SVN 
system is working and is updating the original 1.10.4 program?
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] CW QSK ability

2008-04-26 Thread Edward J White

Hi Gang:
I think this is a good question "Is OS Ubuntu a better way to do SDR."
Ed
WA3BZT

John Brosnahan -- W0UN wrote:
>> The problem isn't PowerSDR. It's the lack of integrated, rational support in
>> Windows for the kinds of state transitions in the audio subsystem that a QSK
>> application requires, especially when users demand that it also cooperate
>> transparently with third-party applications over which PowerSDR has no
>> control.
>> 
>
>
> Hi, Frank--
>
> So then is this very fundamental issue with Windows handled better in Linux?
>
> Ergo, is this the key (bad pun) to move PWRSDR development towards Ubuntu
> and away from MS?
>
> Being a QSK guy myself and not enamored with MS Windows I am
> all for anything that points to a new OS platform, especially if it solves
> the QSK issue.
>
> --John  W0UN
>
>
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kb.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/
>
>
>   

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] Transverter question

2008-04-11 Thread Edward J White

Hi Gang:
This question is for the people using the FLEX-5000A with transverters.
What are you using to switch the REC and XMT (28 MHz) to each 
transverter? I know Mike is using a multi SMA relay one in and several 
feed outputs.
What I plan on doing is using separate REC and XMT out of the 5000A to 
some coax switches (2) to the input REC and XMT of the transverters. 
Where can I locate two switches to do the job?
How are you controlling the switching network?
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] Hamfest at Timonium,MD

2008-03-26 Thread Edward J White

Hi Gang:
Will there be a gathering of the Flexers at the Timonium, MD hamfest? 
What time?
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] 144 & 420 MHz unit

2008-02-01 Thread Edward J White



Edward J White wrote:
> Hi Gang:
> Have some questions on the 144 MHz /420 MHz unit for the FLEX-5000.
> 1. What will the output power be for 144 and 420 MHz.
> I need to know as for 902 MHz and above use144 MHz  drive the 
> transverters.Or will there be a software power output for using the 
> transverter at 144 MHz.
> 2. Will the outputs of the 144 MHz and 420MHz from the FLEX-5000 be a 
> TR/REC one output  or separate TX and REC or both as defined by software.
> 3. I plan on using the split outputs to drive a power amp and a LNA on 
> EME. And a single output for driving transverters.
> Any help on this will help me out with transverters.
> Any word on a UCB for the FLEX-5000
> Ed
> WA3BZT
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kb.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/
>
>
>   

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] 144 & 420 MHz unit

2008-01-30 Thread Edward J White

Hi Gang:
Have some questions on the 144 MHz /420 MHz unit for the FLEX-5000.
1. What will the output power be for 144 and 420 MHz.
I need to know as for 902 MHz and above use144 MHz  drive the 
transverters.Or will there be a software power output for using the 
transverter at 144 MHz.
2. Will the outputs of the 144 MHz and 420MHz from the FLEX-5000 be a 
TR/REC one output  or separate TX and REC or both as defined by software.
3. I plan on using the split outputs to drive a power amp and a LNA on 
EME. And a single output for driving transverters.
Any help on this will help me out with transverters.
Any word on a UCB for the FLEX-5000
Ed
WA3BZT

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] Manual for the 1,10,4

2008-01-27 Thread Edward J White

Well I hope that the new manual will come in two types
1. One complete manual
2. Pages that have been changed from 1,10,3. This will save some of us 
that like to have a carry off copy to our reading room fro having to 
print the complete manual again.
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] Important Information from FlexRadio Systems-Dits and Dahs

2008-01-27 Thread Edward J White

And I just ordered a 144 transverter from DEM for EME. Guess I should 
cancel it and get another band instead.

They just made things a lot easier for the Satellites , EME and  
VHF/UHF/SHF contesting.
GREAT JOB
Ed
WA3BZT
 

Richard Beerman wrote:
> What John announced is completely amazing. I am so impressed that this radio 
> supports satellite with full duplex and the optional transverter will be both 
> 144 and 432 MHZ. Just wonderful!  Dick  VR2/W5AK
> 
>   
>> From: [EMAIL PROTECTED]
>> To: flexradio@flex-radio.biz; [EMAIL PROTECTED]
>> Date: Sun, 27 Jan 2008 08:18:23 -0600
>> Subject: [Flexradio] Important Information from FlexRadio Systems-Dits and   
>> Dahs
>>
>>  
>>
>>  
>>
>>  
>>
>> "Dits and Dahs"  Jan 27,2008
>>
>>  
>>
>> This month marks another milestone in the PowerSDR release history.  Version
>>
>> 1.10.4 is now released with numerous new features and bug fixes.  Here's
>> just a small summary of the major changes:
>>
>>  
>>
>> -Independent TX and RX DSP buffers
>>
>> Allows for the best of both worlds: extreme filters on RX (large buffers)
>> and extremely low latency on TX (small buffers).
>>
>>  
>>
>> -New DX Compression Feature (on front panel) Adds 10-20dB of compression to
>> the already excellent compander.  Note: DX is only active when CPDR is on.
>>
>>  
>>
>> -VAC Bypass
>>
>> Now you can grab your microphone and transmit phone even when VAC is active.
>>
>> Just use either the Mic PTT or the back panel PTT signal (X2 on SDR-1000) to
>> bypass VAC.  Note: This can be optionally turned off on the Setup Form ->
>> Audio Tab -> VAC Sub Tab.
>>
>>  
>>
>> -Peak reading TX Meter for DSP Taps
>>
>> The Mic, EQ, Leveler, COMP, CPDR, and ALC taps on the TX Meter are now peak
>> reading meters.  This new visibility helps to calibrate the mic input for
>> optimal phone operation.
>>
>>  
>>
>> -New Front Panel ATU functions for the FLEX-5000 Easy access to TUN/Bypass
>> the ATU with a helpful indicator to show when it is already tuned.
>>
>>  
>>
>> -Front Panel Antenna Display
>>
>> Displays the current settings for RX1 and TX antennas.
>>
>>  
>>
>> -VAC Improvements
>>
>> Several long standing VAC bugs have been addressed.
>>
>>  
>>
>> -NR & ANF DSP Enhancements
>>
>> The NR and ANF functions have been rationalized and should perform much
>> better at all sampling rates.
>>
>>  
>>
>> -MANY misc bug fixes/performance improvements
>>
>>  
>>
>> We would not be able to do this kind of rapid software development without
>> the feedback and ideas that come from this community.  Thanks to the best
>> customers in the world.
>>
>>  
>>
>> On that note, we should mention that we will be changing our development
>> practices starting right away after this release.  The SVN trunk will not
>> change nearly so often as all development will be done in branches.  We'll
>> have more details once we have everything in place if you'd like to continue
>> playing with alpha software.  However, this should allow the trunk to stay
>> as stable as possible.  If all of this is gobletey-gook to you, just rest
>> assured that we are doing everything possible to be more efficient as we
>> develop better radio software for you.
>>
>>  
>>
>> .
>>
>> Others items of interest.
>>
>>  
>>
>> 1. Production Status: All remaining orders listed by sales number on the
>> Production Status page on our web site will be shipped before Feb 1.  
>>
>>  
>>
>> 2.  WE are moving our offices next week to the following address.  
>>
>>  
>>
>>  
>>
>>  13091 Pond Springs Road, Austin, TX 78729. 
>>
>>  
>>
>> Please be patient with us during this week as we settle in.  Our phone and
>> email services should not be affected; however, there is always that chance
>> something could go wrong. If you don't get a reply within 24 hours please
>> try contacting us again.
>>
>>  
>>
>> PLEASE USE THE ABOVE ADDRESS WHEN SENDING ITEMS TO US 
>>
>>  
>>
>> 3. Manufacturing will continue at its present location; however, the service
>> and shipping departments will be relocated to our new office building. We
>> expect to begin shipping from our new facility on or about February 6..
>>
>>  
>>
>> 4. We will be at the Orlando Hamfest from Feb 8-10. Please stop buy for a
>> visit. WE will have both the A and C models on display.
>>
>>  
>>
>> 5. We are pleased to announce that Jeff Anderson, K6JCA, is now an
>> "associate' of FlexRadio Radio Systems. For those of you not familiar with
>> his work, Jeff has inspired numerous great ideas for the console including
>> the current widescreen look with adjustable zoom, and more recently his
>> panadapter/waterfall split display and easy record/playback features.  We
>> value his efforts and ideas so highly that we have asked him to play a
>> greater role in the development of our console and to help us identify and
>> prioritize new features. Please thank him when you have a chance for all
>> that he has done already.  Jeff's changes to the console will

