[Flexradio] Mute doesn't work with VAC
With my 5K I'm using VAC to route audio to my onboard sound card. I have the powered speakers connected to line-out on the sound card. Am doing this in order to hear audio from both the 5K and from online streaming (YouTube, etc). It works just fine except for one thing: the Mute button on the console doesn't work (which doesn't surprise me). Is there another way to obtain the Mute function (short of hitting the Stop button)? I guess I could forget about VAC and run a cable from the 5K speaker output to line-in on the sound card, but would prefer to keep using VAC. Thanks and 73, Rod KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Any way to fiddle with PA bias settings?
In performing some two-tone tests at different power levels on my 5k I've discovered some interesting things concerning IMD products. Using the BITE utility I can measure bias currents for both the driver and PA Final, but do not see any way of changing them. (BTW, my PA bias is nominally 2.3A which seems high to me, however I seem to remember Tim saying that it has been increased to "improve voice quality"). Anyway, I'd like to experiment with different bias levels. Is there a way to do that? 73, Rod KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Must turn on PSDR twice
I too have this problem. I believe it's related to the default Sample Rate that comes up on startup in Flexradio Global Settings (blue icon on the desktop). If the default doesn't match the sample rate last used in the main program (in Setup/Audio), it takes two starts to get them in sync. In my case I always run at 96k but the default in Global Settings frequently (but not always) comes up 48k. Then it takes two starts. If the default comes up 96k it takes only one start. I'm running W7. Don't know if that has anything to do with it. I've mentioned this before to Flex Support but apparently they don't see this happening in the lab. 73, Rod KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] v2.3.5 and W7?
I had trouble installing v2.0.22 on my W7 machine (late model i5 core, "right" Firewire card, etc). Neal Campbell had to finally bail me out by taking over my machine via TeamViewer and working his magic. I still don't know exactly what he did - it all went so fast. So now I'm timid about installing v2.3.5 for fear that history will repeat itself. I'd be very interested in hearing from any W7 users as to how their v2.3.5 install went.. 73, Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] power-up issue (cont.)
See Tim's response on this: http://www.mail-archive.com/flexradio%40flex-radio.biz/msg46262.html 73, Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] [Flex radio] Power up problem
Tim - Makes sense. Thanks for the good explanation. 73, Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] [Flex radio] Power up problem
The 48K sampling rate shown in the Firewire control panel is the default setting on power up. PowerSDR, during the initialization, will instruct the the Firewire driver to re-set the sampling rate to the one configured in Setup. We have seen occurrences where this communication between PowerSDR and the radio does not complete properly resulting in the behavior. We have notified the developer of the Firewire driver of this problem and hopefully it will be resolved in a future release of the driver. -TimTim -If the sampling rate in the Firewire control panel was STORED instead of defaulting to 48K every time, wouldn't that resolve the problem?Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] [Flex radio] Power up problem
Tim - This startup problem occurs immediately after my machine is booted up, so there's no opportunity for hibernation. Also my power management is set to High Performance. The problem seems to be caused by initial difference between the default sample rate in Flex Radio Global Settings (48K) vs the 96K I've selected in PSDR. It takes two startup tries for them to get "in sync". If instead of 96K I select 48K in PSDR, there's no problem and it starts up on the first try. Am running W7, 64 bit. There are at least two others having the same (or similar) problem, so it's not just me. 73, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Power up problem
