[Flexradio] ShuttlePro Preferences File

[Gary Carter]

I'm still reloading software after my OS upgrade to Windows 7 , 64 bit. 
In trying to import the Contour ShuttlePro 2 preference file I 
downloaded from the Flex Radio web site the ShuttlePro control panel (v 
2.81) says it can't import the file because it appears to be corrupt. Is 
there a good working copy of this file out there?


Gary - WA4IAM

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] ShuttlePRO

[Dave Walker]

I reckon its a must have. I only use it for fine tuning CW sigs. And use mouse 
for jumping around and pouncing.  

I set the dial to tune in 100hz increments. Buttons for 5 khz tuning. 

Cheers 

Dave
VK2NA

sent from my Telstra NEXTG™ handset

- Reply message -
From: "W8HW" 
Date: Mon, May 9, 2011 10:20 am
Subject: [Flexradio] ShuttlePRO
To: 

Has anyone used the "ShuttlePRO" and how do you like it. What configuration did 
you decide to use. Does it work well as VFO?

73, Bruce, W8HW

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] ShuttlePRO

[W8HW]

Has anyone used the "ShuttlePRO" and how do you like it. What configuration did 
you decide to use. Does it work well as VFO?

73, Bruce, W8HW

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] ShuttlePro

[Dan Scott]

I would like to add onto Dave's question.

Can the Shuttlepro be used for RIT?

Dan

On 1/19/2011 11:38 PM, David Walker wrote:

Hi folks,

I am contemplating a shuttlepro for tuning.  I was wondering if there 
is any latency between the device and the tuning of the radio?


Sorry if this has been the muse of countless prior discussions that I 
have missed.


Regards,

Dave

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/


__ Information from ESET Smart Security, version of virus 
signature database 5801 (20110119) __


The message was checked by ESET Smart Security.

http://www.eset.com






--
---
Hope to see you at Megafest
July 16th 2011, Monumet Colorado
www.ppraa.org
---


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] ShuttlePro

[David Walker]

Hi folks,

I am contemplating a shuttlepro for tuning.  I was wondering if there is 
any latency between the device and the tuning of the radio?


Sorry if this has been the muse of countless prior discussions that I 
have missed.


Regards,

Dave

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] ShuttlePro Drivers

[Jim Jerzycke]

Has anybody tried to get the drivers from the Contour
website lately?
I've "registered" 4 times now, and haven't been sent
the link for the driver download.
I registered the product when I bought it, but have
mislaid the drivers disk, and they won't allow access
to the drivers until you get an email reply from them.
73, Jim  KQ6EA


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] ShuttlePro & Keymap.pdf

[Tim Ellison]

Make all software and documentation recommendations using the Feature
Request web page.
http://support.flex-radio.com/BugList.aspx?it=f



-Tim

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison
Sent: Wednesday, October 17, 2007 4:29 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] ShuttlePro & Keymap.pdf

 Hi Tim,

Thanks for your fast answer...

It would be nice if the powers that be could revisit the keymap and
bring it up to the current release of PowerSDR.

Seems like there are a number of vacant slots in the Alts & Ctls, not to
speak for three key combos...

I suppose I could make a recommendation if I knew who to make it to...

Rob
AB7CF


On Wed, 17 Oct 2007 15:12:48 -0400 "Tim Ellison" <[EMAIL PROTECTED]>
writes:
> The version of keymap.pdf on the Downloads Page is the most current.
> 
> -Tim
> 
> 
> 
> -Original Message-
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison
> Sent: Wednesday, October 17, 2007 2:18 PM
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] ShuttlePro & Keymap.pdf
> 
> Hi guys,
> 
> I was trying to program my ShuttlePro this AM.  
> 
> It appears that the Flexradio document keymap.pdf is not fully up to 
> date with PowerSDR v1.10.1 and higher.  For instance MultiRX 
> apparently has no corresponding key stroke listed in the PDF.  
> Likewise CW memories don't seem to have a correlation with CWX. (Might

> it be necessary to be able to switch focus between the main and CWX 
> windows as well as reassignment of
> keys?)
> 
> Perhaps I have just downloaded an old version of Keymap.pdf?  
> Alternatively is there any thought to bring the keystrokes and 
> PowerSDR into sync?
> 
> Would be nice to rarely need to take a hand off the ShuttlePro. 
> 
> Thanks in advance for your help.
> 
> Rob
> AB7CF
> 
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: 
> http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio 
> Homepage: http://www.flex-radio.com/
> 
> 
> 
 

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage:
http://www.flex-radio.com/


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] ShuttlePro & Keymap.pdf

[Rob Dennison]

 Hi Tim,

Thanks for your fast answer...