[Flexradio] Monitor

2008-01-22 Thread Edward J White

Hi Gang:
Will a wide screen monitor work with Windows XP. I think with a wide 
screen monitor I can have the SDR and WSJT on the monitor at the same 
time. Or will it be better to have to small monitors? Anybody doing this 
type of set up?
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

[Flexradio] K6JCA console

2008-01-18 Thread Edward J White

Hi Gang:
Where can I down load the K6JCA console?
Ed
WA3BZT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] Multiple versions of PowerSDR

2008-01-16 Thread Edward J White

Good question please let me know also.
Ed
WA3BZT


Robert Dennison wrote:
> Hi all,
>
> Is it possible to have multiple versions available on the hard drive? 
> I'm thinking about running them sequentially not concurrently.  
>
> I would like to a have a fully released version all calibrated and
> interfaced to supporting CAT programs ready for use during serious
> operations.   However, as time allows, I'd  like to participate in SVN
> testing.  Is this possible?  Do things get intertwined in the Registry or
> in some data base somewhere?
>
> Thanks in advance,
> Rob
> AB7CF
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kb.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/
>
>
>   

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] [hpsdr] [Ken SPAM] N8VB announces his new QS1R SDRMAX

2007-12-31 Thread Edward J White

Is this the project that a lot of us sent in money for?
Ed
WA3BZT


Ken N9VV wrote:
> * High Performance Software Defined Radio Discussion List *
>
> Please join me in congratulating Phil Covington N8VB on this 
> exciting New Year announcement:
> -
> Phil Covington N8VB has formed a new Yahoo group called the
> "QS1R" which means "QuickSilver version 1 Receiver". Phil
> has named his software "SDRMAX".
>
> Here is a link to the Yahoo group and another link to Phil's
> home page:
> http://groups.yahoo.com/group/qs1r/
> and
> http://pcovington.blogspot.com/
>
> Phil will create a new SVN repository to hold SDRMAX open
> source software (and firmware) in addition to various
> webpages with pricing, ordering, and time line for the
> new QuickSilver system design.
> -
> Happy New Year,
> de Ken N9VV
>
> ___
> HPSDR Discussion List
> To post msg: [EMAIL PROTECTED]
> Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> HPSDR web page: http://hpsdr.org
> Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/
>
>   

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] Question on ATU FLEX-5000A

2007-12-27 Thread Edward J White

Hi Gang:

Hi Gang:
I am using Flex-5000a the SDR 1.10.3 basic, Drivers 3.0.0.70 Firmware 0.1.1.8.
 Question on the ATU on the setup page of SDR there is a list of the 
 serial numbers of each device but the ATU has [QA] When I put it in I 
 thought it had a serial number placed in it?
 Went to the tab ATU it showed Bypass I moved it to Automatic and it 
 still shows [QA] when I turn off the rig still have [QA] and it is 
 back in bypass.
 Any help please
 Ed WA3BZT



___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] ATU

2007-12-26 Thread Edward J White




> Hi Gang:
> Question on the ATU on the setup page of SDR there is a list of the 
> serial numbers of each device but the ATU has [QA] When I put it in I 
> thought it had a serial number placed in it?
> Went to the tab ATU it showed Bypass I moved it to Automatic and it 
> still shows [QA] when I turn off the rig still have [QA] and it is 
> back in bypass.
> Any help please
> Ed WA3BZT
>
>

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] ATU

2007-12-24 Thread Edward J White

Hi Gang:
Question on the ATU on the setup page of SDR there is a list of the 
serial numbers of each device but the ATU has [QA] When I put it in I 
thought it had a serial number placed in it?
Went to the tab ATU it showed Bypass I moved it to Automatic and it 
still shows [QA] when I turn off the rig still have [QA] and it is back 
in bypass.
Any help please
Ed WA3BZT


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] SDR-5000 and XVTR power

2007-11-11 Thread Edward J White

Let all of us have the answer too please

Dave Blaschke wrote:
> How does one set the power to a low value for output to a 
> transverter? I need milliwatts, not watts, for my LT2S.
>
> Dave, W5UN
>
>
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/
> FlexRadio Homepage: http://www.flex-radio.com/
>
>
>   

