ipfilter error on 5.3
Hello, I'm getting a strange startup error from ipfilter on system boot. This is on a 5.3 box and happens whether i load ipfilter as a kld, i am not doing this i've found that method relies on having ipv6 enabled which i don't want, or loading it in to the kernel. I've added: options IPFILTER to the kernel, recompiled and rebooted. I then added: ipfilter_enable="YES" ipfilter_rules="/etc/ipf.rules" and another reboot. Ipfilter starts logs, but immediately after i get logging enabled i get this: Enabling ipfilter. ioctl(SIOCIPFL6): Invalid argument Any suggestions? I don't know if this is a show stopper, if it's not loading, but i'd like toknow what this error is and get rid of it if possible. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: openoffice running on 5.3
* Chris Neustrup [2004-11-18 18:55 -0800] > I am running a 5.3 stable box. Works fine. I want to put openoffice > on it, but the ports are all either broken or marked as broken. > Should I go back to StarOffice, or just try to slog it out? editors/openoffice-1.1 is not marked as broken on my system. However, it takes forever to compile, so I never did finish it to verify that it indeed does compile, but I have no reason not to think it will. You can find precompiled packages here: http://oootranslation.services.openoffice.org/pub/OpenOffice.org/ooomisc/FreeBSD/ There you'll find OOo 1.1.3 for both 4.10 and 5.3 Cheers, Svein Halvor ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: gimp help files
Gary Aitken wrote: Hello all, After installing gimp, I discovered the help files for the running program were not present. Tried to add them using make WITH_HTML_HELP_BROWSER=yes install This is about the BROWSER, I believe, not about installing the help files. but they didn't show up. (I did a deinstall / clean but still no help) /usr/X11R6/share/gimp/help is never created. What am I missing? This is about Gimp 2.0, isn't it? I had same problem in the past and I got a reply that this version of gimp not yet comes with the help pages. As often the case, help and doc pages are lacking behind the coding work. Maybe 2.1 will come with full documentation. R. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD 5.3 with 4GB RAM - memory ignored
Hi. Our new x345 Server with 1 XEON 2.8GHz CPU (second one will be built in next week) has 4GB RAM. I see the following message while the system is booting: "131072 of memory aboce 4GB ignored" Well, i will use all the memory i paid for ;-), so what will do the trick to use all of the memory on that box? I thought problems with large amount of memory >=4GB are gone with 5.3-STABLE. Thanks in advance. asg ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: gimp help files
On Friday, 19 November 2004 at 0:09:44 -0700, Gary Aitken wrote: > Hello all, > > After installing gimp, I discovered the help files > for the running program were not present. Tried to > add them using > make WITH_HTML_HELP_BROWSER=yes install Maybe "make -DWITH_HTML_HELP_BROWSER install" works? Kjell > but they didn't show up. > (I did a deinstall / clean but still no help) > /usr/X11R6/share/gimp/help is never created. > What am I missing? > > Thanks for any hints, > > Gary ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
firefox & thunderbird upgrade problem
Hello all, I upgraged thunderbird and firefox via portupgrade. Things kinda work ok, except I cannot modify preferences, and it doesn't see any of my old mail, which leads me to believe it doesn't like my .thunderbird and .mozilla directory hierarchy. All of the subdirectories and files in the .thunderbird tree are owned and writeable by the user, yet no modifications to the configuration (preferences) will write. The same goes for firefox. Can someone give me a clue as to what is going on? It behaves as if some directory is not writeable, but I sure can't find it. Thanks for any pointers, Gary ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
BlackBox slow
I have an older ThinkPad notebook with FreeBSD 5.3. I use BlackBox window manager, which is great, but it takes it around 40 seconds to start up. TWM starts in 15 seconds and Gnome in 40 too. I have something like this in .xinitrc: xsetroot ... & xhost ... & bbkeys ... & blackbox and it doesn't change much if I add or remove a line. What is your experience with BlackBox? Is there a BB clone without slit and taskbar or something like that? -- Regards, Karel ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
gimp help files
Hello all, After installing gimp, I discovered the help files for the running program were not present. Tried to add them using make WITH_HTML_HELP_BROWSER=yes install but they didn't show up. (I did a deinstall / clean but still no help) /usr/X11R6/share/gimp/help is never created. What am I missing? Thanks for any hints, Gary ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: FW: FreeBSD donation (sponsorship)
> -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Charles Ulrich > Sent: Thursday, November 18, 2004 7:54 AM > To: Loren M. Lang > Cc: stheg olloydson; [EMAIL PROTECTED] > Subject: Re: FW: FreeBSD donation (sponsorship) > > > > Loren M. Lang said: > >> Hello, > >> > >> I speak only for myself, not the FBSD project or community. I think > >> this is a lovely spam^H^H^H^Hoffer. One question though, would you be > >> hosting freebsd.org on a Linux or Windows server? Judging by your site > >> it could be either. > >> http://www.netnation.com/products/managedhosting.php > >> Who decides? > > > > $ telnet www.netnation.com http > > Trying 204.174.223.48... > > Connected to www.netnation.com. > > Escape character is '^]'. > > HEAD / HTTP/1.0 > > > > HTTP/1.1 301 Moved Permanently > > Date: Thu, 18 Nov 2004 09:30:10 GMT > > Server: Apache/1.3.26 (Unix) Debian GNU/Linux PHP/4.1.2 mod_ssl/2.8.9 > > OpenSSL/0.9.6c mod_jk/1.1.0 > > Location: http://www.netnation.com/ > > Connection: close > > Content-Type: text/html; charset=iso-8859-1 > > > > At least it's not Micro$oft IIS 4.0 > > What kind of silliness is this? A genuine offer of support comes > literally out > of thin air he two of the three responses that the FreeBSD community sends > back are borderline hostile. One accuses the originator of being > a spammer and > the other engages in a tasteless display of OS bashing. What > evidence have you > that their intentions were not sincere? > Charles, I think it is valid for the question to be asked as to why the poster isn't using FreeBSD. Of course the original poster can choose to ignore the question if they don't want to answer. Microsoft makes it very clear to any of their vendors (Connexxion etc.) that those vendors must host on Windows. I think you would find the same attitude among Apple, Sun, and others. And if you think the responses here are bad you ought to try offering to host a Linux website in a Linux group on FreeBSD, you would be lucky to escape with any skin left. Note that the original poster took pains to explain that they were a hosting company since 1997. This explanation is irrelevant if all they wanted to do is to know the address to send money to. It seemed pretty clear to me that the offer was the usual "We're a hosting provider and you seem to have a busy website, we will host it for free for you in exchange for a link to us" Perhaps I am too cynical for you, but it so happens that I work at an ISP and we have made the same offer before to others. (Not to FreeBSD) This is very common in the industry in fact. His post was pretty close to what I've sent out myself before. I must hasten to add there's nothing wrong with quid pro quo among commercial hosting companies. Probably 3/4ths of the 501(c) organizations on the Internet are hosted for free due to these kinds of arraingements. Hell, look at us, we should talk - Silicon Breeze got a plug right on the front of the freebsd.org website, and there is a quid-pro-quo going on there. So his post really wasn't out of line, with the exception that he quite obviously didn't know what he was making his offer to. And as well, his post was not surprising - as if you search the donation pages, you will find that hosting is the one thing that is NOT listed in the want pages for donations! Ted ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Patching
Hi, if you update your source tree through cvsup now and them, is it still necessary to follow the FreeBSD security advisories and patch your system? In others words, when you cvsup the source through RELENG_5_3 and make the world, does it include all the security patches you see at FreeBSD.org? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: oracle 9.2.0.4 client on freebsd 5.3
In the last episode (Nov 19), eodyna said: > I am having trouble starting Oracle Enterprise Manger on Freebsd 5.3 > > I have succesfully installed the client. Yay for me :) After the > client installation, the net assist was run and oem was automatically > started. (so i kinda know it works) > > WHen i try to run oemapp from the command line (logged in as oracle) > i get the following error message > > bash-2.05b$ oemapp > expr: syntax error > jre was not found in > /data01/oracle/jre/1.1.8/bin//data01/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre You probably need to run that script from a Linux bash shell, so it sees linux's expr .. > it appears that these directories are concatinated together but im > not sure. jre definately exists in those directories. > > when i try to run oemapp as a user other than oracle i > get the following error message > > -su-2.05b$ oemapp > dirname: illegal option -- p > usage: dirname path > arch: not found .. and Linux's dirname and arch :) > /data01/oracle/jre/1.1.8/bin/jre: 101: Syntax error: > word unexpected (expecting ")") -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
desktop-file-utils
Hello Am I the only one who cannot build gnome2.8 from ports? I get stopped because it cannot download "desktop-file-utils-0.9.tar.gz". This should be found at http://freedesktop.org but the site was compromised and is not back up yet. ftp.freebsd.org has 0.7 which is not what the port calls for. I google'd for the file but only had one hit and it did not have the file. If anyone who has this file send it to me i would appreciate it. I don't understand why this has not been on any of the mail lists. Is there a work-around I could do? Robert ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Start gnome's gdm at once
> > How do you start gnome's at once, without going to the command prompt and > > doing 'gdm'? > # cd /usr/X11R6/etc/rc.d > # mv gdm.sh.sample gdm.sh Another alternative to this would be to edit /etc/ttys with a line like this: ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm off secure Except that you'll need to set the path (xdm's path) to gdm's path. -- If I write a signature, my emails will appear more personalised. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: No output from Kernel Booting Up or /dev/console
Ash wrote: [snip] Well, I looked and looked for what was wrong, and I was 100% sure it wasn't anything in the /boot directory. However, just to be sure I copied everything in /boot and /boot/default from another FreeBSD 5.3R system I had, and it started working again. I have no idea what file it was or how it got changed, but thanks Ash. -Tabor ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: nvidia driver install-unable to read seeprom
On 11/18/04 10:42 PM, Stephen L. Martin sat at the `puter and typed: > Hello, > > I am trying to install the nvidia-driver (1.0.6113_2) on 5.3-RELEASE. > The installation fails and locks the computer, what looks like, right at > the end. This is what happens: > > Install -o root -g wheel -m 555 nvidia.ko /boot/modules > kldxref /boot/modules > ===> lib > ===> lib/GL > ===> lib/libnvidia-tls > ===> lib/libGLcore > ===> lib/libXvMCNVIDIA > ===> lib/compat > ===> lib/compat/libGL > ===> lib/compat/libnvidia-tls > ===> lib/compat/libGLcore > ===> x11 > ===> x11/driver > ===> x11/extension > ===> etc > ===> doc > ahd1: mem 0-0x1fff at device 10.1 > on pci0 Unable to read SEEPROM > > At this point the whole machine is locked...can't even ping it...and > this happens every time I try the install. Everything else runs > fine...only this install is causing problems. > > Here's some relevant dmesg output: > > da0 at ahd0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-3 device > da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged > Queueing Enabled > da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) > ahd0: port > 0xed00-0xedff,0xe000-0xe0ff mem > 0xfe40-0xfe401fff irq 16 at device 10.0 on pci0 > ahd0: [GIANT-LOCKED] > ahd1: at device 10.1 on pci0 > device_attach: ahd1 attach returned 12 > da0 at ahd0 bus 0 target 0 lun 0 > > And it's an Asus a7v880 board. > > The only strange thing I see in here is the "attach returned 12". In the > handbook it says to try adding "hw.pci.allow_unsupported_io_range=1", > but it looks like this was taken out in 5.3 > > Anything else to try?...Any more info needed? Am I missing the video card you have? That would be a fairly important bit of info. :) Also, do you already have Xorg or XFree86 running? What does 'Xorg -configure' say the card is? - run that as root and it will create xorg.conf.new in /root. That will give an idea what the card claims to be. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Economics is extremely useful as a form of employment for economists. -- John Kenneth Galbraith ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
