Re: [Flexradio] No transmit audio on PSDR 2.0.22

[FlexRadio Support, Dudley Hurry]

Matt,

As Neil said,  be sure to check the Mixer menu and that the Mic is checked..
 Then move the TX meter to Mic,   this will be the first mic audio stage,
 and increase you Mic Gain,  most Mic will need at least 20 on the mic
gain..

As some else said, if you are using a computer type of mic,  most do need a
bias to work,  there is one Knowledge Center article that gives a circuit
that might help..

http://kc.flexradio.com/KnowledgebaseArticle50464.aspx




73,
Dudley

WA5QPZ
FlexRadio Systems

(512) 250-8595, Option 2
Email: dud...@flexradio.com 
Web: www.flexradio.com 


https://www.crossloop.com/FlexRadioSupport?type=email";
target="_blank">https://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from
Dudley (WA5QPZ) Hurry!"/>



On Sun, Jul 3, 2011 at 2:51 PM,  wrote:

> Hi,
>
> I haven't used my F3K for anything other than digital modes for a long
> time. Voice used to work fine with the same equipment I am using now,
> but no luck.
>
> With the radio on dummy load, I downloaded PSDR 2.0.22, did the
> factory defaults reset, went to the voice band of 20 meters, chose
> USB, and set the TX meter to ALC. With a headset mic plugged in to the
> front panel connector, ALC does not move however I whistle into the
> mic.
>
> To make sure the mic is working properly, I plugged it into my windows
> machine, recorded a short bit of audio and played it back. No problem.
>
> The wiring of the mic connector is still fine, I checked it end-to-end
> and ring/tip are properly wired. It has worked well in the past, and I
> had no real reason to mistrust it but I checked anyhow.
>
> I could make things work by feeding PSDR the audio from VAC, this
> approach is fine, but it has the drawback of making it impossible to
> use pre-recorded audio from N1MM and the mic at the same time. (as far
> as I know... it appears that only one application at a time can use
> either end of a VAC)
>
> Any suggestions or ideas for troubleshooting this further would be
> appreciated.
>
> 73,
> Matt
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] No transmit audio on PSDR 2.0.22

[Neal Campbell]

Go to the Mixer menu and make sure you have enabled the front Mic for input.
That gets me every time!

73
Neal

On Sun, Jul 3, 2011 at 3:51 PM,  wrote:

> Hi,
>
> I haven't used my F3K for anything other than digital modes for a long
> time. Voice used to work fine with the same equipment I am using now,
> but no luck.
>
> With the radio on dummy load, I downloaded PSDR 2.0.22, did the
> factory defaults reset, went to the voice band of 20 meters, chose
> USB, and set the TX meter to ALC. With a headset mic plugged in to the
> front panel connector, ALC does not move however I whistle into the
> mic.
>
> To make sure the mic is working properly, I plugged it into my windows
> machine, recorded a short bit of audio and played it back. No problem.
>
> The wiring of the mic connector is still fine, I checked it end-to-end
> and ring/tip are properly wired. It has worked well in the past, and I
> had no real reason to mistrust it but I checked anyhow.
>
> I could make things work by feeding PSDR the audio from VAC, this
> approach is fine, but it has the drawback of making it impossible to
> use pre-recorded audio from N1MM and the mic at the same time. (as far
> as I know... it appears that only one application at a time can use
> either end of a VAC)
>
> Any suggestions or ideas for troubleshooting this further would be
> appreciated.
>
> 73,
> Matt
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>



-- 
Abroham Neal Software
www.abrohamnealsoftware.com
Work:(540) 645 5394
Mobile:(540) 645 8171
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] No transmit audio on PSDR 2.0.22

[Mike WA8BXN]

 

Many computer microphones are electret, and around 5 volts is provided by
the sound card in a computer for them. Here is one more or less random
reference I found with Google: 

http://www.hobby-hour.com/electronics/computer_microphone.php 

 

I wonder if you need this voltage with the headset you are trying to use now
 and that in the past what worked may have been a dynamic mic that doesn't
need power. 

 

73 - Mike WA8BXN 

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] No transmit audio on PSDR 2.0.22

[Matt Steven AI1P]

Yes Mike, it's a custom wiring job, but it has always worked in the 
past. Tip is wired to mic+ and ring to mic-.


Some high end microphones do need a 48v bias voltage, but I don't think 
a computer headset mic needs it. At least it never used to on mine.


I wonder if some RF got into the audio circuitry in the flex and cooked 
something? I have ferrites on every last thing that enters the Flex's 
chassis, but you never know.



On 07/03/2011 03:24 PM, Mike WA8BXN wrote:

I am somewhat confused! My PC doesn't have a mic connector that matches the
mic connector on my Flex 3000. You may be using a computer mic with an
adapter. I think most computer mic's need a bias voltage for power, check to
see if you are getting that on your adapter from the 3K. If that mic setup
did work in the past, I would look at all the options where you specify
where the audio input will be coming from.