It would be nice if the powers that be could revisit the keymap and bring
it up to the current release of PowerSDR.

Seems like there are a number of vacant slots in the Alts & Ctls, not to
speak for three key combos...

I suppose I could make a recommendation if I knew who to make it to...

Rob
AB7CF


On Wed, 17 Oct 2007 15:12:48 -0400 "Tim Ellison" <[EMAIL PROTECTED]>
writes:
> The version of keymap.pdf on the Downloads Page is the most current.
> 
> -Tim
> 
> 
> 
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison
> Sent: Wednesday, October 17, 2007 2:18 PM
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] ShuttlePro & Keymap.pdf
> 
> Hi guys,
> 
> I was trying to program my ShuttlePro this AM.  
> 
> It appears that the Flexradio document keymap.pdf is not fully up 
> to
> date
> with PowerSDR v1.10.1 and higher.  For instance MultiRX apparently 
> has
> no
> corresponding key stroke listed in the PDF.  Likewise CW memories 
> don't
> seem to have a correlation with CWX. (Might it be necessary to be 
> able
> to
> switch focus between the main and CWX windows as well as 
> reassignment of
> keys?)
> 
> Perhaps I have just downloaded an old version of Keymap.pdf?  
> Alternatively is there any thought to bring the keystrokes and 
> PowerSDR
> into sync?
> 
> Would be nice to rarely need to take a hand off the ShuttlePro. 
> 
> Thanks in advance for your help.
> 
> Rob
> AB7CF
> 
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: 
> http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/
> FlexRadio Homepage: http://www.flex-radio.com/
> 
> 
> 
 

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] ShuttlePro & Keymap.pdf

[Tim Ellison]

The version of keymap.pdf on the Downloads Page is the most current.

-Tim



-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison
Sent: Wednesday, October 17, 2007 2:18 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] ShuttlePro & Keymap.pdf

Hi guys,

I was trying to program my ShuttlePro this AM.  

It appears that the Flexradio document keymap.pdf is not fully up to
date
with PowerSDR v1.10.1 and higher.  For instance MultiRX apparently has
no
corresponding key stroke listed in the PDF.  Likewise CW memories don't
seem to have a correlation with CWX. (Might it be necessary to be able
to
switch focus between the main and CWX windows as well as reassignment of
keys?)

Perhaps I have just downloaded an old version of Keymap.pdf?  
Alternatively is there any thought to bring the keystrokes and PowerSDR
into sync?

Would be nice to rarely need to take a hand off the ShuttlePro. 

Thanks in advance for your help.

Rob
AB7CF

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] ShuttlePro & Keymap.pdf

[Rob Dennison]

Hi guys,

I was trying to program my ShuttlePro this AM.  

It appears that the Flexradio document keymap.pdf is not fully up to date
with PowerSDR v1.10.1 and higher.  For instance MultiRX apparently has no
corresponding key stroke listed in the PDF.  Likewise CW memories don't
seem to have a correlation with CWX. (Might it be necessary to be able to
switch focus between the main and CWX windows as well as reassignment of
keys?)

Perhaps I have just downloaded an old version of Keymap.pdf?  
Alternatively is there any thought to bring the keystrokes and PowerSDR
into sync?

Would be nice to rarely need to take a hand off the ShuttlePro. 

Thanks in advance for your help.

Rob
AB7CF

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] ShuttlePro, PowerMate. or neither?

[Guy Atkins]

I think the PowerMate knob works--and looks--great when mounted right on the
front of the SDR-1000. At the bottom of this blog entry is a photo and
comments of how I routed the cabling:
http://sdr-1000.blogspot.com/2006_07_02_archive.html

I used the ShuttlePro ver. 2.0 for a while, and even had custom button
labels printed for use under the clear keycaps. It just wasn't my style,
though. My use of the radio is split 50/50 between mouse and Griffin
PowerMate knob.

Guy Atkins KE7MAV
Puyallup, WA



-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Sunday, April 29, 2007 7:43 PM
To: Alan NV8A; Flex Group
Subject: Re: [Flexradio] ShuttlePro, PowerMate. or neither?


