apache 22 ImportError: No module named os
I am tring to make apache 2.2 on freebsd 4.11 but get stop errors when tring to build apache22 port anyone know what is going on? Is the port broken or is it just me? Copying libtool helper files ... buildconf: Using libtool15.m4 at /usr/local/share/aclocal/libtool.m4. Creating include/arch/unix/apr_private.h.in ... Creating configure ... Generating 'make' outputs ... Could not find platform independent libraries Could not find platform dependent libraries Consider setting $PYTHONHOME to [:] 'import site' failed; use -v for traceback Traceback (most recent call last): File "build/gen-build.py", line 12, in ? import os ImportError: No module named os rebuilding rpm spec file rebuilding srclib/apr-util/configure Looking for apr source in ../apr Creating include/private/apu_config.h ... Creating configure ... Generating 'make' outputs ... Could not find platform independent libraries Could not find platform dependent libraries Consider setting $PYTHONHOME to [:] 'import site' failed; use -v for traceback Traceback (most recent call last): File "../apr/build/gen-build.py", line 12, in ? import os ImportError: No module named os ./buildconf failed for apr-util *** Error code 1 Stop in /usr/ports/www/apache22. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
apache make error sed: 1: "s,%%FTPUSERS%%,$FreeBSD ...":
Hello I am running Apache.0.53 on FreeBSD 4.11 and get this error when trying to stop Apache apachectl stop /usr/libexec/ld-elf.so.1: Shared object "libexpat.so.5" not found, required by "httpd" So i searched archives and googled everywhere to find a solution but have discovered nothing. So did what i thought made sense and set out to reinstall a freshly cvsuped version of Apache. Things have changed alot since i last updated Apache. The Apache2 port has been replaced with the Apache20 port. I cannot just do a simple make deinstall and reinstall to update never the less determined to solve my problem I try a make configure on new Apache20 port which will update me to version 2.0.55. However much to my dismay the port spits out this error I tried a make and got the same error config.status: include/ap_config_auto.h is unchanged config.status: executing default commands sed: 1: "s,%%FTPUSERS%%,$FreeBSD ...": bad flag in substitute command: 'v' *** Error code 1 Stop in /usr/ports/www/Apache. I think the two errors must be related some how but am at a loss on how to fix them HELP!!! ps I have recently installed webmin and virtualmin to simplify my life and think it backfired. I believe virtualmin may have caused this all this. -- Computer King/CaNMail http://www.computerking.ca http://www.canmail.org Sales, Service, and Hosting Email, Data, and Web Packages Ask about web design specials Affiliates http://www.computerking.ca/pages/links/affiliates/affiliates.htm Maybe Computer Science should be in the College of Theology. -- R. S. Barton ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: kdm and fluxbox
- Original Message - From: Norberto Meijome <[EMAIL PROTECTED]> To: RYAN M. vAN GINNEKEN <[EMAIL PROTECTED]> Cc: Norberto Meijome <[EMAIL PROTECTED]>, freebsd-questions@freebsd.org Sent: Sun Feb 19 19:12:03 2006 Subject: Re: kdm and fluxbox RYAN M. vAN GINNEKEN wrote: > Thanks to all and i will take your advice Norberto as i do not really like kde that much anyway. If i wanted window i would just install windowsxp or maybe vista would be more like Kde any how i digress. > > I am tiring to set up wdm and added this line to my /etc/ttys > > ttyv8 "/usr/X11R6/bin/wdm -nodaemon" xterm on secure > > followed the instructions below found on the fulxbox site but it does not quite work > > http://fluxbox-wiki.org/index.php/Howto_add_fluxbox_to_wdm > > I get the wdm ok beasty is there, very cool backgound i might add, seen it used in a theme somewhere. No matter what i pick for a windows manager i get the stock Freebsd one wmaker i think? u know the one with the terminal and green menu bars very vanilla. green menu bars = twm wmaker = much better, check it out @ http://www.windowmaker.org > An exception to this kde still works and failsafe gives me control of the terminal window bottom right. > > Also i removed a bunch of managers out of the wdm-config file as i was not using them like this. > > DisplayManager*wdmWm: wmaker:enlightenment:gnome:kde:fluxbox > > I still