LUAR BIASA!!! ABSENSI SIDIK JARI HANYA 1, 3 JUTA = LIFETIME WARANTY
· ABSENSI SIDIK JARI TERBAIK DI INDONESIA · Penyedia Solusi Pengamanan Sistem, Aplikasi dan Data Perusahaan Menggunakan Teknologi Sidik Jari Pertama di Indonesia (lebih aman daripada menggunakan password,unique ID,encryption,dll) Hanya 1,3JT GARANSI SPARE PART 3 TAHUN GARANSI SERVICE LIFETIME TINGGALKAN ABSENSI MANUAL ANDA BERALIHLAH MENGGUNAKAN ABSENSI SIDIK JARI Hub : Rosnita Fingerspot (021) 93229090/ (021) 62202861 Please visit us @ www.fingerspot .com PT BiomeTrik Citra Solusi ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
Current best version for router use
Hi list, A bit of advice please, folks. We currently use 6.2-release + Quagga as a router on a number of boxes. These are stable but we have seen some CPU issues recently and clearly the code is all getting old now, and so I'm starting to look at updating them. Specifically, the hardware consists of a single dual-core Xeon at 2GHz with 2G RAM, containing 10x em interfaces (2x quad PCI-X cards, plus 2 onboard) . IRQ sharing is a bit of an issue and only 8 of those 1G ports can be used without re-using an interrupt. They run with polling enabled, with kern.polling.user_frac = 22 These routers run Quagga 0.99.7 doing v4 and v6 OSPF/BGP. We do use a number of vlans and a couple of gif tunnels. Total throughput varies quite a lot - from 50M to about 200M - but usually isn't high. There seem to be a lot of issues that have appeared around 8.0 and the em code, and although patches have quickly appeared, I know that a lot of the forwarding and routing code in 8 is new - so whilst I would normally have just tested this with 8 and not considered anything else, I am thinking that maybe sticking with 7 is a better plan. I'd appreciate any input from anyone who is using 8.0 in a similar environment, any advice and suggestions would be gratefully received. Thanks, Paul. ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
Re: Current best version for router use
Hi Paul There seem to be a lot of issues that have appeared around 8.0 and the em code, and although patches have quickly appeared, I know that a lot of the forwarding and routing code in 8 is new - so whilst I would normally have just tested this with 8 and not considered anything else, I am thinking that maybe sticking with 7 is a better plan. I have been using FreeBSD 8.0 and as well 7.2 but from a routing perspective i would say you could go ahead with 8.0 for the reason being 7.2 still does not support ECMP but 8.0 supports ECMP which is quite important but having said that load balancing and fast protection has got issues in 8.0 too but from a longer run 8.0 would be better choice as Qing and other few people are putting lot of fixes to flowtable and general routing infrastructure . Hope this helps Thanks, Cheers, - Balaji On 4/22/10, Paul Thornton p...@prt.org wrote: Hi list, A bit of advice please, folks. We currently use 6.2-release + Quagga as a router on a number of boxes. These are stable but we have seen some CPU issues recently and clearly the code is all getting old now, and so I'm starting to look at updating them. Specifically, the hardware consists of a single dual-core Xeon at 2GHz with 2G RAM, containing 10x em interfaces (2x quad PCI-X cards, plus 2 onboard) . IRQ sharing is a bit of an issue and only 8 of those 1G ports can be used without re-using an interrupt. They run with polling enabled, with kern.polling.user_frac = 22 These routers run Quagga 0.99.7 doing v4 and v6 OSPF/BGP. We do use a number of vlans and a couple of gif tunnels. Total throughput varies quite a lot - from 50M to about 200M - but usually isn't high. There seem to be a lot of issues that have appeared around 8.0 and the em code, and although patches have quickly appeared, I know that a lot of the forwarding and routing code in 8 is new - so whilst I would normally have just tested this with 8 and not considered anything else, I am thinking that maybe sticking with 7 is a better plan. I'd appreciate any input from anyone who is using 8.0 in a similar environment, any advice and suggestions would be gratefully received. Thanks, Paul. ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
3-Line MLPPP DSL on BSD - MTU/MRRU/MRU??