I have the Griffin PowerMate.  I use it rarely.  I find that using a mouse
for me is the easiest.  I do understand that a lot of people like the
ShuttlePro because of its ability to program the buttons and the center
"joystick". 

I keep the PowerMate on my desk because the blue LED bottom looks cool and
it blends in well with my radios (I bought a black one rather than silver).


-Tim, W4TME


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan NV8A
Sent: Sunday, April 29, 2007 10:33 PM
To: Flex Group
Subject: [Flexradio] ShuttlePro, PowerMate. or neither?

Which, if any, of the suggested accessories that are alleged to make control
of an SDR easier have people used? What did you like or not like about
either. Are ther eothers that are better still?

73

Alan NV8A


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Re: [Flexradio] ShuttlePro, PowerMate. or neither?

[Tim Ellison]

I have the Griffin PowerMate.  I use it rarely.  I find that using a
mouse for me is the easiest.  I do understand that a lot of people like
the ShuttlePro because of its ability to program the buttons and the
center "joystick". 

I keep the PowerMate on my desk because the blue LED bottom looks cool
and it blends in well with my radios (I bought a black one rather than
silver).


-Tim, W4TME


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan NV8A
Sent: Sunday, April 29, 2007 10:33 PM
To: Flex Group
Subject: [Flexradio] ShuttlePro, PowerMate. or neither?

Which, if any, of the suggested accessories that are alleged to make
control of an SDR easier have people used? What did you like or not like
about either. Are ther eothers that are better still?

73

Alan NV8A

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage:
http://www.flex-radio.com/


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] ShuttlePro, PowerMate. or neither?

[Alan NV8A]

Which, if any, of the suggested accessories that are alleged to make 
control of an SDR easier have people used? What did you like or not like 
about either. Are ther eothers that are better still?

73

Alan NV8A

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

[Flexradio] ShuttlePro FOR SALE

[John P Basilotto W5GI]

I have an extra ShuttlePro which I used once. $69 shipped.

 

John P. Basilotto
W5GI
Marketing and Product Manager
FlexRadio Systems
512-535-5266

 

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070329/f70280bb/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] ShuttlePro - never mind... Operator Error.

[Mark Amos]

Please disregard my previous post - I had Keyboard enable shortcuts turned off 
for some reason... Sorry for the abuse of bandwidth.
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070305/e01992c4/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

[Flexradio] ShuttlePro

[Mark Amos]

All,

I haven't used the ShuttlePro for a week or so (it worked when I demo'd the rig 
two weeks ago, but I haven't used it since.) It appears to have stopped talking 
to PowerSDR. Anyone else notice it disappear or have any ideas where to look?

ShuttlePro device configuration works fine, the buttons light up, etc. I've 
pointed it at the correct PowerSDR.exe (I'm using Alpha v1.9.0 SVN: 917.)

Is there a setting in the PowerSDR setup that I might have turned off that 
would disable the ShuttlePro?

Mark

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070305/a5717f03/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] Shuttlepro and SVN 563

[Eric Wachsmann]

This may have to do with which .exe you associate the profile.  I would hope
that it would just respond to any PowerSDR.exe process that runs, but it may
be more specific than that requiring you to reassociate it when you run a
console out of a different directory.


Eric Wachsmann
FlexRadio Systems

> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of [EMAIL PROTECTED]
> Sent: Thursday, August 24, 2006 10:28 PM
> To: FlexRadio@flex-radio.biz
> Subject: [Flexradio] Shuttlepro and SVN 563
> 
> Well, I apologize for the bandwidth.
> I don't know why, but when I upgraded to SVN 563 for some reason it messed
> up the shuttlepro.
> Did not happen when I had upgraded to SVN 562.
> I reprogrammed it and all is well now.
> Strange, but then agn, that is an often occurrance with me ... hihi.
> 73/Crit/K4BXN


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] Shuttlepro and SVN 563

[jcharley]

Well, I apologize for the bandwidth.
I don't know why, but when I upgraded to SVN 563 for some reason it messed up 
the shuttlepro.
Did not happen when I had upgraded to SVN 562.
I reprogrammed it and all is well now.
Strange, but then agn, that is an often occurrance with me ... hihi.
73/Crit/K4BXN


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] Shuttlepro and SVN 653

[jcharley]

My shuttlepro which worked perfectly w/ 1.6.2 and SVN 652 does not work as it 
did w/ the latest SVN 653.
Anybody else notice this?
73/Crit/K4BXN


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] ShuttlePro

[Eric Wachsmann - FlexRadio]

That's what I did.  My mailer (Outlook) must break it.