oracle 9.2.0.4 client on freebsd 5.3
Greetings all, I am having trouble starting Oracle Enterprise Manger on Freebsd 5.3 I have succesfully installed the client. Yay for me :) After the client installation, the net assist was run and oem was automatically started. (so i kinda know it works) WHen i try to run oemapp from the command line (logged in as oracle) i get the following error message bash-2.05b$ oemapp expr: syntax error jre was not found in /data01/oracle/jre/1.1.8/bin//data01/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre it appears that these directories are concatinated together but im not sure. jre definately exists in those directories. when i try to run oemapp as a user other than oracle i get the following error message -su-2.05b$ oemapp dirname: illegal option -- p usage: dirname path arch: not found /data01/oracle/jre/1.1.8/bin/jre: 101: Syntax error: word unexpected (expecting ")") any ideas on how to fix this? Im kinda stumped. Thanks. ams Find local movie times and trailers on Yahoo! Movies. http://au.movies.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Start gnome's gdm at once
On Thu, 18 Nov 2004, Cam wrote: How do you start gnome's at once, without going to the command prompt and doing 'gdm'? # cd /usr/X11R6/etc/rc.d # mv gdm.sh.sample gdm.sh All scripts in this (and other directories called rc.d) will be executed during system start, if their name ends on .sh . See also # man rc.d Regards, Uli. +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Installation Question 5.3-RELEASE
> I have the 5.3-RELEASE CD which I have used to install 5.3 on a laptop > I have. I would like to add packages/ports now but have a slight > issue. The laptop doesn't have internet access. Nor is there any > easy way to put it on the internet. How can I go about installing > both packages and ports on this laptop? > There are many packages that came with the CDs upon release. Those are always available to you. It seems as though you must have some method of getting to the internet. If you acquire packages or required distribution files for building a given port via the internet and then put it on transferrable media (like a CD-RW, for instance) you should be able to install them off of that media. For ports, you get the files that the given port requires (in /usr/ports///distinfo, IIRC) and put them in /usr/ports/distfiles and for packages, you simply get the package and pkg_add . -- If I write a signature, my emails will appear more personalised. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Installation Question 5.3-RELEASE
I have the 5.3-RELEASE CD which I have used to install 5.3 on a laptop I have. I would like to add packages/ports now but have a slight issue. The laptop doesn't have internet access. Nor is there any easy way to put it on the internet. How can I go about installing both packages and ports on this laptop? Thanks in advance. Tom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Start gnome's gdm at once
How do you start gnome's at once, without going to the command prompt and doing 'gdm'? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
nvidia driver install-unable to read seeprom
Hello, I am trying to install the nvidia-driver (1.0.6113_2) on 5.3-RELEASE. The installation fails and locks the computer, what looks like, right at the end. This is what happens: Install -o root -g wheel -m 555 nvidia.ko /boot/modules kldxref /boot/modules ===> lib ===> lib/GL ===> lib/libnvidia-tls ===> lib/libGLcore ===> lib/libXvMCNVIDIA ===> lib/compat ===> lib/compat/libGL ===> lib/compat/libnvidia-tls ===> lib/compat/libGLcore ===> x11 ===> x11/driver ===> x11/extension ===> etc ===> doc ahd1: mem 0-0x1fff at device 10.1 on pci0 Unable to read SEEPROM At this point the whole machine is locked...can't even ping it...and this happens every time I try the install. Everything else runs fine...only this install is causing problems. Here's some relevant dmesg output: da0 at ahd0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) ahd0: port 0xed00-0xedff,0xe000-0xe0ff mem 0xfe40-0xfe401fff irq 16 at device 10.0 on pci0 ahd0: [GIANT-LOCKED] ahd1: at device 10.1 on pci0 device_attach: ahd1 attach returned 12 da0 at ahd0 bus 0 target 0 lun 0 And it's an Asus a7v880 board. The only strange thing I see in here is the "attach returned 12". In the handbook it says to try adding "hw.pci.allow_unsupported_io_range=1", but it looks like this was taken out in 5.3 Anything else to try?...Any more info needed? Thanks, Stephen ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: basic sendmail problem
On Thursday 18 November 2004 05:58 pm, Gene wrote: > Check /etc/mail for >relay-domains > and >local-host-names > > I had to put my "host.domain.net" in each of these as well as access in > order > to get sendmail 8.13.1 to work. Thanks, everything works now. So it was either this, or rebooting after changing /etc/hosts, or both. Or something :) -David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Does anyone know ks_limit equivalent in FreeBSD 5
Hi, In FreeBSD 4.x in "malloc_type" structure we have a member called "ks_limit" what is the equivalent of this in 5.x world? For sure it is not ks_size. Do we need to compute it based on kmemzones? Appreciate any pointers on how to get the memory limit. Raghu ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: basic sendmail problem
David Syphers wrote: I've previously used sendmail in a very simple configuration - it just forwards my mail to another address. I now want to do that again, and find that it no longer works. I'm using Sendmail 8.13.1 on 6-CURRENT from 20040905 (i.e. pretty much FreeBSD 5, but with one crucial fix so it would boot on my computer). Check /etc/mail for relay-domains and local-host-names I had to put my "host.domain.net" in each of these as well as access in order to get sendmail 8.13.1 to work. Best luc\k-- Gene ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
openoffice running on 5.3
I am running a 5.3 stable box. Works fine. I want to put openoffice on it, but the ports are all either broken or marked as broken. Should I go back to StarOffice, or just try to slog it out? tia, cn. -- This line blank left intentionally Warning: Due to circumstances beyond your control, these are my opinions Chris Neustrup [EMAIL PROTECTED] 925/935-7970 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
HP scanner on SCSI
I have an HP color flat bed scanner ScanJet 3C. The FreeBSD 5.3 recognizes it as Fixed Processor SCSI-2 device So the question is: has anyone put this specific device on a FreeBSD box and used it successfully? If no, then how might I approach this as a general SCSI device and write my own image grabbing sw. tia, cn. -- This line blank left intentionally Warning: Due to circumstances beyond your control, these are my opinions Chris Neustrup [EMAIL PROTECTED] 925/935-7970 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Mailavenger + Qmail
Hi All, I was wondering if anyone on the list has any experience with MailAvenger, preferably in conjunction with Qmail, that they could provide me with some hints. The mailavenger website isn't all that helpful with setting it up. Cheers Tim -- Tim Aslat <[EMAIL PROTECTED]> Spyderweb Consulting http://www.spyderweb.com.au Phone: +61 0401088479 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: No output from Kernel Booting Up or /dev/console
Tabor Kelly wrote: The is on a Dell Inspiron 1100 notebook (celeron 2.3Ghz) running FreeBSD 5.3R. When I boot my laptop I see the Beastie menu, and after making a selection, I get no output from boot1 or the kernel. So, when my laptop is done booting, my screen looks like this: /boot/kernel/acpi.ko text=0x3fbfc data=0x1c04+0x112c syms=[0x4+0x72f0+0x4+0x97c7 ] - FreeBSD/i386 (laptop.taborandtashell.net) (ttyv0) login: Also, nothing that would normally be displayed on ttyv0 via /dev/console (syslog stuff) is there. Booting with ACPI disabled does not help. The weird thing is that this didn't used to happen. Right before all of this started, I was trying to get my touch pad working and I: 1. ran /stand/sysinstall and played with mouse settings. 2. edited /etc/rc.conf 3. created /boot/device.hints (I tried removing device.hints, it didn't help) [SNIP] Tabor, Is it possible that your console is being redirected to a com port? The handbook covers this topic in section 20.6. Also some quick info that might help you out: There are a few places that this can be configured: boot.conf, /boot/loader.conf, /boot/loader.conf.local or /boot/loader.rc. If /boot.conf refer to the Handbook Section 20.6 as well as boot(8)'s man page. In either /boot/loader.conf or /boot/loader.conf.local for the following line: console=comconsole In /boot/loader.rc check for: set console=comconsole To set your console to display on your monitor using /boot/loader.conf or /boot/loader.conf.local set (or replace) the following: console=vidconsole In /boot/loader.rc console=vidconsole Good Luck, -Ash ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
On 11/18/04 02:23 PM, Bill Schoolcraft sat at the `puter and typed: > At Thu, 18 Nov 2004 it looks like Brian Henning composed: > > > I am running FBSD 4.10, does the /etc/nsswitch.conf file work on > > freebsd 4.10 or is it just for 5.X? > > That's a good question for I don't see it on my 4.10, but it's a > very old, or very "inherent" file in all the Unix based systems > I've seen. It comes from Solaris operating systems by origin. According to /usr/src/UPDATING it was imported from NetBSD in September of 2000: 2906: nsswitch has been imported from NetBSD. Among other things, this means that /etc/host.conf is no longer used. See nsswitch.conf(5) instead. Note that at boot time rc.network will attempt to produce a new nsswitch.conf file for you if you don't have one, and you have host.conf. Why it never showed up in 4.10 I couldn't say, but I have two 4.10 boxes with nary a hint of nsswitch.conf except in the linux compat directories. Only my 5.3 box has it in /etc/. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Performance: A statement of the speed at which a computer system works. Or rather, might work under certain circumstances. Or was rumored to be working over in Jersey about a month ago. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
No output from Kernel Booting Up or /dev/console
The is on a Dell Inspiron 1100 notebook (celeron 2.3Ghz) running FreeBSD 5.3R. When I boot my laptop I see the Beastie menu, and after making a selection, I get no output from boot1 or the kernel. So, when my laptop is done booting, my screen looks like this: /boot/kernel/acpi.ko text=0x3fbfc data=0x1c04+0x112c syms=[0x4+0x72f0+0x4+0x97c7 ] - FreeBSD/i386 (laptop.taborandtashell.net) (ttyv0) login: Also, nothing that would normally be displayed on ttyv0 via /dev/console (syslog stuff) is there. Booting with ACPI disabled does not help. The weird thing is that this didn't used to happen. Right before all of this started, I was trying to get my touch pad working and I: 1. ran /stand/sysinstall and played with mouse settings. 2. edited /etc/rc.conf 3. created /boot/device.hints (I tried removing device.hints, it didn't help) Here is /etc/rc.conf: sshd_enable="YES" usbd_enable="YES" pccard_enable="YES" hostname="laptop.taborandtashell.net" moused_port="/dev/psm0" moused_type="auto" moused_enable="YES" Here is /boot/devices.hints: hint.psm.0.at="atkbdc" hint.psm.0.irq="12" # the next line was added for touchpad hint.psm.0.flags="0x1000" dmesg shows: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.30GHz (2292.57-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff real memory = 535597056 (510 MB) avail memory = 514543616 (490 MB) npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_tz0: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring pci0: on pcib0 agp0: mem 0xf6f8-0xf6ff,0xe000-0xe7ff irq 11 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M uhci0: port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib1: at device 30.0 on pci0 pci2: on pcib1 bfe0: mem 0xfcffe000-0xfcff irq 5 at device 1.0 on pci2 miibus0: on bfe0 bmtphy0: on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:0d:56:af:f7:1f bfe0: [GIANT-LOCKED] cbb0: at device 4.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: at device 31.5 (no driver attached) atkbdc0: port 0x66,0x62,0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: flags 0x1000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: at iomem 0xc-0xcbfff on isa0 pmtimer0 on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter "TSC" frequency 2292572548 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: CDRW at ata0-master UDMA33 ad2: 19077MB [38760/16/63] at ata1-master UDMA100 Mounting root from ufs:/dev/ad2s1a More info: Other than this, my computer still works fine. I have tried this with and without /boot/loader.conf, which has one line: linux_load="YES" Thanks For Any Help You Can Give Me, Tabor Kelly ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: BSD equivalents of autoconf, automake, etc.