73 - Mike WA8BXN




---Original Message---

From: kd0...@gmail.com
Date: 07/03/11 15:51:38
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] No transmit audio on PSDR 2.0.22

Hi,

I haven't used my F3K for anything other than digital modes for a long
Time. Voice used to work fine with the same equipment I am using now,
But no luck.

With the radio on dummy load, I downloaded PSDR 2.0.22, did the
Factory defaults reset, went to the voice band of 20 meters, chose
USB, and set the TX meter to ALC. With a headset mic plugged in to the
Front panel connector, ALC does not move however I whistle into the
Mic.

To make sure the mic is working properly, I plugged it into my windows
Machine, recorded a short bit of audio and played it back. No problem.

The wiring of the mic connector is still fine, I checked it end-to-end
And ring/tip are properly wired. It has worked well in the past, and I
Had no real reason to mistrust it but I checked anyhow.

I could make things work by feeding PSDR the audio from VAC, this
Approach is fine, but it has the drawback of making it impossible to
Use pre-recorded audio from N1MM and the mic at the same time. (as far
As I know... It appears that only one application at a time can use
Either end of a VAC)

Any suggestions or ideas for troubleshooting this further would be
appreciated.

73,
Matt





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] No transmit audio on PSDR 2.0.22

[Matt Steven AI1P]

Hi Larry,

Yes, that is the factory default setting, and it is enabled and turned 
up fully.


Thanks,
Matt

On 07/03/2011 03:00 PM, Larry Goga wrote:

Hi Matt,

Did you check the audio mixer panel in the main menu bar?  Is the 
microphone connector on the front panel enabled and the level set 
appropriately?


Larry, AE5CZ

On Jul 3, 2011, at 1:51 PM, kd0...@gmail.com wrote:


Hi,

I haven't used my F3K for anything other than digital modes for a long
time. Voice used to work fine with the same equipment I am using now,
but no luck.

With the radio on dummy load, I downloaded PSDR 2.0.22, did the
factory defaults reset, went to the voice band of 20 meters, chose
USB, and set the TX meter to ALC. With a headset mic plugged in to the
front panel connector, ALC does not move however I whistle into the
mic.

To make sure the mic is working properly, I plugged it into my windows
machine, recorded a short bit of audio and played it back. No problem.

The wiring of the mic connector is still fine, I checked it end-to-end
and ring/tip are properly wired. It has worked well in the past, and I
had no real reason to mistrust it but I checked anyhow.

I could make things work by feeding PSDR the audio from VAC, this
approach is fine, but it has the drawback of making it impossible to
use pre-recorded audio from N1MM and the mic at the same time. (as far
as I know... it appears that only one application at a time can use
either end of a VAC)

Any suggestions or ideas for troubleshooting this further would be 
appreciated.


73,
Matt

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/







___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] No transmit audio on PSDR 2.0.22

[Mike WA8BXN]

I am somewhat confused! My PC doesn't have a mic connector that matches the
mic connector on my Flex 3000. You may be using a computer mic with an
adapter. I think most computer mic's need a bias voltage for power, check to
see if you are getting that on your adapter from the 3K. If that mic setup
did work in the past, I would look at all the options where you specify
where the audio input will be coming from. 

 

73 - Mike WA8BXN 

 

 

 

 

---Original Message--- 

 

From: kd0...@gmail.com 

Date: 07/03/11 15:51:38 

To: FlexRadio@flex-radio.biz 

Subject: [Flexradio] No transmit audio on PSDR 2.0.22 

 

Hi, 

 

I haven't used my F3K for anything other than digital modes for a long 

Time. Voice used to work fine with the same equipment I am using now, 

But no luck. 

 

With the radio on dummy load, I downloaded PSDR 2.0.22, did the 

Factory defaults reset, went to the voice band of 20 meters, chose 

USB, and set the TX meter to ALC. With a headset mic plugged in to the 

Front panel connector, ALC does not move however I whistle into the 

Mic. 

 

To make sure the mic is working properly, I plugged it into my windows 

Machine, recorded a short bit of audio and played it back. No problem. 

 

The wiring of the mic connector is still fine, I checked it end-to-end 

And ring/tip are properly wired. It has worked well in the past, and I 

Had no real reason to mistrust it but I checked anyhow. 

 

I could make things work by feeding PSDR the audio from VAC, this 

Approach is fine, but it has the drawback of making it impossible to 

Use pre-recorded audio from N1MM and the mic at the same time. (as far 

As I know... It appears that only one application at a time can use 

Either end of a VAC) 

 

Any suggestions or ideas for troubleshooting this further would be
appreciated. 

