Re: discarded oversize frames
Have you found a solution to this? I am having the same problems on a machine very recently updated (cvsupped + buildworld on 4/14/2005): kernel.log:Feb 25 13:46:40 trinity kernel: rl0: discard oversize frame (ether type 3db4 flags 3 len 8381 max 1514) kernel.log:Apr 10 14:27:37 trinity kernel: rl0: discard oversize frame (ether type 5a84 flags 3 len 2614 max 1514) kernel.log:Apr 18 16:17:53 trinity kernel: rl0: discard oversize frame (ether type 1867 flags 3 len 16941 max 1514) After the message, the machine becomes completely unresponsive and I have to do a power-off, power-on reset. -Kyle I recieved these messages a day before my unbranded rl0 died. It didn't freeze my system but it did refuse to send/recieve packets... Mark -- PGP: http://www.darklogik.org/pub/pgp/pgp.txt B776 43DC 8A5D EAF9 2126 9A67 A7DA 390F DEFF 9DD1 pgpogvycHtlIX.pgp Description: PGP signature
IGMP proxy?
I'm being told by my ISP that I need an IGMP proxy to get my FreeBSD firwall to handle multicast info from their network (actually BBC radio content) - I can't find such a proxy for FreeBSD - is there one? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
squid problem
On the machine i am running squid, it runs the program fine, but as soon as anything goes to use the proxy server the program dies. How can i run squid so that im able to see why its crashing/closing when something goes to use it? im running FreeBSD 5.4-Stable CVSUPED and updated Ports/Src/Kernel as of about 10 hours ago. -- Yours Sincerely Shinjii http://www.shinji.nq.nu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
NATD server problem on 5.3 ?
Well i recently installed my first natd server on freebsd 5.3, but its not working ? here is wat i did .. 1. compiles kernal with the following options options IPFIREWALL options IPV6FIREWALL options IPDIVERT 2. made the following entries in rc.conf defaultrouter=10.0.0.1 gateway_enable=YES hostname=natserver ifconfig_fxp0=inet 192.168.0.1 netmask 255.255.255.0 ifconfig_xl0=inet 10.0.0.5 netmask 255.255.255.0 firewall_enable=yes natd_enable=yes natd_interface=xl0 natd_flags=-f /etc/natd.conf 3. made the following entries in rc.firewall /sbin/ipfw -f flush /sbin/ipfw add allow all from any to any via fxp0 /sbin/ipfw add allow icmp from any to any out via xl0 /sbin/ipfw add allow all from any to any via lo0 /sbin/ipfw add divert natd ip from any to any via xl0 /sbin/ipfw add allow ip from any to 10.0.0.5 in recv xl0 /sbin/ipfw add allow ip from 10.0.0.5 to any out xmit xl0 4. configure the windows clients as follows ipaddress = 192.168.0.3 subnet = 255.255.255.0 gateway = 192.168.0.1 dns server = 192.168.0.2 dns server capable of resolving internet local address this is all that i have done but still interet is not working on clients , what should i do now ? *º¤., ¸¸,.¤º*¨¨¨*¤ Allah-hu-Akber*º¤., ¸¸,.¤º*¨¨*¤ God is the Greatest __ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't build ports on older FreeBSD machine
The ports support policy is right there on www.freebsd.org/ports for all to read. It's not reasonable, IMHO. If a release hasn't been EOLed, ports should work on it. May I recommend openbsd as a cure for what ails ye? -- Joel Rees ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
smartmontools question
dear list, i just installed smartmonutils from ports on a 4.11-release box. when i run # /usr/local/sbin/smartctl -a ad0 I get the error message smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen [snip] Smartctl open device: ad0 failed: Inappropriate ioctl for device the same with the second disk in the system (ad2). the same if i user /dev/ad[02]+. what might be the problem? TIA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: smartmontools question
FreeBSD Daemon wrote on Tuesday 19 April 2005 10:34 in the group list.freebsd.questions: dear list, i just installed smartmonutils from ports on a 4.11-release box. when i run # /usr/local/sbin/smartctl -a ad0 I get the error message smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen [snip] Smartctl open device: ad0 failed: Inappropriate ioctl for device the same with the second disk in the system (ad2). the same if i user /dev/ad[02]+. what might be the problem? TIA S.M.A.R.T. must be supported by your hardware (disk diskcontroller) and be enabled through your bios setup. smartctl must be run by root. -- Key-ID = A6581435 E-mail address is valid ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: smartmontools question
On Tue, Apr 19, 2005 at 11:26:24AM +0200, Kees Plonsz wrote: FreeBSD Daemon wrote on Tuesday 19 April 2005 10:34 in the group list.freebsd.questions: dear list, i just installed smartmonutils from ports on a 4.11-release box. when i run # /usr/local/sbin/smartctl -a ad0 I get the error message smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen [snip] Smartctl open device: ad0 failed: Inappropriate ioctl for device the same with the second disk in the system (ad2). the same if i user /dev/ad[02]+. what might be the problem? TIA S.M.A.R.T. must be supported by your hardware (disk diskcontroller) and be enabled through your bios setup. smartctl must be run by root. and moreover, it must be supported by ATAng which presented only in 5.x branch -Dmitry. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: NATD server problem on 5.3 ?
faisal gillani wrote on Tuesday 19 April 2005 10:08 in the group list.freebsd.questions: Well i recently installed my first natd server on freebsd 5.3, but its not working ? here is wat i did .. 1. compiles kernal with the following options options IPFIREWALL options IPV6FIREWALL options IPDIVERT 2. made the following entries in rc.conf defaultrouter=10.0.0.1 gateway_enable=YES hostname=natserver ifconfig_fxp0=inet 192.168.0.1 netmask 255.255.255.0 ifconfig_xl0=inet 10.0.0.5 netmask 255.255.255.0 firewall_enable=yes natd_enable=yes natd_interface=xl0 natd_flags=-f /etc/natd.conf 3. made the following entries in rc.firewall /sbin/ipfw -f flush /sbin/ipfw add allow all from any to any via fxp0 /sbin/ipfw add allow icmp from any to any out via xl0 /sbin/ipfw add allow all from any to any via lo0 /sbin/ipfw add divert natd ip from any to any via xl0 /sbin/ipfw add allow ip from any to 10.0.0.5 in recv xl0 /sbin/ipfw add allow ip from 10.0.0.5 to any out xmit xl0 4. configure the windows clients as follows ipaddress = 192.168.0.3 subnet = 255.255.255.0 gateway = 192.168.0.1 dns server = 192.168.0.2 dns server capable of resolving internet local address this is all that i have done but still interet is not working on clients , what should i do now ? It seems all quite well. You can debug this kind of problems yourself. On the natd-server you start: # tcpdump -i xl0 Then you start on your window client: ( any ip address wich responds to ping will do ) # ping 194.109.21.3 Then you have to see on the natd-server: 11:57:21.777620 IP natd-server xs2.xs4all.nl: icmp 64: echo request seq 0 11:57:21.785412 IP xs2.xs4all.nl natd-server: icmp 64: echo reply seq 0 If it doesnot show anything, you can repeat this for your fxp0 interface ( where the window client is connected i suppose ) From the results you can conclude wich connection is (not) working -- Key-ID = A6581435 E-mail address is valid ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gmirror losing drive
Danny Howard wrote: I'm not entirely sure on this one ... you have RTFM? Obviously. I started with the tutorial at http://people.freebsd.org/~rse/mirror/, but I read the whole manual before setting it up. There's gmirror configure -a ... but that is about synchronization. Yes, and synchronization works fine. What does gmirror info says before you forget / insert? Hm, I'd have to reboot. Right now it says: Geom name: gm0 State: COMPLETE Components: 2 Balance: split Slice: 2048 Flags: NONE SyncID: 5 ID: 2253479574 Providers: 1. Name: mirror/gm0 Mediasize: 36778544640 (34G) Sectorsize: 512 Mode: r3w3e2 Consumers: 1. Name: da1 Mediasize: 36778545152 (34G) Sectorsize: 512 Mode: r3w3e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 5 ID: 4069582681 2. Name: da0 Mediasize: 36778545152 (34G) Sectorsize: 512 Mode: r3w3e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 5 ID: 4172309470 Geom name: gm0.sync After a reboot I only see da1 under Consumers and State is DEGRADED (Componentis are still 2, though). My hunch is that you are not rebooting cleanly, so when the system comes up, gmirror thinks it has to re-sync the disks I would expect this behaviour, but: a) I am rebooting cleanly; b) it doesn't just need resync (that happened to me on another machine), it really loses one drive/Consumer!!! but it is not configured to do so automatically? It is, and in fact it does, as soon as I forget/reinsert da0. What command / process did you use to set up your mirror? Hard to remember. I more or less followed the tutorial above. BTW: system is 5.3p9 now bye Thanks av. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: smartmontools question
dima wrote: and moreover, it must be supported by ATAng which presented only in 5.x branch Would it work with SCSI on 4.11? bye Thanks av. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: NATD server problem on 5.3 ?