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] [www] Updated FLEX-5000 Owner's Manual now available

2007-11-11 Thread Edward J White

Hi Tim:
Has there been any decision on putting out a e mail with just the pages 
that were changed so a person with the manual copied for portability 
(reading room bathroom) so it would be easy to just place the new page 
in the manual. Kind of like the military does with there manuals.
Ed
WA3BZT


Tim Ellison wrote:
> The FLEX-5000 Owner's Manual is now available for download.  The updated 
> manual is based on the released version  of PowerSDR 1.10.3  You can download 
> it from the FlexRadio Downloads page on the web, the main home page or 
> directly using the URL below.
>
> http://support.flex-radio.com/Downloads.aspx?id=183
>
>
> -Tim
> FRS KB Administrator
>
>
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
> http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071107/8af84979/attachment.html
>  
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/
> FlexRadio Homepage: http://www.flex-radio.com/
>
>
>   

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] ATU Iastallation

2007-10-17 Thread Edward J White

Hi Gang:
Have installed the ATU into the FLEX5000A But the instructions sheet says 
Select setup and click ATU Installed Where is this block to check?
Shame the input cable to the ATU is not another inch longer than the ATU would 
connect directly into the HPA100 BNC Connector instead of using a coax jumper.
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071017/5fa272b6/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] FLEX-5000A Manual

2007-10-08 Thread Edward J White

Hi Eric:
No Check out the Table of Contents there is a page number at the end right side 
for each item. They are all wrong
Check Microphone Connection  is page 13 but that info in the book is on page 4.
Ed
WA3BZT
  - Original Message - 
  From: Eric Wachsmann 
  To: 'Edward J White' ; 'SDR-1000' 
  Sent: Monday, October 08, 2007 2:23 PM
  Subject: RE: [Flexradio] FLEX-5000A Manual


  I suspect that what you are seeing is a difference between the PDF page
  number and the page number on the footer of each page.  Please confirm
  whether this is the case.


  Eric Wachsmann
  FlexRadio Systems

  > -Original Message-
  > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
  > radio.biz] On Behalf Of Edward J White
  > Sent: Sunday, October 07, 2007 4:22 PM
  > To: SDR-1000
  > Subject: [Flexradio] FLEX-5000A Manual
  > 
  > Hi Gang
  > Have found a problem with the FLEX-5000A Manual Version 1.10.0 All the
  > pages in the table of Content are incorrect.
  > Ed
  > WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071008/3f4a4022/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] FLEX-5000A Manual

2007-10-07 Thread Edward J White

Hi Gang
Have found a problem with the FLEX-5000A Manual Version 1.10.0 All the pages in 
the table of Content are incorrect.
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071007/4e0400d6/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] Heil connections to the FLEX-5000A

2007-10-07 Thread Edward J White

Hi Gang:
I have been trying to get a Heil GM-5 Mic and a Heil CC-1 cable to work with
the Flex-5000A front panel MIC connector.
I did locate a problem with the CC-1 cable there is no connection to PIN 5 of
the foster 8 pin MIC connection. Also all the ground connections go to PIN 7
Negative MIC shield and one side of the PTT Foot switch and the PTT on the
GM-5.
If this is the correct way that Heil has wired the CC-1 connection we will have
a problem from others (or maybe they wired my cable wrong).
Also the GM-5 has the negative MIC and shield wire connected together inside so
that the connector also connects the grounds to the case of the MIC

The Heil GM-5 is wired as the following using a 4 pin connector.
Pin 1 - MIC and MIC case ground.
Pin 2 + Mic (to capacitor to switch wide narrow)
Pin 3 PTT one side of switch
Pin 4 PTT other side of switch

I found the following with the CC-1 Heil connector Foster 8 pin MIC with foot
switch connector wired as follows.
Pin 8 + from MIC
Pin 7 Negative Mic, Shield, one side of PTT foot switch, one side of PTT GM-5
on the MIC
Pin 6 one side of PTT foot switch and one side of PTT on GM-5 on the MIC.
Pin 5 NO Connection
Pin 4 to 1 No connection.

Anybody else have this problem when using the front panel MIC Connection.

I also have noted that when you short Pins 5 and 6 on the front panel the
FLEX-5000A does not key up??

Have sent Eric W. a email about this.

any help will be great
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071007/b555ade3/attachment.html

[Flexradio] Question on software

2007-10-01 Thread Edward J White

Hi Gang:

I have a question:
 Is there a way to make the frequency / band display so it reads -50db to 
-130db that way the signals will be bigger and not small? will make it easier 
to see all the 100 w stations in the noise? 
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071001/f2df9b48/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] How to open the 5000A case?

2007-10-01 Thread Edward J White

Thank you John and Mark:
I was going to ask the same question tonight but now have the answer.
I did see the FLEX-5000C on Friday and Saturday Looks great.
Ed
WA3BZT

- Original Message -
From: John P Basilotto W5GI
To: 'Mark Mumaw' ; 'FlexRadio reflector'
Sent: Monday, October 01, 2007 5:34 PM
Subject: Re: [Flexradio] How to open the 5000A case?

You mean you didn't get the secret password and hidden instructions for case
removal? Must have been an oversight.

Use your finger nail to pry off the sides ( look for the cutouts). Remove
the 4 torque screws on each side. Two on the top and two on the bottom. Pry
off the top and bottom covers-gently by pulling the sides of the covers
outward. You will need a T-20 torque bit.

Good luck.
John P. Basilotto
W5GI
Chief Operating Officer
Marketing and Sales
Office 512-535-5266
Fax512-233-5143
www.flex-radio.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark Mumaw
Sent: Monday, October 01, 2007 4:21 PM
To: FlexRadio reflector
Subject: [Flexradio] How to open the 5000A case?

I received my 5000A Friday and it is up and running as expected. Now I
want to take a look inside. How do I remove the top and bottom covers?