Hi Guys, I have posted this question in a few different forums but I have not had much luck with a response and I'm hoping someone can help me out. I recently upgraded to a triple-5meg DSL service setup with MLPPP here in Ontario Canada through a provider called Teksavvy. I chose FreeBSD as my o/s of choice and I'm using MPD5.5 to bond the connections. I believe they are using Juniper equipment on their end, not sure if it matters. I have been using Linux for 15 years, and am an AIX Infrastructure Analyst by trade, but I am not very familiar with more advanced networking terms and technologies, and I am pretty new to FreeBSD. I was wondering if someone could help me with the optimal values for my mpd.conf file - Max Transmit units, Max recieve unit, all that stuff. Here is what I've got going so far... Please note I am not on the freebsd-net mailing list so if you could CC me on the responses that would be great! default: load DSL DSL: create bundle static B1 set iface route default set ipcp ranges 0.0.0.0/0 0.0.0.0/0 set ipcp enable req-pri-dns set ipcp enable req-sec-dns set ipcp disable vjcomp set bundle disable round-robin set bundle disable bw-manage set bundle links L1 L2 L3 set iface mtu 1492 set iface disable on-demand set iface enable tcpmssfix create link static L1 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set link max-redial 0 set link keep-alive 10 60 set pppoe iface fxp1 set pppoe service teksavvy set link enable multilink set link enable shortseq set link disable protocomp set link mrru 1500 # set link mru 1500 set link mtu 1492 set link bandwidth 5056000 set link action bundle B1 open create link static L2 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set link max-redial 0 set link keep-alive 10 60 set pppoe iface fxp2 set pppoe service teksavvy set link enable multilink set link enable shortseq set link disable protocomp set link mrru 1500 # set link mru 1500 set link mtu 1492 set link bandwidth 5056000 set link action bundle B1 open create link static L3 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set link max-redial 0 set link keep-alive 10 60 set pppoe iface fxp3 set pppoe service teksavvy set link enable multilink set link enable shortseq set link disable protocomp set link mrru 1500 # set link mru 1500 set link mtu 1492 set link bandwidth 5056000 set link action bundle B1 open I can't really recall why I commented the MRU values - I think they defaulted to 1500 anyway. I adapted the config from a fast 2 Line setup posted in another forum around here. When I tested it as two lines, it was definitely as fast as it could go. Not as impressed with the 3 line setup. Any advice or direction on this would be greatly appreciated. Thanks David Carrick Senior AIX Infrastructure Analyst AIX Services | Spectra Energy 519.436.4600 x2464 (desk) 800.571.8446 x2464 (toll free) 519.437.7194 (cell) dcarr...@uniongas.commailto:dcarr...@uniongas.com For first call resolution please contact the Spectra Energy Enterprise IT Help Desk @ local or toll free @ 1-866-252-8881 ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
Re: 3-Line MLPPP DSL on BSD - MTU/MRRU/MRU??
On 4/22/10 8:35 AM, Carrick, David wrote: Hi Guys, I have posted this question in a few different forums but I have not had much luck with a response and I'm hoping someone can help me out. I recently upgraded to a triple-5meg DSL service setup with MLPPP here in Ontario Canada through a provider called Teksavvy. I chose FreeBSD as my o/s of choice and I'm using MPD5.5 to bond the connections. I believe they are using Juniper equipment on their end, not sure if matters. I have been using Linux for 15 years, and am an AIX Infrastructure Analyst by trade, but I am not very familiar with more advanced networking terms and technologies, and I am pretty new to FreeBSD. I was wondering if someone could help me with the optimal values for my mpd.conf file - Max Transmit units, Max recieve unit, all that stuff. Here is what I've got going so far... Please note I am not on the freebsd-net mailing list so if you could CC me on the responses that would be great! Not my area of best knowledge but a couple of points.. Use 'load' to abstract away common items from the links Try not to reference things until after they are defined.. is this working? and if not, what happens? (keep list on Cc please) # How I would have structured it: # just off the top of my head.. untested and probably with errors. default: load DSL common: set link max-redial 0 set link keep-alive 10 60 set pppoe service teksavvy set link enable multilink set link enable shortseq set link disable protocomp set link mrru 1500 # set link mru 1500 set link mtu 1492 set link bandwidth 5056000 set link action bundle B1 L1: create link static L1 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set pppoe iface fxp1 load common open L2: create link static L2 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set pppoe iface fxp2 load common open L3: create link static L3 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set pppoe iface fxp3 load common open DSL: create bundle static B1 set iface route default set ipcp ranges 0.0.0.0/0 0.0.0.0/0 set ipcp enable req-pri-dns set ipcp enable req-sec-dns set ipcp disable vjcomp set bundle disable round-robin set bundle disable bw-manage set iface mtu 1492 set iface disable on-demand set iface enable tcpmssfix load L1 load L2 load L3 set bundle links L1 L2 L3 ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
RE: 3-Line MLPPP DSL on BSD - MTU/MRRU/MRU??