Saying it's not working is way to vague. You need to post more details about what is not working. Like can the 5.3 server ping the public internet? Can it ping PCs on the LAN? Can a win LAN PC ping the server? What does the firewall log contain? Have you tested with firewall out of the way by having only single rule to pass all packets? /sbin/ipfw -f flush /sbin/ipfw add allow all from any to any -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of faisal gillani Sent: Tuesday, April 19, 2005 4:08 AM To: freebsd-questions@freebsd.org Subject: NATD server problem on 5.3 ? Well i recently installed my first natd server on freebsd 5.3, but its not working ? here is wat i did .. 1. compiles kernal with the following options options IPFIREWALL options IPV6FIREWALL options IPDIVERT 2. made the following entries in rc.conf defaultrouter=10.0.0.1 gateway_enable=YES hostname=natserver ifconfig_fxp0=inet 192.168.0.1 netmask 255.255.255.0 ifconfig_xl0=inet 10.0.0.5 netmask 255.255.255.0 firewall_enable=yes natd_enable=yes natd_interface=xl0 natd_flags=-f /etc/natd.conf 3. made the following entries in rc.firewall /sbin/ipfw -f flush /sbin/ipfw add allow all from any to any via fxp0 /sbin/ipfw add allow icmp from any to any out via xl0 /sbin/ipfw add allow all from any to any via lo0 /sbin/ipfw add divert natd ip from any to any via xl0 /sbin/ipfw add allow ip from any to 10.0.0.5 in recv xl0 /sbin/ipfw add allow ip from 10.0.0.5 to any out xmit xl0 4. configure the windows clients as follows ipaddress = 192.168.0.3 subnet = 255.255.255.0 gateway = 192.168.0.1 dns server = 192.168.0.2 dns server capable of resolving internet local address this is all that i have done but still interet is not working on clients , what should i do now ? *:$., 88,.$:*(((*$ Allah-hu-Akber*:$., 88,.$:*((*$ God is the Greatest __ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: smartmontools question
Andrea Venturoli wrote on Tuesday 19 April 2005 14:39 in the group list.freebsd.questions: dima wrote: and moreover, it must be supported by ATAng which presented only in 5.x branch Would it work with SCSI on 4.11? I heard there are troubles with several scsi disk-drives, even on FreeBSD 5.3 see msg-id: [EMAIL PROTECTED] -- Key-ID = A6581435 E-mail address is valid ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: smartmontools question
Andrea Venturoli wrote: dima wrote: and moreover, it must be supported by ATAng which presented only in 5.x branch Would it work with SCSI on 4.11? bye Thanks av. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] No, both ATA (Seagate ST3120026A), see /var/run/dmesg.boot: [...] Creating DISK ad0 ar: FreeBSD check1 failed ad0: ST3120026A/3.54 ATA-6 disk at ata0-master ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, BIOSDMA ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 Creating DISK ad2 ar: FreeBSD check1 failed ad2: ST3120026A/3.06 ATA-6 disk at ata1-master ad2: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, BIOSDMA ad2: piomode=4 dmamode=2 udmamode=5 cblid=1 [...] The M/B is a Supermicro P4SCT: http://www.supermicro.com/products/motherboard/P4/875/P4SCT.cfm Zheyu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD 5.3 and forcible unmounts
Plug a USB mass-storage-type still camera, mount it, unplug it, and try to forcibly unmount it using 'umount -f'. The whole system hangs right away. Is it a known bug ? -- There are 10 types of people in the world: Those who understand binary and those who don't ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
dual processor
I have a dual processor server Will freebsd use them both is so When I install it how do I get it to use it ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
what kind of BBS software on freebsd work well
Hi, everyone. There are some excellen bbs software, e.g vbb, phpbb, FUDforum, but do I have another choice? I just want to install a BBS software on my personal web, build on php and mysql database, and it should be a free software (GPL lisence?), and should support mulity lanuage. What about Simplified Chinese? _ Do You Yahoo!? 150MP3 http://music.yisou.com/ http://image.yisou.com 1G1000 http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cvsup-mirror
Hello all, I have installed ports/cvsup-mirror at defaults settings and it downloads over 3GB files on my hard drive (I guess it dowloads all releases and all ports collections). Does anyone knows how to reduce traffic if I need only fresh ports and RELENG_5_3 cvs tag available for cvsup ??? With best regards, [MCP, MCSD] Vyacheslav mailto:[EMAIL PROTECTED] Origin: --= DVG_Lab =-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: what kind of BBS software on freebsd work well
I would just use phpbb...it's a snap to setup, and doesn't take much to manage. --Brian On 4/19/05, liu jiachang [EMAIL PROTECTED] wrote: Hi, everyone. There are some excellen bbs software, e.g vbb, phpbb, FUDforum, but do I have another choice? I just want to install a BBS software on my personal web, build on php and mysql database, and it should be a free software (GPL lisence?), and should support mulity lanuage. What about Simplified Chinese? _ Do You Yahoo!? 150MP3 http://music.yisou.com/ http://image.yisou.com 1G1000 http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- _-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_ Brian McCann Systems Network Administrator, K12USA I don't have to take this abuse from you -- I've got hundreds of people waiting to abuse me. -- Bill Murray, Ghostbusters ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: dual processor
By default, no...I don't think it will use both processors. You have to make a custom kernel and enable SMP. Look here http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-building.html for how to do it. In 5.x, I believe all you need is options SMP, but I could be wrong. If you build the sample LINT kernel config, it will show you in there. Good luck, --Brian On 4/19/05, William Biggs [EMAIL PROTECTED] wrote: I have a dual processor server Will freebsd use them both is so When I install it how do I get it to use it ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- _-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_ Brian McCann Systems Network Administrator, K12USA I don't have to take this abuse from you -- I've got hundreds of people waiting to abuse me. -- Bill Murray, Ghostbusters ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error compiling HandBrake 0.6.2_2: core/X264Enc.c, function `HBX264EncInit'
How can I fix it, please ? Info / log: uname -a FreeBSD dexter.lab 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 cc --version cc (GCC) 3.4.2 [FreeBSD] 20040728 sudo portinstall handbrake --- Installing 'handbrake-0.6.2_2' from a port (multimedia/handbrake) --- Building '/usr/ports/multimedia/handbrake' === Cleaning for atk-1.9.1 === Cleaning for unzip-5.52_1 === Cleaning for arts-1.4.0,1 === Cleaning for esound-0.2.35_1 === Cleaning for faac-1.24_4 === Cleaning for faad2-2.0_5,1 === Cleaning for jackit-0.99.0 === Cleaning for lame-3.96.1 === Cleaning for liba52-0.7.4_1 === Cleaning for libaudiofile-0.2.6 === Cleaning for libmad-0.15.1b_1 === Cleaning for libogg-1.1.2_1,3 === Cleaning for libsamplerate-0.1.2 === Cleaning for libsndfile-1.0.11 === Cleaning for libvorbis-1.1.0_1,3 === Cleaning for nas-1.7 === Cleaning for portaudio-18.1_2 === Cleaning for libiconv-1.9.2_1 === Cleaning for autoconf-2.53_3 === Cleaning for autoconf-2.59_2 === Cleaning for automake-1.5_2,1 === Cleaning for bison-1.75_2 === Cleaning for doxygen-1.4.1 === Cleaning for gettext-0.14.1 === Cleaning for glib-2.6.4 === Cleaning for gmake-3.80_2 === Cleaning for imake-6.8.2 === Cleaning for jam-2.5_2 === Cleaning for libltdl-1.5.10 === Cleaning for libtool-1.3.5_2 === Cleaning for libtool-1.5.10_1 === Cleaning for m4-1.4.3 === Cleaning for nasm-0.98.39,1 === Cleaning for p5-gettext-1.03 === Cleaning for pkgconfig-0.17.2 === Cleaning for qmake-3.3.4 === Cleaning for sdl-1.2.8,2 === Cleaning for t1lib-5.0.1,1 === Cleaning for aalib-1.4.r5_1 === Cleaning for gd-2.0.33_1,1 === Cleaning for graphviz-2.2 === Cleaning for imlib2-1.2.0_2 === Cleaning for jpeg-6b_3 === Cleaning for lcms-1.14,1 === Cleaning for libmng-1.0.8 === Cleaning for libungif-4.1.3 === Cleaning for png-1.2.8_1 === Cleaning for svgalib-1.4.3_4 === Cleaning for tiff-3.7.1_2 === Cleaning for perl-5.8.6_2 === Cleaning for python-2.4.1 === Cleaning for tcl-8.4.7,1 === Cleaning for djbfft-0.76_2 === Cleaning for fftw3-3.0.1_4 === Cleaning for help2man-1.35.1 === Cleaning for hicolor-icon-theme-0.5 === Cleaning for shared-mime-info-0.16_1 === Cleaning for ffmpeg-0.4.9.p1_2 === Cleaning for libdvdcss-1.2.8_1 === Cleaning for libdvdread-0.9.4_1 === Cleaning for libmpeg2-0.4.0b_1 === Cleaning for mpeg4ip-libmp4v2-1.1_1 === Cleaning for xvid-1.0.3,1 === Cleaning for amspsfnt-1.0_3 === Cleaning for cmpsfont-1.0_4 === Cleaning for cups-base-1.1.23.0_3 === Cleaning for dvipsk-tetex-5.95a_1 === Cleaning for freetype2-2.1.9 === Cleaning for ghostscript-gnu-7.07_12 === Cleaning for gsfonts-8.11_2 === Cleaning for teTeX-base-3.0_3 === Cleaning for teTeX-texmf-3.0_3 === Cleaning for tex-texmflocal-1.9 === Cleaning for gnutls-1.0.24_1 === Cleaning for libgcrypt-1.2.1 === Cleaning for libgpg-error-1.0_1 === Cleaning for expat-1.95.8 === Cleaning for intltool-0.33 === Cleaning for libxml2-2.6.19 === Cleaning for p5-XML-Parser-2.34_1 === Cleaning for texi2html-1.76_1,1 === Cleaning for libwww-5.4.0_1 === Cleaning for bitstream-vera-1.10_1 === Cleaning for fontconfig-2.2.3,1 === Cleaning for libXft-2.1.6_1 === Cleaning for p5-type1inst-0.6.1_2 === Cleaning for xorg-fonts-encodings-6.8.2 === Cleaning for xorg-fonts-truetype-6.8.2 === Cleaning for gtk-2.6.7 === Cleaning for pango-1.8.1 === Cleaning for qt-3.3.4 === Cleaning for tk-8.4.7,2 === Cleaning for xorg-clients-6.8.2 === Cleaning for xorg-libraries-6.8.2 === Cleaning for xterm-200_2 === Cleaning for handbrake-0.6.2_2 === Vulnerability check disabled, database not found === Extracting for handbrake-0.6.2_2 = Checksum OK for HandBrake-0.6.2-src.tar.gz. === Patching for handbrake-0.6.2_2 === Applying FreeBSD patches for handbrake-0.6.2_2 === handbrake-0.6.2_2 depends on executable: jam - found === handbrake-0.6.2_2 depends on executable: nasm - found === handbrake-0.6.2_2 depends on file: /usr/local/bin/intltool-extract - found === handbrake-0.6.2_2 depends on executable: pkg-config - found === handbrake-0.6.2_2 depends on shared library: a52.0 - found === handbrake-0.6.2_2 depends on shared library: avcodec.1 - found === handbrake-0.6.2_2 depends on shared library: dvdcss.2 - found === handbrake-0.6.2_2 depends on shared library: dvdread.3 - found === handbrake-0.6.2_2 depends on shared library: faac.0 - found === handbrake-0.6.2_2 depends on shared library: mp3lame.0 - found === handbrake-0.6.2_2 depends on shared library: mp4v2.0 - found === handbrake-0.6.2_2 depends on shared library: mpeg2.0 - found === handbrake-0.6.2_2 depends on shared library: ogg.5 - found === handbrake-0.6.2_2 depends on shared library: samplerate.1 - found === handbrake-0.6.2_2 depends on shared library: vorbis.3 - found === handbrake-0.6.2_2 depends on shared library: xvidcore.4 - found === handbrake-0.6.2_2 depends on shared library: atk-1.0.901 -
Re: ELF type 3 not known
On Sun, 17 Apr 2005 05:37:42 -0700, Loren M. Lang wrote: On Wed, Apr 13, 2005 at 01:28:27PM -0400, Steven Friedrich wrote: I got this error on one of two 4.11 boxes. is linux.ko loaded? That's the module responsible for reconizing elf type 3 if I'm not mistaken. That was it. I shot myself in the foot and you had the first aid. Thanks Steven Friedrich 5112 Mount Holyoke Drive Louisville, KY 40216 502-447-7730 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 5.3 and forcible unmounts
Plug a USB mass-storage-type still camera, mount it, unplug it, and try to forcibly unmount it using 'umount -f'. The whole system hangs right away. Is it a known bug ? I can confirm this. FreeBSD-5.3-RELEASE-p9. Mark -- PGP: http://www.darklogik.org/pub/pgp/pgp.txt B776 43DC 8A5D EAF9 2126 9A67 A7DA 390F DEFF 9DD1 pgp1AMPSiYpvp.pgp Description: PGP signature
Ports collection problems...help???