 

73, 

Matt 

 

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] NO transmit

[Richard Clafton]

So funny.  I recall sitting here on day one trying to work out why the Yaesu 
Mic I had plugged in had no audio, but would key the
PTT.   It was the same issue you just had.  

 

We've all been there.

 

Regards

 

Richard W5/G7EIX

 

From: adam grossmyer [mailto:agg...@gmail.com] 
Sent: Sunday, May 16, 2010 11:26 PM
To: Richard Clafton
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] NO transmit

 

Well after checking every setting I could think of, I found the problem.   Some 
how the mic input got unchecked and the flexwire
input got checked, all seems to be fine now,  yeah yeah i'm a knuckle head.

Thanks and 73

Adam

N8MOX

On Mon, May 17, 2010 at 12:19 AM, adam grossmyer  wrote:

I have had to reset the database once already to fix a problem with the 
panadapter.  I then had to reapply all the settings, the
only reason why I didn't do that again was I didn't know I could back up the 
database ( new kid on the block)let me see if I can
find where to back it up and try that. Thanks Rich

Adam

N8MOX

On Mon, May 17, 2010 at 12:14 AM, Richard Clafton  wrote:

Have you tried backing up and then resetting the database?

Richard
W5/G7EIX


-Original Message-
From: flexradio-boun...@flex-radio.biz 
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer
Sent: Sunday, May 16, 2010 11:08 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] NO transmit

Well I tried everything I could think of and rechecked all the settings
still no transmit on ssb only have power out on CW.
Adam
N8MOX

On Sun, May 16, 2010 at 8:24 PM, adam grossmyer  wrote:

> Hey all, the strangest thing just happened to me.  I was working some cw
> contest stations through out the day today,  I left the 3000 on all day, I
> switched to ssb and much to my surprise I went to key up and I get no power
> output what so ever.  I shut the radio down and restarted PSdr and still
> nothing.  I switched back over to cw and again full power output.  I am new
> to the 3000 by just a few days and not sure if I am missing something or
> not.  Any Ideas.
> 73
> Adam
> N8MOX
>

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/



 

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] NO transmit

[Richard Clafton]

There is a tool available to backup and restore sections from the DB.  

 

http://k9dur.rnaconsultingservices.com/SDRDataTransfer.aspx

 

You can use this to backup and restore your settings when you do a database 
reset.

 

Pretty self explanatory when you load it up.

 

 

From: adam grossmyer [mailto:agg...@gmail.com] 
Sent: Sunday, May 16, 2010 11:19 PM
To: Richard Clafton
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] NO transmit

 

I have had to reset the database once already to fix a problem with the 
panadapter.  I then had to reapply all the settings, the
only reason why I didn't do that again was I didn't know I could back up the 
database ( new kid on the block)let me see if I can
find where to back it up and try that. Thanks Rich

Adam

N8MOX

On Mon, May 17, 2010 at 12:14 AM, Richard Clafton  wrote:

Have you tried backing up and then resetting the database?

Richard
W5/G7EIX


-Original Message-
From: flexradio-boun...@flex-radio.biz 
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer
Sent: Sunday, May 16, 2010 11:08 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] NO transmit

Well I tried everything I could think of and rechecked all the settings
still no transmit on ssb only have power out on CW.
Adam
N8MOX

On Sun, May 16, 2010 at 8:24 PM, adam grossmyer  wrote:

> Hey all, the strangest thing just happened to me.  I was working some cw
> contest stations through out the day today,  I left the 3000 on all day, I
> switched to ssb and much to my surprise I went to key up and I get no power
> output what so ever.  I shut the radio down and restarted PSdr and still
> nothing.  I switched back over to cw and again full power output.  I am new
> to the 3000 by just a few days and not sure if I am missing something or
> not.  Any Ideas.
> 73
> Adam
> N8MOX
>

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/



 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] NO transmit

[Richard Clafton]

This may be worth looking at.  I have used the Restore Data from EEPROM to 
Database in the past to fix issues that seem to have been
caused by database corruption.

http://kc.flex-radio.com/KnowledgebaseArticle50378.aspx


-Original Message-
From: flexradio-boun...@flex-radio.biz 
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Richard Clafton
Sent: Sunday, May 16, 2010 11:15 PM
To: 'adam grossmyer'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] NO transmit

Have you tried backing up and then resetting the database?