Jim - You didn't mention your sample rate but am guessing it's more than 48K. I run 96K and have the same problem as you. I've found that PSDR will run the first time if after bringing it up BUT BEFORE STARTING you go to the Flex Radio Global Setting icon and change the default 48k sample rate to 96K (or whatever in your case). Have talked to Dudley about this but he hasn't seen it anywhere else. So I just live with it.. 73, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] New Year's PC Resolution
Well, I didn't have such good luck. Windoz xp Pro wants me to insert my original CDROM. Problem: no got. Xp came installed on my computer. When I tried backing out of the utility, it got kinda nasty and wouldn't let me do it without coughing up that missing CD. Finally had to shut off the power. Fortunately no stink bombs were left behind because the computer booted up again with no apparent memory of what happened. Whew... Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Why doesn't MON button work in AM
In AM mode the MON button is greyed out and the monitor function disabled. I first noticed this when I recorded another station and played it back to him over the air. I could see it on the panadaptor and the other station heard it OK, but all I heard in my speaker was some feedthru squeaks. This seems to be the case in late versions of PSDR as well as earlier versions. Am running the Flex 5K and get the same results with both Windows xp and W7. Why is MON disabled in AM? Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Installation didn't go so well
Problem resolved thanks to Neal Campbell. What a SUPER guy. Hooked me up to his TeamViewer wherein he wiggled around my computer so fast I couldn't keep up and fixed everything. I probably shouldn't go on raving about him since he admonished me not to, but can't help it. THANK YOU, Neal Best 73s Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Installation didn't go so well
I deleted all Flex programs using the Windows program uninstall utility. Then downloaded v.2.0.22 again. This time it went through the installation procedure the same way it did the first time. After the computer reboot and the radio turn-on, I got the same error message that the device driver had not been successfully installed. And this time I noticed the reason: no driver found. Does that help? Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Installation didn't go so well
Tim - Previous version was 2.0.22 running on older Windows xp machine. It ran fine altho a bit slow. BTW, we're talking about a Flex 5K... Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Installation didn't go so well
Tim - Previous version was 2.0.22 running on older Windows xp machine. Different Firewire card. It ran fine altho a bit slowly. One other thing - I didn't install the driver software that came with the new Firewire card. I just plugged it in and Windows 7 didn't appear to object. I figured it didn't matter since the Flex driver would be installed over it anyway. BTW, it's a 5K we're talking about... Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Installation didn't go so well
Am attempting to bring up PSDR v.2.0.22 for the first time on a new computer. Windows 7, 64-bit. Firewire card successfully being used by others with similar machines: http://www.amazon.com/Syba-Profile-PCI-Express-Chipset-SD-PEX30009/dp/B002S53IG8/ref=sr_1_1?s=electronics&ie=UTF8&qid=1311177055&sr Everything was going along nicely per the Quick Start Guide until I got error message that the drivers were not successfully installed. I had Windows Auto Update disabled at the time (exasperated by the daily updates). That may have been the problem according to the subsequent explanation messages, altho I don't see why. Anyway, I turned Auto Updates back on and started the whole process over. But now it never gets to the point where the computer is shutdown and the radio gets turned on. If I turn on the radio anyway, its only operational mode is Demo. I've tried completely removing v.2.0.22 and downloading a fresh batch. Even tried downloading the latest v.2.1.5. Same problem. I tried searching for database.xml do delete it, but nothing came up. I guess that applies only to older versions running under Windows xp? So I seem to be stuck. Tim or anybody else: any suggestions? Thanks and 73, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Getting a sinking feeling...
Thanks Neal, Richard, and Konrad. I understand now why this reflector is so popular. You ask a question and almost immediately you receive well-informed answers. Much appreciated, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Getting a sinking feeling...