73's Mark NU6XSedona, AZ

-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20
071001/3e13b4ec/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071001/3df26a2e/attachment.html

Re: [Flexradio] Esdtimated shipping dates for the Flex-5000 by sales order number

2007-09-03 Thread Edward J White

Will there be a e mail about hat and shirt size before shipping or do we just 
send a e mail to you with the info?
Ed
WA3BZT
  - Original Message - 
  From: John P Basilotto W5GI 
  To: Reflector 
  Cc: 'Sales' 
  Sent: Monday, September 03, 2007 10:12 AM
  Subject: [Flexradio] Esdtimated shipping dates for the Flex-5000 by sales 
order number


  This information will also be available on our website later this week

   

  The following is an estimate of the shipping dates for Flex-5000 A first
  production orders by sales order numbers.

   

   

  Sales order numbers Estimated shipping dates


   

  895-995   Sept4
  -  7 

   

  996-1024 Sept10
  - 14

   

  1025-1056   Sept17 -
  21

   

  1057-1119   Sept24 -
  28

   

  1120- 1146 Oct 1  -
  5

   

  The second production run will begin shipping on or about Oct  8.

   

   

  The C-model will begin shipping  in late Sept. 

   

   

   

  John P. Basilotto
  W5GI
  Marketing and Product Manager
  FlexRadio Systems
  512-535-5266

   

  -- next part --
  An HTML attachment was scrubbed...
  URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070903/6abd50bf/attachment.html
 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Knowledge Base: http://kb.flex-radio.com/
  FlexRadio Homepage: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070903/1abc4744/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] Linux question

2007-08-15 Thread Edward J White

Hi Gang:
Once again I have to reach into the vast knowledge of the group for info.
I have built up a new computer  for the FLEX-5000 with TWO HD one for XP the 
other for Ubuntu Linux.My plan is to have the computer ask what drive to go to 
XP or Ubuntu. (Question how do I set that up?) I also want to run duel monitors.
Formatting the new HD for XP no problem but what about formatting the other HD 
for Ubuntu?
I plan to put Ubuntu on latter  ( when I figure what I have to do to get it 
working) . 
All this is so I can run some of the WSJT on EME latter this year after I have 
time to see Joe's K1JT and his super WSJT set up.
I am assuming that we are going to use XP for a long time and not the Vista.
Any help will be great and thank you for supporting the SDR craze.
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070815/16e03f44/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] Heil GM-5 Microphone

2007-07-20 Thread Edward J White

Hi Gang:
Anyone know what the pin out on the microphone Heil GM-5 are There are 4 pins 
1,2,3&4. I am trying to get set up for the Flex 5000. I was told that the cable 
will be CC-1-y  for the Flex 5000. I want to put a switcher box so I can use 
the microphone with another radio.
Ed
WA3BZT
   
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070720/dcb48db3/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] please join me in wishing...

2007-07-03 Thread Edward J White

Happy Birthday and may you birthday be a good day for you to enjoy.
Eat cake it is good for you
Ed
WA3BZT

  - Original Message - 
  From: John P Basilotto W5GI 
  To: Reflector 
  Sent: Tuesday, July 03, 2007 10:58 AM
  Subject: [Flexradio] please join me in wishing...


  Pease join me in wishing Frank a happy birthday.  Frank is our
  shipping/receiving and backup technical support specialist. He is one of the
  unsung heroes in our organization. 

   

  Happy Birthday Frank. How does it feel to be 39 again?

   

  John P. Basilotto
  W5GI
  Marketing and Product Manager
  FlexRadio Systems
  512-535-5266

   

  -- next part --
  An HTML attachment was scrubbed...
  URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070703/0aeb75f1/attachment.html
 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Knowledge Base: http://kb.flex-radio.com/
  FlexRadio Homepage: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070703/c533e687/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] FlexRadio Free T-shit and hat give away!!

2007-06-21 Thread Edward J White

  This is great, Now we can show others that we are owners of the "NOW future 
radio".
  Thanks 
  Ed
  WA3BZT


  - Original Message - 
  From: Tim Ellison 
  To: flexradio@flex-radio.biz 
  Sent: Thursday, June 21, 2007 4:17 PM
  Subject: [Flexradio] FlexRadio Free T-shit and hat give away!!


  FlexRadio just announced that they will include a free "Real Radios
  Don't Need Knobs" t-shirt and a FlexRadio ball cap with every FLEX-5000
  shipped in the first production run.

  See the web page for details

  http://www.flex-radio.com/Default.aspx

  -Tim
  
  FRS KB Administrator

  -- next part --
  An HTML attachment was scrubbed...
  URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070621/a78c2919/attachment.html
 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Knowledge Base: http://kb.flex-radio.com/
  FlexRadio Homepage: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070621/10b64bf7/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] speaker info

2007-06-19 Thread Edward J White

Why don't you take a look at the people at West Mountain Radio 
www.westmountainradio.com  They just introduced a amplified speaker that is RF 
proof. I have not tried them yet but have thought about getting a set. 
Any comments from the user group.
Ed
WA3BZT
  - Original Message - 
  From: elan paim 
  To: flexradio@flex-radio.biz 
  Sent: Tuesday, June 19, 2007 12:27 PM
  Subject: [Flexradio] speaker info


  Hello 
is any one using Edirol MA-7A speaker ?
i wonder if this are computer one or what are they , i am looking 
to buy good speaker ready for the 5000
many thanks


  vy73 
  and all the best 
  Elan g0uut
  -- next part --
  An HTML attachment was scrubbed...
  URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070619/20daa77b/attachment.html
 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Knowledge Base: http://kb.flex-radio.com/
  FlexRadio Homepage: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070619/a9a2db4e/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] Picture??

2007-04-17 Thread Edward J White

Hi Gang:
Has a picture been posited of the SDR-5000?
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070417/c0b7e60e/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] SDR-5000

2007-04-04 Thread Edward J White

I love the term "AMATEUR RADIO RIPOFF LEAGUE" same people that asked us for 
life membership and never having to pay for any awards I guess they have 
another rip off for the Ham.
Ed
WA3BZT
 
  - Original Message - 
  From: W2AGN 
  To: Bob Maser 
  Cc: Flex-radio Reflector 
  Sent: Wednesday, April 04, 2007 6:53 PM
  Subject: Re: [Flexradio] SDR-5000



  "Bob Maser" <[EMAIL PROTECTED]> wrote:
  (04/04/2007 19:23)

  >Why doesn't a Diamond member of ARGL scan the ad and put it on the 
  >reflector for all of us lesser guys to see?  They probably called it the 
  >5000 because it going to be 5 times as much money.
  >
  >Bob W6TR


  If they have the money to be a Diamond member, they are probably  
  afraid  the AMATEUR RADIO RIPOFF LEAGUE would sue.