Richard
W5/G7EIX

-Original Message-
From: flexradio-boun...@flex-radio.biz 
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer
Sent: Sunday, May 16, 2010 11:08 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] NO transmit

Well I tried everything I could think of and rechecked all the settings
still no transmit on ssb only have power out on CW.
Adam
N8MOX

On Sun, May 16, 2010 at 8:24 PM, adam grossmyer  wrote:

> Hey all, the strangest thing just happened to me.  I was working some cw
> contest stations through out the day today,  I left the 3000 on all day, I
> switched to ssb and much to my surprise I went to key up and I get no power
> output what so ever.  I shut the radio down and restarted PSdr and still
> nothing.  I switched back over to cw and again full power output.  I am new
> to the 3000 by just a few days and not sure if I am missing something or
> not.  Any Ideas.
> 73
> Adam
> N8MOX
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] NO transmit

[adam grossmyer]

Well after checking every setting I could think of, I found the problem.
Some how the mic input got unchecked and the flexwire input got checked, all
seems to be fine now,  yeah yeah i'm a knuckle head.
Thanks and 73
Adam
N8MOX

On Mon, May 17, 2010 at 12:19 AM, adam grossmyer  wrote:

> I have had to reset the database once already to fix a problem with the
> panadapter.  I then had to reapply all the settings, the only reason why I
> didn't do that again was I didn't know I could back up the database ( new
> kid on the block)let me see if I can find where to back it up and try
> that. Thanks Rich
> Adam
> N8MOX
>
>   On Mon, May 17, 2010 at 12:14 AM, Richard Clafton wrote:
>
>> Have you tried backing up and then resetting the database?
>>
>> Richard
>> W5/G7EIX
>>
>> -Original Message-
>> From: flexradio-boun...@flex-radio.biz [mailto:
>> flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer
>> Sent: Sunday, May 16, 2010 11:08 PM
>> To: flexradio@flex-radio.biz
>> Subject: Re: [Flexradio] NO transmit
>>
>> Well I tried everything I could think of and rechecked all the settings
>> still no transmit on ssb only have power out on CW.
>> Adam
>> N8MOX
>>
>> On Sun, May 16, 2010 at 8:24 PM, adam grossmyer  wrote:
>>
>> > Hey all, the strangest thing just happened to me.  I was working some cw
>> > contest stations through out the day today,  I left the 3000 on all day,
>> I
>> > switched to ssb and much to my surprise I went to key up and I get no
>> power
>> > output what so ever.  I shut the radio down and restarted PSdr and still
>> > nothing.  I switched back over to cw and again full power output.  I am
>> new
>> > to the 3000 by just a few days and not sure if I am missing something or
>> > not.  Any Ideas.
>> > 73
>> > Adam
>> > N8MOX
>> >
>>  ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flex-radio.com/  Homepage:
>> http://www.flex-radio.com/
>>
>>
>>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] NO transmit

[adam grossmyer]

I have had to reset the database once already to fix a problem with the
panadapter.  I then had to reapply all the settings, the only reason why I
didn't do that again was I didn't know I could back up the database ( new
kid on the block)let me see if I can find where to back it up and try
that. Thanks Rich
Adam
N8MOX

On Mon, May 17, 2010 at 12:14 AM, Richard Clafton wrote:

> Have you tried backing up and then resetting the database?
>
> Richard
> W5/G7EIX
>
> -Original Message-
> From: flexradio-boun...@flex-radio.biz [mailto:
> flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer
> Sent: Sunday, May 16, 2010 11:08 PM
> To: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] NO transmit
>
> Well I tried everything I could think of and rechecked all the settings
> still no transmit on ssb only have power out on CW.
> Adam
> N8MOX
>
> On Sun, May 16, 2010 at 8:24 PM, adam grossmyer  wrote:
>
> > Hey all, the strangest thing just happened to me.  I was working some cw
> > contest stations through out the day today,  I left the 3000 on all day,
> I
> > switched to ssb and much to my surprise I went to key up and I get no
> power
> > output what so ever.  I shut the radio down and restarted PSdr and still
> > nothing.  I switched back over to cw and again full power output.  I am
> new
> > to the 3000 by just a few days and not sure if I am missing something or
> > not.  Any Ideas.
> > 73
> > Adam
> > N8MOX
> >
>  ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flex-radio.com/  Homepage:
> http://www.flex-radio.com/
>
>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] NO transmit

[Richard Clafton]

Have you tried backing up and then resetting the database?

Richard
W5/G7EIX

-Original Message-
From: flexradio-boun...@flex-radio.biz 
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer
Sent: Sunday, May 16, 2010 11:08 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] NO transmit

Well I tried everything I could think of and rechecked all the settings
still no transmit on ssb only have power out on CW.
Adam
N8MOX

On Sun, May 16, 2010 at 8:24 PM, adam grossmyer  wrote:

> Hey all, the strangest thing just happened to me.  I was working some cw
> contest stations through out the day today,  I left the 3000 on all day, I
> switched to ssb and much to my surprise I went to key up and I get no power
> output what so ever.  I shut the radio down and restarted PSdr and still
> nothing.  I switched back over to cw and again full power output.  I am new
> to the 3000 by just a few days and not sure if I am missing something or
> not.  Any Ideas.
> 73
> Adam
> N8MOX
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] NO transmit