Hi all. I'm having problems with my ports collection on a 4.10 server. I need to keep the versions of the ports the same on these two boxes (for dev reasons), so I rsync'd /usr/ports...and on the target machine, I get the following error when I try to build something: Makefile error: There is a COMMENTFILE in this port. COMMENTFILEs have been deprecated in favor of COMMENT variables. Please, rectify this. *** Error code 1 But...there are no files with COMMENTFILE in their name on the system! Help?!?! Thanks in advance, --Brian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
vmware alternative for freebsd?
Hi, Unfortunately vmware workstation 4.5.x (linux version) is not supported in the ports tree. I was wondering if there are any alternatives to vmware, commercial or freeware. I'm talking about a host version (I'm not talking about guest OSes). Or may be someone has a tutorial about how to install and run the vmware 4.5 host installation on freebsd 5.4. Thanks a lot didier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: vmware alternative for freebsd?
-Original Message- From: [EMAIL PROTECTED] [mailto:owner-freebsd- [EMAIL PROTECTED] On Behalf Of Didier Wiroth Sent: 19 April 2005 14:35 To: freebsd-questions@freebsd.org Subject: vmware alternative for freebsd? the ports tree. I was wondering if there are any alternatives to vmware, commercial or freeware. I'm talking about a host version (I'm not talking about guest OSes). Hey, There is a few out there for fbsd.. but the only one I have used with success is qemu. http://www.freebsd.org/cgi/url.cgi?ports/emulators/qemu/pkg-descr Its quite quick, but I feel it isn't as quick as vmware is/was. But it is something to look at, if its just simple things you need from it it will be fine, but anything CPU heavy I find its not great on. Another one that you might want to look at is bochs http://www.freebsd.org/cgi/url.cgi?ports/emulators/bochs/pkg-descr I cant really say much about this one, I've tried it before but never got anywhere, so it might be good for what you need. Or it might be rubbish :) Anyways gotta do some work :) Bye. Grant. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: vmware alternative for freebsd?
Hey, Thank you for your answer! I will have a look a qemu. But I don't think it is as professional as I need it. Actually I'm working witn xp and windows vmware. I use it for testing unattended installation CDs, service packs etc..., new windows netware client testing, software testing etc... and use a lot the vmware snapshot functionality. I would like to switch my personal OS to freebsd but I can't as I really need a descent vmware-like simulator. Imprisoned in Windows ;-(( Thank you Regards Didier -- Hey, There is a few out there for fbsd.. but the only one I have used with success is qemu. http://www.freebsd.org/cgi/url.cgi?ports/emulators/qemu/pkg-descr Its quite quick, but I feel it isn't as quick as vmware is/was. But it is something to look at, if its just simple things you need from it it will be fine, but anything CPU heavy I find its not great on. Another one that you might want to look at is bochs http://www.freebsd.org/cgi/url.cgi?ports/emulators/bochs/pkg-descr I cant really say much about this one, I've tried it before but never got anywhere, so it might be good for what you need. Or it might be rubbish :) Anyways gotta do some work :) Bye. Grant. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
gmirror on local + nfs volume
I have read about this some months ago on the list, but I can not find it now. Can someone explain how to make a Geom mirror with one local and one remote component ? (so basicly syncronize two volumes between machines automagically) Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
error with cvsup/ezm3-1.2 ?
Trying to install cvsup via ports, I cd into /usr/ports/net/cvsup and it wants to install ezm3, which is fine, but during the ezm3 install, this happens: Any ideas on how to fix it? missing version stamps - compiling ../src/C/FreeBSD4/Csignal.i3 missing version stamps - compiling ../src/C/FreeBSD4/Cstring.i3 missing version stamps - compiling ../src/C/FreeBSD4/Cstdio.i3 new source - compiling ../src/float/IEEE/Real.i3 *** *** runtime error: ***Segmentation violation - possible attempt to dereference NIL ***pc = 0x8157d8c *** use option @M3stackdump to get a stack trace m3build: quake error: quake error: runtime error: m3build failed with error code: 34304 --procedure-- -line- -file--- error -- builtin BuildChunk164 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile PkgInfo 240 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile 38 /usr/ports/lang/ezm3/work/ezm3-1.2/src/PACKAGES gmake: *** [packages] Error 1 *** Error code 2 Stop in /usr/ports/lang/ezm3. *** Error code 1 Stop in /usr/ports/net/cvsup. attached is also my dmesg if anyone wants a look at it? (bad paste job as well) Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Sun Apr 17 09:22:09 EDT 2005 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/POLLINGSMP Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (333.06-MHz 686-class CPU) Origin = GenuineIntel Id = 0x650 Stepping = 0 Features=0x183fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO V,PAT,PSE36,MMX,FXSR real memory = 268435456 (256 MB) avail memory = 253046784 (241 MB) MPTable: INTEL440LX FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Assuming intbase of 0 ioapic0 Version 1.1 irqs 0-23 on motherboard npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface pcib0: Intel 82443LX (440 LX) host to PCI bridge pcibus 0 on motherboard pci0: PCI bus on pcib0 agp0: Intel 82443LX (440 LX) host to PCI bridge mem 0xf000-0xf7ff at de vice 0.0 on pci0 pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: display, VGA at device 0.0 (no driver attached) isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0xffa0-0xffaf,0x376,0x170-0x177,0x3 f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: serial bus, USB at device 7.2 (no driver attached) piix0: PIIX Timecounter port 0xfcb0-0xfcbf at device 7.3 on pci0 Timecounter PIIX frequency 3579545 Hz quality 0 ed0: NE2000 PCI Ethernet (RealTek 8029) port 0xef40-0xef5f irq 11 at device 12. 0 on pci0 ed0: [GIANT-LOCKED] ed0: Ethernet address: 00:80:c8:dd:2d:a2 ed0: if_start running deferred for Giant type NE2000 (16 bit) de0: Digital 21140A Fast Ethernet port 0xec80-0xecff mem 0xfebfff80-0xfebf irq 10 at device 13.0 on pci0 de0: [GIANT-LOCKED] de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0 de0: Ethernet address: 00:e0:29:00:df:0d de0: if_start running deferred for Giant cpu0 on motherboard cpu1 on motherboard orm0: ISA Option ROM at iomem 0xc-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x64,0x60 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: Enhanced floppy controller at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: 1440-KB 3.5 drive on fdc0 drive 0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 ep0: 3Com 3C509-TPO EtherLink III at port 0x350-0x35f irq 5 on isa0 ep0: Ethernet address: 00:50:04:a3:35:62 unknown: PNP0303 can't assign resources (port) unknown: PNP0c02 can't assign resources (port) unknown: PNP0700 can't assign resources (port) Timecounters tick every 1.000 msec ad0: 3093MB FUJITSU MPB3032ATU E/4010 [6704/15/63] at ata0-master UDMA33 ad2: 4125MB FUJITSU MPC3043AT/6018 [8940/15/63] at ata1-master UDMA33 SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad0s1a de0: enabling Full Duplex 100baseTX port IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled de0: enabling 100baseTX port ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: error with cvsup/ezm3-1.2 ?
Never mind, found results on google, I was trying to compile with -O2, using just -O works. :-) Mark M. Parsons wrote: Trying to install cvsup via ports, I cd into /usr/ports/net/cvsup and it wants to install ezm3, which is fine, but during the ezm3 install, this happens: Any ideas on how to fix it? missing version stamps - compiling ../src/C/FreeBSD4/Csignal.i3 missing version stamps - compiling ../src/C/FreeBSD4/Cstring.i3 missing version stamps - compiling ../src/C/FreeBSD4/Cstdio.i3 new source - compiling ../src/float/IEEE/Real.i3 *** *** runtime error: ***Segmentation violation - possible attempt to dereference NIL ***pc = 0x8157d8c *** use option @M3stackdump to get a stack trace m3build: quake error: quake error: runtime error: m3build failed with error code: 34304 --procedure-- -line- -file--- error -- builtin BuildChunk164 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile PkgInfo 240 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile 38 /usr/ports/lang/ezm3/work/ezm3-1.2/src/PACKAGES gmake: *** [packages] Error 1 *** Error code 2 Stop in /usr/ports/lang/ezm3. *** Error code 1 Stop in /usr/ports/net/cvsup. attached is also my dmesg if anyone wants a look at it? (bad paste job as well) Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Sun Apr 17 09:22:09 EDT 2005 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/POLLINGSMP Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (333.06-MHz 686-class CPU) Origin = GenuineIntel Id = 0x650 Stepping = 0 Features=0x183fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO V,PAT,PSE36,MMX,FXSR real memory = 268435456 (256 MB) avail memory = 253046784 (241 MB) MPTable: INTEL440LX FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Assuming intbase of 0 ioapic0 Version 1.1 irqs 0-23 on motherboard npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface pcib0: Intel 82443LX (440 LX) host to PCI bridge pcibus 0 on motherboard pci0: PCI bus on pcib0 agp0: Intel 82443LX (440 LX) host to PCI bridge mem 0xf000-0xf7ff at de vice 0.0 on pci0 pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: display, VGA at device 0.0 (no driver attached) isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0xffa0-0xffaf,0x376,0x170-0x177,0x3 f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: serial bus, USB at device 7.2 (no driver attached) piix0: PIIX Timecounter port 0xfcb0-0xfcbf at device 7.3 on pci0 Timecounter PIIX frequency 3579545 Hz quality 0 ed0: NE2000 PCI Ethernet (RealTek 8029) port 0xef40-0xef5f irq 11 at device 12. 0 on pci0 ed0: [GIANT-LOCKED] ed0: Ethernet address: 00:80:c8:dd:2d:a2 ed0: if_start running deferred for Giant type NE2000 (16 bit) de0: Digital 21140A Fast Ethernet port 0xec80-0xecff mem 0xfebfff80-0xfebf irq 10 at device 13.0 on pci0 de0: [GIANT-LOCKED] de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0 de0: Ethernet address: 00:e0:29:00:df:0d de0: if_start running deferred for Giant cpu0 on motherboard cpu1 on motherboard orm0: ISA Option ROM at iomem 0xc-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x64,0x60 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: Enhanced floppy controller at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: 1440-KB 3.5 drive on fdc0 drive 0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 ep0: 3Com 3C509-TPO EtherLink III at port 0x350-0x35f irq 5 on isa0 ep0: Ethernet address: 00:50:04:a3:35:62 unknown: PNP0303 can't assign resources (port) unknown: PNP0c02 can't assign resources (port) unknown: PNP0700 can't assign resources (port) Timecounters tick every 1.000 msec ad0: 3093MB FUJITSU MPB3032ATU E/4010 [6704/15/63] at ata0-master UDMA33 ad2: 4125MB FUJITSU MPC3043AT/6018 [8940/15/63] at ata1-master UDMA33 SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad0s1a de0: enabling Full Duplex 100baseTX port IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled de0: enabling 100baseTX port ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to
Re: Ports collection problems...help???