One of the reasons I have been asking this is I will be spearheading a side project at work to port a device driver (a library, really) from Win32 to Linux. I *really* don't want to use Linux to write this. Since it's really just going to be a shared library that talks to a serial port, most of the code will be straight C/C++, and I just need to worry about the serial port semantics. However, we will probably use a Linux box at work for development. I'd like to set up a platform-independent build environment so I can code/test/run this on my BSD laptop. Any suggestions on where to start? jm -- My other computer is your Windows box. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CANNOT SSH to my computer
On Thursday 18 November 2004 07:08 pm, Lowell Gilbert wrote: > Ivan Georgiev <[EMAIL PROTECTED]> writes: > > On Thursday 18 November 2004 06:00 pm, Sebastian Holmqvist wrote: > > > On Thu, 18 Nov 2004 17:44:05 -0500, Ivan Georgiev <[EMAIL PROTECTED]> wrote: > > > > On Thursday 18 November 2004 08:42 am, Sebastian Holmqvist wrote: > > > > > On Thu, 18 Nov 2004 13:26:05 +, Daniel Bye > > > > > > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > On Thu, Nov 18, 2004 at 07:49:03AM -0500, Ivan Georgiev wrote: > > > > > > > I changed PasswordAuthentication to 'yes' and this time it asks > > > > > > > me 6 times for my password (3 times beginning with "Password:" > > > > > > > > > > > > You can disable these first three by changing > > > > > > ChallengeResponseAuthentication to no. > > > > > > > > > > > > > and another 3 times with "Password for [EMAIL PROTECTED]) > > > > > > > and rejects me again with the same message from sshd. > > > > > > > > > > > > Sounds like a silly question, I know, but are you typing your > > > > > > password correctly? For example, is your local keymap sending > > > > > > the right characters to the server? > > > > > > > > > > > > > Adding more verbosity didn't help me to understand the problem. > > > > > > > I also noticed that my ida_dsa.pub key ends with "ivan@" . > > > > > > > Usualy I have seen it ending with "[EMAIL PROTECTED]". > > > > > > > Is this a problem? > > > > > > > > > > > > No, I don't think so. It is just a convenient identifier for > > > > > > human consumption - it's somewhat easier to use the last little > > > > > > bit of the key than to try and remember the whole keyblock! > > > > > > > > > > > > Have you copied ida_dsa.pub from the client machine to your > > > > > > ~/.ssh/authorized_keys file on the server? > > > > > > > > > > > > > > > > > > > > > > > > Dan > > > > > > > > > > > > -- > > > > > > Daniel Bye > > > > > > > > > > > > PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc > > > > > > PGP Key fingerprint: 3B9D 8BBB EB03 BA83 5DB4 3B88 86FC F03A 90A1 > > > > > > BE8F _ ASCII ribbon campaign ( ) - against HTML, vCards and X - > > > > > > proprietary attachments in e-mail / \ > > > > > > > > > > Sure you have changed your keymap? > > > > > > > > > > And sorry if I misunderstood, are you trying to ssh to the computer > > > > > you're sitting on? > > > > > > > > I do not think I have done any changes to the keymap. And, yes, I am > > > > trying to connect to the computer I am sitting on plus have tried to > > > > connect from my office computer. In both cases no luck. > > > > > > > > I will appreciate if you can help me to resolve the issue. > > > > > > > > Thanks, > > > > > > > > > > > > Ivan > > > > > > When you connect from the office-computer, what happends? > > > > As I said - rejects with Permission denied and a message the log: > > sshd[25413]: Failed password for ivan from MY_OFFICE_COMPUTER_ADDRESS > > port 44517 ssh2 > > Try "ssh -v" (and if that doesn't tell you enough, "ssh -vv") and look > at the debug output when it asks for and rejects the password. If that > doesn't give you more of a clue, try doing the equivalent with sshd. I have tried that already but cannot understand where the problem is. Here is small part of the sshd log: debug1: userauth-request for user ivan service ssh-connection method password debug1: attempt 5 failures 4 debug2: input_userauth_request: try method password debug3: mm_auth_password entering debug3: mm_request_send entering: type 10 debug3: monitor_read: checking request 10 debug3: mm_answer_authpassword: sending result 1 debug3: mm_request_send entering: type 11 debug3: mm_request_receive_expect entering: type 46 debug3: mm_request_receive entering debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD debug3: mm_request_receive_expect entering: type 11 debug3: mm_request_receive entering debug3: mm_auth_password: user authenticated debug3: mm_do_pam_account entering debug3: mm_request_send entering: type 46 debug3: mm_request_send entering: type 47 Failed password for ivan from XXX.XXX.XXX.XXX port 55958 ssh2 debug3: mm_request_receive entering debug3: mm_request_receive_expect entering: type 47 debug3: mm_request_receive entering debug3: mm_do_pam_account returning 0 Failed password for ivan from XXX.XXX.XXX.XXX port 55958 ssh2 Connection closed by XXX.XXX.XXX.XXX debug1: do_cleanup debug1: PAM: cleanup debug3: PAM: sshpam_thread_cleanup entering debug1: do_cleanup debug1: PAM: cleanup debug3: PAM: sshpam_thread_cleanup entering and from ssh -vvv [EMAIL PROTECTED]'s password: debug3: packet_send2: adding 64 (len 59 padlen 5 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentications that can continue: publickey,password debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,password). Thank you for looking at this, Ivan ___ [EMAI
Re: CANNOT SSH to my computer
Ivan Georgiev <[EMAIL PROTECTED]> writes: > On Thursday 18 November 2004 06:00 pm, Sebastian Holmqvist wrote: > > On Thu, 18 Nov 2004 17:44:05 -0500, Ivan Georgiev <[EMAIL PROTECTED]> wrote: > > > On Thursday 18 November 2004 08:42 am, Sebastian Holmqvist wrote: > > > > On Thu, 18 Nov 2004 13:26:05 +, Daniel Bye > > > > > > > > <[EMAIL PROTECTED]> wrote: > > > > > On Thu, Nov 18, 2004 at 07:49:03AM -0500, Ivan Georgiev wrote: > > > > > > I changed PasswordAuthentication to 'yes' and this time it asks me > > > > > > 6 times for my password (3 times beginning with "Password:" > > > > > > > > > > You can disable these first three by changing > > > > > ChallengeResponseAuthentication to no. > > > > > > > > > > > and another 3 times with "Password for [EMAIL PROTECTED]) and > > > > > > rejects me again with the same message from sshd. > > > > > > > > > > Sounds like a silly question, I know, but are you typing your > > > > > password correctly? For example, is your local keymap sending the > > > > > right characters to the server? > > > > > > > > > > > Adding more verbosity didn't help me to understand the problem. I > > > > > > also noticed that my ida_dsa.pub key ends with "ivan@" . Usualy I > > > > > > have seen it ending with "[EMAIL PROTECTED]". Is this a > > > > > > problem? > > > > > > > > > > No, I don't think so. It is just a convenient identifier for human > > > > > consumption - it's somewhat easier to use the last little bit of the > > > > > key than to try and remember the whole keyblock! > > > > > > > > > > Have you copied ida_dsa.pub from the client machine to your > > > > > ~/.ssh/authorized_keys file on the server? > > > > > > > > > > > > > > > > > > > > Dan > > > > > > > > > > -- > > > > > Daniel Bye > > > > > > > > > > PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc > > > > > PGP Key fingerprint: 3B9D 8BBB EB03 BA83 5DB4 3B88 86FC F03A 90A1 > > > > > BE8F _ ASCII ribbon campaign ( ) - against HTML, vCards and X - > > > > > proprietary attachments in e-mail / \ > > > > > > > > Sure you have changed your keymap? > > > > > > > > And sorry if I misunderstood, are you trying to ssh to the computer > > > > you're sitting on? > > > > > > I do not think I have done any changes to the keymap. And, yes, I am > > > trying to connect to the computer I am sitting on plus have tried to > > > connect from my office computer. In both cases no luck. > > > > > > I will appreciate if you can help me to resolve the issue. > > > > > > Thanks, > > > > > > > > > Ivan > > > > > When you connect from the office-computer, what happends? > > As I said - rejects with Permission denied and a message the log: > sshd[25413]: Failed password for ivan from MY_OFFICE_COMPUTER_ADDRESS port > 44517 ssh2 Try "ssh -v" (and if that doesn't tell you enough, "ssh -vv") and look at the debug output when it asks for and rejects the password. If that doesn't give you more of a clue, try doing the equivalent with sshd. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CANNOT SSH to my computer
On Thursday 18 November 2004 06:00 pm, Sebastian Holmqvist wrote: > On Thu, 18 Nov 2004 17:44:05 -0500, Ivan Georgiev <[EMAIL PROTECTED]> wrote: > > On Thursday 18 November 2004 08:42 am, Sebastian Holmqvist wrote: > > > On Thu, 18 Nov 2004 13:26:05 +, Daniel Bye > > > > > > <[EMAIL PROTECTED]> wrote: > > > > On Thu, Nov 18, 2004 at 07:49:03AM -0500, Ivan Georgiev wrote: > > > > > I changed PasswordAuthentication to 'yes' and this time it asks me > > > > > 6 times for my password (3 times beginning with "Password:" > > > > > > > > You can disable these first three by changing > > > > ChallengeResponseAuthentication to no. > > > > > > > > > and another 3 times with "Password for [EMAIL PROTECTED]) and > > > > > rejects me again with the same message from sshd. > > > > > > > > Sounds like a silly question, I know, but are you typing your > > > > password correctly? For example, is your local keymap sending the > > > > right characters to the server? > > > > > > > > > Adding more verbosity didn't help me to understand the problem. I > > > > > also noticed that my ida_dsa.pub key ends with "ivan@" . Usualy I > > > > > have seen it ending with "[EMAIL PROTECTED]". Is this a > > > > > problem? > > > > > > > > No, I don't think so. It is just a convenient identifier for human > > > > consumption - it's somewhat easier to use the last little bit of the > > > > key than to try and remember the whole keyblock! > > > > > > > > Have you copied ida_dsa.pub from the client machine to your > > > > ~/.ssh/authorized_keys file on the server? > > > > > > > > > > > > > > > > Dan > > > > > > > > -- > > > > Daniel Bye > > > > > > > > PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc > > > > PGP Key fingerprint: 3B9D 8BBB EB03 BA83 5DB4 3B88 86FC F03A 90A1 > > > > BE8F _ ASCII ribbon campaign ( ) - against HTML, vCards and X - > > > > proprietary attachments in e-mail / \ > > > > > > Sure you have changed your keymap? > > > > > > And sorry if I misunderstood, are you trying to ssh to the computer > > > you're sitting on? > > > > I do not think I have done any changes to the keymap. And, yes, I am > > trying to connect to the computer I am sitting on plus have tried to > > connect from my office computer. In both cases no luck. > > > > I will appreciate if you can help me to resolve the issue. > > > > Thanks, > > > > > > Ivan > When you connect from the office-computer, what happends? As I said - rejects with Permission denied and a message the log: sshd[25413]: Failed password for ivan from MY_OFFICE_COMPUTER_ADDRESS port 44517 ssh2 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: kernedl build snafu.
On Thu, Nov 18, 2004 at 04:58:00PM -0600, Kevin D. Kinsey, DaleCo, S.P. wrote: > Gary Kline wrote: > > > Hi Folks, > > > > On my 5.3 laptop I was able to add ^device sound and > > ^device snd_mss and build/install the kernel without > > ay problems. On my test server I'm trying to add > > ^device snd_sb16 but the build doesn't like it. > > > > > > > > > > > > > >sb16.o(.text+0x12): In function `sb_lock': > >: undefined reference to `sbc_lock' > >sb16.o(.text+0x2a): In function `sb_lockassert': > >: undefined reference to `sbc_lockassert' > >sb16.o(.text+0x42): In function `sb_unlock': > >: undefined reference to `sbc_unlock' > >*** Error code 1 > > > >Stop in /usr/obj/usr/src/sys/SARTRE. > > > > > > What am I doing wrong on this other computer? And-or is > > there a way of adding smd_sb.ko at boot time? Save the > > rebuilds? > > > > thanks, > > > > gary > > > > > > Since it is a kernel object (*.ko), you should certainly be > able to load it at boot time from /boot/loader.conf > Thanks. I was thinking of kldloading from rc.local, then figured that I may as well hard-wire it. I'll try loader.conf and see. gary -- Gary Kline [EMAIL PROTECTED] www.thought.org Public service Unix ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: kernedl build snafu.
On Thu, Nov 18, 2004 at 02:52:54PM -0800, Gary Kline wrote: > > Hi Folks, > > On my 5.3 laptop I was able to add ^device sound and > ^device snd_mss and build/install the kernel without > ay problems. On my test server I'm trying to add > ^device snd_sb16 but the build doesn't like it. This is almost always because you've forgotten to add some other kernel system upon which the thing you changed depends. This is documented in comments in the sample kernel config files, as well as in the manpages. Kris pgpqBwAPhVQ71.pgp Description: PGP signature
Re: kernedl build snafu.
Gary Kline wrote: Hi Folks, On my 5.3 laptop I was able to add ^device sound and ^device snd_mss and build/install the kernel without ay problems. On my test server I'm trying to add ^device snd_sb16 but the build doesn't like it. sb16.o(.text+0x12): In function `sb_lock': : undefined reference to `sbc_lock' sb16.o(.text+0x2a): In function `sb_lockassert': : undefined reference to `sbc_lockassert' sb16.o(.text+0x42): In function `sb_unlock': : undefined reference to `sbc_unlock' *** Error code 1 Stop in /usr/obj/usr/src/sys/SARTRE. What am I doing wrong on this other computer? And-or is there a way of adding smd_sb.ko at boot time? Save the rebuilds? thanks, gary Since it is a kernel object (*.ko), you should certainly be able to load it at boot time from /boot/loader.conf KDK ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
kernedl build snafu.