Eric Wachsmann
FlexRadio Systems

> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of KD5NWA
> Sent: Friday, February 17, 2006 1:47 PM
> To: Flex Radio
> Subject: Re: [Flexradio] ShuttlePro
> 
> <
> http://www.flex-
>
radio.com/download_files/PowerSDR/Docs/Contour_Design_ShuttleProv2_Suppo
rt
> .pdf
>  >
> 
> Bracket space space bracket, then you paste the link inside the two
> spaces.
> 
> Computers are evil!
> 
> 
> 
> At 01:26 PM 2/17/2006, Eric Wachsmann - FlexRadio wrote:
> >George,
> >
> >Our download page has both a default preferences file that can be
> >imported along with instructions on how to setup the ShuttlePro.  See
> >the links below:
> >
> >www.flex-radio.com/downloads.htm
> ><
>
>http://www.flex-radio.com/download_files/PowerSDR/Docs/Contour_Design_S
h
> >uttleProv2_Support.pdf >
> >
> >
> >Eric Wachsmann
> >FlexRadio Systems
> >
> >
> > > -Original Message-
> > > From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
> > > radio.biz] On Behalf Of George Bennett
> > > Sent: Friday, February 17, 2006 1:15 PM
> > > To: FlexRadio@flex-radio.biz
> > > Subject: [Flexradio] ShuttlePro
> > >
> > > I have just received my new SDR-1000 with the PreSonus Firebox and
> > > ShuttlePro 2.
> > >
> > > Has anyone suggested a setup for the ShuttlePro?  I haven't found
> >anything
> > > concerning the use of this with the SDR-1000 other than the
> >manufacturer's
> > > recommendation.  I hate to reinvent the wheel if a set of
instructions
> > > already exists.
> > >
> > > Thanks for any help anyone can offer.
> > >
> > > George Bennett
> > > ___
> > > FlexRadio mailing list
> > > FlexRadio@flex-radio.biz
> > >
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > > Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-
> > > radio.biz/
> > > FlexRadio Homepage: http://www.flex-radio.com
> >
> >
> >___
> >FlexRadio mailing list
> >FlexRadio@flex-radio.biz
> >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> >Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-
> radio.biz/
> >FlexRadio Homepage: http://www.flex-radio.com
> 
> 
> Cecil Bayona
> KD5NWA
> www.qrpradio.com
> 
> I fail to see why doing the same thing over and over and getting the
> same results every time is insanity: I've almost proved it isn't;
> only a few more tests now and I'm sure results will differ this time
...
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-
> radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] ShuttlePro

[KD5NWA]

< 
http://www.flex-radio.com/download_files/PowerSDR/Docs/Contour_Design_ShuttleProv2_Support.pdf  
>


Bracket space space bracket, then you paste the link inside the two spaces.

Computers are evil!



At 01:26 PM 2/17/2006, Eric Wachsmann - FlexRadio wrote:

George,

Our download page has both a default preferences file that can be
imported along with instructions on how to setup the ShuttlePro.  See
the links below:

www.flex-radio.com/downloads.htm
<
http://www.flex-radio.com/download_files/PowerSDR/Docs/Contour_Design_Sh
uttleProv2_Support.pdf >


Eric Wachsmann
FlexRadio Systems


> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of George Bennett
> Sent: Friday, February 17, 2006 1:15 PM
> To: FlexRadio@flex-radio.biz
> Subject: [Flexradio] ShuttlePro
>
> I have just received my new SDR-1000 with the PreSonus Firebox and
> ShuttlePro 2.
>
> Has anyone suggested a setup for the ShuttlePro?  I haven't found
anything
> concerning the use of this with the SDR-1000 other than the
manufacturer's
> recommendation.  I hate to reinvent the wheel if a set of instructions
> already exists.
>
> Thanks for any help anyone can offer.
>
> George Bennett
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-
> radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com