The config works - just don't think it is optimal. I structured it based on the mpd5.conf.sample and some other configurations stolen from dslreports.com. I am looking more for advised MRU/MTU, and MRRU values for the links and the bundle as a whole as I do not believe my settings are optimal. I have tested a 2link configuration with similar values and obtained very, very fast speeds. Adding the 3rd link with the settings below does improve the speed, but I do not feel it is as fast as it should be. Repsectfully, David Carrick AIX Services | Spectra Energy 519.436.4600 x2464 (desk) 800.571.8446 x2464 (toll free) 519.437.7194 (cell) -Original Message- From: Julian Elischer [mailto:julianelisc...@gmail.com] On Behalf Of Julian Elischer Sent: April-22-10 12:12 PM To: Carrick, David Cc: freebsd-net@freebsd.org Subject: Re: 3-Line MLPPP DSL on BSD - MTU/MRRU/MRU?? On 4/22/10 8:35 AM, Carrick, David wrote: Hi Guys, I have posted this question in a few different forums but I have not had much luck with a response and I'm hoping someone can help me out. I recently upgraded to a triple-5meg DSL service setup with MLPPP here in Ontario Canada through a provider called Teksavvy. I chose FreeBSD as my o/s of choice and I'm using MPD5.5 to bond the connections. I believe they are using Juniper equipment on their end, not sure if matters. I have been using Linux for 15 years, and am an AIX Infrastructure Analyst by trade, but I am not very familiar with more advanced networking terms and technologies, and I am pretty new to FreeBSD. I was wondering if someone could help me with the optimal values for my mpd.conf file - Max Transmit units, Max recieve unit, all that stuff. Here is what I've got going so far... Please note I am not on the freebsd-net mailing list so if you could CC me on the responses that would be great! Not my area of best knowledge but a couple of points.. Use 'load' to abstract away common items from the links Try not to reference things until after they are defined.. is this working? and if not, what happens? (keep list on Cc please) # How I would have structured it: # just off the top of my head.. untested and probably with errors. default: load DSL common: set link max-redial 0 set link keep-alive 10 60 set pppoe service teksavvy set link enable multilink set link enable shortseq set link disable protocomp set link mrru 1500 # set link mru 1500 set link mtu 1492 set link bandwidth 5056000 set link action bundle B1 L1: create link static L1 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set pppoe iface fxp1 load common open L2: create link static L2 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set pppoe iface fxp2 load common open L3: create link static L3 pppoe set auth authname x...@wiredhighspeed.com set auth password xxx set pppoe iface fxp3 load common open DSL: create bundle static B1 set iface route default set ipcp ranges 0.0.0.0/0 0.0.0.0/0 set ipcp enable req-pri-dns set ipcp enable req-sec-dns set ipcp disable vjcomp set bundle disable round-robin set bundle disable bw-manage set iface mtu 1492 set iface disable on-demand set iface enable tcpmssfix load L1 load L2 load L3 set bundle links L1 L2 L3 ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
Re: net/mpd5, ppp, proxy-arp issues
Hello, Thanks a lot for the patch, Qing! It works fine. However I've noticed one thing, after I start mpd5 and connect to my home network: kernel: WARNING: attempt to domain_add(netgraph) after domainfinalize() Not very sure if this is something to worry about or not? Regards, Marin On Tue, Apr 20, 2010 at 11:03 AM, Qing Li qin...@freebsd.org wrote: I was using csup to track RELEN_8_0 branch. Currently I'm syncing to RELENG_8. If I understood you right, after getting the sources for RELENG_8, I need to apply the patch and then rebuild world? You only need to rebuild the kernel. -- Qing -- Marin Atanasov Nikolov dnaeon AT gmail DOT com daemon AT unix-heaven DOT org ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
Re: 3-Line MLPPP DSL on BSD - MTU/MRRU/MRU??
On 04/22/10 18:14, Carrick, David wrote: The config works - just don't think it is optimal. I structured it based on the mpd5.conf.sample and some other configurations stolen from dslreports.com. I am looking more for advised MRU/MTU, and MRRU values for the links and the bundle as a whole as I do not believe my settings are optimal. I have tested a 2link configuration with similar values and obtained very, very fast speeds. Adding the 3rd link with the settings below does improve the speed, but I do not feel it is as fast as it should be. Tried using hping or other tools to manually discover path MTU in both directions? Yes many DSLAMs clip it below 1500 due to ATM and PPPoA framing overhead. ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