Hi Folks, On my 5.3 laptop I was able to add ^device sound and ^device snd_mss and build/install the kernel without ay problems. On my test server I'm trying to add ^device snd_sb16 but the build doesn't like it. MAKE=/usr/obj/usr/src/make.i386/make sh /usr/src/sys/conf/newvers.sh GENERIC cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/altq -I/usr/src/sys/contrib/ipfilter -I/usr/src/sys/contrib/pf -I/usr/src/sys/contrib/dev/ath -I/usr/src/sys/contrib/dev/ath/freebsd -I/usr/src/sys/contrib/ngatm -D_KERNEL -include opt_global.h -fno-common -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -mno-align-long-strings -mpreferred-stack-boundary=2 -ffreestanding -Werror vers.c linking kernel sb16.o(.text+0x12): In function `sb_lock': : undefined reference to `sbc_lock' sb16.o(.text+0x2a): In function `sb_lockassert': : undefined reference to `sbc_lockassert' sb16.o(.text+0x42): In function `sb_unlock': : undefined reference to `sbc_unlock' *** Error code 1 Stop in /usr/obj/usr/src/sys/SARTRE. What am I doing wrong on this other computer? And-or is there a way of adding smd_sb.ko at boot time? Save the rebuilds? thanks, gary -- Gary Kline [EMAIL PROTECTED] www.thought.org Public service Unix ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CANNOT SSH to my computer
On Thursday 18 November 2004 08:42 am, Sebastian Holmqvist wrote: > On Thu, 18 Nov 2004 13:26:05 +, Daniel Bye > > <[EMAIL PROTECTED]> wrote: > > On Thu, Nov 18, 2004 at 07:49:03AM -0500, Ivan Georgiev wrote: > > > I changed PasswordAuthentication to 'yes' and this time it asks me 6 > > > times for my password (3 times beginning with "Password:" > > > > You can disable these first three by changing > > ChallengeResponseAuthentication to no. > > > > > and another 3 times with "Password for [EMAIL PROTECTED]) and > > > rejects me again with the same message from sshd. > > > > Sounds like a silly question, I know, but are you typing your password > > correctly? For example, is your local keymap sending the right > > characters to the server? > > > > > Adding more verbosity didn't help me to understand the problem. I also > > > noticed that my ida_dsa.pub key ends with "ivan@" . Usualy I have seen > > > it ending with "[EMAIL PROTECTED]". Is this a problem? > > > > No, I don't think so. It is just a convenient identifier for human > > consumption - it's somewhat easier to use the last little bit of the key > > than to try and remember the whole keyblock! > > > > Have you copied ida_dsa.pub from the client machine to your > > ~/.ssh/authorized_keys file on the server? > > > > > > > > Dan > > > > -- > > Daniel Bye > > > > PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc > > PGP Key fingerprint: 3B9D 8BBB EB03 BA83 5DB4 3B88 86FC F03A 90A1 BE8F > > _ > > ASCII ribbon campaign ( ) > > - against HTML, vCards and X > > - proprietary attachments in e-mail / \ > > Sure you have changed your keymap? > > And sorry if I misunderstood, are you trying to ssh to the computer > you're sitting on? I do not think I have done any changes to the keymap. And, yes, I am trying to connect to the computer I am sitting on plus have tried to connect from my office computer. In both cases no luck. I will appreciate if you can help me to resolve the issue. Thanks, Ivan ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
On Thu, Nov 18, 2004 at 01:15:15PM -0800, Curtis Vaughan said: > > > > o update from cvs > > # cd /usr/src > > # make update > > o build world/kernel in your normal or single-user mode > > # cd /usr/obj > > # rm -rf * > > # cd /usr/src > > # make buildworld > > # make buildkernel KERNCONF=YOURKERNEL > > o install kernel/world in single user mode > > # reboot [ Choose single User Mode ] > > # cd /usr/src > > # make installkernel KERNCONF=YOURKERNEL > > # make installworld > > o run mergemaster -p > > # mergemaster -p > > o reboot > > # reboot > > > >It's fairly straight-forward once you get the gist :) > > > > > Following Adam's suggestion, I have now gotten to the point where I > rebooted into Single-User Mode, entered the /usr/src directory and then > entered the command: > make installkernel KERNCONF=MYKERNEL > > But it almost immediately comes back with errors about the fact that > certain directories don't exist and problems with the fact that the > file system is read only. > > Perhaps I entered Single User Mode wrong? On a reboot, I chose not to > boot into any system, but to go directly to the loader prompt > (something like that). Then I entered the command: boot -s Single user mode will, by default, leave you with only your / partition mounted as read-only. It does this to protect itself. You'll need to remount your partitions with 'mount -a'. Sorry, I forgot to include that step :) -- Adam Smith Internode : http://www.internode.on.net Phone : (08) 8228 2999 Dog for sale: Eats lots and is fond of children. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
On Thu, Nov 18, 2004 at 12:12:36PM -0800, Curtis Vaughan said: > > > >So basically: > > > > o update from cvs > > # cd /usr/src > > # make update > > o build world/kernel in your normal or single-user mode > > # cd /usr/obj > > # rm -rf * > > # cd /usr/src > > # make buildworld > > # make buildkernel KERNCONF=YOURKERNEL > > > Adam! > > Sorry to bother you again, but I got as for as make buildworld, after > which I typed "make buildkernel KERNCONF=MYKERNEL" > and I got: This would look for a custom kernel file called /usr/src/sys/i386/conf/MYKERNEL. It has to exist before it can be compiled. Usually I name my kernel after my machine; in my case it's gremlin, so 'make buildkernel KERNCONF=GREMLIN'. > > cod# make buildkernel KERNCONF=MYKERNEL > ERROR: Missing kernel configuration file(s) (MYKERNEL). > false > *** Error code 1 > > Stop in /usr/src. > *** Error code 1 > > Stop in /usr/src. > > Any ideas why? > > Curtis > > > > o install kernel/world in single user mode > > # reboot [ Choose single User Mode ] > > # cd /usr/src > > # make installkernel KERNCONF=YOURKERNEL > > # make installworld > > o run mergemaster -p > > # mergemaster -p > > o reboot > > # reboot > > > >It's fairly straight-forward once you get the gist :) > -- Adam Smith Internode : http://www.internode.on.net Phone : (08) 8228 2999 Dog for sale: Eats lots and is fond of children. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
On Thu, Nov 18, 2004 at 12:15:02PM -0800, Curtis Vaughan said: > Maybe you can disregard that. Looking at "The Complete FreeBSD" I see > that you can just use GENERIC, if you want. So, I typed: Oh! I had just answered, too :-) > make buildworld KERNCONF=GENERIC > > and off it went. > > Any reason why I wouldn't want to use GENERIC? I haven't compiled > anything special for my kernel. None at all, except that using GENERIC gives you a base-line kernel to go back to if you have any problems. It's a good habit to use a different file name as your main kernel if you are going to do any kernel changes. -- Adam Smith Internode : http://www.internode.on.net Phone : (08) 8228 2999 Dog for sale: Eats lots and is fond of children. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: IRC recommendation?
On Tue, Nov 16, 2004 at 08:00:52PM -0500, Marty Landman said: > I'm looking for a free chat application that will work for my office > network. Have 'nix and windoz machines running. If you are just looking for a way to get your inter-office staff to communicate, I would recommend a Jabber server over an IRC-style network. You can then have an instant-message program like Gaim or Psi connect to it (Windows and BSD versions both available) people can easily message each other. You can also join chat rooms when you need to conference. http://www.jabber.org/. -- Adam Smith Internode : http://www.internode.on.net Phone : (08) 8228 2999 Dog for sale: Eats lots and is fond of children. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
At Thu, 18 Nov 2004 it looks like Brian Henning composed: > I am running FBSD 4.10, does the /etc/nsswitch.conf file work on > freebsd 4.10 or is it just for 5.X? That's a good question for I don't see it on my 4.10, but it's a very old, or very "inherent" file in all the Unix based systems I've seen. It comes from Solaris operating systems by origin. -- Bill Schoolcraft PO Box 210076 San Francisco,CA 94121 http://billschoolcraft.com "We can find no wealth above a healthy body and a happy heart." ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
On 11/18/04 04:09 PM, Brian Henning sat at the `puter and typed: > On Thu, 18 Nov 2004 14:06:33 -0800 (PST), Bill Schoolcraft > <[EMAIL PROTECTED]> wrote: > > At Thu, 18 Nov 2004 it looks like Brian Henning composed: > > > > > > > > > Greetings All: > > > > > > Is it possible to add a line above that name server entries in the > > > resolv.conf file that will tell the system to check the hosts file for > > > a resolution before querying the dns server(s)? > > > > That is normally done in /etc/nsswitch.conf > > > > -- > > Bill Schoolcraft > > PO Box 210076 > > San Francisco,CA 94121 > > http://billschoolcraft.com > > > > "We can find no wealth above a healthy body and a happy heart." > > > > > > > I am running FBSD 4.10, does the /etc/nsswitch.conf file work on > freebsd 4.10 or is it just for 5.X? That's new in 5.3. 4.10 still uses /etc/host.conf. In 5.3, /etc/host.conf is automagically generated from /etc/nsswitch.conf. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Anything cut to length will be too short. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
On Thu, 18 Nov 2004 14:06:33 -0800 (PST), Bill Schoolcraft <[EMAIL PROTECTED]> wrote: > At Thu, 18 Nov 2004 it looks like Brian Henning composed: > > > > > Greetings All: > > > > Is it possible to add a line above that name server entries in the > > resolv.conf file that will tell the system to check the hosts file for > > a resolution before querying the dns server(s)? > > That is normally done in /etc/nsswitch.conf > > -- > Bill Schoolcraft > PO Box 210076 > San Francisco,CA 94121 > http://billschoolcraft.com > > "We can find no wealth above a healthy body and a happy heart." > > I am running FBSD 4.10, does the /etc/nsswitch.conf file work on freebsd 4.10 or is it just for 5.X? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
At Thu, 18 Nov 2004 it looks like Brian Henning composed: > Greetings All: > > Is it possible to add a line above that name server entries in the > resolv.conf file that will tell the system to check the hosts file for > a resolution before querying the dns server(s)? That is normally done in /etc/nsswitch.conf -- Bill Schoolcraft PO Box 210076 San Francisco,CA 94121 http://billschoolcraft.com "We can find no wealth above a healthy body and a happy heart." ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Unable to create the partition. Too big?
On 11/18/04 03:46 PM, Nathan Kinkade sat at the `puter and typed: > On Thu, Nov 18, 2004 at 10:28:26PM +0100, David E. Meier wrote: > > Hi folks, > > > > I am trying to custom partition my 73GB SCSI hard drive using 5.3. When I > > first create the partions using the Auto Default option I get the > > following table: > > > > amrd0s1a /256MB UFS2 Y > > amrd0s1b swap2022MB SWAP > > amrd0s1d /tmp 256MB UFS2+S Y > > amrd0s1e /var 256MB UFS2+S Y > > amrd0s1g /usr 67085MB UFS2+S Y > > > > OK, so far so good but I want bigger /, /tmp and /var partitions. So I > > deleted them and recreated them to the following: > > > > amrd0s1b swap2022MB SWAP > > amrd0s1a /512MB UFS2 Y > > amrd0s1d /tmp 512MB UFS2+S Y > > amrd0s1e /var1024MB UFS2+S Y > > > > Now, I just cannot create the /usr partition. If fails with: "Unable to > > create the partition. Too big?" Although the top line tells me there is > > 65805MB left which is less than the auto created partition... > > > > Bug or am I missing here something? Thanks. Dave > > This isn't an answer to your question, but I have witnessed this > behvior in the past, probably as far back 4.8. The only way I was ever > able to get around it was to manually partition the whole thing. > Modifying the auto-created partitions never seemed to work, and I got > the same errors as you. Fortunately, it's fairly easy to designate 5 or > 6 partitions manually. I don't know, but I would suspect that this is > some type of bug or limitation in the program. I hope somebody else has > a better answer. > > Nathan > -- > PGP Public Key: pgp.mit.edu:11371/pks/lookup?op=get&search=0xD8527E49 I came in a little late here, but did you delete and recreate all the partitions, including the swap? Try deleting everything, THEN creat your /, swap, /tmp, /var, and /usr in that order - just use the remaining space for your /usr/partition and see how big it comes out. It should be in the 65800MB range. Also, when you specify the size of a partition like the swap, use the GB unit (2G). I don't remember the details of why this might be better, but I've not had any problems creating partitions in excess of 65G. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ well-adjusted, adj.: The ability to play bridge or golf as if they were games. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
Peter Risdon wrote: Ed Budd wrote: Oops that should have read: make installworld KERNCONF=MYKERNEL This is the second time I've seen this in this thread. Is the KERNCONF argument meaningful with a make installworld? Peter. lol, no. I shouldn't bother responding to posts when I'm busy doing a hundred other things at once! Sorry for the confusion. If anyone is looking for me I'll be in my corner... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Unable to create the partition. Too big?
Yep, that did work. I did not delete the swap partition before. After deleting all of the partitions I was able to create the table as intended. However, I've installed FreeBSD in a similar way a couple of times before and never seen this happen. Does anyone know the reason for it? Dave. > On Thu, Nov 18, 2004 at 10:28:26PM +0100, David E. Meier wrote: >> Hi folks, >> >> I am trying to custom partition my 73GB SCSI hard drive using 5.3. When >> I >> first create the partions using the Auto Default option I get the >> following table: >> >> amrd0s1a /256MB UFS2 Y >> amrd0s1b swap2022MB SWAP >> amrd0s1d /tmp 256MB UFS2+S Y >> amrd0s1e /var 256MB UFS2+S Y >> amrd0s1g /usr 67085MB UFS2+S Y >> >> OK, so far so good but I want bigger /, /tmp and /var partitions. So I >> deleted them and recreated them to the following: >> >> amrd0s1b swap2022MB SWAP >> amrd0s1a /512MB UFS2 Y >> amrd0s1d /tmp 512MB UFS2+S Y >> amrd0s1e /var1024MB UFS2+S Y >> >> Now, I just cannot create the /usr partition. If fails with: "Unable to >> create the partition. Too big?" Although the top line tells me there is >> 65805MB left which is less than the auto created partition... >> >> Bug or am I missing here something? Thanks. Dave > > This isn't an answer to your question, but I have witnessed this > behvior in the past, probably as far back 4.8. The only way I was ever > able to get around it was to manually partition the whole thing. > Modifying the auto-created partitions never seemed to work, and I got > the same errors as you. Fortunately, it's fairly easy to designate 5 or > 6 partitions manually. I don't know, but I would suspect that this is > some type of bug or limitation in the program. I hope somebody else has > a better answer. > > Nathan > -- > PGP Public Key: pgp.mit.edu:11371/pks/lookup?op=get&search=0xD8527E49 > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Unable to create the partition. Too big?
On Thu, Nov 18, 2004 at 10:28:26PM +0100, David E. Meier wrote: > Hi folks, > > I am trying to custom partition my 73GB SCSI hard drive using 5.3. When I > first create the partions using the Auto Default option I get the > following table: > > amrd0s1a /256MB UFS2 Y > amrd0s1b swap2022MB SWAP > amrd0s1d /tmp 256MB UFS2+S Y > amrd0s1e /var 256MB UFS2+S Y > amrd0s1g /usr 67085MB UFS2+S Y > > OK, so far so good but I want bigger /, /tmp and /var partitions. So I > deleted them and recreated them to the following: > > amrd0s1b swap2022MB SWAP > amrd0s1a /512MB UFS2 Y > amrd0s1d /tmp 512MB UFS2+S Y > amrd0s1e /var1024MB UFS2+S Y > > Now, I just cannot create the /usr partition. If fails with: "Unable to > create the partition. Too big?" Although the top line tells me there is > 65805MB left which is less than the auto created partition... > > Bug or am I missing here something? Thanks. Dave This isn't an answer to your question, but I have witnessed this behvior in the past, probably as far back 4.8. The only way I was ever able to get around it was to manually partition the whole thing. Modifying the auto-created partitions never seemed to work, and I got the same errors as you. Fortunately, it's fairly easy to designate 5 or 6 partitions manually. I don't know, but I would suspect that this is some type of bug or limitation in the program. I hope somebody else has a better answer. Nathan -- PGP Public Key: pgp.mit.edu:11371/pks/lookup?op=get&search=0xD8527E49 pgpySupV2uLY2.pgp Description: PGP signature
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
Ed Budd wrote: Oops that should have read: make installworld KERNCONF=MYKERNEL This is the second time I've seen this in this thread. Is the KERNCONF argument meaningful with a make installworld? Peter. -- the circle squared network systems and software http://www.circlesquared.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Unable to create the partition. Too big?