Brian McCann [EMAIL PROTECTED] writes: Hi all. I'm having problems with my ports collection on a 4.10 server. I need to keep the versions of the ports the same on these two boxes (for dev reasons), so I rsync'd /usr/ports...and on the target machine, I get the following error when I try to build something: Makefile error: There is a COMMENTFILE in this port. COMMENTFILEs have been deprecated in favor of COMMENT variables. Please, rectify this. *** Error code 1 But...there are no files with COMMENTFILE in their name on the system! Help?!?! If I recall correctly, pkg-comment is the filename you should look for. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
squid + antivirus plugin
Hello freebsd-questions, I have a problem to scan all http proxy traffic for a viruses. Does exist some open source antivirus plugin for squid? I have been checked the ports collection and I can't find any solution. With best regards, [MCP, MCSD] Vyacheslav mailto:[EMAIL PROTECTED] Origin: --= DVG_Lab =-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Ports collection problems...help???
Thanks! On 19 Apr 2005 10:41:16 -0400, Lowell Gilbert [EMAIL PROTECTED] wrote: Brian McCann [EMAIL PROTECTED] writes: Hi all. I'm having problems with my ports collection on a 4.10 server. I need to keep the versions of the ports the same on these two boxes (for dev reasons), so I rsync'd /usr/ports...and on the target machine, I get the following error when I try to build something: Makefile error: There is a COMMENTFILE in this port. COMMENTFILEs have been deprecated in favor of COMMENT variables. Please, rectify this. *** Error code 1 But...there are no files with COMMENTFILE in their name on the system! Help?!?! If I recall correctly, pkg-comment is the filename you should look for. -- _-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_-=-_ Brian McCann Systems Network Administrator, K12USA I don't have to take this abuse from you -- I've got hundreds of people waiting to abuse me. -- Bill Murray, Ghostbusters ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: squid + antivirus plugin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 19 Apr 2005, Vyacheslav Druzhinin wrote: Hello freebsd-questions, I have a problem to scan all http proxy traffic for a viruses. Does exist some open source antivirus plugin for squid? I have been checked the ports collection and I can't find any solution. Hi, you should take a look at squid-vscan http://www.openantivirus.org/projects.php SquidFilter http://sites.inka.de/~bigred/devel/squid-filter.html I haven't tried any of these patchsets and they are not up to date with the current squid versions. Joerg - -- The beginning is the most important part of the work. -Plato -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (FreeBSD) iD8DBQFCZSEaSPOsGF+KA+MRAscxAJ46PhokJuKIOKaDL9nbmvzv96sEbACfS8Du kWGDkojrxb56FxbiXnQU4yw= =L2Jl -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: which interface: mountd,rpcbind
On Mon, Apr 18, 2005 at 09:09:36AM -0400, Lowell Gilbert wrote: Florian Hengstberger [EMAIL PROTECTED] writes: Hi! I really worry about that it seems (man mountd, man rpcbind) impossible to specifiy the interface these daemons bind to. I've had exactly the same problem a while ago! The important thing here, is that nfsd doesn't bind to INADDR_ANY. The other daemons are still potentially vulnerable to other kinds of attacks though, but it would be extremely difficult to inject NFS RPCs into this system from an external interface. I wished rpcbind and mountd (and rpc.lockd and rpc.statd!) could be configured to listen on a specific interface. As long as that is not implemented, you should really use pf or another packet filter on your external interface, to protect NFS. You can't, as far as I can see. Looks like it would be an afternoon's work to add it in, but I wouldn't think it's worth worrying about it. Yes please, it would be really nice to have this in the source. If I knew more sockets API, I would have already submitted a PR for this, but I don't :(. It's just a matter of adding calls to bind(2) at the right places. Since you bind to an address already, a packet filter firewall will protect you from access on the wrong interface. Hmmm, rpcbind, mountd, rpc.lockd and rpc.statd bind to INADDR_ANY, not to a specific interface. rpcbind has even a documented -h flag, that it doesn't seem to respect fully. That's exactly the problem. Regards, -cpghost. -- Cordula's Web. http://www.cordula.ws/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Startup scripts question
--On Monday, April 18, 2005 08:05:37 PM -0700 Joshua Lewis [EMAIL PROTECTED] wrote: How do startup scripts work? I added: mysql_enable=²YES² But I don¹t think it is working. I had rebooted my system the other day and my mail server stopped working (postfix reading from mysql tables) and I tried looking at my running processes: ps ax |grep sql Did you look in /var/log/messages for any errors? Did you look in dmesg.boot? and nothing was returned. So I guessed mysql was not running. I tried: mysql start That won't work. Look at the startup script and you'll see why. and I got a socket error. I usually get this error when SQL was not started properly. So I ran /usr/local/etc/rc.d/mysql-server.sh start And low and behold it was all working. Sounds like something is preventing it from starting properly during the boot process. So how do startup scripts work. Did I add the wrong value to my /etc/rc.conf file? Or did I miss something somewhere? Does the entry in /etc/rc.conf correlate to the startup script. Should I change my rc.conf file to read mysql-server_enable=²YES² No. mysql_enable=YES is the correct value. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer The University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't build ports on older FreeBSD machine
--On Monday, April 18, 2005 10:22:13 PM -0600 Brett Glass [EMAIL PROTECTED] wrote: At 10:16 PM 4/18/2005, Kris Kennaway wrote: The ports support policy is right there on www.freebsd.org/ports for all to read. It's not reasonable, IMHO. If a release hasn't been EOLed, ports should work on it. That's kind of silly, don't you think? As new software is developed and added to ports, why would there be *any* expectation that it would work on older releases? Do you honestly think a developer is going to test - say - usb drivers on a FBSD release that never had usb? You can keep old versions around forever if all you want to do is run what's on them, but if you want the latest and greatest of everything, the *OS* has to be new as well. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer The University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: what kind of BBS software on freebsd work well
--On Tuesday, April 19, 2005 08:39:46 AM -0400 Brian McCann [EMAIL PROTECTED] wrote: I would just use phpbb...it's a snap to setup, and doesn't take much to manage. And has more security problems than Carter has liver pills Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer The University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gmirror losing drive
On Tue, 19 Apr 2005 14:38:33 +0200, Andrea Venturoli [EMAIL PROTECTED] wrote: Danny Howard wrote: I'm not entirely sure on this one ... you have RTFM? Obviously. I started with the tutorial at http://people.freebsd.org/~rse/mirror/, but I read the whole manual before setting it up. There's gmirror configure -a ... but that is about synchronization. Yes, and synchronization works fine. What does gmirror info says before you forget / insert? Hm, I'd have to reboot. Right now it says: Geom name: gm0 State: COMPLETE Components: 2 Balance: split Slice: 2048 Flags: NONE SyncID: 5 ID: 2253479574 Providers: 1. Name: mirror/gm0 Mediasize: 36778544640 (34G) Sectorsize: 512 Mode: r3w3e2 Consumers: 1. Name: da1 Mediasize: 36778545152 (34G) Sectorsize: 512 Mode: r3w3e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 5 ID: 4069582681 2. Name: da0 Mediasize: 36778545152 (34G) Sectorsize: 512 Mode: r3w3e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 5 ID: 4172309470 Geom name: gm0.sync After a reboot I only see da1 under Consumers and State is DEGRADED (Componentis are still 2, though). My hunch is that you are not rebooting cleanly, so when the system comes up, gmirror thinks it has to re-sync the disks I would expect this behaviour, but: a) I am rebooting cleanly; b) it doesn't just need resync (that happened to me on another machine), it really loses one drive/Consumer!!! BTW: system is 5.3p9 now I've been using geom_mirror for quite a while. I currently use it on 6-CURRENT and 5.4-STABLE systems. The implementation has evolved since first I used it, and some kinks have been worked out. You may be experiencing some of these kinks. Do you have swap on your geom_mirror? In earlier versions of geom_mirror, even a clean shutdown would cause a mirror to be marked degraded if swap was still active. The fix at the time was to amend the stop_cmd in /etc/rc.d/swap1 to do an explicit swapoff -a (or similar). Later modifications rendered this explicit step unnecessary. I also remember a short window in which I experienced the same problem of losing a drive/consumer at reboot when a mirror would become degraded (in my case, due to the TIMEOUT - WRITE_DMA problems I was having with 5.x/6.x). This seemed to go away with a subsequent upgrade. So, if you are planning to upgrade when 5.4-RELEASE rolls around, you might find that these problems disappear. Otherwise, you may be stuck with at least one of them. Cheers, Paul. -- e-mail: [EMAIL PROTECTED] Without music to decorate it, time is just a bunch of boring production deadlines or dates by which bills must be paid. --- Frank Vincent Zappa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
gateway troubles
hi ! i have fbsd 5.3 router with gateway_enable=YES /etc/rc.conf and 3 interfaces: 1. xl0 (mynet) 2. rl0 3. tun0 (internet) cuaa0 i need to get work router from mynet to rl0 net and internet . i want to do that without natd but net.inet.ip.forwarding=1 work only on one psihical interface :) i need to get work gateway between 3 interfaces . what i need to do ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
exif.10 libexif-0.6.12_1
I'm trying to install an unofficial port of MythTV Gallery. It looks for exif.10 library but doesn't find it even after installing libexif-0.6.12_1. Does the port makefile need to updated or do I need to install something else to get exif.10? Thanks, Drew -- Visit The Alchemist's Warehouse Magic Tricks, DVDs, Videos, Books, More! http://www.alchemistswarehouse.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gateway troubles
Alex wrote: hi ! i have fbsd 5.3 router with gateway_enable=YES /etc/rc.conf and 3 interfaces: 1. xl0 (mynet) 2. rl0 3. tun0 (internet) cuaa0 i need to get work router from mynet to rl0 net and internet . i want to do that without natd but net.inet.ip.forwarding=1 work only on one psihical interface :) i need to get work gateway between 3 interfaces . what i need to do ? In order to route traffic between your local network and the Internet WITHOUT using NAT, then your ISP needs to assign a routeable public subnet to you as well as at least one address on a segment shared with one of their routers. Somehow, I get the feeling that this isn't the case so probably will need to use NAT. FreeBSD gives you a few choices when it comes to building a router/firewall box. As always the handbook is the best place to start: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls.html Incidentally, the handbook is available in multiple languages: http://www.freebsd.org/doc/ Good luck, -Ash ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Where is sysinstall prog on the ISO image of 5.3?
