Re: [Flexradio] PSDR v2.0.16 and now no TX Power
I had this all the time on .16. I just did a DB reset tonight so I will see if that improves it. Mike va3mw On Sunday, December 5, 2010, Tim Ellison wrote: > Make sure you power cycle the radio. Upgrading to 2.0 loads a new firmware > version and the soft reset may not have properly rebooted the radio. > > > -Tim > > > -Original Message- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of W8HW > Sent: Sunday, December 05, 2010 5:37 PM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] PSDR v2.0.16 and now no TX Power > > No TX power output using PSDR v2.0.16 > > I was running PSDR v2.0.8 TX worked fine > about a month ago switched to PSDR v1.18.6 TX worked fine > Today I downgraded VAC to version 9.0 TX worked fine > > Now I switched to PSDR v2.0.16 and now no TX Power. Everything works fine > even digital on RX. When I key the TX (in any mode) the unit goes into tx > mode, but now no power out. I have tried several bands and different modes. > It gives no power out in tune or TX. I tried CW at 50% drive and Zero power > in all ways. > > What did I do to cause this? > > Thanks, Bruce, W8HW > w...@att.net > > Flex- 3000 > PSDR v2.0.16 (Now) > Computer Dell computer running MS XP Professional SP3 CPU Intel Xeon 5130 > @2.00 Ghz with 2m Ran > > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] PSDR v2.0.16 and now no TX Power
Make sure you power cycle the radio. Upgrading to 2.0 loads a new firmware version and the soft reset may not have properly rebooted the radio. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of W8HW Sent: Sunday, December 05, 2010 5:37 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] PSDR v2.0.16 and now no TX Power No TX power output using PSDR v2.0.16 I was running PSDR v2.0.8 TX worked fine about a month ago switched to PSDR v1.18.6 TX worked fine Today I downgraded VAC to version 9.0 TX worked fine Now I switched to PSDR v2.0.16 and now no TX Power. Everything works fine even digital on RX. When I key the TX (in any mode) the unit goes into tx mode, but now no power out. I have tried several bands and different modes. It gives no power out in tune or TX. I tried CW at 50% drive and Zero power in all ways. What did I do to cause this? Thanks, Bruce, W8HW w...@att.net Flex- 3000 PSDR v2.0.16 (Now) Computer Dell computer running MS XP Professional SP3 CPU Intel Xeon 5130 @2.00 Ghz with 2m Ran ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] PSDR v2.0.16 and now no TX Power
I would export your current database to a safe area and then reinitialize the database and see if the problem persists. 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 On Sun, Dec 5, 2010 at 5:37 PM, W8HW wrote: > No TX power output using PSDR v2.0.16 > > I was running PSDR v2.0.8 TX worked > fine > about a month ago switched to PSDR v1.18.6 TX worked fine > Today I downgraded VAC to version 9.0 TX worked fine > > Now I switched to PSDR v2.0.16 and now no TX Power. Everything works fine > even digital > on RX. When I key the TX (in any mode) the unit goes into tx mode, but now > no > power out. I have tried several bands and different modes. It gives no > power > out in tune or TX. I tried CW at 50% drive and Zero power in all ways. > > What did I do to cause this? > > Thanks, Bruce, W8HW > w...@att.net > > Flex- 3000 > PSDR v2.0.16 (Now) > Computer Dell computer running MS XP Professional SP3 > CPU Intel Xeon 5130 @2.00 Ghz with 2m Ran > > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