[adam grossmyer]

Well I tried everything I could think of and rechecked all the settings
still no transmit on ssb only have power out on CW.
Adam
N8MOX

On Sun, May 16, 2010 at 8:24 PM, adam grossmyer  wrote:

> Hey all, the strangest thing just happened to me.  I was working some cw
> contest stations through out the day today,  I left the 3000 on all day, I
> switched to ssb and much to my surprise I went to key up and I get no power
> output what so ever.  I shut the radio down and restarted PSdr and still
> nothing.  I switched back over to cw and again full power output.  I am new
> to the 3000 by just a few days and not sure if I am missing something or
> not.  Any Ideas.
> 73
> Adam
> N8MOX
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] NO transmit

[Tim Ellison]

What version of firmware and software are you using?

-Tim

Sent from my iPhone

On May 16, 2010, at 8:25 PM, "adam grossmyer"  wrote:

> Hey all, the strangest thing just happened to me.  I was working  
> some cw
> contest stations through out the day today,  I left the 3000 on all  
> day, I
> switched to ssb and much to my surprise I went to key up and I get  
> no power
> output what so ever.  I shut the radio down and restarted PSdr and  
> still
> nothing.  I switched back over to cw and again full power output.  I  
> am new
> to the 3000 by just a few days and not sure if I am missing  
> something or
> not.  Any Ideas.
> 73
> Adam
> N8MOX
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Re: [Flexradio] No Transmit

[Frank Mayer]

The frequencies that the rig will not transmit on are many and they change as 
the DDS number is changed in the setup area.  
  - Original Message - 
  From: Charles Greene 
  To: Frank Mayer ; FlexRadio@flex-radio.biz 
  Sent: Tuesday, January 09, 2007 12:35 AM
  Subject: Re: [Flexradio] No Transmit


  Frank,

  Is there any way to look at your .mbd with Microsoft Access?  If the 
  frequency in the Band Text Table has false in the transmit table, the 
  SDR will not transmit on that frequency.

  73,  Chas, W1CG


  At 07:09 PM 1/8/2007, Frank Mayer wrote:
  >I just did and it initially transmitted on those frequencies.  Then 
  >I started putting all my transmit profiles back in and memories and 
  >now it's doing the same thing agn in 1.9.0!
  >1.8.0 is still ok but I haven't changed any of the settings from 
  >default except for 48k to 96k sampling rate.  Oh boy
  >   - Original Message -
  >   From: Ray Andrews
  >   To: FlexRadio@flex-radio.biz
  >   Sent: Monday, January 08, 2007 6:25 PM
  >   Subject: Re: [Flexradio] No Transmit
  >
  >
  >   Frank,
  >
  >   I just tried v1.8.0 & SVN 821 and could not duplicate the problem.
  >
  >   I would suggest starting with a clean, new database.  Rename 
  > PowerSDR.mdb to something else & start the console.  When asked, do 
  > not import a previous version.
  >
  >   73, Ray, K9DUR
  >
  >   -- next part --
  >   An HTML attachment was scrubbed...
  >   URL: 
  > 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/5d6ce92c/attachment.html
 
  >
  >   ___
  >   FlexRadio mailing list
  >   FlexRadio@flex-radio.biz
  >   http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  >   Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  >   FlexRadio Homepage: http://www.flex-radio.com/
  >
  >   FlexRadio Knowledge Base: http://kb.flex-radio.com/
  >
  >
  >   --
  >   No virus found in this incoming message.
  >   Checked by AVG Free Edition.
  >   Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 
  > 1/7/2007 6:29 PM
  >
  >-- next part --
  >An HTML attachment was scrubbed...
  >URL: 
  
>http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/fee830c8/attachment.html
 
  >
  >___
  >FlexRadio mailing list
  >FlexRadio@flex-radio.biz
  >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  >FlexRadio Homepage: http://www.flex-radio.com/
  >
  >FlexRadio Knowledge Base: http://kb.flex-radio.com/




  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 
PM

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070109/568bb5be/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Charles Greene]

Frank,

Is there any way to look at your .mbd with Microsoft Access?  If the 
frequency in the Band Text Table has false in the transmit table, the 
SDR will not transmit on that frequency.