Cecil Bayona
KD5NWA
www.qrpradio.com

I fail to see why doing the same thing over and over and getting the 
same results every time is insanity: I've almost proved it isn't; 
only a few more tests now and I'm sure results will differ this time ...  
From [EMAIL PROTECTED] Fri Feb 17 14:19:17 2006

Received: from mx252g.mysite4now.com ([209.132.244.252])
by www3.qth.com with esmtp (Exim 4.52) id 1FAC4T-0001Gi-0F
for flexradio@flex-radio.biz; Fri, 17 Feb 2006 14:19:17 -0600
MIME-Version: 1.0
Date: Fri, 17 Feb 2006 12:19:26 -0800
From: Paul Shaffer <[EMAIL PROTECTED]>
To: 
CC: 
Message-ID: <[EMAIL PROTECTED]>

Content-Type: text/plain;
charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
X-Content-Filtered-By: Mailman/MimeDel 2.1.6
Subject: Re: [Flexradio] Building PowerSDR with VS2005
X-BeenThere: FlexRadio@flex-radio.biz
X-Mailman-Version: 2.1.6
Precedence: list
Reply-To: [EMAIL PROTECTED]
List-Id: Flex Radio Users 
List-Unsubscribe: 
<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>,
<mailto:[EMAIL PROTECTED]>
List-Archive: <http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz>
List-Post: <mailto:FlexRadio@flex-radio.biz>
List-Help: <mailto:[EMAIL PROTECTED]>
List-Subscribe: 
<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>,
<mailto:[EMAIL PROTECTED]>
X-List-Received-Date: Fri, 17 Feb 2006 20:19:17 -

For what it's worth,  the cross-threading errors don't show up=0D=0Ain a vs=
2005 Release build. PowerSDR runs really well (still no hardware). =0D=0A=
=0D=0AI also converted the serial port code to use the System.IO.Ports.Seri=
alPort =0D=0Aclass. Seemed very easy but not tested with actual cat program=
.=0D=0A=0D=0A-Original Message-=0D=0AFrom: [EMAIL PROTECTED]
adio.biz=0D=0A[mailto:[EMAIL PROTECTED] On Behalf Of Paul S=
haffer=0D=0ASent: Tuesday, February 14, 2006 6:17 PM=0D=0ATo: [EMAIL PROTECTED]
x-radio.biz=0D=0ASubject: Re: [Flexradio] Building PowerSDR with VS2005=0D=
=0A=0D=0AI spent a few more hours trying to get the VS2005 build of PowerSD=
R to work.=0D=0A=0D=0AI had to disable the LoaderLock exception in the Debu=
g/Exceptions menu to=0D=0Aget past that problem. The core issue here needs =
to be tracked down and=0D=0Afixed.=0D=0A=0D=0AVS2005 uncovers several cross=
-threading issues that don't show up in VS2003.=0D=0AThe TS controls "get" =
accessors don't work with the setup form for example.=0D=0AThe more I run t=
he program the more new errors I see. To make any real=0D=0Aprogress, I thi=
nk a lot of stuff has to be rewritten. Model classes have to=0D=0Abe writte=
n from scratch, and all model related code taken out of the forms.=0D=0AI c=
ould fix the setup form in a few days, but wouldn't want to do it without=
=0D=0Aa complete set of models in place. So, at this point, I'm stuck and c=
an't=0D=0Acontinue. The flexradio programmers are doing a major revision so=
perhaps I=0D=0Awill try my lu

Re: [Flexradio] ShuttlePro

[Eric Wachsmann - FlexRadio]

George,

Our download page has both a default preferences file that can be
imported along with instructions on how to setup the ShuttlePro.  See
the links below:

www.flex-radio.com/downloads.htm
<
http://www.flex-radio.com/download_files/PowerSDR/Docs/Contour_Design_Sh
uttleProv2_Support.pdf >


Eric Wachsmann
FlexRadio Systems


> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of George Bennett
> Sent: Friday, February 17, 2006 1:15 PM
> To: FlexRadio@flex-radio.biz
> Subject: [Flexradio] ShuttlePro
> 
> I have just received my new SDR-1000 with the PreSonus Firebox and
> ShuttlePro 2.
> 
> Has anyone suggested a setup for the ShuttlePro?  I haven't found
anything
> concerning the use of this with the SDR-1000 other than the
manufacturer's
> recommendation.  I hate to reinvent the wheel if a set of instructions
> already exists.
> 
> Thanks for any help anyone can offer.
> 
> George Bennett
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-
> radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com

[Flexradio] ShuttlePro

[George Bennett]

I have just received my new SDR-1000 with the PreSonus Firebox and ShuttlePro 2.