Hi: I've recompiled sysinstall b/c i want it to automatically get install.cfg ( for an autoinstall ) from the cd its on instead of a floppy. Now, I cant find out where sysinstall is on the 5.3 cd so I can replace and reburn it. Can someone help me or let me know where sysinstall is hidden on the cd? Thanks --CH ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
df question
Hi people I do df -h on my machine and got this RARE ouput %df -h Filesystem SizeUsed Avail Capacity Mounted on /dev/ad0s1a7.7G2.2G4.9G31%/ devfs 1.0K1.0K 0B 100%/dev /dev/ad0s1d 65G9.5G 50G16%/usr/home %df Filesystem 1K-blocksUsedAvail Capacity Mounted on /dev/ad0s1a 8122126 2328406 514395031%/ devfs 1 10 100%/dev /dev/ad0s1d 68372608 9940308 5296249216%/usr/home 50G+9.5G=60.5G but the partition size is 65G ... where are my ~5G,? What can i do? Thanks Osmany ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cvsup-mirror
On Tue, Apr 19, 2005 at 04:38:10PM +0400, Vyacheslav Druzhinin wrote: Hello all, I have installed ports/cvsup-mirror at defaults settings and it downloads over 3GB files on my hard drive (I guess it dowloads all releases and all ports collections). Does anyone knows how to reduce traffic if I need only fresh ports and RELENG_5_3 cvs tag available for cvsup ??? Hi, cvsup-mirror is for running your own cvsup server to distribute FreeBSD files to others. You probably just want to use cvsup with an appropriate supfile - usually based on one of the samples in /usr/share/examples/cvsup. Also see Ch 19 of the handbook for lots of details on setting this up: http://www.uk.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html Cheers, Scott -- === Scott Mitchell | PGP Key ID | Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines scott at fishballoon.org | 0xAA775B8B | -- Anon ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: df question
Hi people I do df -h on my machine and got this RARE ouput %df -h Filesystem SizeUsed Avail Capacity Mounted on /dev/ad0s1a7.7G2.2G4.9G31%/ devfs 1.0K1.0K 0B 100%/dev /dev/ad0s1d 65G9.5G 50G16%/usr/home %df Filesystem 1K-blocksUsedAvail Capacity Mounted on /dev/ad0s1a 8122126 2328406 514395031%/ devfs 1 10 100%/dev /dev/ad0s1d 68372608 9940308 5296249216%/usr/home 50G+9.5G=60.5G but the partition size is 65G ... where are my ~5G,? What can i do? Accept it :-) Or change the minimum free space on the drive. Here's the relevant part of the tunefs manpage: -m minfree Specify the percentage of space held back from normal users; the minimum free space threshold. The default value used is 8%. This value can be set to zero, however up to a factor of three in throughput will be lost over the performance obtained at a 10% threshold. Settings of 5% and less force space optimization to always be used which will greatly increase the overhead for file writes. Note that if the value is raised above the current usage level, users will be unable to allocate files until enough files have been deleted to get under the higher threshold. I haven't checked, but I suspect the FAQ and Handbook at www.freebsd.org have more information on this... -philip ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: df question
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Osmany Guirola Cruz Sent: Tuesday, April 19, 2005 5:37 AM To: freebsd-questions@freebsd.org Subject: df question Hi people I do df -h on my machine and got this RARE ouput %df -h Filesystem SizeUsed Avail Capacity Mounted on /dev/ad0s1a7.7G2.2G4.9G31%/ devfs 1.0K1.0K 0B 100%/dev /dev/ad0s1d 65G9.5G 50G16%/usr/home %df Filesystem 1K-blocksUsedAvail Capacity Mounted on /dev/ad0s1a 8122126 2328406 514395031%/ devfs 1 10 100%/dev /dev/ad0s1d 68372608 9940308 5296249216%/usr/home 50G+9.5G=60.5G but the partition size is 65G ... where are my ~5G,? What can i do? Thanks Osmany - Hi, That output is far from rare! Type man tunefs and type /-m without the quotes, and then hit n without the quotes. Read that section carefully. Also, some space is used in any file system for storage of data about the data (metadata). Inodes, superblocks, etc all take up space. Reading man tuning may also shed some light on this supposedly lost space. Thanks, Andrew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: df question
On Tuesday, April 19, 2005, at 08:36AM, Osmany Guirola Cruz [EMAIL PROTECTED] wrote: 50G+9.5G=60.5G but the partition size is 65G ... where are my ~5G,? http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/disks.html#MANUFACTURER-DISK-SIZE ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: what kind of BBS software on freebsd work well
Paul Schmehl wrote: --On Tuesday, April 19, 2005 08:39:46 AM -0400 Brian McCann [EMAIL PROTECTED] wrote: I would just use phpbb...it's a snap to setup, and doesn't take much to manage. And has more security problems than Carter has liver pills Hmm, what would a FreeBSDer advise as a forum engine? IPB for $55? Best wishes, Andrew P. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: [freebsd-questions] Turn off monitor
Lowell Gilbert wrote: On the (syscons(4)) console, you can enable screen blanking as a screensaver in its own right. You would load either the green or apm screen saver (available as kernel modules) and enable it with vidcontrol(1). I don't think you can trigger it by hand. I tried both (before posting the question) - green_saver just blanks the screen (doesn't turn it off), and apm_server misbehaves - just 'freezes' the screen without any other effect. I know turning it off works because, well, it works ok in Windows... Under X, of course, doing what you want it easy. Turn the monitor off? How? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: df question
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Osmany Guirola Cruz Sent: Tuesday, April 19, 2005 5:37 AM To: freebsd-questions@freebsd.org Subject: df question Hi people I do df -h on my machine and got this RARE ouput %df -h Filesystem SizeUsed Avail Capacity Mounted on /dev/ad0s1a7.7G2.2G4.9G31%/ devfs 1.0K1.0K 0B 100%/dev /dev/ad0s1d 65G9.5G 50G16%/usr/home %df Filesystem 1K-blocksUsedAvail Capacity Mounted on /dev/ad0s1a 8122126 2328406 514395031%/ devfs 1 10 100%/dev /dev/ad0s1d 68372608 9940308 5296249216%/usr/home 50G+9.5G=60.5G but the partition size is 65G ... where are my ~5G,? What can i do? This is well documented and has all been covered numerous and numerous times in the list. Basically, a percentage of the disk is held out for the system (root). The default is 8% but it can be configured. Some searching will get you more detailed explanations. jerry Thanks Osmany ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: [freebsd-questions] Turn off monitor
Ivan Voras wrote: Lowell Gilbert wrote: On the (syscons(4)) console, you can enable screen blanking as a screensaver in its own right. You would load either the green or apm screen saver (available as kernel modules) and enable it with vidcontrol(1). I don't think you can trigger it by hand. I tried both (before posting the question) - green_saver just blanks the screen (doesn't turn it off), and apm_server misbehaves - just 'freezes' the screen without any other effect. I know turning it off works because, well, it works ok in Windows... Under X, of course, doing what you want it easy. Turn the monitor off? How? Hmm, from XF86Config(5): Options Some Option flags that may be useful to include in Monitor sec- tions (when needed) include DPMS, and SyncOnGreen. Now, I have: Option DPMS in /etc/X11/XF86Config, and my monitor does what I call sleeping after a period of inactivity, but I can't say how this really coincides with the current discussion, as I'm jumping in mid-stream and can't even seem to find Lowell's reply to you anywhere (other than what you quoted). Hmm, what about acpi(4) ? HTH, Kevin Kinsey ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gateway troubles
Ash wrote: Alex wrote: hi ! i have fbsd 5.3 router with gateway_enable=YES /etc/rc.conf and 3 interfaces: 1. xl0 (mynet) 2. rl0 3. tun0 (internet) cuaa0 i need to get work router from mynet to rl0 net and internet . i want to do that without natd but net.inet.ip.forwarding=1 work only on one psihical interface :) i need to get work gateway between 3 interfaces . what i need to do ? In order to route traffic between your local network and the Internet WITHOUT using NAT, then your ISP needs to assign a routeable public subnet to you as well as at least one address on a segment shared with one of their routers. Somehow, I get the feeling that this isn't the case so probably will need to use NAT. FreeBSD gives you a few choices when it comes to building a router/firewall box. As always the handbook is the best place to start: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls.html Incidentally, the handbook is available in multiple languages: http://www.freebsd.org/doc/ I've left Ash's info in, since a pointer to the handbook is always a Good Thing(tm) in the best of FreeBSD's traditions... I notice your WAN link is tun0 ... are you using userland ppp(8)? Because ppp has a -nat switch and, AFAIK, it doesn't care where else on the box your packets are coming from. I use ppp -nat -background myisp to call ppp and everybody gets along fine ... except for the low bandwidth... :-( HTH, Kevin Kinsey ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Exabyte 221L Auto Loader
Is there anyone using this device with FreeBSD 4.x or 5.x? I'm new to the world of auto-loaders and am curious if FreeBSD's tar / dump utilities can support it properly for backing up of 3tb of data from various partitions. If so, are there any specifics that I should be aware of when using this device? Any recommendations on using other software other than tar or dump to do this that are available in the ports tree? Thanks. -- Micheal Patterson Senior Communications Systems Engineer 405-917-0600 Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Exabyte 221L Auto Loader
Hi Michael! Is there anyone using this device with FreeBSD 4.x or 5.x? I'm new to the world of auto-loaders and am curious if FreeBSD's tar / dump utilities can support it properly for backing up of 3tb of data from various partitions. If so, are there any specifics that I should be aware of when using this device? Any recommendations on using other software other than tar or dump to do this that are available in the ports tree? rsync and rsnapshot are alternatives - I particularly like the second one as it provides a kind of incremental backup (you can have several snapshots of the same file, what can be handy to retrieve an old version of a file after a deadly edit without having the sysadmin fiddle with tapes...) Regarding tar, make sure you don't save a huge file on an ext2fs file system. I did this mistake once on a machine that was shared between FreeBSD and Linux and I've lost a significant amount of data: ext2fs does not support files of more than 4GB (compressing the archive does not shift the threshold - data will be lost before this). UFS2 is the way to go: the inodes management is not quite as efficient from a disk usage point of view but for huge disks, it will bring you peace of mind, which is priceless. Hope it helps -- Olivier Gautherot [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Ports collection problems...help???