73,  Chas, W1CG


At 07:09 PM 1/8/2007, Frank Mayer wrote:
>I just did and it initially transmitted on those frequencies.  Then 
>I started putting all my transmit profiles back in and memories and 
>now it's doing the same thing agn in 1.9.0!
>1.8.0 is still ok but I haven't changed any of the settings from 
>default except for 48k to 96k sampling rate.  Oh boy
>   - Original Message -
>   From: Ray Andrews
>   To: FlexRadio@flex-radio.biz
>   Sent: Monday, January 08, 2007 6:25 PM
>   Subject: Re: [Flexradio] No Transmit
>
>
>   Frank,
>
>   I just tried v1.8.0 & SVN 821 and could not duplicate the problem.
>
>   I would suggest starting with a clean, new database.  Rename 
> PowerSDR.mdb to something else & start the console.  When asked, do 
> not import a previous version.
>
>   73, Ray, K9DUR
>
>   -- next part --
>   An HTML attachment was scrubbed...
>   URL: 
> http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/5d6ce92c/attachment.html
>  
>
>   ___
>   FlexRadio mailing list
>   FlexRadio@flex-radio.biz
>   http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>   Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>   FlexRadio Homepage: http://www.flex-radio.com/
>
>   FlexRadio Knowledge Base: http://kb.flex-radio.com/
>
>
>   --
>   No virus found in this incoming message.
>   Checked by AVG Free Edition.
>   Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 
> 1/7/2007 6:29 PM
>
>-- next part --
>An HTML attachment was scrubbed...
>URL: 
>http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/fee830c8/attachment.html
> 
>
>___
>FlexRadio mailing list
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>FlexRadio Homepage: http://www.flex-radio.com/
>
>FlexRadio Knowledge Base: http://kb.flex-radio.com/



___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Frank Mayer]

Now I'm getting somewhere.  Now 3885.003 doesn't transmit.  If I change the DDS 
setting to 458 from 468,  3885.003 works but 3885.018 doesn't transmit..I can 
hear a relay in the rig click when this happens.  
  - Original Message - 
  From: Tim Ellison 
  To: Frank Mayer ; Ray Andrews ; FlexRadio@flex-radio.biz 
  Sent: Monday, January 08, 2007 7:40 PM
  Subject: RE: [Flexradio] No Transmit


  Please enter the TX profiles and memories one at a time to see what
  parameter or combination of parameters is affecting the TX.

   
  -Tim W4TME
  

  -Original Message-
  From: [EMAIL PROTECTED]
  [mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer
  Sent: Monday, January 08, 2007 7:10 PM
  To: Ray Andrews; FlexRadio@flex-radio.biz
  Subject: Re: [Flexradio] No Transmit

  I just did and it initially transmitted on those frequencies.  Then I
  started putting all my transmit profiles back in and memories and now
  it's doing the same thing agn in 1.9.0!  
  1.8.0 is still ok but I haven't changed any of the settings from default
  except for 48k to 96k sampling rate.  Oh boy
- Original Message - 
From: Ray Andrews 
To: FlexRadio@flex-radio.biz 
Sent: Monday, January 08, 2007 6:25 PM
    Subject: Re: [Flexradio] No Transmit


Frank,

I just tried v1.8.0 & SVN 821 and could not duplicate the problem.

I would suggest starting with a clean, new database.  Rename
  PowerSDR.mdb to something else & start the console.  When asked, do not
  import a previous version.

73, Ray, K9DUR

-- next part --
An HTML attachment was scrubbed...
URL:
  http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
  s/20070108/5d6ce92c/attachment.html 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date:
  1/7/2007 6:29 PM

  -- next part --
  An HTML attachment was scrubbed...
  URL:
  http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
  s/20070108/fee830c8/attachment.html 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/


  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 
PM

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/bf3880b7/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Frank Mayer]

I think I'm getting somewhere now.  The DDS setting in Setup/General/Hardware 
Config is affecting the problem.  If I auto calibrate to WWV it sets to 468 and 
3885 starts to work.  It was previously set to "0" after the install.  It was 
set to 407 when all the other freqs weren't working. I'm afraid to touch it 
now!  I thought that setting just calibrated the frequency accuracy of the 
radio.
  - Original Message - 
  From: Tim Ellison 
  To: Frank Mayer ; Ray Andrews ; FlexRadio@flex-radio.biz 
  Sent: Monday, January 08, 2007 7:40 PM
  Subject: RE: [Flexradio] No Transmit


  Please enter the TX profiles and memories one at a time to see what
  parameter or combination of parameters is affecting the TX.

   
  -Tim W4TME
  

  -Original Message-
  From: [EMAIL PROTECTED]
  [mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer
  Sent: Monday, January 08, 2007 7:10 PM
  To: Ray Andrews; FlexRadio@flex-radio.biz
  Subject: Re: [Flexradio] No Transmit

  I just did and it initially transmitted on those frequencies.  Then I
  started putting all my transmit profiles back in and memories and now
  it's doing the same thing agn in 1.9.0!  
  1.8.0 is still ok but I haven't changed any of the settings from default
  except for 48k to 96k sampling rate.  Oh boy
- Original Message - 
From: Ray Andrews 
To: [EMAIL PROTECTED] 
Sent: Monday, January 08, 2007 6:25 PM
Subject: Re: [Flexradio] No Transmit


Frank,

I just tried v1.8.0 & SVN 821 and could not duplicate the problem.