Just received my new "super" computer that I ordered specifically to operate my Flex 5K. OS is Windows 7, 64 bit. When I opened the case to install my PCI Firewire card I discovered to my chagrin that the expansion connectors are PCI Express only. So now I need to order another card. But which one?? Newegg has various PCI-E cards from Syba, StarTech, Vantec, etc - but I can't tell if any have the favored Lucent or TI chipsets. I'm also worried about the fact that my new system is 64-bit. Can anybody recommend the right card to buy? Slightly upset, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] v.2.0.22 startup problems
Tim - The 5K is new to me (second-hand) and v.2.0.22 is my first experience with PSDR. Lee K9WRU has had the same problem and has theorized that it might be a symptom of an "over-the-hill" computer. At his suggestion I am now slow-clicking the PSDR icon to prevent ghost versions from starting up. That may simply be the solution... 73, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] v.2.0.22 startup problems
Am having trouble starting up v.2.0.22 on my 5K. There are three scenarios: 1) I double-click on the PSDR icon and nothing happens. When I double-click again, I get error message that other PSDR instances are running. The only way to recover is to restart my computer. 2) After double-clicking the icon, the startup screen comes up but the startup sequence gets only about 1/3 of the way through and the startup screen abruptly disappears. Double-clicking again usually succeeds but sometimes it takes three tries. 3) Everything comes up properly on the first try. This doesn't happen very often. I have tried both power-up sequences: power-up computer first, then radio and vice-versa. Doesn't seem to make any difference. Am running Windows XP, SP3. CPU is Celeron 2.40 Ghz. 480MB RAM. Have not seen this problem on the reflector and gather that I'm doing something stupid. Suggestions welcome. 73, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] 5K PA and Driver bias readings
I have the preliminary 2007-2008 service manual for the 5K and am running the BITE tests. It states that the bias currents for the driver and PA should be 200 ma and 1.4A, respectively. The actual values I'm getting are considerably higher than that: 1.0A and 2.264A(nominal). These values are confirmed with an ammeter placed in series with the +13.8v power supply. Am guessing they are correct and that they've been intentionally increased since the original service manual was published. Is this the case? Parenthetically, the values shown in the Debug window vary quite a bit from reading-to-reading, although the actual ammeter current remains constant. This seems puzzling... 73, Rod ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Delta 44 problem
I know I'm wy behind the times but am still happily running the SDR1K. Well, semi-happily. I've got a peculiar problem with the Delta 44 sound card driver. It works fine at 48k sample rate but not at 96k. Here's the kicker - if I reinstall the driver (5.10.00.5057v3) it works fine at both sample rates. But when I shut down the computer and restart, the 96k doesn't work anymore. Something is getting trashed either during shutdown or startup. Now for my mea culpa. On the same computer I once tried to get the SoundBlaster Audigy2 ZS to work. I installed the SoundBlaster drivers but never got the card to work. So I gave up, uninstalled everything (I think), and bought the Delta 44. Which is what I've should have done in the beginning. I'm thinking there's an evil SoundBlaster gremlin leftover that's causing the grief. Anybody have any idea how I can find and destroy the gremlin? 73, Rod Brink ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Fault trouble with Alpha 8410
Am having problems operating a SDR-1000 in ESSB mode into my new Alpha 8410. The amp frequently faults on voice peaks in spite of a much reduced drive level. I looked at my peak power into the amp using a fast peak-reading wattmeter (LP100A). Most of the time the power peaks are in the 10-15 watt range, but on some words the peaks are much higher, 30-40 watts. I turned up the mic gain to get 0 dB ALC readings and turned down the drive to compensate, thinking that would resolve the problem. It helped but didn't completely do the trick. Next I decreased the ALC attack time to 1 ms. That doesn't help either, nor does changing the ALC Decay and Hang times. The Alpha fault-detection circuits are very fast acting. I complained to them about it, but to no avail. They seem to think it should be that way. As a matter of personal preference, am running an earlier version of PSDR (v. 1.12.1). Have any improvements been made to ALC in subsequent versions? 73, Rod KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] SDR 1000 and Audigy 2 VS
Has anybody had experience running a SDR 1000 with the SoundBlaster Audigy 2 VS card? It has three Line-Out jacks which probably will require some trial-and-error to see which one properly goes to the Line Out on the SDR. No big deal but it might be nice to know in advance how to hook the darn thing up. Can't find anything on this in the Knowledge Base. Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Flexradio] No output/receive
I had that problem on 60M. Turned out it was a failed part on the RFE board - one of the solid-state relays K17. Mine was shorted. If your problem is similar then it might be either K7 or K20. I ordered the part from Flex (about $3 incl. shipping) and replaced it myself. Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] SDR-1000 for sale
FOR SALE: SDR-1000 w/100 watt PA, Delta-44 sound card, all cables. Has all factory mods/upgrades. Includes proportional speed fan controller that keeps fan nearly silent at room temp, then gradually speeds up as heatsink warms. Looks good, works perfectly. $650 plus shipping. Pictures available upon request. Please contact by email: k...@comcast.net TNX, Rod KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] RF Preamp in SDR-1000
I don't fully understand how the RF Preamp in the 1000 works. There are four settings on the console: High, Med, Low, and Off. But in looking at the RFE board schematic, I see only two possibilities - one with the Preamp switched in and the other with a resistive attenuator switched in at the Preamp input. I can't see the other two possibilities, especially Off. How is it switched off?? Scratching my head ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Anybody using Audigy sound card?