get failsafe and wmaker where do us suppose these come from. Kde still works but not enlightenment gnome or flux box > > After editing the wdm-config, you need to restart wdm. Ctrl-Alt-Backspace will kill the X server and re-read all the configs. I did that can you please post your wdm-config and a list of your package installed ? (or make them available online) I have tried to attached them but my mail server is giving me grief with attachment right now. the relevant section in my config: --- ! It will run .xsession !DisplayManager*wdmWm: None --- which means it will read .xsession in my home. my .xsession is : $ cat ~/.xsession ## RUNNING bbkeys from Blackbox because it feels more powerful ## to avoid conflicts with fluxbox's key mgr, I emptied .fluxbox/keys bbkeys & xscreensaver -no-splash & fbpager -w & #wmwifi & sleep 1 && gkrellm -w & #fbdesk & torsmo & tilda & skype & gaim & fluxbox --- though I realise that I should be simply running startfluxbox and adding all the other cmds to ~/.fluxbox/startup I do not have an .xsession file in my home dir in fact i do not seem to have an .xsession or an xsession file anywhere on my system just Xsession see below [EMAIL PROTECTED] find / -name xsession [EMAIL PROTECTED] find / -name .xsession [EMAIL PROTECTED] find / -name .Xsession [EMAIL PROTECTED] find / -name Xsession /usr/local/share/config/kdm/Xsession /usr/X11R6/etc/gdm/Xsession /usr/X11R6/lib/X11/xdm/Xsession /usr/X11R6/lib/X11/wdm/Xsession the contents of the wdm one is also attached HIH, beto ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Computer King/CaNMail http://www.computerking.ca http://www.canmail.org Sales, Service, and Hosting Email, Data, and Web Packages Ask about web design specials Affiliates http://www.computerking.ca/pages/links/affiliates/affiliates.htm Maybe Computer Science should be in the College of Theology. -- R. S. Barton ImageMagick-6.2.5.5 Image processing tools ORBit-0.5.17_2 High-performance CORBA ORB with support for the C language ORBit2-2.12.5_1 High-performance CORBA ORB with support for the C language OpenEXR-1.2.2_1 A high dynamic-range (HDR) image file format aalib-1.4.r5_1 An ascii art library akode-2.0,1 Default KDE audio backend akode-plugins-mpc-2.0,1 Musepack decoder plugin for akode akode-plugins-mpeg-2.0,1 MPEG audio decoder plugin for akode akode-plugins-oss-2.0,1 OSS output plugin for akode akode-plugins-resampler-2.0,1 Resampler plugin for akode akode-plugins-xiph-2.0,1 FLAC/Speex/Vorbis decoder plugin for akode amspsfnt-1.0_3 AMSFonts PostScript Fonts (Adobe Type 1 format) apache-ant-1.6.5_1 Java- and XML-based build tool, conceptually similar to mak apr-db4-1.2.2_2 The Apache Group's Portability Library arts-1.5.1,1Audio system for the KDE integrated X11 desktop artswrapper-1.2.2 Setuid wrapper for arts aspell-0.60.4_2 Spelling checker with better suggestion logic than ispell at-spi-1.6.6_1 An Assistive Technology Service Provider Interface atk-1.10.3 A GNOME accessibility toolkit (ATK) autoconf-2.13.000227_5 Automatically configure source code on many Un*x platforms autoconf-2.59_2 Automatically configure source code on many Un*x platforms automake-1.4.6_2GNU Standards-compliant Makefile generator (1.4) automake-1.9.6 GNU Standards-compliant Makefile generator (1.9) bash-3.0.16_1 The GNU Projec
plextor sata dvdr
On Thu, 2006-02-09 at 21:58 -0700, RYAN vAN GINNEKEN wrote: > I am having problems with my plextor dvdr px-716a after adding apticam > to the kernel as recommend in the optical drive section of the handbook > I get freeze up on boot irq storms and the like have to unplug the drive > in order to get thing to work anyone have this problem or is it just me. > > ps have be working on my bsd box all week no sleep no food no leaving > the house help im addicted cant stop. > > On Thu, 2006-02-09 at 02:45 -0700, RYAN vAN GINNEKEN wrote: > > have u sent message to opensound yet?? > > > > > > On Thu, 2006-02-09 at 11:21 +0200, Mehmet Fatih AKBULUT wrote: > > > my sound card is also intel high definition. > > > but i havent heard anything for months ;) > > > if you find a solution please let us learn too. > > > [ps: common advice from this list was to buy a cheaper sound card but i > > > still wait for high definition audio's driver ;)] > > > ___ > > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > > ___ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: intel high definition audio