  John - W2AGN

  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070404/6af3e37b/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] Computer question

2007-03-22 Thread Edward J White

Hi Gang I have a computer question and I love to see if anybody can answer it.
When I grab the bottom where the "START" is and pull it down so the bottom bare 
that runs the full length of the computer goes away I have a bar that 
says"S116E05627" where the "START" was> Does anybody else have this. I am 
wondering if some how it is some spy program. I run Zonealarm and it shows 
nothing. Any thoughts out there with the computer group
Ed
WA3BZT
 
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070322/741c9542/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] AMD 4200 Dual Core

2007-03-17 Thread Edward J White

What is a good video card specks?
Ed
WA3BZT
  - Original Message - 
  From: Tim Ellison 
  To: [EMAIL PROTECTED] ; FlexRadio@flex-radio.biz 
  Sent: Saturday, March 17, 2007 5:39 PM
  Subject: Re: [Flexradio] AMD 4200 Dual Core


  Turn off the Panadapter.  If the pulsing stops, you need to upgrade your
  video card or the driver. 


  -Tim, W4TME
  -


  -Original Message-
  From: [EMAIL PROTECTED]
  [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
  Sent: Saturday, March 17, 2007 6:01 PM
  To: FlexRadio@flex-radio.biz
  Subject: [Flexradio] AMD 4200 Dual Core

  Computer Experts Help:
  I am having this problem with my Flex that I am now convinced is coming
  from my computer.  With a suggestion from Ken I checked my task manager
  with the idea of changing the affinity level but immediately seen that
  the item highlighted was pulsing.  The rate seems to be exactly that
  which appears on the carrier of my SDR.  Anyone know what is causing
  this and can it be disabled???

  Clyde
  W8EGB


  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/

  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070317/737f5c73/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

[Flexradio] How to install Windows Vista]

2007-02-05 Thread Edward J White








-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070205/a79686d7/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

[Flexradio] Question on Linux

2006-12-06 Thread Edward J White

Hi Gang:
Am I correct in saying that HPSDR and SDR-1000 will have support for Ubuntu 
Linux. As that is what the group has decided to use? With the holidays coming I 
thought I would ask for a ubuntu book?
Ed
WA3BZT 
-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20061206/14ab863b/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] Apologies

2006-11-27 Thread Edward J White

This address is failing also???
Ed
WA3BZT

This report relates to a message you sent with the following header fields:

  Message-id: <[EMAIL PROTECTED]>
  Date: Mon, 27 Nov 2006 18:27:08 -0500
  From: "Edward J White" <[EMAIL PROTECTED]>
  To: "Rob McGwier N4HY" <mailto:[EMAIL PROTECTED]>
  Subject: Fw: Feed orns 1.97 and 10 GHZ

Your message cannot be delivered to the following recipients:

  Recipient address: "mailto:rwmcgwier"@gmail.com
  Original address: mailto:[EMAIL PROTECTED]
  Reason: Remote SMTP server has rejected address
  Diagnostic code: smtp;550 5.1.1 No such user d5si23760463qbd
  Remote system: dns;gmail-smtp-in.l.google.com 
(TCP|206.46.252.44|54390|72.14.205.27|25) (mx.google.com ESMTP d5si23760463qbd)

  - Original Message - 
  From: Robert McGwier 
  To: FlexRadio 
  Sent: Monday, November 27, 2006 11:29 AM
  Subject: [Flexradio] Apologies

  I am slowly but surely removing all vestiges of comcast email from my 
  life.   I have just about had it up to my neck with their constantly 
  falling prey to the stupid denial of service to its users by people 
  sending in fake reports to their automated robots.  It is then extremely 
  difficult to get them to change their stance.  It is not possible for 
  the end user to get it worked on at all.  The "offending server" must 
  handle it and yet,  when they attempt to,  they are regularly told 
  everything is or will be alright only to find out that it is not.

  I have not received a flex radio mail message in 10 days.  Because of 
  work and holidays,  it did not come to my attention until Sunday.   
  PLEASE modify your address books for me to reflect my change to use of 
  [EMAIL PROTECTED] as my primary home address for these mailing 
  lists/groups.

  Bob

  -- 
  AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL,
  TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair
  "If you board the wrong train, it is no use running along the
  corridor in the other direction. " - Dietrich Bonhoffer

  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com
-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20061127/fdc987d0/attachment.html

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] Set up for TS Please

2006-11-04 Thread Edward J White

Where is the info for set up for the SDR-1000 
Server Address
User Password
Default Channel
Default Subchannel
Channel Password?

Maybe I need to do this while the TS SDR-1000 is on??
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20061104/17f0d790/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] What happen to the UCB

2006-08-31 Thread Edward J White

Hi Gang:
What ever happen to the UCB Universal Controller Board?
I have not read anything for a long time, The last I read / heard we needed to 
get someone to make the PC boards? And I think I heard / read some was going to 
do it?
Ed
WA3BZT
 
-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20060831/7d69bba3/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] High SWR - Hot Topics button

2006-08-07 Thread Edward J White

Thank you look forward to the mod
Ed
WA3BZT

- Original Message - 
From: "John Basilotto" <[EMAIL PROTECTED]>
To: "Frank Edwards" <[EMAIL PROTECTED]>; ; 
<[EMAIL PROTECTED]>
Sent: Monday, August 07, 2006 4:16 PM
Subject: Re: [Flexradio] High SWR - Hot Topics button


> Frank, please send Steve an ATU shield. If you don't have his address
> contact him direct.
>
>
> John P. Basilotto
> W5GI
> Marketing and Product Manager
> FlexRadio Systems
> Office 512-250-8595
> Mobile 512-663-6727
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
> Sent: Monday, August 07, 2006 12:11 PM
> To: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] High SWR - Hot Topics button
>
> Hi Tim,
>
> I tried that 'button' but it doesn't 'click', using AOL 9.0 so also tried
> I.E. , none of the top buttons work.
>
> Steve - G1LMN
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> /pipermail/flexradio_flex-radio.biz/attachments/20060807/72b19fa5/attachment
> .html
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com
>
>
>
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com 


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] Looking fo Rubidium standard