Hi folks, I am trying to custom partition my 73GB SCSI hard drive using 5.3. When I first create the partions using the Auto Default option I get the following table: amrd0s1a /256MB UFS2 Y amrd0s1b swap2022MB SWAP amrd0s1d /tmp 256MB UFS2+S Y amrd0s1e /var 256MB UFS2+S Y amrd0s1g /usr 67085MB UFS2+S Y OK, so far so good but I want bigger /, /tmp and /var partitions. So I deleted them and recreated them to the following: amrd0s1b swap2022MB SWAP amrd0s1a /512MB UFS2 Y amrd0s1d /tmp 512MB UFS2+S Y amrd0s1e /var1024MB UFS2+S Y Now, I just cannot create the /usr partition. If fails with: "Unable to create the partition. Too big?" Although the top line tells me there is 65805MB left which is less than the auto created partition... Bug or am I missing here something? Thanks. Dave ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
Ed Budd wrote: Curtis Vaughan wrote: o update from cvs # cd /usr/src # make update o build world/kernel in your normal or single-user mode # cd /usr/obj # rm -rf * # cd /usr/src # make buildworld # make buildkernel KERNCONF=YOURKERNEL o install kernel/world in single user mode # reboot [ Choose single User Mode ] # cd /usr/src # make installkernel KERNCONF=YOURKERNEL # make installworld o run mergemaster -p # mergemaster -p o reboot # reboot It's fairly straight-forward once you get the gist :) Following Adam's suggestion, I have now gotten to the point where I rebooted into Single-User Mode, entered the /usr/src directory and then entered the command: make installkernel KERNCONF=MYKERNEL But it almost immediately comes back with errors about the fact that certain directories don't exist and problems with the fact that the file system is read only. Perhaps I entered Single User Mode wrong? On a reboot, I chose not to boot into any system, but to go directly to the loader prompt (something like that). Then I entered the command: boot -s Curtis ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Did you remember to mount the partitions after logging in single-user mode? mount -a cd /usr/src make installkernel KERNCONF=MYKERNEL ___ Oops that should have read: make installworld KERNCONF=MYKERNEL Sorry... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
Curtis Vaughan wrote: o update from cvs # cd /usr/src # make update o build world/kernel in your normal or single-user mode # cd /usr/obj # rm -rf * # cd /usr/src # make buildworld # make buildkernel KERNCONF=YOURKERNEL o install kernel/world in single user mode # reboot [ Choose single User Mode ] # cd /usr/src # make installkernel KERNCONF=YOURKERNEL # make installworld o run mergemaster -p # mergemaster -p o reboot # reboot It's fairly straight-forward once you get the gist :) Following Adam's suggestion, I have now gotten to the point where I rebooted into Single-User Mode, entered the /usr/src directory and then entered the command: make installkernel KERNCONF=MYKERNEL But it almost immediately comes back with errors about the fact that certain directories don't exist and problems with the fact that the file system is read only. Perhaps I entered Single User Mode wrong? On a reboot, I chose not to boot into any system, but to go directly to the loader prompt (something like that). Then I entered the command: boot -s Curtis ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Did you remember to mount the partitions after logging in single-user mode? mount -a cd /usr/src make installkernel KERNCONF=MYKERNEL ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FW: FreeBSD donation (sponsorship)
On Thu, Nov 18, 2004 at 09:18:21AM -0800, Crystal Chiang wrote: > I don't really understand how the FreeBSD organization works, it seems like > my e-mail was replied by an amount of people that's not part of this > organization. If you don't represent FreeBSD, I will not respond from this > point on. Your email was sent to a global, public mailing list, which is why you got responses from random FreeBSD users around the world. Also, I'm not sure that you realise that FreeBSD.org is a volunteer project; as such it doesn't have a formal PR or marketing department. You mentioned specifically about offering to "sponsor" freebsd.org's website, but I'm not sure what you mean by that - do you just mean hosting the website, or something else? We're not in need of hosting for www.freebsd.org itself, although you could for example host a own mirror of it, which is always welcome. Kris pgp08FK9S4EIH.pgp Description: PGP signature
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
o update from cvs # cd /usr/src # make update o build world/kernel in your normal or single-user mode # cd /usr/obj # rm -rf * # cd /usr/src # make buildworld # make buildkernel KERNCONF=YOURKERNEL o install kernel/world in single user mode # reboot [ Choose single User Mode ] # cd /usr/src # make installkernel KERNCONF=YOURKERNEL # make installworld o run mergemaster -p # mergemaster -p o reboot # reboot It's fairly straight-forward once you get the gist :) Following Adam's suggestion, I have now gotten to the point where I rebooted into Single-User Mode, entered the /usr/src directory and then entered the command: make installkernel KERNCONF=MYKERNEL But it almost immediately comes back with errors about the fact that certain directories don't exist and problems with the fact that the file system is read only. Perhaps I entered Single User Mode wrong? On a reboot, I chose not to boot into any system, but to go directly to the loader prompt (something like that). Then I entered the command: boot -s Curtis ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: PCMCIA Wireless Card Question
Andrew L. Gould wrote: > I find the thought of being curious and fascinated until the day I die > quite comforting -- a satisfaction that a completed quest could never > provide. Well Said! > "Use FreeBSD and die happy." !? > That's the plan ;-) Thanks again, Tom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Odd 'sudo' behavior with FreeBSD 4.10
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello: I've been able to replicate this on two separate machines, one with a clean install of 4.10 and one with an in-production upgrade from 4.7 to 4.10. In both cases it appears that using the 'sudo' command for any purpose, including downloading of files, moving of files, adding of users, etc. will sometimes fail due to the incorrect application of the UID and GID. As an example, I 'sudo wget http://whatever' and 'sudo tar -zxvf' the file and it will show up with a numeric UID/GID that doesn't match anything in the password file. If I 'su root' and do the same commands, everything works fine. Has anyone seen this and, if so, do you know of a workaround or fix? Thanks, Mike - -- Michael K. SmithNoaNet 206.219.7116 (work) 866.662.6380 (NOC) [EMAIL PROTECTED] http://www.noanet.net -BEGIN PGP SIGNATURE- Version: PGP 8.0.3 iQA/AwUBQZ0PZZzgx7Y34AxGEQJ7BACgnsW9ejT6VwGpN5LWZ5X2z2dk1J0An3E4 H310czaz4YI2yB5FiXxkoq7C =NNyd -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: PCMCIA Wireless Card Question
On Thursday 18 November 2004 01:28 pm, Tom Connolly wrote: > > Thanks a ton Andrew. This is very good information. I also > appreciate you taking the time to explain it to me in very simple > terms. Like I said, I'm a complete newbie and I need things > explained to me like I was 2 years old. I now have enough confidence > to continue. > > Regards, > Tom No problem. I'm an eternal newbie, myself. Each lesson leads to more lessons in different areas. I find the thought of being curious and fascinated until the day I die quite comforting -- a satisfaction that a completed quest could never provide. "Use FreeBSD and die happy." !? ;-) Andrew Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
Brian Henning wrote: Greetings All: Is it possible to add a line above that name server entries in the resolv.conf file that will tell the system to check the hosts file for a resolution before querying the dns server(s)? Thanks, Brian # man nsswitch.conf KDK ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
Brian Henning wrote: Greetings All: Is it possible to add a line above that name server entries in the resolv.conf file that will tell the system to check the hosts file for a resolution before querying the dns server(s)? Thanks, Depending on your version of freebsd, nsswitch.conf will have: hosts: files dns If you don't have /etc/nsswitch.conf ...I don't know how it was done before that was introduced/brought back. -Charlie ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: resolv.conf - hosts
On 11/18/04 02:43 PM, Brian Henning sat at the `puter and typed: > Greetings All: > > Is it possible to add a line above that name server entries in the > resolv.conf file that will tell the system to check the hosts file for > a resolution before querying the dns server(s)? > > Thanks, > > Brian That would be the /etc/host.conf file. Standard 5.3 version goes like this: # $FreeBSD: src/etc/host.conf,v 1.6 1999/08/27 23:23:41 peter Exp $ # First try the /etc/hosts file hosts # Now try the nameserver next. bind # If you have YP/NIS configured, uncomment the next line # nis So it will do that automagically anyway. If yours looks different than this, that would probably be why you're not getting the host lookup. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ furbling, v.: Having to wander through a maze of ropes at an airport or bank even when you are the only person in line. -- Rich Hall, "Sniglets" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
resolv.conf - hosts
Greetings All: Is it possible to add a line above that name server entries in the resolv.conf file that will tell the system to check the hosts file for a resolution before querying the dns server(s)? Thanks, Brian ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: postfix launch at system startup
On 11/18/04 08:33 PM, Kjell Midtseter sat at the `puter and typed: > On Thursday, 18 November 2004 at 10:08:51 -0600, Andrew L. Gould wrote: > > On Thursday 18 November 2004 09:46 am, Louis LeBlanc wrote: > > > On 11/18/04 03:31 PM, Kjell Midtseter sat at the `puter and typed: > > > > When I later went through a cvsup/portupgrade sequence, I had to > > > > answer "YES" to the question > > > > "Would you like to activate Postfix in /etc/mail/mailer.conf [n]?" > > > > If you answer "No" you will revert to sendmail. > > > > Kjell > > > > > > I answered yes. Always do. > > > > > > Lou > > > > Answering yes results in changes /etc/mail/mailer.conf so that calls to > > certain email executables will be mapped to postfix rather than > > sendmail. I am (fairly) certain that it does _not_ make the necessary > > changes to ensure that: > > > > 1) sendmail is not started at bootup > > 2) postfix is started at bootup > > 3) sendmail is not compiled during the next "make buildworld" > > I agree. But according to this part that has been 'snipper out' > > At install, I specified postfix as the mta, and had it configured in > > /etc/mail/mailer.conf. The /stand/sysinstall shell also added the > > following to /etc/rc.conf: > The three points should have been taken care of then > Kjell The following is from /usr/ports/mail/postfix/pkg-message: If you have postfix configured in your /etc/mail/mailer.conf (answered yes to the previous question) and would like to enable postfix to start at boot time, please set these variables in your /etc/rc.conf file: sendmail_enable="YES" sendmail_flags="-bd" sendmail_pidfile="/var/spool/postfix/pid/master.pid" sendmail_outbound_enable="NO" sendmail_submit_enable="NO" sendmail_msp_queue_enable="NO" This will disable Sendmail completely. Alternatively to the above settings, you can enable postfix to start with the other local services, for example, after your database server starts if you need it to be running for postfix. To do this, set in your rc.conf file: sendmail_enable="NONE" Then make the following symbolic link: cd /usr/local/etc/rc.d ln -s /usr/local/sbin/postfix postfix.sh Now, when I installed postfix at boot, it implemented the first version, including the periodic.conf changes not included in this snippet. The startup did not go as planned. I don't know why, I haven't studied the system startup process in 5.3. I was told by someone with much more experience with postfix that the second option is much more reliable, and should be preferred over the first. It certainly works in my case, but as always, YMMV. One thing of note, I did rebuild world without the noted make.conf entry, so maybe that overwrote the previously working postfix wrapper links with working sendmail stuff? Who knows? Either way, I have it working now. Thanks all. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Satellite Safety Tip #14: If you see a bright streak in the sky coming at you, duck. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 4.4bsd question
Karim Ali wrote: Hello there, I would like to know which is the latest version of the "4.4BSD-lite" Kernel and also could you send me a copy (preferably the one which FreeBSD ships with)?? please email it to [EMAIL PROTECTED] , as such i found one online but it was modded quite a bit and I couldnt figure out the one which comes with FreeBSD 4.7, (Sorry i'm not all that bright so not having documentation about the kernel really gives me nightmares), also if you could direct me to the documentation, and also if you could direct me to where I could go about getting information on the development of drivers for the kernel (in specific for WiFi 802.11b/g Lan cards, although i'm not to sure about the availability of such a document). Anyways any help would greatly be appreciated. Thanks in advance, Karim F. Ali Devign Labs Hi, Karim: I had a rather lengthy reply composed, but lost it. 4.4-BSD-lite was a seperate operating system that is over ten years old; sources from it were imported into FreeBSD 2.0 about 10 1/2 years ago; it's part of FreeBSD's rather dignified pedigree now Your best bet for obtaining the code would be via CVS or the CVS web interface, perhaps. As a matter of fact, with CVS you could recreate a FreeBSD 2.0 system if you so desired. However, you express an interest in writing wireless device drivers, so I think your interest would really be in the current kernel, instead of the old one. You might want to read the "hackers@" email list, the Developer's Handbook for documentation (link on the left at www.freebsd.org), and generally just get familiar with the Project (use it, close some PR's, etc??) in order to find out more from those who are closest to kernel development. As a matter of fact, maybe [EMAIL PROTECTED] is a list you'd want to look into. Certainly someone on arch- or hackers- would be better qualified to give an answer, and might have a better clue as to documentation. There are a number of lists that may have more "kernel developer" types on them; just keep in mind that they are busy folks, and be sure and do you homework before asking a question that is easily answered with Google, or common sense HTH, Kevin Kinsey ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
Curtis Vaughan wrote: On 18 Nov, 2004, at 12:12, Curtis Vaughan wrote: So basically: o update from cvs # cd /usr/src # make update o build world/kernel in your normal or single-user mode # cd /usr/obj # rm -rf * # cd /usr/src # make buildworld # make buildkernel KERNCONF=YOURKERNEL Adam! Sorry to bother you again, but I got as for as make buildworld, after which I typed "make buildkernel KERNCONF=MYKERNEL" and I got: cod# make buildkernel KERNCONF=MYKERNEL ERROR: Missing kernel configuration file(s) (MYKERNEL). false *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas why? Curtis Maybe you can disregard that. Looking at "The Complete FreeBSD" I see that you can just use GENERIC, if you want. So, I typed: make buildworld KERNCONF=GENERIC and off it went. Any reason why I wouldn't want to use GENERIC? I haven't compiled anything special for my kernel. It's worth reading: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html But basically, if you want to use the GENERIC kernel, just type: #make buildkernel The KERNCONF thingy is only necessary if you want to use a custom kernel and, as you've discovered, this won't work unless you have first generated a custom kernel configuration file, while is normally done by: #cd /usr/src/sys/i386/conf #cp GENERIC MYKERNELNAME #vi MYKERNELNAME Then add/delete as appropriate and when you run make buildkernel add KERNCONF=MYKERNELNAME It helps, in the long run, to give your kernel a meaningful name. Regards, Peter. -- the circle squared network systems and software http://www.circlesquared.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
This will be the end of the issue.