I am having problems with my plextor dvdr px-716a after adding apticam to the kernel as recommend in the optical drive section of the handbook I get freeze up on boot irq storms and the like have to unplug the drive in order to get thing to work anyone have this problem or is it just me. ps have be working on my bsd box all week no sleep no food no leaving the house help im addicted cant stop. On Thu, 2006-02-09 at 02:45 -0700, RYAN vAN GINNEKEN wrote: > have u sent message to opensound yet?? > > > On Thu, 2006-02-09 at 11:21 +0200, Mehmet Fatih AKBULUT wrote: > > my sound card is also intel high definition. > > but i havent heard anything for months ;) > > if you find a solution please let us learn too. > > [ps: common advice from this list was to buy a cheaper sound card but i > > still wait for high definition audio's driver ;)] > > ___ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: intel high definition audio
have u sent message to opensound yet?? On Thu, 2006-02-09 at 11:21 +0200, Mehmet Fatih AKBULUT wrote: > my sound card is also intel high definition. > but i havent heard anything for months ;) > if you find a solution please let us learn too. > [ps: common advice from this list was to buy a cheaper sound card but i > still wait for high definition audio's driver ;)] > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: intel high definition audio
I am already working on it but something is not right still get errors in gnome no volume control elements and/or devices found when i click on mixer but oss seems to thing everything is great during the test but do not hear anyhthing. I still do not see anything in my dmesg to do with audio what should it be sio1 or dsp0 or what need help ps using gnome if that helps at all? sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled [EMAIL PROTECTED] /usr/local/lib/oss/bin/osstest *** Scanning sound adapter #-1 *** /dev/dsp0 Intel High Definition Audio pcm-front output (adapter0, subdev0) - Performing audio playback test... OK OK OK /dev/dsp1 Intel High Definition Audio pcm-center/LFE output (adapter0, subdev1)- Performing audio playback test... OK OK OK /dev/dsp2 Intel High Definition Audio pcm-side output (adapter0, subdev2) - Performing audio playback test... ^C [EMAIL PROTECTED] /usr/local/lib/oss/bin/osstest *** Scanning sound adapter #-1 *** /dev/dsp0 Intel High Definition Audio pcm-front output (adapter0, subdev0) - Performing audio playback test... OK OK OK /dev/dsp1 Intel High Definition Audio pcm-center/LFE output (adapter0, subdev1)- Performing audio playback test... OK OK OK /dev/dsp2 Intel High Definition Audio pcm-side output (adapter0, subdev2) - Performing audio playback test... OK OK OK /dev/dsp3 Intel High Definition Audio pcm-rear output (adapter0, subdev3) - Performing audio playback test... OK OK OK /dev/dsp4 Intel High Definition Audio pcm-spdifout output (adapter0, subdev4) - Performing audio playback test... OK OK OK /dev/dsp5 Intel High Definition Audio rec1 input (adapter0, subdev5) - Skipping input only device /dev/dsp6 Intel High Definition Audio rec2 input (adapter0, subdev6) - Skipping input only device /dev/dsp7 Intel High Definition Audio rec3 input (adapter0, subdev7) - Skipping input only device /dev/dsp8 Intel High Definition Audio spdifin1 input (adapter0, subdev8) - Skipping input only device *** Scanning sound adapter #0 *** /dev/dsp9 OSS Virtual Mixer v2.5 Playback CH #0 (adapter1, subdev0) - Skipping virtual device (use -V to force test) *** Scanning sound adapter #0 *** /dev/dsp10 OSS Virtual Mixer v2.5 Playback CH #1 (adapter1, subdev1) - Skipping virtual device (use -V to force test) *** Scanning sound adapter #0 *** /dev/dsp11 OSS Virtual Mixer v2.5 Playback CH #2 (adapter1, subdev2) - Skipping virtual device (use -V to force test) *** Scanning sound adapter #0 *** /dev/dsp12 OSS Virtual Mixer v2.5 Playback CH #3 (adapter1, subdev3) - Skipping virtual device (use -V to force test) *** Scanning sound adapter #0 *** /dev/dsp13 OSS Virtual Mixer v2.5 Playback CH #4 (adapter1, subdev4) - Skipping virtual device (use -V to force test) *** Scanning sound adapter #0 *** /dev/dsp14 OSS Virtual Mixer v2.5 Playback CH #5 (adapter1, subdev5) - Skipping virtual device (use -V to force test) *** Scanning sound adapter #0 *** /dev/dsp15 OSS Virtual Mixer v2.5 Playback CH #6 (adapter1, subdev6) - Skipping virtual device (use -V to force test) *** Scanning sound adapter #0 *** /dev/dsp16 OSS Virtual Mixer v2.5 Playback CH #7 (adapter1, subdev7) - Skipping virtual device (use -V to force test) *** All tests completed OK *** On Thu, 2006-02-09 at 11:32 +0300, Andrew Pantyukhin wrote: > On 2/9/06, RYAN vAN GINNEKEN <[EMAIL PROTECTED]> wrote: > > Hello i am having trouble getting my sound to work in gnome I have an > > intel D925XECV2 mainboard has intel high definition audio built in. > > Try this: > http://www.opensound.com/ > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