On Tue, Apr 19, 2005 at 10:41:16AM -0400, Lowell Gilbert wrote: Brian McCann [EMAIL PROTECTED] writes: Hi all. I'm having problems with my ports collection on a 4.10 server. I need to keep the versions of the ports the same on these two boxes (for dev reasons), so I rsync'd /usr/ports...and on the target machine, I get the following error when I try to build something: Makefile error: There is a COMMENTFILE in this port. COMMENTFILEs have been deprecated in favor of COMMENT variables. Please, rectify this. *** Error code 1 But...there are no files with COMMENTFILE in their name on the system! Help?!?! If I recall correctly, pkg-comment is the filename you should look for. This means that you're not syncing the ports properly, e.g. you're not using rsync --delete. Kris pgpucfAouI6sP.pgp Description: PGP signature
Re: gmirror losing drive
Andrea, I have no idea, sorry, but I do notice that your gmirror list looks somewhat different from mine, so I'll include that output, in case we might learn something. I wish you all the best in cracking this nut ... :/ On Tue, Apr 19, 2005 at 02:38:33PM +0200, Andrea Venturoli wrote: Geom name: gm0 State: COMPLETE Components: 2 Balance: split Slice: 2048 Flags: NONE SyncID: 5 ID: 2253479574 Providers: 1. Name: mirror/gm0 Mediasize: 36778544640 (34G) Sectorsize: 512 Mode: r3w3e2 Consumers: 1. Name: da1 Mediasize: 36778545152 (34G) Sectorsize: 512 Mode: r3w3e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 5 ID: 4069582681 2. Name: da0 Mediasize: 36778545152 (34G) Sectorsize: 512 Mode: r3w3e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 5 ID: 4172309470 Geom name: gm0.sync Geom name: gm0 State: COMPLETE Components: 2 Balance: round-robin Slice: 4096 Flags: NONE SyncID: 2 ID: 21500713 Providers: 1. Name: mirror/gm0 Mediasize: 250059349504 (233G) Sectorsize: 512 Mode: r7w7e2 Consumers: 1. Name: ad4 Mediasize: 250059350016 (233G) Sectorsize: 512 Mode: r7w7e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 2 ID: 107796709 2. Name: ad6 Mediasize: 250059350016 (233G) Sectorsize: 512 Mode: r7w7e3 State: ACTIVE Priority: 0 Flags: DIRTY SyncID: 2 ID: 3458394720 Geom name: gm0.sync ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gmirror on local + nfs volume
Feczak Szabolcs wrote: I have read about this some months ago on the list, but I can not find it now. Can someone explain how to make a Geom mirror with one local and one remote component ? (so basicly syncronize two volumes between machines automagically) Feczak, I saw that too ... my searching turns up: man -k ggate Good luckl making it go. Sincerely, -danny -- http://dannyman.toldme.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error starting opera 8.00
Hey, I downloaded opera 8.00, extracted the .tar.gz and ran the install.sh script, all the files were copied to the right places. When I tried to run opera I first had to symlink 2 libs ( libm.so.2 and libc_r.so.4 ) that wasn't much of a problem but when I try to run it now I get this error: [EMAIL PROTECTED] opera /usr/libexec/ld-elf.so.1: /usr/X11R6/lib/libX11.so.6: Undefined symbol __stderrp I am running FreeBSD 5.3. Anyone an Idea what I am doing wrong ? Thanks Frank ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: which interface: mountd,rpcbind
On Tue, 19 Apr 2005 17:35:56 +0200, [EMAIL PROTECTED] said: On Mon, Apr 18, 2005 at 09:09:36AM -0400, Lowell Gilbert wrote: Florian Hengstberger [EMAIL PROTECTED] writes: Hi! I really worry about that it seems (man mountd, man rpcbind) impossible to specifiy the interface these daemons bind to. I've had exactly the same problem a while ago! The important thing here, is that nfsd doesn't bind to INADDR_ANY. The other daemons are still potentially vulnerable to other kinds of attacks though, but it would be extremely difficult to inject NFS RPCs into this system from an external interface. I wished rpcbind and mountd (and rpc.lockd and rpc.statd!) could be configured to listen on a specific interface. As long as that is not implemented, you should really use pf or another packet filter on your external interface, to protect NFS. In addition, tcpwrappers can be used to further protect NFS. Sandy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Cvsup problems
I'm having cvsup update issues right now. When I try to update I get: Cannot connect to cvsupxx.us.freebsd.org: Connection refused Will retry at xx:xx:xx No matter which server I try. Also when I try to run fastest_cvsup -c us I get timeouts on everyserver. Any ideas? Cody ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cvsup problems
On Tue, Apr 19, 2005 at 02:03:46PM -0500, Cody Holland wrote: I'm having cvsup update issues right now. When I try to update I get: Cannot connect to cvsupxx.us.freebsd.org: Connection refused Will retry at xx:xx:xx No matter which server I try. Also when I try to run fastest_cvsup -c us I get timeouts on everyserver. Any ideas? You have a firewall in the way? Kris pgp6WHEkBaOkU.pgp Description: PGP signature
Re: IRQ problems b/n USB and PCI modem... help! (SOLVED)
So, after getting some pointers from folks (thanks!) I started from scratch this morning twiddling one BIOS setting at a time. Turns out that it's *NOT* the USB controller. Well, maybe it is, I don't really know I guess. By turning off Power Management in the BIOS, I can access all three modems just fine. Strange, but I'm glad it's working :) Thanks all! On Mon, 18 Apr 2005, Philip Hallstrom wrote: Hi all - I am in IRQ h*ll. I'm trying to setup an box to use as an inbound modem server... Here's what's happening... FreeBSD 4.9 Dell Dimension XPS T450 (ie. several year old dell). Default BIOS settings (switching the PnP OS has no effect). One NIC recognized as fxp0. One IDE drive, one cdrom, one floppy. Three USR 5610B PCI modems (which work fine individually). I can access the first two modems via tip, but tipping to the last one locks up the entire system (network, console, everything). Here's the relevant parts from /var/run/dmesg.boot: pci1: 3Dfx Voodoo 3 graphics accelerator at 0.0 irq 11 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: Intel 82371AB/EB (PIIX4) USB controller at 7.2 irq 9 fxp0: Intel 82559 Pro/100 Ethernet port 0x1000-0x103f mem 0xf400-0xf40f,0xf410-0xf4100fff irq 11 at device 13.0 on pci0 sio0: 3COM PCI FaxModem port 0x1070-0x1077 irq 10 at device 14.0 on pci0 sio0: moving to sio4 sio4: type 16550A sio0: 3COM PCI FaxModem port 0x1078-0x107f irq 7 at device 15.0 on pci0 sio0: moving to sio5 sio5: type 16550A sio0: 3COM PCI FaxModem port 0x1080-0x1087 irq 9 at device 16.0 on pci0 sio0: moving to sio6 sio6: type 16550A fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A I am pretty sure my problem is that the USB controller and the third modem are both using IRQ 9, but I can't think of any way to resolve that. I don't have USB compiled into my kernel and there aren't any settings in the BIOS to shut USB off completely. I've also tried killing off sio0/IRQ4 in hopes the modem would take that IRQ, but no luck there either. Anyone have any ideas on how I can get this to work? Should I try FreeBSD 5.x? Thanks all! -philip ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
matrox parhelia and hauppauge pvr350 questions
Hi, I would like to migrate my main workstation from windowsxp to freebsd 5.4-stable (I run a few free- and openbsd machines on a few servers and a laptop) I use a matrox parhelia 128mb (dual DVI) agp card which is connected to 2 LCD screens. I also run a Hauppauge PVR350 TV card to watch TV on my PC. I've a few questions: 1) Does someone run a matrox parhelia in Xorg 6.8.2 with freebsd5.x, what's your comment on it? 2) Is multi-screen (Xinerama) working with this card? 3) Is someone using hauppauge pvr350 TV card to watch tv in freebsd? 4) Is tv watching with the pvr somewhat user-friendly? Many many thanks for taking the time to respond Didier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
dual-dvi graphic adapter, which one
Hi, I'm planning to buy a new graphic adapter, which should fulfill a few conditions. a) dual-dvi output b) no fan (well yes, it needs to be silent) c) fast 3d acceleration NOT required d) tv-out not required e) cheap ;-)) f) tending to a NVIDIA adapter because of their freebsd support Is someone using such a card, if so, which one? Many thx Didier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: [freebsd-questions] Turn off monitor
Kevin Kinsey wrote: Option DPMS Ok, this works! Also, with command xset dpms force off I can turn it off at will. Now only to find something for the (text) console... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Audigy Sound Card -- SOLVED
On 4/18/2005 4:31 PM Drew Tomlinson wrote: I'm trying to get my Audigy sound card working. I've followed the instructions in the Handbook and used 'kldload snd_emu10k1'. My card is detected but something isn't right: pcm0: Creative Audigy (EMU10K2) irq 9 at device 9.0 on pci0 pcm0: 0x20 bytes of rid 0x10 res 4 failed. pcm0: unable to map register space device_attach: pcm0 attach returned 6 Also, there is no /dev/dsp and /dev/sndstat shows no installed devices. Can anyone tell me if I'm on the right track and what pcm0: 0x20 bytes of rid 0x10 res 4 failed means? This is a FreeBSD 5.4-STABLE #2: Sat Apr 16 15:53:56 PDT 2005 system. I resolved this issue by opening up the case and re-seating the card. Seems when I screwed the bracket in, it pulled the card out of the slot. A pair of pliers and a slight modification to the case fixed this problem. Sound card works much better now that it's properly installed. :) Drew -- Visit The Alchemist's Warehouse Magic Tricks, DVDs, Videos, Books, More! http://www.alchemistswarehouse.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
msdosfs fat32 disk size limit in FreeBSD?
Hello, Is there an upper limit to the size of a FAT32 file system in the FreeBSD msdosfs code? I put in an 80GB drive recently and there have been problems. There is no problem with small FAT32 file systems on floppies or flash memory cards. Any useful comments before I go back to the (working) 60GB drive configuration? Thanks, Brian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Reasons not being able to FXP?
Hey! I'm on a FreeBSD 4.11-RELEASE jail. I've setup ftpd on port 21 from /etc/inetd.conf. Its portrange according to the firewall is in the clear. People can connect, but they cannot FXP using FlashFXP in Windows. Does anyone know why they can't? I'm all out of ideas. Thank you, Fafa -- ___ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
another newbie question
Hi all, Been playing around with FreeBSD for a couple of months. Just configured my .muttrc, and I'm able to send messages but not to receive. I read the man pages and followed the instructions but still it's not working. Am I missing something here? Any help will be greatly appreciated. Thx P.S. Kinda embarrased of asking such a question in this mailing list...:-) -- Ricardo Ricardo [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gmirror on local + nfs volume
On Tue, 19 Apr 2005 16:07:29 +0200, Feczak Szabolcs [EMAIL PROTECTED] wrote: I have read about this some months ago on the list, but I can not find it now. Can someone explain how to make a Geom mirror with one local and one remote component ? (so basicly syncronize two volumes between machines automagically) I don't know about NFS, but I remember someone doing something similar to what you describe using geom_gate for the remote component. See ggated(8) and ggatec(8) for how to set up an use a geom_gate provider. Geom_mirror works with GEOM providers, and I don't believe NFS fulfills this requirement. So, it's unlikely that geom_mirror with a NFS component would be possible. Note that the geom_mirror + geom_gate synchronisation would be one-way. Cheers, Paul. -- e-mail: [EMAIL PROTECTED] Without music to decorate it, time is just a bunch of boring production deadlines or dates by which bills must be paid. --- Frank Vincent Zappa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: msdosfs fat32 disk size limit in FreeBSD?