I would suggest starting with a clean, new database.  Rename
  PowerSDR.mdb to something else & start the console.  When asked, do not
  import a previous version.

73, Ray, K9DUR

-- next part --
An HTML attachment was scrubbed...
URL:
  http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
  s/20070108/5d6ce92c/attachment.html 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date:
  1/7/2007 6:29 PM

  -- next part --
  An HTML attachment was scrubbed...
  URL:
  http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
  s/20070108/fee830c8/attachment.html 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/


  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 
PM

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/bc82a8d5/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Frank Mayer]

Now it will tranmit on 3885 if I turn the SR off!  What can cause this??
  - Original Message - 
  From: Tim Ellison 
  To: Frank Mayer ; Ray Andrews ; FlexRadio@flex-radio.biz 
  Sent: Monday, January 08, 2007 7:40 PM
  Subject: RE: [Flexradio] No Transmit


  Please enter the TX profiles and memories one at a time to see what
  parameter or combination of parameters is affecting the TX.

   
  -Tim W4TME
  

  -Original Message-
  From: [EMAIL PROTECTED]
  [mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer
  Sent: Monday, January 08, 2007 7:10 PM
  To: Ray Andrews; FlexRadio@flex-radio.biz
  Subject: Re: [Flexradio] No Transmit

  I just did and it initially transmitted on those frequencies.  Then I
  started putting all my transmit profiles back in and memories and now
  it's doing the same thing agn in 1.9.0!  
  1.8.0 is still ok but I haven't changed any of the settings from default
  except for 48k to 96k sampling rate.  Oh boy
- Original Message - 
From: Ray Andrews 
To: FlexRadio@flex-radio.biz 
Sent: Monday, January 08, 2007 6:25 PM
    Subject: Re: [Flexradio] No Transmit


Frank,

I just tried v1.8.0 & SVN 821 and could not duplicate the problem.

I would suggest starting with a clean, new database.  Rename
  PowerSDR.mdb to something else & start the console.  When asked, do not
  import a previous version.

73, Ray, K9DUR

-- next part --
An HTML attachment was scrubbed...
URL:
  http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
  s/20070108/5d6ce92c/attachment.html 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date:
  1/7/2007 6:29 PM

  -- next part --
  An HTML attachment was scrubbed...
  URL:
  http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
  s/20070108/fee830c8/attachment.html 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/


  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 
PM

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/a68f99bd/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Tim Ellison]

Please enter the TX profiles and memories one at a time to see what
parameter or combination of parameters is affecting the TX.

 
-Tim W4TME


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer
Sent: Monday, January 08, 2007 7:10 PM
To: Ray Andrews; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] No Transmit

I just did and it initially transmitted on those frequencies.  Then I
started putting all my transmit profiles back in and memories and now
it's doing the same thing agn in 1.9.0!  
1.8.0 is still ok but I haven't changed any of the settings from default
except for 48k to 96k sampling rate.  Oh boy
  - Original Message - 
  From: Ray Andrews 
  To: FlexRadio@flex-radio.biz 
  Sent: Monday, January 08, 2007 6:25 PM
  Subject: Re: [Flexradio] No Transmit


  Frank,

  I just tried v1.8.0 & SVN 821 and could not duplicate the problem.

  I would suggest starting with a clean, new database.  Rename
PowerSDR.mdb to something else & start the console.  When asked, do not
import a previous version.

  73, Ray, K9DUR

  -- next part --
  An HTML attachment was scrubbed...
  URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
s/20070108/5d6ce92c/attachment.html 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/


  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date:
1/7/2007 6:29 PM

-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
s/20070108/fee830c8/attachment.html 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Frank Mayer]

I just did and it initially transmitted on those frequencies.  Then I started 
putting all my transmit profiles back in and memories and now it's doing the 
same thing agn in 1.9.0!  
1.8.0 is still ok but I haven't changed any of the settings from default except 
for 48k to 96k sampling rate.  Oh boy
  - Original Message - 
  From: Ray Andrews 
  To: FlexRadio@flex-radio.biz 
  Sent: Monday, January 08, 2007 6:25 PM
  Subject: Re: [Flexradio] No Transmit


  Frank,

  I just tried v1.8.0 & SVN 821 and could not duplicate the problem.

  I would suggest starting with a clean, new database.  Rename PowerSDR.mdb to 
something else & start the console.  When asked, do not import a previous 
version.