Has anyone suggested a setup for the ShuttlePro?  I haven't found anything 
concerning the use of this with the SDR-1000 other than the manufacturer's 
recommendation.  I hate to reinvent the wheel if a set of instructions already 
exists.

Thanks for any help anyone can offer.

George Bennett
From [EMAIL PROTECTED] Fri Feb 17 13:22:32 2006
Received: from pm1.mailnet.ptd.net ([204.186.29.100])
by www3.qth.com with esmtp (Exim 4.52) id 1FABBX-0004vX-On
for FlexRadio@flex-radio.biz; Fri, 17 Feb 2006 13:22:32 -0600
Received: (qmail 19626 invoked by uid 50005); 17 Feb 2006 19:22:23 -
Received: from 24.115.34.145 by pm1.mailnet.ptd.net (envelope-from
<[EMAIL PROTECTED]>, uid 50002) with qmail-scanner-1.23
(uvscan: v4.4.00/v4647.  Clear:RC:0(24.115.34.145):.
Processed in 0.023922 secs); 17 Feb 2006 19:22:23 -
Received: from 24.115.34.145.res-cmts.brd.ptd.net (HELO [192.168.1.100])
(authenticated:[EMAIL PROTECTED])
(envelope-sender <[EMAIL PROTECTED]>)
by pm1.mailnet.ptd.net (qmail-ldap-1.03) with SMTP
for ; 17 Feb 2006 19:22:23 -
From: "Bill Nagle" <[EMAIL PROTECTED]>
To: FlexRadio@flex-radio.biz
Date: Fri, 17 Feb 2006 14:22:24 -0500
MIME-Version: 1.0
Message-ID: <[EMAIL PROTECTED]>
Priority: normal
X-mailer: Pegasus Mail for Windows (4.31)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Content-description: Mail message body
Subject: [Flexradio] AUDIO PHASE EVERSAL
X-BeenThere: FlexRadio@flex-radio.biz
X-Mailman-Version: 2.1.6
Precedence: list
List-Id: Flex Radio Users 
List-Unsubscribe: 
,

List-Archive: 
List-Post: 
List-Help: 
List-Subscribe: 
,

X-List-Received-Date: Fri, 17 Feb 2006 19:22:32 -

A very useful feature for us avid am'ers would be a way to reverse the audio
phase 180 degrees somewhere before it gets to the modulator.
I tried checking the delta 44 in3 and in4 boxes for phase reversal but it made
no difference.

The difference in modulation positive versus negative going audio is dramatic
when using a good mike and audio chain, especially with the excellent low
end available with the sdr1000.


Bill Nagle
[EMAIL PROTECTED]

[Flexradio] ShuttlePro Preferences

[Eric]

In an attempt to flesh out the default ShuttlePro settings that are
offered on our website, I have modified W5ZLs original template to
toggle a few more of the options (some only available in v1.4.5 and
forward).

Attached is a picture of the layout.  I would like suggestions on how to
improve this default setup, as well as suggestions on other templates.
There is no reason that we cannot come up with some good templates for
CW, ESSB, AM, SWL, etc.  Let me know what you think.


Eric Wachsmann
FlexRadio Systems
<>

Re: [Flexradio] ShuttlePro Command Hooks

[FlexRadio - Eric]

In an effort to collect ideas on this subject in one place and keep an 
active list, a forum topic has been posted at the following url: 
http://www.flex-radio.com/forum/viewtopic.php?p=7855#7855.


Please post additions to this list along with comments there. Thanks.

Eric


Gary Schmidt W5ZL wrote:

When I started out to program the first ShuttlePro controller to work 
with my SDR there were only a few keystroke commands already visible 
in the console keyboard setup tab, so all I was able to program in was 
VFO functionality and AF Gain up and down. Eric has already started 
adding in others (RIT/XIT, band change, mode change, etc.).


Now we need to compile a comprehensive list of potentially desirable 
functions that could be programmed into an outboard controller. Here’s 
mine. Please add your ideas and we’ll get this going.