2006-07-10 Thread Edward J White

Hi Gang:
I am looking for a Rubidium frequency standard to run the SDR-1000 oscillator. 
I know others have done this to run 10 GHz. What is the best price and make 
model where and where should I be looking for one(I know the E place).
Ed 
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20060710/b8b05282/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] Microsoft XP

2006-07-08 Thread Edward J White

Hi Gang:
Well after reading about this Microsoft wga I used the web info Richard sent me 
and removed it. I also have turned off windows updates. Now I hope that 
ZoneAlarm protects me.
The suggestion from most of the groups advise me to head for Linux. Yes I think 
I will start on that path. I guess I should head for the Linux that the 
SDR-1000 is going to use as that is where I plan on going into the future of 
communications. Better learn now or get lost in the dust. I guess as I look 
back learning CW for my license was a lot easier than this computer stuff that 
you have to keep on learning.
Now to see what Linux the Flex group is using. Next check with the local Tech 
Collage and see if they have a course
People thank you for the great help, I know Hams always help others
Ed
WA3BZT
SAY GOODBYE TO MICROSOFT
  - Original Message - 
  From: Edward J White 
  To: Moon Net List ; Microwave Lists ; SDR-1000 
  Sent: Friday, July 07, 2006 9:55 PM
  Subject: Microsoft XP


  Hi Gang:
  Has anybody heard about "Microsoft" sending a notice out  and putting a 
program on your computer that says "you may be a victim software 
counterfeiting" This is what a star in the lower left hand screen next to the 
time. There is also a screen that comes up and informs you that you can fix 
this problem by getting a registered copy or paying them $145
  If this is the real deal than my XP system is a copy of  an original. This 
might be the fact as I had the system XP put on the HD by a computer  store 
(now closed)
  But if this is a real deal than Microsoft is and has been spying on there 
software.
  It is not the real deal than there is a virus or something new going around.
  I wonder if anybody else has heard about this.

  I often wonder if Microsoft is collecting info from our computers and is now 
wanting to collect big bucks by scaring people into paying higher prices to get 
more money for there NEW BOSS.

  If this is true than it is time to go to Linux and screw Microsoft.
  Ed
  WA3BZT

-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20060708/009087db/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] Microsoft XP

2006-07-07 Thread Edward J White

Hi Gang:
Has anybody heard about "Microsoft" sending a notice out  and putting a program 
on your computer that says "you may be a victim software counterfeiting" This 
is what a star in the lower left hand screen next to the time. There is also a 
screen that comes up and informs you that you can fix this problem by getting a 
registered copy or paying them $145
If this is the real deal than my XP system is a copy of  an original. This 
might be the fact as I had the system XP put on the HD by a computer  store 
(now closed)
But if this is a real deal than Microsoft is and has been spying on there 
software.
It is not the real deal than there is a virus or something new going around.
I wonder if anybody else has heard about this.

I often wonder if Microsoft is collecting info from our computers and is now 
wanting to collect big bucks by scaring people into paying higher prices to get 
more money for there NEW BOSS.

If this is true than it is time to go to Linux and screw Microsoft.
Ed
WA3BZT
 
-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20060707/76a3f606/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] vSound Developement Fund

2006-06-04 Thread Edward J White

I am in and paid
Great idea great group of people! 
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
/pipermail/flexradio_flex-radio.biz/attachments/20060604/01593497/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] vSound Development Fund - Goal Update

2006-06-04 Thread Edward J White

What is the PayPal address to send the money
Ed
WA3BZT
- Original Message - 
From: "Tim Ellison" <[EMAIL PROTECTED]>
To: "Philip Covington" <[EMAIL PROTECTED]>; 
Sent: Sunday, June 04, 2006 11:03 AM
Subject: [Flexradio] vSound Development Fund - Goal Update


> By my count, from the people who have responded on the reflector that
> said they have contributed and indicated a dollar amount, we have
> reached the $400 mark in less than 24 hours.  That is 80% of the $500
> target bounty for getting vSound development started.  That is a
> fantastic response, but there is just a little bit further to go, so
> let's take it home!
> 
> I am sure I speak for all Flexers in saying thanks 1x10^7 to Phil for
> offering to free us from the shackles of VAC.
> 
> -Tim
> ---
> Tim Ellison  
> Integrated Technical Services   
> Apex, NC USA
> 919.674.0044 Ext. 25 / 919.674.0045 (FAX)
> 919.215.6375 - cell
 PGP public key available at all public KeyServers <<<
> Skype: kg4rzy
> 
> 
> 
> 
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] 6 Meters & the SDR

2006-05-26 Thread Edward J White

Hi Gang:
Yes a separate Rec and Transmitter for the 6 mtr would be a great idea. But 
I think it would have to be a T/R relay and UCB (if it ever comes out) to do 
this?
Ed
WA3BZT

- Original Message - 
From: "Dave & Nancy Ridge" <[EMAIL PROTECTED]>
To: 
Sent: Friday, May 26, 2006 5:23 PM
Subject: [Flexradio] 6 Meters & the SDR


> Hi Scott, no the preamp is not a kit. Check out DownEast net site. I am 
> going to use a TE Systems amp that will take .5 watt SDR on 6 meters to 
> 100+ watts and then drive my Acom1000 amp to 1000+watts.
>
> Hi Ken, at present I am connecting the DE preamp to the QRP connector. 
> When I get the TE Systems amp I will need to work out a scheme to isolate 
> RF switching between the SDR receiver and the SDR transmitter to drive the 
> TE Systems amp on transmit. I, like you asked, am not sure how to do this. 
> I hope someone will chime in and explain how.
>
> I wish the SDR had a separate BNC's to the receiver and to the 
> transmitter. Not sure how the SDR switches the T/R. I assume with diodes.
>
> 73, Dave, W9DR
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
> /pipermail/flexradio_flex-radio.biz/attachments/20060526/6ab23524/attachment.html
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: 
> http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com 


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] PA Installation

2006-05-07 Thread Edward J White

Hi Gang
Where is the installation instructions for the 100 W PA?
Ed
WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20060507/9e9959d6/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] documentation roadmap

2006-02-21 Thread Edward J White

Yes this is what I am requesting. This will make it easy to change and see 
what is changed in the manual

Ed
WA3BZT
- Original Message - 
From: "ab7r" <[EMAIL PROTECTED]>

To: "Edward J White" <[EMAIL PROTECTED]>; 
Sent: Monday, February 20, 2006 2:10 PM
Subject: RE: [Flexradio] documentation roadmap

Navy manuals are updated in this manner, or use to.  It's called a List of
Effective pages and looks something like this:

Page Change

1
2
3  CH 1
4  CH 1
5
6
7  CH 3

etc.