Dear all, Thank you for all your responses to my original e-mail regarding the sponsorship for FreeBSD. I will try to find the appropriate people to talk to regarding this issue. And from now on, I will put a stop with all other responses. Thank you and have a nice day. Crystal Chiang Multimedia | Marketing E: [EMAIL PROTECTED] T: 604.688.8946 ext: 127 F: 604.688.8934 - www.netnation.com www.domainpeople.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
Maybe you can disregard that. Looking at "The Complete FreeBSD" I see that you can just use GENERIC, if you want. So, I typed: make buildworld KERNCONF=GENERIC and off it went. Any reason why I wouldn't want to use GENERIC? I haven't compiled anything special for my kernel. On 18 Nov, 2004, at 12:12, Curtis Vaughan wrote: So basically: o update from cvs # cd /usr/src # make update o build world/kernel in your normal or single-user mode # cd /usr/obj # rm -rf * # cd /usr/src # make buildworld # make buildkernel KERNCONF=YOURKERNEL Adam! Sorry to bother you again, but I got as for as make buildworld, after which I typed "make buildkernel KERNCONF=MYKERNEL" and I got: cod# make buildkernel KERNCONF=MYKERNEL ERROR: Missing kernel configuration file(s) (MYKERNEL). false *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas why? Curtis o install kernel/world in single user mode # reboot [ Choose single User Mode ] # cd /usr/src # make installkernel KERNCONF=YOURKERNEL # make installworld o run mergemaster -p # mergemaster -p o reboot # reboot It's fairly straight-forward once you get the gist :) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
So basically: o update from cvs # cd /usr/src # make update o build world/kernel in your normal or single-user mode # cd /usr/obj # rm -rf * # cd /usr/src # make buildworld # make buildkernel KERNCONF=YOURKERNEL Adam! Sorry to bother you again, but I got as for as make buildworld, after which I typed "make buildkernel KERNCONF=MYKERNEL" and I got: cod# make buildkernel KERNCONF=MYKERNEL ERROR: Missing kernel configuration file(s) (MYKERNEL). false *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas why? Curtis o install kernel/world in single user mode # reboot [ Choose single User Mode ] # cd /usr/src # make installkernel KERNCONF=YOURKERNEL # make installworld o run mergemaster -p # mergemaster -p o reboot # reboot It's fairly straight-forward once you get the gist :) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
quotas on 5.3
Hello, Got a question on quotas. I've enabled them on /usr and /var filesystems by adding the userquota option to their options in fstab. This is after i recompiled my kernel with the QUOTA option in it and rebooted. I then added: enable_quotas="YES" check_quotas="NO" to /etc/rc.conf and again rebooted. According to the handbook quota files should be created automatically i don't have to touch any zero-length quota files. When the system came back up i checked /usr and /var for quota user files, i did not see them. Boot up messages indicate quota on /usr but again no quota file. Is this normal? Did i miss something? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: best way to to a direct copy of audio cd
In the last episode (Nov 18), Dan Finn said: > I would like to be able to use dd to grab a full, single iso image of > an audio cd and then use cdrecord to burn that. I know I can do this > under linux but for some reason I can't get it to work under fbsd. Audio cds aren't filesystems, so the term "iso image" isn't quite right. The cdrecord manpage suggests this: To copy an audio CD in the most accurate way, first run cdda2wav dev=2,0 -vall cddb=0 -B -Owav and then run cdrecord dev=2,0 -v -dao -useinfo -text *.wav This will try to copy track indices and to read CD-Text information from disk. If there is no CD-Text information, cdda2wav will try to get the information from freedb.org instead. -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
best way to to a direct copy of audio cd
I would like to be able to use dd to grab a full, single iso image of an audio cd and then use cdrecord to burn that. I know I can do this under linux but for some reason I can't get it to work under fbsd. I am trying to grab the entire audio cd image using the following: dd if=/dev/acd0 conv=swab bs=2352 of=audio_cd.iso I have an ide cd but I've also set it up so that I can access it as if it's a scsi cdrom using /dev/cd0. However when I run the above command with /dev/cd0 I get the following error: dd: /dev/cd0: Invalid argument So the above command using dd and /dev/acd0 seems to work, it grabs what seems like the entire image off the audio cd. I then attempt to burn it using the following command: cdrecord -v -data audio_cd.iso And I get the following errors from that command: Track 01: 718 of 740 MB written (fifo 100%) [buf 99%] 4.2x.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 05 9C E6 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.077s timeout 40s write track data: error after 753348608 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 1249.053s Average write speed 4.1x. Min drive buffer fill was 99% Fixating... Fixating time: 61.978s cdrecord: fifo had 11930 puts and 11867 gets. cdrecord: fifo was 0 times empty and 11848 times full, min fill was 92%. and the following errors from my messages file: Nov 17 16:36:19 stewie kernel: acd0: FAILURE - READ_SUBCHANNEL status=51 sensekey=ILLEGAL REQUEST error=4 about one every couple of seconds. If I burn it with cdrecord as audio and use the -swab option it works and plays. But the problem I have with that is that it records it all as one song. Is there a way to do what I am trying to do under freebsd? Thanks Dan What am I doing wrong here? All I want ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: postfix launch at system startup
On Thursday, 18 November 2004 at 10:08:51 -0600, Andrew L. Gould wrote: > On Thursday 18 November 2004 09:46 am, Louis LeBlanc wrote: > > On 11/18/04 03:31 PM, Kjell Midtseter sat at the `puter and typed: > > > When I later went through a cvsup/portupgrade sequence, I had to > > > answer "YES" to the question > > > "Would you like to activate Postfix in /etc/mail/mailer.conf [n]?" > > > If you answer "No" you will revert to sendmail. > > > Kjell > > > > I answered yes. Always do. > > > > Lou > > Answering yes results in changes /etc/mail/mailer.conf so that calls to > certain email executables will be mapped to postfix rather than > sendmail. I am (fairly) certain that it does _not_ make the necessary > changes to ensure that: > > 1) sendmail is not started at bootup > 2) postfix is started at bootup > 3) sendmail is not compiled during the next "make buildworld" I agree. But according to this part that has been 'snipper out' > At install, I specified postfix as the mta, and had it configured in > /etc/mail/mailer.conf. The /stand/sysinstall shell also added the > following to /etc/rc.conf: The three points should have been taken care of then Kjell > Andrew Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Req: Good virtual mail server howto
Hello Chris, On Thu, Nov 18, 2004 at 07:07:40PM + or thereabouts, Chris Smith wrote: > > Has anyone got any good resources for configuring a virtual pop3/imap > server under FreeBSD 5.x? I need to host mail for more than one domain > and do not wish to give users system accounts. Go for http://high5.net/howto/, where you can find decent mail solution. Cheers, Martin -- martin hudec * 421 907 303 393 * [EMAIL PROTECTED] * http://www.aeternal.net "Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws." Douglas Adams, "The Hitchhiker's Guide to the Galaxy" pgp20aTUJpKna.pgp Description: PGP signature
RE: PCMCIA Wireless Card Question
Andrew L. Gould wrote: > On Thursday 18 November 2004 12:42 pm, Tom Connolly wrote: >> Andrew L. Gould wrote: >>> On Tuesday 16 November 2004 12:30 pm, Tom Connolly wrote: Hello List, I have just put FreeBSD 5.3 Release on my Dell Latitude C600 laptop. I wish to go wireless but I'm new to this technology. I have looked through the hardware compatibility notes and have found several supported wireless cards. My question is, what do I have to do (ports to install, configuration, etc.) to get the wireless connection up and running. Any help would be appreciated. Thanks, Tom >>> >>> Based on your email, I will assume that you purchased a compatible >>> wireless adapter. >>> >>> 1. Make sure your pccard slots work in FreeBSD 5.3. There's no use >>> in struggling with the pccard if the slots don't work. >>> >>> http://www.freebsd.org/doc/en_US.ISO8859-1/articles/laptop/x58.html >>> >>> >>> 2. Make sure your kernel is configured for your hardware. You may >>> have to add devices to your kernel: >> >> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfi >> g.h tml >> >>> 3. Configure your wireless connection: >> >> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wir >> ele ss.html >> >>> Have fun, >>> >>> Andrew Gould >> >> Oops, I guess I missed the top line in the Handbook that I can skip >> making device nodes since I am using FreeBSD 5.3. I assume I still >> have to add the entry for the kernel though. Is that correct? Then >> I assume I have to recompile the kernel which I have never done >> before. Is this also correct? Sorry for the remedial questions. I >> as still a newbie. >> >> Tom > > For the atheros chipset, you'll need to add the following to your > kernel > config file: > > device ath > device ath_hal > > Since this is your first time recompiling a kernel, you might consider > the following advice: > > 1. Start with a copy of GENERIC. Since you're currently running it, > you > know it works. > > 2. Put additions at the bottom of the file so that you can find them > easily. > > 3. When you comment out unused options or devices, comment them out > with > a combination of characters so that you can find/reverse your changes > easily. For example, rather than simply add a '#' to the front of a > line, you could add 2 #'s and your initials (in my case, that would be > '##ag'). > > Good luck, > > Andrew Gould > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions To > unsubscribe, send any mail to > "[EMAIL PROTECTED]" Thanks a ton Andrew. This is very good information. I also appreciate you taking the time to explain it to me in very simple terms. Like I said, I'm a complete newbie and I need things explained to me like I was 2 years old. I now have enough confidence to continue. Regards, Tom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Current Release level
On Thursday 18 November 2004 08:25 am, Jamie Ostrowski wrote: >Does anyone know where the current patchlevel for FreeBSD Release is > posted? By this, I mean, I know that Release was just recently incremented > from 4.10-RELEASE-p3 to 4.10-RELEASE-p4 due to the fetch.c security > advisory. (I am assuming that the 'p' stands for patchlevel or something > similiar). But what if I had missed the announcement, or perhaps > there are other modifications not security related. Where do I go to find > out what the current "patchlevel" is for the RELEASE branch? I would look at /usr/src/sys/conf/newvers.sh I think that BRANCH is what you are looking for. Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: PCMCIA Wireless Card Question
On Thursday 18 November 2004 12:42 pm, Tom Connolly wrote: > Andrew L. Gould wrote: > > On Tuesday 16 November 2004 12:30 pm, Tom Connolly wrote: > >> Hello List, > >> I have just put FreeBSD 5.3 Release on my Dell Latitude C600 > >> laptop. I wish to go wireless but I'm new to this technology. I > >> have looked through the hardware compatibility notes and have > >> found several supported wireless cards. My question is, what do I > >> have to do (ports to install, configuration, etc.) to get the > >> wireless connection up and running. > >> > >> Any help would be appreciated. > >> > >> Thanks, > >> > >> Tom > > > > Based on your email, I will assume that you purchased a compatible > > wireless adapter. > > > > 1. Make sure your pccard slots work in FreeBSD 5.3. There's no use > > in struggling with the pccard if the slots don't work. > > > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/laptop/x58.html > > > > > > 2. Make sure your kernel is configured for your hardware. You may > > have to add devices to your kernel: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfi >g.h tml > > > 3. Configure your wireless connection: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wir >ele ss.html > > > Have fun, > > > > Andrew Gould > > Oops, I guess I missed the top line in the Handbook that I can skip > making device nodes since I am using FreeBSD 5.3. I assume I still > have to add the entry for the kernel though. Is that correct? Then > I assume I have to recompile the kernel which I have never done > before. Is this also correct? Sorry for the remedial questions. I > as still a newbie. > > Tom For the atheros chipset, you'll need to add the following to your kernel config file: device ath device ath_hal Since this is your first time recompiling a kernel, you might consider the following advice: 1. Start with a copy of GENERIC. Since you're currently running it, you know it works. 2. Put additions at the bottom of the file so that you can find them easily. 3. When you comment out unused options or devices, comment them out with a combination of characters so that you can find/reverse your changes easily. For example, rather than simply add a '#' to the front of a line, you could add 2 #'s and your initials (in my case, that would be '##ag'). Good luck, Andrew Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: BSD equivalents of autoconf, automake, etc.