intel high definition audio
Hello i am having trouble getting my sound to work in gnome I have an intel D925XECV2 mainboard has intel high definition audio built in. There is link to info about board and sound below. I cannot seem to find anything in my dmesg (attached to this email) to do with sound card. Have added snd_driver_load="YES" to my /boot/loader.conf also tried this command kldload snd_ich but it does not seem to work either help http://www.intel.com/design/chipsets/hdaudio.htm [EMAIL PROTECTED] uname -a FreeBSD rachel.computerking.ca 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Tue Feb 7 20:21:07 MST 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...3 2 1 0 done All buffers synced. Uptime: 2h11m2s Shutting down ACPI Rebooting... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff Features2=0x649d> AMD Features=0x2010 Hyperthreading: 2 logical CPUs real memory = 2145579008 (2046 MB) avail memory = 2094800896 (1997 MB) ioapic0 irqs 0-23 on motherboard npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR pci_link0: irq 11 on acpi0 pci_link1: irq 3 on acpi0 pci_link2: irq 5 on acpi0 pci_link3: irq 10 on acpi0 pci_link4: irq 0 on acpi0 pci_link5: irq 0 on acpi0 pci_link6: irq 0 on acpi0 pci_link7: irq 9 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 acpi_perf0: on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: on cpu0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci0: at device 27.0 (no driver attached) pcib2: at device 28.0 on pci0 pci5: on pcib2 pcib3: at device 28.1 on pci0 pci4: on pcib3 pci4: at device 0.0 (no driver attached) pcib4: at device 28.2 on pci0 pci3: on pcib4 pcib5: at device 28.3 on pci0 pci2: on pcib5 uhci0: port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd000-0xd01f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd400-0xd41f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd800-0xd81f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xf3afb800-0xf3afbbff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib6: at device 30.0 on pci0 pci6: on pcib6 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem 0xf3b21000-0xf3b2107f irq 18 at device 2.0 on pci6 miibus0: on xl0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:0a:5e:51:71:48 fwohci0: mem 0xf3b2-0xf3b20fff irq 17 at device 5.0 on pci6 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:13:20:00:00:42:05:0f fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:13:20:42:05:0f fwe0: Ethernet address: 02:13:20:42:05:0f fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_
disk errors help!!
My freebsd 4.11 system has been subjected to a power failure and seems to have many disk errors something about soft updates and not being able to read certain sectors it comes up with the standard single user pick your shell command and tells me to run fsck manually. I have run it several times but the system keeps comming with ad0s4 marked dirty which is my /usr partition. Sometimes i get a resetting device ata0 timeout error. What should i do of course i have no current backups for this system and the most important thing is retrieving my users data it would be great if i could get the system to boot up but if i have to reinstall no biggy as long as i can get most of my data back. ps i promise to do remote backups nightly for the rest of my life. -- Computer King/CaNMail http://www.computerking.ca http://www.canmail.org Sales, Service, and Hosting Email, Data, and Web Packages Ask about web design specials Affiliates http://www.computerking.ca/pages/links/affiliates/affiliates.htm -- If you eat a live frog in the morning, nothing worse will happen to either of you for the rest of the day. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ipf not working correctly???