Greg
AB7R

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Edward J White
Sent: Monday, February 20, 2006 7:25 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] documentation roadmap

I think we should have a page that shows which page has been changed. Some
of us use the manual to read about the operations and changes to the 
system.

This could be done by listing each page that is changed on a CHANGE PAGES
sheet. this way it would allow all of us to see what has changed each time
the manual is updated. Use the current manual as the original and all 
pages

there after will show on the CHANGE PAGE.
Ed
WA3BZT

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/

FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] documentation roadmap

2006-02-20 Thread Edward J White

I think we should have a page that shows which page has been changed. Some 
of us use the manual to read about the operations and changes to the system.
This could be done by listing each page that is changed on a CHANGE PAGES 
sheet. this way it would allow all of us to see what has changed each time 
the manual is updated. Use the current manual as the original and all pages 
there after will show on the CHANGE PAGE.

Ed
WA3BZT

Re: [Flexradio] Howcum?

2006-02-15 Thread Edward J White

Ok on the hard drive why not build a separate hard that you can just pull 
out. I have a windows XP in now but latter can add another plug in drive and 
can run Linux that way I do not have to have any MS system on the computer.

Ed
WA3BZT
- Original Message - 
From: "Simon Brown (HB9DRV)" <[EMAIL PROTECTED]>
To: "Eric Ellison" <[EMAIL PROTECTED]>; "'Frank Brickle'" 
<[EMAIL PROTECTED]>

Cc: <[EMAIL PROTECTED]>; 
Sent: Wednesday, February 15, 2006 9:59 AM
Subject: Re: [Flexradio] Howcum?

In case anyone is interested in trying Linux - VMware have made their 
server

free of charge (crazy guys)!

http://www.vmware.com/products/server/

So you can run Linux and Windows on the same PC simultaneously.

Simon Brown
---
http://blog.hb9drv.ch/

- Original Message - 
From: "Eric Ellison" <[EMAIL PROTECTED]>

The Linux console would be a more 'for fun' or 'because we could' 
project.

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] article on agc

2006-02-12 Thread Edward J White

Hi Willi:
thank you for the posting.
Ed
WA3BZT

- Original Message - 
From: "Willi Reppel" <[EMAIL PROTECTED]>

To: "Jiri Sanda" <[EMAIL PROTECTED]>
Cc: "FlexRadio" 
Sent: Sunday, February 12, 2006 7:11 AM
Subject: Re: [Flexradio] article on agc

Hi Jiri,

You can find the article at:

http://www.n9vv.com/VK6APH-AGC-discussion-SDR1000.pdf

Best 73 de SM6OMH  Willi

- Original Message - 
From: "Jiri Sanda" <[EMAIL PROTECTED]>

Cc: "FlexRadio" 
Sent: Sunday, February 12, 2006 11:22 AM
Subject: Re: [Flexradio] article on agc

I would love to read such an article - probably others would too -
please place it somewhere when ready.

73 !

Jiri
OK1RI

On Fri, 10 Feb 2006, Robert W McGwier wrote:

Klaus:

I need to return to the documentation of the entire dsp, so that is as
good a place as any to start.  Would visio output in pdf form be good?

I have to write a few dozen page document in anticipation of an
important TeamSpeak teleconference for Tuesday.  Please do not expect it
before that.

Bob

[EMAIL PROTECTED] wrote:

Hi Bob, Eric and Gerald,

I am writing an article about the nature of SDR-1000 and the
philosophy behind FlexRadioSystems i.e. to offer the software to
everyone, the contributions the users provide in describing what they
want or even augmenting the coding and so on.

A good example is the AGC. I will refer to Phil's concept (which has a
significant educational value) and describe the implementation in
PowerSDR. For this step I ask for your help. I don't want to show
lines of codes (maybe I am wrong and you suggest to show a few
decisive lines ?) but I want to describe where the processing takes
place. I want to draw a picture showing the structure of the software
- the "digital signal chain" from the mic to the soundsystem output.

Can you please provide some information to make this happen? Thanks a
lot.

Have a nice weekend and a successful townhall meeting!

vy 73 - Klaus, DK7XL

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

--
Robert W. McGwier, Ph.D.
Center for Communications Research
805 Bunn Drive
Princeton, NJ 08540
(609)-924-4600

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] Log Program

2006-02-04 Thread Edward J White




Hi Gang:
What log program is being used / supported for 
SDR-1000, will it work for VHF, UHF,SHF with XMT and REC freq. 
entry?
Ed
WA3BZT

[Flexradio] Manual

2005-12-23 Thread Edward J White




Hi Gang:
Any idea when a new update will be.
Ed
WA3BZT

Re: [Flexradio] SDR-1000, "Second Order" tests, and 80 db and other.....

2005-09-18 Thread Edward J White

Hi Gang:
Well after reading all the e-mails posted here about SDR- Gerald 
answered my question well.  I am waiting to get the parts for ECO-020 and 
025 I will also install  when I remove the radio to install  the PA / 
antenna tuner.ECO-001,002,0011, 012, 018. This should then bring my SDR-1000 
up to the top line radio that it is and will be for some years to come. I 
can invision other external programs / hardware to the SDR-1000 so this 
great radio will work just about every mode known to radio communications 
for a long time.

Ed
WA3BZT
- Original Message - 
From: "Gerald Youngblood" <[EMAIL PROTECTED]>
To: "Edward J White" <[EMAIL PROTECTED]>; "Robert McGwier" 
<[EMAIL PROTECTED]>; "Tom Thompson" <[EMAIL PROTECTED]>

Cc: 
Sent: Thursday, September 15, 2005 8:04 PM
Subject: RE: [Flexradio] SDR-1000, "Second Order" tests,and 80 db and 
other.

Ed,

We just upgraded the radio in July to give it top performance 3rd order
dynamic range of any radio on the market.  We also made the modifications
available to every customer since day one.  We really should be calling 
the

current radio something like the SDR-1500 because it has been through
several upgrades that have been available to all customers.