Brian M. Kincaid wrote: Hello, Is there an upper limit to the size of a FAT32 file system in the FreeBSD msdosfs code? I put in an 80GB drive recently and there have been problems. There is no problem with small FAT32 file systems on floppies or flash memory cards. Any useful comments before I go back to the (working) 60GB drive configuration? Thanks, Brian IANAE, but I think there is; IIRC, though, it's 128 GB unless you have compiled MSDOSFS_LARGE* into your custom kernel, so I can't address your problem with an 80GB disk What system are you on (`uname -a`)? Kevin Kinsey *Or something like that ... check release notes on 5.3, again, that's if I recall correctly ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: squid + antivirus plugin
Hi, On Tue, 2005-04-19 at 19:01 +0400, Vyacheslav Druzhinin wrote: Hello freebsd-questions, I have a problem to scan all http proxy traffic for a viruses. Does exist some open source antivirus plugin for squid? I have been checked the ports collection and I can't find any solution. With best regards, [MCP, MCSD] Vyacheslav mailto:[EMAIL PROTECTED] Origin: --= DVG_Lab =-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Check out http://www.clamav.net/3rdparty.html and find Web/FTP Proxy + ClamAV on the pages and it will list several of the type of programs that you are looking for. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: NATD server problem on 5.3 ?
And I would like to add these questions to On Tue, 2005-04-19 at 07:44 -0400, [EMAIL PROTECTED] wrote: Saying it's not working is way to vague. You need to post more details about what is not working. Like can the 5.3 server ping the public internet? Can it ping PCs on the LAN? Can a win LAN PC ping the server? What does the firewall log contain? Does nat start up? do a ps -ax |grep nat Are you sure your natd.conf is correctly formatted? Have you tested with firewall out of the way by having only single rule to pass all packets? /sbin/ipfw -f flush /sbin/ipfw add allow all from any to any Generally if it is your first firewall try the rc.conf option of firewall_type=OPEN and here is what my /etc/natd.cf looks like. ##/etc/natd.cf log yes deny_incoming no use_sockets yes same_ports yes verbose no port8668 interface ep0 unregistered_only yes ##EOF -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of faisal gillani Sent: Tuesday, April 19, 2005 4:08 AM To: freebsd-questions@freebsd.org Subject: NATD server problem on 5.3 ? Well i recently installed my first natd server on freebsd 5.3, but its not working ? here is wat i did .. 1. compiles kernal with the following options options IPFIREWALL options IPV6FIREWALL options IPDIVERT 2. made the following entries in rc.conf defaultrouter=10.0.0.1 gateway_enable=YES hostname=natserver ifconfig_fxp0=inet 192.168.0.1 netmask 255.255.255.0 ifconfig_xl0=inet 10.0.0.5 netmask 255.255.255.0 firewall_enable=yes natd_enable=yes natd_interface=xl0 natd_flags=-f /etc/natd.conf 3. made the following entries in rc.firewall /sbin/ipfw -f flush /sbin/ipfw add allow all from any to any via fxp0 /sbin/ipfw add allow icmp from any to any out via xl0 /sbin/ipfw add allow all from any to any via lo0 /sbin/ipfw add divert natd ip from any to any via xl0 /sbin/ipfw add allow ip from any to 10.0.0.5 in recv xl0 /sbin/ipfw add allow ip from 10.0.0.5 to any out xmit xl0 4. configure the windows clients as follows ipaddress = 192.168.0.3 subnet = 255.255.255.0 gateway = 192.168.0.1 dns server = 192.168.0.2 dns server capable of resolving internet local address this is all that i have done but still interet is not working on clients , what should i do now ? *:$., 88,.$:*(((*$ Allah-hu-Akber*:$., 88,.$:*((*$ God is the Greatest __ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: msdosfs fat32 disk size limit in FreeBSD?
Yeah, I already had MSDOSFS_LARGE turned on, and I realize that it's supposed to be an issue if you have bigger than 128GB drives. I'm running 6.0-CURRENT. I'll keep looking... Brian Kevin Kinsey wrote: Brian M. Kincaid wrote: Hello, Is there an upper limit to the size of a FAT32 file system in the FreeBSD msdosfs code? I put in an 80GB drive recently and there have been problems. There is no problem with small FAT32 file systems on floppies or flash memory cards. Any useful comments before I go back to the (working) 60GB drive configuration? Thanks, Brian IANAE, but I think there is; IIRC, though, it's 128 GB unless you have compiled MSDOSFS_LARGE* into your custom kernel, so I can't address your problem with an 80GB disk What system are you on (`uname -a`)? Kevin Kinsey *Or something like that ... check release notes on 5.3, again, that's if I recall correctly ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: msdosfs fat32 disk size limit in FreeBSD?
Maybe I should turn MSDOSFS_LARGE **OFF** ? I'll keep you posted. Brian Kevin Kinsey wrote: Brian M. Kincaid wrote: Hello, Is there an upper limit to the size of a FAT32 file system in the FreeBSD msdosfs code? I put in an 80GB drive recently and there have been problems. There is no problem with small FAT32 file systems on floppies or flash memory cards. Any useful comments before I go back to the (working) 60GB drive configuration? Thanks, Brian IANAE, but I think there is; IIRC, though, it's 128 GB unless you have compiled MSDOSFS_LARGE* into your custom kernel, so I can't address your problem with an 80GB disk What system are you on (`uname -a`)? Kevin Kinsey *Or something like that ... check release notes on 5.3, again, that's if I recall correctly ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gmirror losing drive
Paul Mather wrote: Do you have swap on your geom_mirror? Yes. In earlier versions of geom_mirror, even a clean shutdown would cause a mirror to be marked degraded if swap was still active. The fix at the time was to amend the stop_cmd in /etc/rc.d/swap1 to do an explicit swapoff -a (or similar). Later modifications rendered this explicit step unnecessary. Yes, that hit me too (on another machine), but it would render a disk stale, it would not become lost. I also remember a short window in which I experienced the same problem of losing a drive/consumer at reboot when a mirror would become degraded (in my case, due to the TIMEOUT - WRITE_DMA problems I was having with 5.x/6.x). This seemed to go away with a subsequent upgrade. Hmm, this might be it, altough I'm usinc SCIS, so no DMA stuff... So, if you are planning to upgrade when 5.4-RELEASE rolls around, you might find that these problems disappear. I am planning to do that as soon as it's released. I hope it will help. bye Thanks av. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problem linking MySQL 4.1.11 via FreeBSD 4.10 ports
I am having a problem building from ports, which is a fairly rare experience for me. When I try to make the current port of the MySQL 4.1 server under FreeBSD 4.10, I get a huge stream of undefined reference errors at the link step for mysqld. It would seem it can't find any thread-related library references, e.g. `mutex_enter_func', regardless of which thread library I request. I started out trying to build with the default pthreads library, then switched to the Linuxthreads library as it's supposed to have better performance under 4.x anyway. I've checked my environment for a messed up LD_CONFIG_PATH, have rerun ldconfig (numerous times) and have checked the threads libraries created using ldd. I can see the lthread library being referenced on the command line. Factoids: * Running FreeBSD 4.10 on a development-only server (thank goodness.) * The ports tree was CVSupped late last week (4/14/2005) * Trying to build MySQL version 4.1.11 from /usr/ports/databases/mysql41-server/ * linuxthreads-2.2.3_16 built and installed yesterday, did not resolve the problem * Problem seen (with different variable names) both with and without the WITH_LINUXTHREADS=yes parameter to make. * gcc 2.95.4 (system version), libtool-1.5.10_1 (from ports) * I've built about 10 other packages from ports into binary packages in the last few days, with no similar problems. * I've tried switching to a regular root shell via su, to make sure it's not a sudo environment problem, even though my other port makes work from sudo. * I've repeatedly done a make clean to make sure that I don't have configuration cruft. $ cc -v Using builtin specs. gcc version 2.95.4 20020320 [FreeBSD] $ head -4 /var/run/dmesg.boot | tail -1 FreeBSD 4.10-RELEASE #0: Tue Jun 22 17:01:51 HST 2004 $ head Makefile # New ports collection makefile for:MySQL-server # Date created: Fri Apr 11 10:06:26 CET 2003 # Whom: Alex Dupre [EMAIL PROTECTED] # # $FreeBSD: ports/databases/mysql41-server/Makefile,v 1.206 2005/04/12 03:25:02 obrien Exp $ # PORTNAME?= mysql PORTVERSION=4.1.11 PORTREVISION?= 1 $ sudo make FORCE_PKG_REGISTER=yes WITH_LINUXTHREADS=yes ... Making all in share /usr/local/bin/libtool15 --preserve-dup-deps --mode=link cc -DDBUG_OFF -DNEWSA LT -D__USE_UNIX98 -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include/pthread/linu xthreads -DNEWSALT -D__USE_UNIX98 -D_REENTRANT -D_THREAD_SAFE -I/usr/local/incl ude/pthread/linuxthreads -felide-constructors -fno-rtti -fno-exceptions -fno-i mplicit-templates -fno-exceptions -fno-rtti -DMYSQLD_NET_RETRY_COUNT=100 -o mysqld sql_lex.o sql_handler.o item.o item_sum.o item_buff.o item_func.o i tem_cmpfunc.o item_strfunc.o item_timefunc.o thr_malloc.o item_create.o item_ subselect.o item_row.o item_geofunc.o field.o strfunc.o key.o sql_class.o sql_ list.o net_serv.o protocol.o sql_state.o lock.o my_lock.o sql_string.o sql_ma nager.o sql_map.o mysqld.o password.o hash_filo.o hostname.o set_var.o sql_par se.o sql_yacc.o sql_base.o table.o sql_select.o sql_insert.o sql_prepare.o sql _error.o sql_update.o sql_delete.o uniques.o sql_do.o procedure.o item_uniq.o sql_test.o log.o log_event.o init.o derror.o sql_acl.o unireg.o des_key_file. o discover.o time.o opt_range.o opt_sum.o records.o filesort.o handler.o ha_h eap.o ha_myisam.o ha_myisammrg.o ha_berkeley.o ha_innodb.o ha_isam.o ha_isammr g.o ha_ndbcluster.o sql_db.o sql_table.o sql_rename.o sql_crypt.o sql_load.o m f_iocache.o field_conv.o sql_show.o sql_udf.o sql_analyse.o sql_cache.o slave. o sql_repl.o sql_union.o sql_derived.o client.o sql_client.o mini_client_error s.o pack.o stacktrace.o repl_failsafe.o gstream.o spatial.o sql_help.o protoc ol_cursor.o tztime.o my_time.o ha_example.o ha_archive.o ha_tina.o ha_blackhol e.o -L../bdb/build_unix -ldb ../innobase/usr/libusr.a ../innobase/srv/libsrv.a ../innobase/dict/libdict.a ../innobase/que/libque.a ../innobase/srv/libsrv.a ../ innobase/ibuf/libibuf.a ../innobase/row/librow.a ../innobase/pars/libpars.a ../i nnobase/btr/libbtr.a ../innobase/trx/libtrx.a ../innobase/read/libread.a ../inno base/usr/libusr.a ../innobase/buf/libbuf.a ../innobase/ibuf/libibuf.a ../innobas e/eval/libeval.a ../innobase/log/liblog.a ../innobase/fsp/libfsp.a ../innobase/f ut/libfut.a ../innobase/fil/libfil.a ../innobase/lock/liblock.a ../innobase/mtr/ libmtr.a ../innobase/page/libpage.a ../innobase/rem/librem.a ../innobase/thr/lib thr.a ../innobase/sync/libsync.a ../innobase/data/libdata.a ../innobase/mach/lib mach.a ../innobase/ha/libha.a ../innobase/dyn/libdyn.a ../innobase/mem/libmem.a ../innobase/sync/libsync.a ../innobase/ut/libut.a ../innobase/os/libos.a ../inno base/ut/libut.a ../myisam/libmyisam.a ../myisammrg/libmyisammrg.a ../heap/ libheap.a ../vio/libvio.a ../mysys/libmysys.a ../dbug/libdbug.a ../regex/lib regex.a ../strings/libmystrings.a -lz -lwrap
re: shell problem
- restart and pressed 4 at boot menu: single user mount -aw chpass and changed both shells to /usr/local/bin/bash bash-3.00$ would not read .bashrc, so i switched root to /bin/csh and my User to /bin/tcsh. seems to be okay. Darrel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't build ports on older FreeBSD machine
At 10:33 PM 4/18/2005, Kris Kennaway wrote: OK, but I don't care about your HO on this matter. You may not, but users of FreeBSD do. At the very least, ports should be tagged as to the versions of the OS with which they will work, and it should be possible to retrieve the most recent version of the port that works with the version of the OS you are running. Having users update in the standard (and prescribed) way and finding out that a major function (the entire ports system) is no longer working is certainly not something one would expect from professionally crafted software. Note that under Linux, the maintainers of distributions do exactly this. However, FreeBSD is essentially its own distro, so the job of doing this falls to the FreeBSD developers and the maintainers of the ports. If it is not done, FreeBSD users will enjoy an inferior experience to the one they get with Linux or even Windows. --Brett Glass ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't build ports on older FreeBSD machine
On Tue, Apr 19, 2005 at 08:37:43PM -0600, Brett Glass wrote: At 10:33 PM 4/18/2005, Kris Kennaway wrote: OK, but I don't care about your HO on this matter. You may not, but users of FreeBSD do. Those users of FreeBSD who care about supporting the ports collection in a given configuration, do so. They don't just send mails complaining that someone else should do it for them. But of course you know this, because it's pointed out to you each time you make such complaints. Kris P.S. You've ignored my Reply-To for a second time. Are you trying to be deliberately aggravating, or does it just come naturally to you? pgpJRUah4Svcs.pgp Description: PGP signature
Non Network cvsup?