On Thu, Nov 18, 2004 at 06:51:06PM +0100, Matthias Buelow wrote: : Jonathon McKitrick wrote: : : >This is exactly what I needed. I wanted to experiment with building, : >installing, linking, and the same with my own test 'libraries.' It looks : >like this is much easier than autoconf. : : Why do you want to use autoconf at all, if you want to build on only one : system? Autoconf (and automake/libtool) was, as originally intended, : designed to ease cross-platform portability. Well, I might want to make my project available, I'm not sure. But either way, anything that makes makefiles easier is a welcome tool. jm -- My other computer is your Windows box. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FW: FreeBSD donation (sponsorship)
-Original Message- From: Crystal Chiang [mailto:[EMAIL PROTECTED] Sent: Friday, November 12, 2004 1:47 PM To: [EMAIL PROTECTED] Subject: FreeBSD donation (sponsorship) Hi FreeBSD, My name is Crystal Chiang, I am contacting you on behalf of NetNation Communications Inc. regarding the sponsorship / partnership with FreeBSD. NetNation is a Hosting Solution Provider and we have been in the hosting industry since 1997. If you are not familiar with our company, you could check out our Web site for more information. http://www.netnation.com/company/index.php I am not sure if you do sponsorship/partnership with any other organizations, I am interested in sponsoring the FreeBSD.org web site, if someone from your organization could get back to me with some information would be much appreciated. I could be reached at this e-mail address, or by phone tollfree: 1.888.277.000. Take care and have a nice day. Crystal Chiang Multimedia | Marketing [ snip message regarding the OP's company ] [ snip message regarding other links, which were appropriate IMO ] [ snip message regarding the snipped message regarding the OP's company and in particular the fact of their server's OS ] [ snip Crystal's next message, to questions@, which mentioned the above-quoted message and asked for it to be forwarded ... ] At Thu, 18 Nov 2004 it looks like Crystal Chiang composed: I don't really understand how the FreeBSD organization works, it seems like my e-mail was replied by an amount of people that's not part of this organization. If you don't represent FreeBSD, I will not respond from this point on. Bill wrote: Crystal, I would like to thank you for your kind offer and I truly hope that someone from the FreeBSD "organization" actually does respond to you. As for all the computer mailing lists I belong to, there are very advanced users who have been into computing for over 20 years and there are people who are still looking forward to shaving for the first time or getting their first drivers license. With all that said, we all group together and normally rally around the topic of computer problems and how to fix them. I truly hope you don't judge us on a few inappropriate posts. What your offering to us is a very valuable service and I'm truly touched by your generosity. Namaste It is certainly difficult to determine, based on the original email, exactly what Crystal meant; but, he/she probably didn't intend to make it entirely clear. It seems obvious that he/she (generally in the U.S. a "Crystal" is female, please forgive my continued non-gender-specific terminology) was only asking, more or less, "where does the buck stop" or "who's the boss?" Exactly what else he/she has in mind was probably irrelevant to us, as it was intended to be read by someone else anyway. Those "someone elses" can be responsible for handling the request and determining how to respond to Crystal's offer. Crystal, please understand that the "freebsd-questions" address is really a list of individuals who answer questions regarding, most generally, the *use* of FreeBSD. Now, on this list, we occasionally get requests from questionable individuals who want a link on the Project's index page or elsewhere on the site, or who wish to advertise on the site, etc., etc. This is against the Project's policy, and it's possible that these people get an occasional rude reply or "brush off", particularly if their post somehow offends the sensibilities of a reader. Please also understand that the Project itself is a rather loosely connected group of individuals, and it's sometimes difficult to say who the boss is, as there isn't just one. Martin Hepworth's reply in this thread contained some helpful links. I would also recommend that Crystal look at http://www.freebsdfoundation.org/, the home of the FreeBSD Foundation, who can certainly speak authoritatively for the Project at large in most instances. You can contact them by email at [EMAIL PROTECTED] if you wish; at your request I have forwarded your original email to them already today. They could and would be most certainly happy to help you, Crystal, and your company if indeed it is your desire to follow in the footsteps of such esteemed companies as Yahoo! and Pair Networks (and others) in corporate sponsorship of and/or assistance to the FreeBSD Project. I'm sure you can get the answers you would need from them. Kevin D. Kinsey* DaleCo, S.P. *Member of FreeBSD Advocacy, adjunct member of the FDP, and dedicated to the proposition that all O.S. projects are not exactly created equal** ... so, do I speak for FreeBSD? Sort of; at least, I'm speaking truth, which the Project recognizes as a Good Thing(tm) when it's possible to discern it ** though they are endowed by their creators with many indistinguishable characteristics ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail
pf/altq prioritisation (for ssh).
Hi, I want to use pf/altq to give ssh a high priority so I don't get lagged down when something is downloading. I have: altq on ath0 priq queue { default, ssh } queue default priq(default) queue ssh priority 15 priq(red) I'm pretty sure this ``works'' but I was really hoping for more. Without the 5.3 miniinst ISO downloading a SSH connection is perfect (no lag, just like the local machine) but as soon as I set it going it becomes a bit laggy. Am I expecting too much to have a lag-free SSH connection while downloading something at the same time? Any other alternatives? -lewiz. -- I was so much older then, I'm younger than that now. --Bob Dylan, 1964. -| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org |- pgp5Qxz8hKylx.pgp Description: PGP signature
Req: Good virtual mail server howto
Hi, Has anyone got any good resources for configuring a virtual pop3/imap server under FreeBSD 5.x? I need to host mail for more than one domain and do not wish to give users system accounts. Cheers, Chris Smith http://www.ninjalabs.co.uk/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: IRC recommendation?
Xchat has always been one of my favorites: http://www.xchat.org Works on both *nix and Windows. Licensed under GPL. On Wed, 17 Nov 2004 08:07:29 +0530, Subhro <[EMAIL PROTECTED]> wrote: > Hi, > > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Marty Landman > Sent: Wednesday, November 17, 2004 6:31 > To: [EMAIL PROTECTED] > Subject: IRC recommendation? > > I'm looking for a free chat application that will work for my office > network. Have 'nix and windoz machines running. > > There are many such clients available. You cn either try something like > Jabber or you can set up an IRCD like Unreal or Dancer. > > Indian Institute of Information Technology > Subhro Sankha Kar > Block AQ-13/1, Sector V > Salt Lake City > PIN 700091 > India > > > -- Just my $.02, your mileage may vary, batteries not included, etc ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: sil3112a SATA Controller, current status
Hi, > I've been trying to install FreeBSD on my system that has an onboard > Silicon Image sil3112a SATA controller and a Western Digital Raptor > WD740 74GB HD, for a few months now, with no luck. Pain. > First I tried 5.2.1, which installs fine but starts to spew DMA > timeout messages when put under any kind of HD related stress and > eventually the system becomes totally unusable. > I tried a second time with 5.3-BETA7, the behaviour was exactly the same. Just to help things along, I have a SIL3112 controller on my workstation (Asus A7n8x-e platform).. relevant bits dmesg:- atapci0: port 0xa400-0xa40f,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 mem 0xe8004000-0xe80041ff irq 18 at device 11.0 on pci1 ad4: 76319MB [155061/16/63] at ata2-master SATA150 ad6: 76319MB [155061/16/63] at ata3-master SATA150 uname:- FreeBSD shodan.ninjalabs.co.uk 5.3-STABLE FreeBSD 5.3-STABLE #0: Sun Nov 14 08:29:40 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SHODAN i386 Works fine here. Could this be a DMA / IRQ conflict on your particular configuration? I have had problems with Raptor disks on a supermicro platform (ICH5 controller) under Windows. Could it be the disks? Cheers, Chris Smith http://www.ninjalabs.co.uk/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: sil3112a SATA Controller, current status
Maseed wrote: [SNIP] I have to point out in the above e-mail that the problem is not just confined to the 36GB Raptor, which might be a PATA drive with a Marvel chip to make it work with SATA drives, but it also plages *real* native SATA drives as well, since the 74GB Western Digital Raptor I have is a true SATA150 drive with TCQ. Correction, the 74GB Raptor is still not a pure or native SATA device, it still uses the marvell PATA-SATA converter chip. Its true that it supports TCQ but thats the same old way as the IBM deathstars used, and not directly comaprable to the new true SATA NCQ way of things. Anyhow, I am wondering if this issue has been resolved yet or not, either in FreeBSD-current or 5.3-RELEASE-px. I don't want to discard my current OS to install FreeBSD only to find out that the problem is still there. If any sort of error logs or dmesg output is required by a potential developer from this setup of mine, I'll go so far as to resize my partition and install FreeBSD 5.3 and provide them, but the reason why I'm hesitant in doing that is the fact that I run a web-server on my computer that cannot stay down for long, as some friends of mine depend on it. If you want 24/7 uptime, you *really* should be bying hardware of a quality that matches that, the SiI3112 is *not* in that league, not even close. -- -Søren ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: PCMCIA Wireless Card Question
Andrew L. Gould wrote: > On Tuesday 16 November 2004 12:30 pm, Tom Connolly wrote: >> Hello List, >> I have just put FreeBSD 5.3 Release on my Dell Latitude C600 laptop. >> I wish to go wireless but I'm new to this technology. I have looked >> through the hardware compatibility notes and have found several >> supported wireless cards. My question is, what do I have to do >> (ports to install, configuration, etc.) to get the wireless >> connection up and running. >> >> Any help would be appreciated. >> >> Thanks, >> >> Tom >> > > Based on your email, I will assume that you purchased a compatible > wireless adapter. > > 1. Make sure your pccard slots work in FreeBSD 5.3. There's no use in > struggling with the pccard if the slots don't work. > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/laptop/x58.html > > > 2. Make sure your kernel is configured for your hardware. You may > have to add devices to your kernel: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.h tml > > > 3. Configure your wireless connection: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wirele ss.html > > > Have fun, > > Andrew Gould Oops, I guess I missed the top line in the Handbook that I can skip making device nodes since I am using FreeBSD 5.3. I assume I still have to add the entry for the kernel though. Is that correct? Then I assume I have to recompile the kernel which I have never done before. Is this also correct? Sorry for the remedial questions. I as still a newbie. Tom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ports vulnerabilities
On 2004.11.18 12:27:38 -0600, Kevin D. Kinsey, DaleCo, S.P. wrote: > Dan Mahoney, System Admin wrote: > > >I tried to install a port which had a conflict (ImageMagick) > >but I didn't feel the vulnerability was significant enough to > >warrant waiting for a new port to be created. I looked in > >the ports man page for an override environment variable, > >but "vulnerability check" isn't even mentioned there. > >Could this please get stuck into the manpages? First, the knob you are looking for is DISABLE_VULNERABILITIES, which is not as nice at it sounds, since it just disables the check ;-). > I'm cc-ing to doc@ ... we'll see if anyone wants to comment. > [ Umm, yeah ... they're great guys, but busy. We'll see] Good call, it's much more likely we will notice something when doc@ gets poked :-). > You might also check with ports@ ... or just file a PR and > see what comes of it. > > It'l also quite possible that spending some time in the ports@ > list archives might turn up some of the info your're looking > for > > Also, what manpage would you *expect* to see this information > in? You mention ports(7), but someone already thinks "this > manpage is too long" ;-) To start with the last part, see rc.conf(5) and you will see a long manual page :-). I think this belongs in ports(7). Anyway, I actually added info about the DISABLE_VULNERABILITIES knob to my local WIP tree a few weeks ago, I just haven't gotten around to cleaning it up and committing it. I will bump it a bit up on my TODO list. -- Simon L. Nielsen FreeBSD Documentation Team pgpPE6AgIEAyt.pgp Description: PGP signature
RE: PCMCIA Wireless Card Question
Andrew L. Gould wrote: > On Tuesday 16 November 2004 12:30 pm, Tom Connolly wrote: >> Hello List, >> I have just put FreeBSD 5.3 Release on my Dell Latitude C600 laptop. >> I wish to go wireless but I'm new to this technology. I have looked >> through the hardware compatibility notes and have found several >> supported wireless cards. My question is, what do I have to do >> (ports to install, configuration, etc.) to get the wireless >> connection up and running. >> >> Any help would be appreciated. >> >> Thanks, >> >> Tom >> > > Based on your email, I will assume that you purchased a compatible > wireless adapter. > > 1. Make sure your pccard slots work in FreeBSD 5.3. There's no use in > struggling with the pccard if the slots don't work. > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/laptop/x58.html > > > 2. Make sure your kernel is configured for your hardware. You may > have to add devices to your kernel: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.h tml > > > 3. Configure your wireless connection: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wirele ss.html > > > Have fun, > > Andrew Gould Thank you for the good information. I completed step one, my pccard slot works fine. I then plugged in my wireless card (Netgear WG311T supported by the ath(4) driver). My system said that no driver was configured for this card. I assume now I must configure my kernel as step 2 indicates but I am a little confused. Would I just add "device ath" to the kernel config file? Also, do I then have to create a device node? Thank you for your help. Tom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ports vulnerabilities
Dan Mahoney, System Admin wrote: I had heard a bit about the new "vulnerability check" in FreeBSD's ports. I tried reading /usr/ports/updating and saw something like: Description: A new vulnerabilities database has been added to the ports system in order to keep more accurate, up-to-date, track of security vulnerabilities. The ports system now knows how to query that database and dynamically prevents the installation of vulnerable ports. I had to do some more digging around on various googles to find out that in order to USE this ability, I had to install the portaudit port. This seems like a useful feature, but I'm curious: Why isn't this in the base system? I can't answer that, as I'm nobody special. The functionality is rather new, and I'm assuming that either they wanted more "modularity" in keeping with some other recent trends, or else they plan to put it in base but haven't yet, or, quite possibly, it's not yet the Best Thing(tm) to do for some reason that seems unclear to me (and maybe to you as well...) I tried to install a port which had a conflict (ImageMagick) but I didn't feel the vulnerability was significant enough to warrant waiting for a new port to be created. I looked in the ports man page for an override environment variable, but "vulnerability check" isn't even mentioned there. Could this please get stuck into the manpages? -Dan Mahoney I'm cc-ing to doc@ ... we'll see if anyone wants to comment. [ Umm, yeah ... they're great guys, but busy. We'll see] You might also check with ports@ ... or just file a PR and see what comes of it. It'l also quite possible that spending some time in the ports@ list archives might turn up some of the info your're looking for Also, what manpage would you *expect* to see this information in? You mention ports(7), but someone already thinks "this manpage is too long" ;-) Let discussion begin? Kevin Kinsey DaleCo, S.P. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Disk mounter panel utility in gnome
Cam wrote: I've configured necessary files to allow user mounting through the console, but the diskmounter still doesnt work. This is the error message I get. It works as root, of course. *Cannot mount device *"mount /home/Orbo/Floppy 2>1&1" reported: mount: /home/Orbo/Floppy: unknown special file or file system Command doesn't look right to me. What device node are you trying to mount onto /home/Orbo/Floppy? Looks as if the shell thinks your redirection is part of the mount(8) call. What else have you tried? Kevin Kinsey DaleCo, S.P. -- MOUNT(8)FreeBSD System Manager's Manual NAME mount -- mount file systems SYNOPSIS mount [-adfpruvw] [-F fstab] [-o options] [-t ufs | external_type] mount [-dfpruvw] special | node mount [-dfpruvw] [-o options] [-t ufs | external_type] special node ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
4.4bsd question
Hello there, I would like to know which is the latest version of the "4.4BSD-lite" Kernel and also could you send me a copy (preferably the one which FreeBSD ships with)?? please email it to [EMAIL PROTECTED] , as such i found one online but it was modded quite a bit and I couldnt figure out the one which comes with FreeBSD 4.7, (Sorry i'm not all that bright so not having documentation about the kernel really gives me nightmares), also if you could direct me to the documentation, and also if you could direct me to where I could go about getting information on the development of drivers for the kernel (in specific for WiFi 802.11b/g Lan cards, although i'm not to sure about the availability of such a document). Anyways any help would greatly be appreciated. Thanks in advance, Karim F. Ali Devign Labs ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
account management pam_ldap+nss_ldap
Hello all, I would greatly appreciate if someone could help me or point me to the right place to find a solution to the following problem. I have a system (5.3-release) configured to do user authentication through pam and ldap using map_ldap.so and nss_ldap.so. Everything is fine with that configuration, I am able to login, ssh and ftp to the system using users configured only in ldap with no problem. What I'm looking for is a way to manage these accounts, I mean to temporarily disable (locking) an account or a group of accounts, like "pw lock username", set accounts expiration date and so on. I spent the last 2 days searching but found nothing, or maybe I was looking in wrong places? Please if someone did things like described above, help me. Actually, I'm most interested in disabling/enabling an ldap account/group without deleting it. I was trying to find a solution myself and have thought of following. To create an ldap schema file which will have an objectclass with the accountEnabled attribute (and maybe some others too). To include this objectclass for DNs containing users and somehow to create a filter in nss_ldap config file wich will do the filtering taking into account the accountEnabled flag. What do you think of this approach? I would appreciate any suggestions. Thanks, Cezar Fistik ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: BSD equivalents of autoconf, automake, etc.