Thanks,

Gary W5ZL

* RIT Zero
* CW keying speed up and down
* Play CW memory 1, 2, etc.
* Play digital voice keyer memory 1, 2, etc.
* Select transmit audio EQ setting 1, 2, etc. (when application is
  expanded to allow for multiple saved audio personalities)
* AGC mode up/down
* Quick Save, Quick Recall
* Variable audio filter wider, narrower
* Toggle Split on/off
* Toggle Dual Watch on/off (only active when Split active)
* Toggle VFOs A/B
* IF shift left/right
* IF Shift zero (centered)



___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
 

Re: [Flexradio] ShuttlePro Command Hooks

[Terry - W0VB]

After sending my first thoughts. I thought, 
wait there's settings on the console that might be useful to bring out for 
user control:
 
 
 
Let's add these controls to be "externally 
available"

  NB on/off
  NB2 on/off
  NR on/off
  ANF on/off
  Display mode forward/backward, or individually 
  selectable, or toggle between two defined selections
  Preamp up/down
  power level up/down
  Bin on/off
  Mute on/off
  Mox on/off
 
 

  - Original Message - 
  From: 
  Terry - 
  W0VB 
  To: 'FlexRadio Mailing List' 
  Sent: Wednesday, May 25, 2005 12:17 
  PM
  Subject: Re: [Flexradio] ShuttlePro 
  Command Hooks
  
  Great start Gary.
   
  I'd add:
   
  
Band change -  up/down 
filter select-  
up/down 
mode select  -  
left/right
   
  Terry, W0VB
  
- Original Message - 
From: 
Gary Schmidt 
W5ZL 
To: 'FlexRadio Mailing List' 
Sent: Wednesday, May 25, 2005 12:03 
PM
Subject: [Flexradio] ShuttlePro Command 
Hooks


When I 
started out to program the first ShuttlePro controller to work with my SDR 
there were only a few keystroke commands already visible in the console 
keyboard setup tab, so all I was able to program in was VFO functionality 
and AF Gain up and down. Eric has already started adding in others (RIT/XIT, 
band change, mode change, etc.).
 
Now we 
need to compile a comprehensive list of potentially desirable functions that 
could be programmed into an outboard controller. Here’s mine. Please add 
your ideas and we’ll get this going.
 
Thanks,
 
Gary 
W5ZL
 

  RIT Zero 
  CW keying speed up and down 
  Play CW memory 1, 2, etc. 
  Play digital voice keyer memory 1, 2, 
  etc. 
  Select transmit audio EQ setting 1, 2, etc. (when 
  application is expanded to allow for multiple saved audio 
  personalities) 
  AGC mode up/down 
  Quick Save, Quick Recall 
  Variable audio filter wider, 
  narrower 
  Toggle Split on/off 
  Toggle Dual Watch on/off (only active when Split 
  active) 
  Toggle VFOs A/B 
  IF shift left/right 
  IF Shift zero (centered) 




___FlexRadio mailing 
listFlexRadio@flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  
  

  ___FlexRadio mailing 
  listFlexRadio@flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

Re: [Flexradio] ShuttlePro Command Hooks

[FlexRadio - Eric]

Thanks for starting this up Gary. Once the list has been compiled, it 
would be great if the entire list of default keys could be added in an 
excel table. This will make my job as easy as pie. I haven't looked 
closely at the ShuttlePro software, but I'm assuming that you can add 
Ctrl, Alt, Shift, or a combination of those keys with others. Keep that 
in mind when deciding on default shortcuts.


Eric


Gary Schmidt W5ZL wrote:

When I started out to program the first ShuttlePro controller to work 
with my SDR there were only a few keystroke commands already visible 
in the console keyboard setup tab, so all I was able to program in was 
VFO functionality and AF Gain up and down. Eric has already started 
adding in others (RIT/XIT, band change, mode change, etc.).


Now we need to compile a comprehensive list of potentially desirable 
functions that could be programmed into an outboard controller. Here’s 
mine. Please add your ideas and we’ll get this going.


Thanks,

Gary W5ZL

* RIT Zero
* CW keying speed up and down
* Play CW memory 1, 2, etc.
* Play digital voice keyer memory 1, 2, etc.
* Select transmit audio EQ setting 1, 2, etc. (when application is
  expanded to allow for multiple saved audio personalities)
* AGC mode up/down
* Quick Save, Quick Recall
* Variable audio filter wider, narrower
* Toggle Split on/off
* Toggle Dual Watch on/off (only active when Split active)
* Toggle VFOs A/B
* IF shift left/right
* IF Shift zero (centered)



___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
 

Re: [Flexradio] ShuttlePro Command Hooks

[Terry - W0VB]

Great start Gary.
 