  73, Ray, K9DUR

  -- next part --
  An HTML attachment was scrubbed...
  URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/5d6ce92c/attachment.html
 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/


  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 
PM

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/fee830c8/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Frank Mayer]

I just deleted 1.8.0 completely from the hard drive and reloaded it.  Transmits 
on those frequencies now...Go figure.  I'll now try the same thing with 1.9.0.  
It works too.  Very frustrating..
  - Original Message - 
  From: Frank Mayer 
  To: Frank Mayer ; FlexRadio@flex-radio.biz 
  Sent: Monday, January 08, 2007 5:59 PM
  Subject: Re: [Flexradio] No Transmit


  I just tried  software version 1.6.3 (K6JCA) and I don't have the problem 
with this software.  
- Original Message - 
From: Frank Mayer 
To: FlexRadio@flex-radio.biz 
Sent: Monday, January 08, 2007 5:39 PM
Subject: [Flexradio] No Transmit


I have discovered today that there are some frequencies throughout the 
bands that the radio will not transmit on.  1862 khz, 1862.057, 1861.990,  
1861.969, etc.  I can find these frequencies by changing the vfo while the rig 
is tranmitting.  I can hear a relay click inside the rig when it gets to these 
frequencies and then the rig will not tranmit.  Go up or down 1hz and the rig 
will once agn transmit.  Any ideas?
Frank  WY3D
-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/afe3360e/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 
6:29 PM

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/951f34a3/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Ray Andrews]

Frank,

I just tried v1.8.0 & SVN 821 and could not duplicate the problem.

I would suggest starting with a clean, new database.  Rename PowerSDR.mdb to 
something else & start the console.  When asked, do not import a previous 
version.

73, Ray, K9DUR

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/5d6ce92c/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No Transmit

[Frank Mayer]

I just tried  software version 1.6.3 (K6JCA) and I don't have the problem with 
this software.  
  - Original Message - 
  From: Frank Mayer 
  To: FlexRadio@flex-radio.biz 
  Sent: Monday, January 08, 2007 5:39 PM
  Subject: [Flexradio] No Transmit


  I have discovered today that there are some frequencies throughout the bands 
that the radio will not transmit on.  1862 khz, 1862.057, 1861.990,  1861.969, 
etc.  I can find these frequencies by changing the vfo while the rig is 
tranmitting.  I can hear a relay click inside the rig when it gets to these 
frequencies and then the rig will not tranmit.  Go up or down 1hz and the rig 
will once agn transmit.  Any ideas?
  Frank  WY3D
  -- next part --
  An HTML attachment was scrubbed...
  URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/afe3360e/attachment.html
 
  ___
  FlexRadio mailing list
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  FlexRadio Homepage: http://www.flex-radio.com/

  FlexRadio Knowledge Base: http://kb.flex-radio.com/


  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 
PM

-- next part --
An HTML attachment was scrubbed...
URL: 
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/ca784ba1/attachment.html
 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/

FlexRadio Knowledge Base: http://kb.flex-radio.com/

Re: [Flexradio] No transmit after 675

[José Dumoulin]

Svn 679 : Tune works if Mox is engaged.

73 José
F5JD

José Dumoulin a écrit :
> Tune does not work with my D44 either.
>
> José F5JD
>
> Dave Kiefer a écrit :
>   
>> I have transmit on SVN679 but the tune button does not work with the
>> Firebox.
>>
>> Dave Kiefer - N4DWK
>>
>>   
>>
>> ___
>> FlexRadio mailing list
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> FlexRadio Homepage: http://www.flex-radio.com
>>
>>
>>   
>> 
>
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com
>
>
>   

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] No transmit after 675

[José Dumoulin]

Tune does not work with my D44 either.

José F5JD

Dave Kiefer a écrit :
> I have transmit on SVN679 but the tune button does not work with the
> Firebox.
>
> Dave Kiefer - N4DWK
>
>   
>
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com
>
>
>   

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] No transmit after 675

[Dave Kiefer]

I have transmit on SVN679 but the tune button does not work with the
Firebox.

Dave Kiefer - N4DWK

> 

___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Re: [Flexradio] No transmit after 675

[Gary W Strong]

Richard:

What alpha version are you using?  Are you using a Personus?

I don't have tune output, let alone any other mode with version 676 and
later.  However, I have no problems when switching back to 675, or earlier
versions.

Gary

-Original Message-
From: Richard Bischoff [mailto:[EMAIL PROTECTED] 
Sent: Wednesday, September 13, 2006 9:08 PM
To: 'Gary W Strong'
Subject: RE: [Flexradio] No transmit after 675


Gary,
I have to Tune, but CW and Phone appear ok.
Rick, W6RCB

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gary W Strong
Sent: Wednesday, September 13, 2006 5:43 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] No transmit after 675
Importance: High

Alpha updates after 675 have no transmit output for me.  I rechecked those
before, and the software works fine on transmit.  After (676 and up to last)
do not.
 
I am using a Personus Firebox.
 
Gary AI4IN
-- next part --
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20060913/7e5a375f/attachment
.html 
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com


___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com