Jonathon McKitrick wrote: This is exactly what I needed. I wanted to experiment with building, installing, linking, and the same with my own test 'libraries.' It looks like this is much easier than autoconf. Why do you want to use autoconf at all, if you want to build on only one system? Autoconf (and automake/libtool) was, as originally intended, designed to ease cross-platform portability. mkb. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: FW: FreeBSD donation (sponsorship)
At Thu, 18 Nov 2004 it looks like Crystal Chiang composed: > I don't really understand how the FreeBSD organization works, it seems like > my e-mail was replied by an amount of people that's not part of this > organization. If you don't represent FreeBSD, I will not respond from this > point on. > Crystal, I would like to thank you for your kind offer and I truly hope that someone from the FreeBSD "organization" actually does respond to you. As for all the computer mailing lists I belong to, there are very advanced users who have been into computing for over 20 years and there are people who are still looking forward to shaving for the first time or getting their first drivers license. With all that said, we all group together and normally rally around the topic of computer problems and how to fix them. I truly hope you don't judge us on a few inappropriate posts. What your offering to us is a very valuable service and I'm truly touched by your generosity. Namaste ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Booting with ACPI enabled by default? (5.3)
On Thu, Nov 18, 2004 at 09:33:40PM +0530, Subhro wrote: > Can we have a dmesg -a on the box with ACPI disabled? > Sure - I'm including it below. Please note, that the box *does* come up with ACPI enabled when I manually choose the menu item on the boot menu (beastie.4th) that says "boot with acpi enabled". I only wonder how I do get the box to boot with acpi by default... Best regards, -ewald -- < Cut here > -- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #1: Thu Nov 18 17:50:05 CET 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/EJ-SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 1073741824 (1024 MB) avail memory = 1041195008 (992 MB) MPTable: ioapic0: Changing APIC ID to 1 ioapic0: Assuming intbase of 0 ioapic0 irqs 0-23 on motherboard npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pcib0: pcibus 0 on motherboard pci0: on pcib0 agp0: mem 0xf400-0xf7ff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) uhci0: port 0x2440-0x245f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x2460-0x247f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x2480-0x249f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 pci5: on pcib2 bge0: mem 0xf040-0xf040 irq 20 at device 2.0 on pci5 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:11:85:0f:46:31 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x24c0-0x24cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 atapci1: port 0x24d0-0x24df,0x280c-0x280f,0x24f8-0x24ff,0x2808-0x280b,0x24f0-0x24f7 irq 18 at device 31.2 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 pci0: at device 31.5 (no driver attached) cpu0 on motherboard pnpbios: error 0/82 getting device count/size limit orm0: at iomem 0xcd000-0xcefff,0xc-0xccfff on isa0 pmtimer0 on isa0 atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 fdc0: at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter "TSC" frequency 2992706535 Hz quality 800 Timecounters tick every 10.000 msec ad0: 157066MB [319120/16/63] at ata0-master UDMA100 ad1: 38166MB [77545/16/63] at ata0-slave UDMA100 acd0: DVDR at ata1-master UDMA33 acd1: DVDROM at ata1-slave UDMA40 Mounting root from ufs:/dev/ad0s2a Pre-seeding PRNG: kickstart . Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/ad0s2b as swap device Starting file system checks: /dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2a: clean, 225860 free (604 frags, 28157 blocks, 0.2% fragmentation) /dev/ad0s2g: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2g: clean, 25133177 free (97 frags, 3141635 blocks, 0.0% fragmentation) /dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2e: clean, 487033 free (33 frags, 60875 blocks, 0.0% fragmentation) /dev/ad0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2f: clean, 9370066 free (35810 frags, 1166782 blocks, 0.3% fragmentation) /dev/ad0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2d: clean, 978383 free (983 frags, 122175 blocks, 0.1% fragmentation) Setting hostname: auro.somedomain.at. bge0: flags=8843
RE: FW: FreeBSD donation (sponsorship)
I don't really understand how the FreeBSD organization works, it seems like my e-mail was replied by an amount of people that's not part of this organization. If you don't represent FreeBSD, I will not respond from this point on. Thank you. Crystal -Original Message- From: Loren M. Lang [mailto:[EMAIL PROTECTED] Sent: Thursday, November 18, 2004 1:35 AM To: stheg olloydson Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: FW: FreeBSD donation (sponsorship) On Wed, Nov 17, 2004 at 05:12:02PM -0800, stheg olloydson wrote: > it was said: > > >Hi FreeBSD, > >My name is Crystal Chiang, I sent this e-mail to donation at FreeBSD > about a > >week ago, but no one has got in contact with me, so I am not sure > who's in > >charge of the PR or marketing over there. Could you please forward > this > >e-mail to the appropriate person / people, and have them get back to > me > soon? Thanks a lot. > > > > > >Crystal Chiang > >Multimedia | Marketing > > > >E: [EMAIL PROTECTED] > >T: 604.688.8946 ext: 127 > >F: 604.688.8934 > >- > >www.netnation.com > >www.domainpeople.com > > > > > >-Original Message- > >From: Crystal Chiang [mailto:[EMAIL PROTECTED] > >Sent: Friday, November 12, 2004 1:47 PM > >To: [EMAIL PROTECTED] > >Subject: FreeBSD donation (sponsorship) > > > > > >Hi FreeBSD, > >My name is Crystal Chiang, I am contacting you on behalf of NetNation > >Communications Inc. regarding the sponsorship / partnership with > FreeBSD. > >NetNation is a Hosting Solution Provider and we have been in the > hosting > >industry since 1997. If you are not familiar with our company, you > could > >check out our Web site for more information. > > > >http://www.netnation.com/company/index.php > > > > > >I am not sure if you do sponsorship/partnership with any other > >organizations, I am interested in sponsoring the FreeBSD.org web site, > if > >someone from your organization could get back to me with some > information > >would be much appreciated. I could be reached at this e-mail address, > or by > >phone tollfree: 1.888.277.000. > > > >Take care and have a nice day. > > > > > >Crystal Chiang > >Multimedia | Marketing > > > >E: [EMAIL PROTECTED] > >T: 604.688.8946 ext: 127 > >F: 604.688.8934 > >- > >www.netnation.com > >www.domainpeople.com > > Hello, > > I speak only for myself, not the FBSD project or community. I think > this is a lovely spam^H^H^H^Hoffer. One question though, would you be > hosting freebsd.org on a Linux or Windows server? Judging by your site > it could be either. > http://www.netnation.com/products/managedhosting.php > Who decides? $ telnet www.netnation.com http Trying 204.174.223.48... Connected to www.netnation.com. Escape character is '^]'. HEAD / HTTP/1.0 HTTP/1.1 301 Moved Permanently Date: Thu, 18 Nov 2004 09:30:10 GMT Server: Apache/1.3.26 (Unix) Debian GNU/Linux PHP/4.1.2 mod_ssl/2.8.9 OpenSSL/0.9.6c mod_jk/1.1.0 Location: http://www.netnation.com/ Connection: close Content-Type: text/html; charset=iso-8859-1 At least it's not Micro$oft IIS 4.0 > > Stheg > > > > > > __ > Do you Yahoo!? > Meet the all-new My Yahoo! - Try it today! > http://my.yahoo.com > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
security run output question (GEOM: create disk)
Hello, Does anybody know what this means when I see this in a daily security run output?: locahost.local kernel log messages: GEOM: create disk ad0 dp=0xc6b77d60 GEOM: create disk cd0 dp=0xc69a8600 I don't recall ever seeing this in my daily outputs, but my boss sent me an email with this and he wants to know what it means. If I do a 'dmesg' on my computer, I also get: GEOM: create disk ad0 dp=0xc6b63160 GEOM: create disk cd0 dp=0xc6983e00 What does this mean, and what does it mean when it shows up in the security run output? Thanks for any info. -Duane ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: BSD equivalents of autoconf, automake, etc.
On 2004-11-18 16:59, Jonathon McKitrick <[EMAIL PROTECTED]> wrote: > On Thu, Nov 18, 2004 at 06:32:21PM +0200, Giorgos Keramidas wrote: > : The minimal Makefile for building a program in FreeBSD looks something > : like this: > : > : PROG= foo > : > : .include > : > : I can't even begin to describe all the 'make magic' that is hidden in > : /usr/share/mk/*.mk, but you can find out most of it by reading the > : comments in these make(1) include files. > > This is exactly what I needed. I wanted to experiment with building, > installing, linking, and the same with my own test 'libraries.' It looks > like this is much easier than autoconf. I usually copy stuff from the infinite pool of examples that /usr/src can be. For building a library, I jump in /usr/src/lib/libfoo and skim through a couple of Makefiles. After a while, you'll get the hang of it and write all you need without looking at the `samples' :) I got so used to working in the bsd.*.mk paradigm, that when I had to build a Solaris kernel module for a system that uses GNU make, I wrote a make include called sunos.kmod.mk and then started writing in Solaris stuff like this: $ cat sunos/modules/foo/Makefile KMOD= foo SRCS= foo.c fooddi.c foobar.c include sunos.kmod.mk $ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to install from ftp
It's in the modem, it's a speedstream 5200 which acts as a firewall, I do have port forwarding set up so I can ssh into it but not sure about ftp. On Thu, 18 Nov 2004 10:49:38 -0600, Conrad J. Sabatier <[EMAIL PROTECTED]> wrote: > On Thu, 18 Nov 2004 10:30:27 -0600, CHris Rich <[EMAIL PROTECTED]> > wrote: > > > I've tried using passive and still no luck, once i can get in front of > > the box I will see what I can do with it (perhaps I need to set some > > port forwarding up) > > Do you mean on the modem or in your machine's firewall/nat setup? If > the latter, I'm sure someone here could help. :-) > > Anyway, good luck! > > -- > > > Conrad J. Sabatier <[EMAIL PROTECTED]> -- "In Unix veritas" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: BSD equivalents of autoconf, automake, etc.
On Thu, Nov 18, 2004 at 06:32:21PM +0200, Giorgos Keramidas wrote: : The minimal Makefile for building a program in FreeBSD looks something : like this: : : PROG= foo : : .include : : I can't even begin to describe all the 'make magic' that is hidden in : /usr/share/mk/*.mk, but you can find out most of it by reading the : comments in these make(1) include files. This is exactly what I needed. I wanted to experiment with building, installing, linking, and the same with my own test 'libraries.' It looks like this is much easier than autoconf. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"