Is anybody using the SB Audigy 2 (PCI) sound card? I'm told it's much quieter than the Delta 44 card I'm using with my SDR-1000. I'd like to hear from anybody who has compared the performance of these two cards. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] FW: Flex3000 SSB TX bandwidth only 3.65k?
Am puzzled about this. Until Eric clarified I thought the same as Ray - any bandwidth limitation would have to be imposed by PowerSDR. Since the latest PowerSDR v.1.18.0 does not have a selection for the 3000 in the Setup menu, I figured you'd be able to select any bandwidth you want - same as 1000 and 5000. So apparently they do the high cut in the 3000 hardware somehow - right? Eric Wachsmann Mon, 04 May 2009 15:48:55 -0700 Actually, there is a limit of 3650Hz on the high cut for each sideband (i.e. 7.3kHz on AM/FMN/DSB) when using the FLEX-3000. Eric Wachsmann FlexRadio Systems "*Tune in Excitement!" ^(TM)* On Mon, May 4, 2009 at 5:45 PM, Ray Andrews wrote: Stig, You may have misinterpreted the FLEX-3000 specifications. The spec says, "Flat Response 10 Hz to 3.650 KHz (SSB)". This means that the audio response is flat within that range and no guarantees are made outside of that range. It does not mean that the TX audio is limited to 3.65 kHz. The actual transmit filter width that can be set is entirely controlled by the software. Therefore, it is the same for the FLEX-3000 as it is for the SDR-1000 and the FLEX-5000. If you increase the transmit filter width to greater than about 3.1 kHz, the software will give you a warning about compliance with all applicable rules & regulations. However, you can ignore the warning and increase the filter width to whatever you desire. The Federal Communications Commission, the government agency that regulates the Amateur Radio Service in the United States, has recently ruled that ESSB is "not in accordance with good amateur and engineering practice" on the crowded HF bands. Therefore, US amateurs are not supposed to use ESSB on HF. If I am wrong on this, someone from Flex can shoot me down, but the way I understand it, you should have no problems using the FLEX-3000 for ESSB. Just don't do it in the United States. 73, Ray, K9DUR ___ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Good mic for SDR 1000 or 5000A
If you wanna sound like Bing Crosby, try a Cascade Victor ribbon mic Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] S-meter type
The PowerSDR feature list indicates there are two S-meter displays that can be selected - edge type and LED bar graph type. All I've ever seen is the edge type. How do you change to the LED bar graph type? Can't find anything about it in KC.. Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] 3000 Interior View
Can we see an interior view of the SDR 3000? Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] SDR1K Suppressed Carrier
Is there an adjustment in the SDR1K for improving SSB carrier suppression? My suppression is poor on the high bands. Thanks. Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Suppressed carrier
I've noticed that with my SDR1K the suppressed carrier on SSB becomes less suppressed as I go up in frequency. On 10M it's pretty bad. Am wondering if the SDR5K does better in this department..? Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Media Player-to-PowerSDR via VAC?
Is there a way to pipe output from Windows Media Player to PowerSDR using VAC? I've fiddled with it but so far haven't found the key to success.. Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