Most of the additional improvements to the SDR-1000 will come through
software enhancements.  We have a built in impulse generator that will 
soon

let us use software to perfect image rejection and produce exceptional
impulse noise subtraction.  That will be a download.  This is a SOFTWARE
radio.

73,
Gerald

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Edward J White
Sent: Thursday, September 15, 2005 5:34 PM
To: Robert McGwier; Tom Thompson
Cc: Flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDR-1000, "Second Order" tests,and 80 db and
other.

We have to hope that Gerald produces a new
 version of the SDR with all we have learned
Does this mean that the SDR-1000 we now know will stop being and another
SD- will be comming ? Or do you mean that we will be upgrading the
hardware to make a better system?
Ed
WA3BZT

- Original Message -
From: "Robert McGwier" <[EMAIL PROTECTED]>
To: "Tom Thompson" <[EMAIL PROTECTED]>
Cc: 
Sent: Thursday, September 15, 2005 5:06 PM
Subject: Re: [Flexradio] SDR-1000, "Second Order" tests,and 80 db and
other.

> As I have said before,  the other developers and I owe the user/owners
> of the SDR-1000 a great debt of gratitude for being our guinea pigs and
> laboratory.  The past many months have produced a remarkable machine 
> and

> increasingly good software.  The software is about to take a departure
> as we bring really modern (FREE) software development tools to bear on
> the next generation of code.  We have to hope that Gerald produces a 
> new

> version of the SDR with all we have learned and as such, we have to
> design with more modularity and ease of facilitating MANY to contribute
> so this can continue well into the future.
>
> Bob
>
>
>
> Tom Thompson wrote:
>
>> Bob,
>>
>> Thank you for the comprehensive details on where some of the issues on
>> the SDR-1000 stand.  Also, thank you and all of the other software
>> developers for all of the many hours that you have spent making this
>> radio as exciting as it is.  I know that it may seem that we users are
>> insatiable in our requests for changes, but knowing the huge software
>> effort that you have put forth, we do appreciate you.
>>
>> 73,Tom   W0IVJ
>>
>
>
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

Re: [Flexradio] SDR-1000, "Second Order" tests, and 80 db and other.....

2005-09-15 Thread Edward J White


We have to hope that Gerald produces a new
version of the SDR with all we have learned
Does this mean that the SDR-1000 we now know will stop being and another 
SD- will be comming ? Or do you mean that we will be upgrading the 
hardware to make a better system?

Ed
WA3BZT

- Original Message - 
From: "Robert McGwier" <[EMAIL PROTECTED]>

To: "Tom Thompson" <[EMAIL PROTECTED]>
Cc: 
Sent: Thursday, September 15, 2005 5:06 PM
Subject: Re: [Flexradio] SDR-1000, "Second Order" tests,and 80 db and 
other.




As I have said before,  the other developers and I owe the user/owners
of the SDR-1000 a great debt of gratitude for being our guinea pigs and
laboratory.  The past many months have produced a remarkable machine and
increasingly good software.  The software is about to take a departure
as we bring really modern (FREE) software development tools to bear on
the next generation of code.  We have to hope that Gerald produces a new
version of the SDR with all we have learned and as such, we have to
design with more modularity and ease of facilitating MANY to contribute
so this can continue well into the future.

Bob



Tom Thompson wrote:


Bob,

Thank you for the comprehensive details on where some of the issues on
the SDR-1000 stand.  Also, thank you and all of the other software
developers for all of the many hours that you have spent making this
radio as exciting as it is.  I know that it may seem that we users are
insatiable in our requests for changes, but knowing the huge software
effort that you have put forth, we do appreciate you.

73,Tom   W0IVJ




___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

[Flexradio] question

2005-08-02 Thread Edward J White




What connection to the computer is the best to use 
USB or parallel cable. I have each on my 
computer? Is there any advantages of one or the other?
Ed
WA3BZT

Re: [Flexradio] Operating Manual

2005-07-24 Thread Edward J White


Hi Gang:
I think that there should be two manuals one that is the current full manual 
and the other that contains the changes on the web. This way lets say you 
have version 0.6 and version 0.8 is the current version on the web then all 
you will have to down load will be changes 0.7 and 0.8 toss old the pages 
away and you will have the current manual. As for the pages changing just 
add a page list to the end that tells you page xx was deleted and page 16 
was extended into 16A (new page). This is the way the military flight 
manuals are. Simple does a good job and once every two years they do a full 
manual change.

I think this will help out a lot with the down load and copy of the manual.
What do you think  Eric and Gerald?
Ed
WA3BZT
- Original Message - 
From: "ecellison" <[EMAIL PROTECTED]>
To: "'Klaus Lohmann'" <[EMAIL PROTECTED]>; "'FlexRadio'" 


Sent: Sunday, July 24, 2005 12:32 PM
Subject: Re: [Flexradio] Operating Manual



Klaus

I think we probably would all like chapter relative updated manuals. Saves 
a

lot of work for Eric1 also. There needs to be a way of handling the manual
as a 'program' like they do the software updates.

Eric - AA4SW


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Klaus Lohmann
Sent: Sunday, July 24, 2005 8:02 AM
To: FlexRadio
Subject: [Flexradio] Operating Manual

Hi Gerald and others,

I know that writing documentation is a tremendous amount of work. Thanks 
for
the manual so much. Like many others I love to read and work with manuals 
as

printouts. I can't get used to read and work on the screen. Like the
software the manual is a living document. Maybe my suggestion is not new 
(if

so I apologize for that) but I would be glad if the manual will be updated
in future by publishing changes only i.e. by deleting, changing and adding
new pages or even making pen and ink changes only - whatever is 
appropriate.


I know that this will need a new page count (counting chapters and related
pages) but it will be worth the saving of ink and paper.

Again thanks for your efforts and good luck!

Klaus, DK7XL

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

Re: [Flexradio] Live Hotel Video link

2005-05-21 Thread Edward J White


Has anybody looked at the video? I can not hear audio?
Any help?
Ed
WA3BZT

- Original Message - 
From: "Ken Hopper N9VV" <[EMAIL PROTECTED]>

To: 
Sent: Thursday, May 19, 2005 8:03 PM
Subject: [Flexradio] Live Hotel Video link



Eric AA4SW has a live video link in his hotel room
http://aa4sw.ww.com/
on behalf of Eric
de Ken

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

62 matches

Mail list logo