I'd add:
 

  Band change -  up/down
  filter select-  
  up/down
  mode select  -  
  left/right
 
Terry, W0VB

  - Original Message - 
  From: 
  Gary Schmidt 
  W5ZL 
  To: 'FlexRadio Mailing List' 
  Sent: Wednesday, May 25, 2005 12:03 
  PM
  Subject: [Flexradio] ShuttlePro Command 
  Hooks
  
  
  When I 
  started out to program the first ShuttlePro controller to work with my SDR 
  there were only a few keystroke commands already visible in the console 
  keyboard setup tab, so all I was able to program in was VFO functionality and 
  AF Gain up and down. Eric has already started adding in others (RIT/XIT, band 
  change, mode change, etc.).
   
  Now we 
  need to compile a comprehensive list of potentially desirable functions that 
  could be programmed into an outboard controller. Here’s mine. Please add your 
  ideas and we’ll get this going.
   
  Thanks,
   
  Gary 
  W5ZL
   
  
RIT Zero 
CW keying speed up and down 
Play CW memory 1, 2, etc. 
Play digital voice keyer memory 1, 2, 
etc. 
Select transmit audio EQ setting 1, 2, etc. (when 
application is expanded to allow for multiple saved audio 
personalities) 
AGC mode up/down 
Quick Save, Quick Recall 
Variable audio filter wider, narrower 
Toggle Split on/off 
Toggle Dual Watch on/off (only active when Split 
active) 
Toggle VFOs A/B 
IF shift left/right 
IF Shift zero (centered) 

  
  

  ___FlexRadio mailing 
  listFlexRadio@flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

[Flexradio] ShuttlePro Command Hooks

[Gary Schmidt W5ZL]

When I started
out to program the first ShuttlePro controller to work with my SDR there were
only a few keystroke commands already visible in the console keyboard setup
tab, so all I was able to program in was VFO functionality and AF Gain up and
down. Eric has already started adding in others (RIT/XIT, band change, mode
change, etc.).

 

Now we need
to compile a comprehensive list of potentially desirable functions that could
be programmed into an outboard controller. Here’s mine. Please add your
ideas and we’ll get this going.

 

Thanks,

 

Gary W5ZL

 


 RIT Zero
 CW keying speed up and down
 Play CW memory 1, 2, etc.
 Play digital voice keyer memory 1, 2, etc.
 Select transmit audio EQ setting 1, 2, etc. (when
 application is expanded to allow for multiple saved audio personalities)
 AGC mode up/down
 Quick Save, Quick Recall
 Variable audio filter wider, narrower
 Toggle Split on/off
 Toggle Dual Watch on/off (only active when Split
 active)
 Toggle VFOs A/B
 IF shift left/right
 IF Shift zero (centered) 

[Flexradio] ShuttlePro Discoveries

[Gary Schmidt W5ZL]

With Dayton
behind me I took a few minutes on the airplane to play with my ShuttlePro and
found some very interesting features I hadn’t expected. While reading the
ShuttlePro manual pdf I downloaded from the Contour Design website (http://contourdesign.com/shuttlepro/shuttle_downloads.htm#win
will get you close) I discovered that rotating the SP’s spring-loaded outer
knob right or left scrolled the pdf page up/down, and the
“southeast” key pair zoomed the page in/out. I made a slight mod to
the Acrobat reader settings in the SP setup which also let me scroll using the
jog (dimpled) dial which I like even better. Similarly, as I was typing this
message in Outlook I found navigational functions already imbedded in the SP
settings. Same with PowerPoint. 

 

I was also
trying to figure out how to multi-purpose certain controls or buttons on the SP
controller and there’s a way to do that as well. A little hard to
describe here, but it’s in the manual and very easy to set up. I’ll
be glad to share it with anyone who can’t find it, but look for the instructions
on “Switch Settings”, I think, in their pdf. Pretty funky little
invention this ShuttlePro!

 

Dayton was
exhausting and fun. Thanks in no small part to the infectious enthusiasm and
passion of all you guys in the FlexRadio community, the SDR train has
definitely left the station.

 

73,

 

Gary W5ZL