So my IT department won't open port 5999 so I can't access the servers with cvsup. Is there some manual method to synchronize my installation? Can I just ftp a recent copy of ports.tar.gz and replace my installed /usr/ports directory? In particular, I just installed 5.3-Release from cdrom, and it installs Xorg 6.7 rather than 6.8.2; and I don't know what else is already out of date. Thanks, --daniel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't build ports on older FreeBSD machine
At 08:58 PM 4/19/2005, Kris Kennaway wrote: Those users of FreeBSD who care about supporting the ports collection in a given configuration, do so. They don't just send mails complaining that someone else should do it for them. What are you talking about? The maintainer of each port DOES support it for everyone else. That's the point of having port maintainers. However, the conventions for maintenance of ports should include support for all non-EOLed versions of FreeBSD. P.S. You've ignored my Reply-To for a second time. Are you trying to be deliberately aggravating, or does it just come naturally to you? My e-mail client has been honoring your Reply-to field correctly. You'll note that the To: fields on my replies all point to the list. --Brett Glass ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't build ports on older FreeBSD machine
OK, but I don't care about your HO on this matter. (B (B You may not, but users of FreeBSD do. (B (Bmmm . . . (B (B At the very least, (B ports should be tagged as to the versions of the OS (B with which they will work, and it should be possible (B to retrieve the most recent version of the port that (B works with the version of the OS you are running. (B (BIt sounds like a wonderful idea. (B (BWho's going to pay for it? (B (B Having users update in the standard (and prescribed) (B way and finding out that a major function (the entire (B ports system) is no longer working is certainly not (B something one would expect from professionally crafted (B software. (B (BOh? Well, okay, MSWxp sp2 is not what I would call professionally (Bcrafted software. (B (BYou do realize how they got their list of what is known to work and what (Bis known not to work, don't you? (B (B Note that under Linux, the maintainers of distributions (B do exactly this. (B (BOh? (B (BWell, yeah, some do. Some don't. Depends on interest level and, in some (Bcases, whether RH has the budget. (B (B However, FreeBSD is essentially its own (B "distro," so the job of doing this falls to the FreeBSD (B developers and the maintainers of the ports. If it is (B not done, FreeBSD users will enjoy an inferior experience (B to the one they get with Linux or even Windows. (B (BI'm not going to lie. If it were possible to fund each of the BSDs (Benough to maintain professional backporting services for every release, (BI'll admit it would sure be nice. (B (BBut I'm not sure I want to pay for it. (B (BI'll make you a deal. You pay me a hundred bucks an hour to backport (Byour favorite apps and I'll do it. Just be aware that I'll be learning (Bas I go (takes a lot of time!), and I'm the kind of guy who'll then just (Bput the backport up for anyone to download, too. (B (BI think you'll discover it will most likely be cheaper for you to pay (Byourself to upgrade your OS and bring your apps and data up. That (Bapproach has some additional advantages, in that it helps you organize (Band put realistic values on your data and apps. Then, for instance, if (Byou end up paying someone a thousand bucks to bring an abandoned app up (Bon the new OS, or even to backport, or if you spent a week doing it (Byourself, you know why. (B (B-- (BJoel Rees [EMAIL PROTECTED] (Bdigitcom, inc. $B3t<02q
Re: Problem linking MySQL 4.1.11 via FreeBSD 4.10 ports
On Tue, Apr 19, 2005 at 02:02:39PM -1000, Clifton Royston wrote: When I try to make the current port of the MySQL 4.1 server under FreeBSD 4.10, I get a huge stream of undefined reference errors at the link step for mysqld. More factoids - the same error continues to happen: * After rebuilding libtool 1.5.10 to make sure it's OK, as suggested to me offlist. * After rebuilding the linuxthreads port to make sure the library is OK. * After trying the same with MySQL 4.0 (mysql40-server) to make sure it's not a ports problem specific to 4.1. I started doing a bunch of find ... | xargs grep 'mutex_enter_func' and the like for the undefined symbols, and it appears that at least some of the problematic functions I'm looking at are defined internal to MySQL's libraries, and are intended to be inlined. However clearly they can't be succeeding, or they wouldn't be showing up as external references to the link phase. The function mutex_enter_func and some similar ones, for instance, are defined in files with a .ic extension - C files with heavy inlining of assembler - and they are defined with type UNIV_INLINE. In innobase/include/univ.i this shows up thus: #if (!defined(UNIV_DEBUG) !defined(INSIDE_HA_INNOBASE_CC) !defined(UNIV_MUST_NOT_INLINE)) /* Definition for inline version */ #ifdef __WIN__ #define UNIV_INLINE __inline #else /* config.h contains the right def for 'inline' for the current compiler */ #if (__GNUC__ == 2) #define UNIV_INLINE extern inline #else /* extern inline doesn't work with gcc 3.0.2 */ #define UNIV_INLINE static inline #endif #endif #else /* If we want to compile a noninlined version we use the following macro definitions: */ #define UNIV_NONINL #define UNIV_INLINE #endif /* UNIV_DEBUG */ ... so I can see that gcc 2.95 and gcc 3.3 would be handled quite differently by these conditional defines. I am starting to think this might be a toolchain issue, where the ports have gotten out of sync with what the default build environment is for 4.1. Can anyone please verify for me that the mysql40-server and/or mysql41-server ports actually *do* build under gcc 2.95.4 as installed on a fresh-out-of-box 4.x system? I'd really rather not have to upgrade the compiler toolchain just to build this port. -- Clifton -- Clifton Royston -- [EMAIL PROTECTED] Tiki Technologies Lead Programmer/Software Architect I'm gonna tell my son to grow up pretty as the grass is green And whip-smart as the English Channel's wide... -- 'Whip-Smart', Liz Phair ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problem linking MySQL 4.1.11 via FreeBSD 4.10 ports
On Tue, Apr 19, 2005 at 05:22:29PM -1000, Clifton Royston wrote: ... so I can see that gcc 2.95 and gcc 3.3 would be handled quite differently by these conditional defines. I am starting to think this might be a toolchain issue, where the ports have gotten out of sync with what the default build environment is for 4.1. Can anyone please verify for me that the mysql40-server and/or mysql41-server ports actually *do* build under gcc 2.95.4 as installed on a fresh-out-of-box 4.x system? I'd really rather not have to upgrade the compiler toolchain just to build this port. ... Oops, I hate to follow up to myself, but there were a couple rather confusing typos and wording problems in the last few paragraphs. What I meant to say first, is that it seems to me this might be a toolchain problem, in that the ports may not be specifying the *extra* build requirements needed to build them starting from the default build environment for FreeBSD 4.x? ( Not for 4.1!) And last, I meant to say I'd rather not upgrade the compiler unless *necessary* to get MySQL running - I will if I have to. I have seen a number of people post about running MySQL on FreeBSD, though, and I haven't seen any mention that it's now necessary to upgrade GCC first, so I am still puzzled why I seem to be the only one running into this. -- Clifton -- Clifton Royston -- [EMAIL PROTECTED] Tiki Technologies Lead Programmer/Software Architect I'm gonna tell my son to grow up pretty as the grass is green And whip-smart as the English Channel's wide... -- 'Whip-Smart', Liz Phair ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
slow Ethernet
Dear All, I've noticed that transferring files (using the scp command) between a laptop and a desktop is very slow when using FreeBSD. The laptop is running Linux (Debian). The desktop is dual-boot (Debian and FreeBSD). When I boot FreeBSD and scp files to the laptop, transfer times are very slow. If I reboot the desktop to Debian and transfer files, transfer times are at twice as fast. It can't be hardware problems, since the hardware is identical, it's simply the OS. So my question(s): first, has anybody else seen this? Secondly, does anyone know the actual cause? And finally, is there a fix for it? Any help and suggestions are greatly appreciated. thanks and regards, Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: slow Ethernet
On Wed, Apr 20, 2005 at 11:46:12AM +0800, Robert Storey wrote: Dear All, I've noticed that transferring files (using the scp command) between a laptop and a desktop is very slow when using FreeBSD. The laptop is running Linux (Debian). The desktop is dual-boot (Debian and FreeBSD). When I boot FreeBSD and scp files to the laptop, transfer times are very slow. If I reboot the desktop to Debian and transfer files, transfer times are at twice as fast. It can't be hardware problems, since the hardware is identical, it's simply the OS. So my question(s): first, has anybody else seen this? Secondly, does anyone know the actual cause? And finally, is there a fix for it? Any help and suggestions are greatly appreciated. This is typically because of duplex or speed mismatch between the two endpoints. e.g. some less capable NICs autodetect badly, so try specifying the settings exactly. Kris pgpLnE5WQUW5N.pgp Description: PGP signature