Thanks but do you have any advice for me rather than fbsd_user "fbsd_user" <[EMAIL PROTECTED]> writes: Your first problem is you have ipfw and ipf both turned on in kernel and rc.conf. You can only have one firewall on at a time. For the record, that is not true. They can coexist, and there are even some (unusual) situations where doing so is useful. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ipf not working correctly???
Ok thank you for your reply I have followed the newest handbook to the letter did you read my email?? which part is incorrect the ipf stuff is comment out of my kernel and also turned off in rc.conf.I have had to re enable ipfw in the kernel to get natd and my server to work properly again. If i remove firewall and ipdivert options my server will no longer route packages to my LAN. I will recompile my kernel one more time with no firewall option at all and comment out all the natd and ipfw lines from rc.conf just to humor you and because i am desperate for this to work. Note i have already tried this but will try again. also you can have both enabled however i do only want ipf for now. fbsd_user wrote: Your first problem is you have ipfw and ipf both turned on in kernel and rc.conf. You can only have one firewall on at a time. Remove all "firewall" and ipf statements from the kernel and recompile or just use the generic kernel. Then remove all "firewall" and "natd' statements from rc.conf. Then go back and read the FreeBSD handbook section on firewalls it's been updated to give detailed instructions on what to do. Follow then to the letter and you will be all set. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of RYAN vAN GINNEKEN Sent: Tuesday, June 21, 2005 3:58 PM To: freebsd-questions@freebsd.org Subject: ipf not working correctly??? Hello all i use FreeBSD stable 4.11 and wish to use built in ipf version 3.x something.i have been using ipfw with type set to open however i have recently been attacked and need to beef up security. I have followed the basic setup that is in the freebsd handbook and read through the world famous ipf howto lots of times. Currently I have the below options compiled into my kernel the docs I have read say you do not need to compile ipfilter options into the kernel to use it. I was going to uncomment the ipfilter stuff and comment out the ipfirewall options when I got ipfilter working. Is it necessary to recompile the kernel without ipfirewall options to make ipfilter work. Kernel OPTIONS options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPDIVERT #optionsIPFILTER #optionsIPFILTER_LOG #optionsIPFILTER_DEFAULT_BLOCK IN MY /etc/rc.conf== #IPF & IPNAT ipfilter_enable="YES" # Start ipf firewall #ipfilter_rules="/etc/ipf.rules" # loads rules definition text file ipfilter_rules="/etc/ipfopen.rules" ipmon_enable="YES"# Start IP monitor log ipmon_flags="-Ds" # D = start as daemon, s = log to syslog, v = ipnat_enable="YES"# Start ipnat function ipnat_rules="/etc/ipnat.rules"# rules definition file for ipnat AS WELL AS THIS TO TURN OF IPFILTER AND NATD #IPFW & NATD firewall_enable="NO firewall_type="OPEN" firewall_quiet="NO" #firewall_scrYESt="/etc/rc.firewall" natd_enable="NO natd_interface="xl0" natd_flags="-f /etc/natd.conf" HERE IS /etc/ipnat.rules= # the rule that forwards everthing map xl0 192.168.0.0/16 -> 0/32 #VNC HOSTS #HOST 1 #java rdr xl0 0/32 port 5801 -> 192.168.0.1 port 5801 #no java rdr xl0 0/32 port 5901 -> 192.168.0.1 port 5901 #HOST 2 #java rdr xl0 0/32 port 5802 -> 192.168.0.1 port 5802 #no java rdr xl0 0/32 port 5902 -> 192.168.0.1 port 5902 === PLEASE FIND MY ipf.rules ATTACHED TO this email I have even tried to use the following rules set to see if I could get ipf to work as an open firewall but it still seems to block to much. === pass out quick on lo0 all pass in quick on lo0 all pass out quick on xl1 all pass in quick on xl1 all pass out quick on xl0 all pass in quick on xl0 all when I ping google.ca I get errors about unknown hostname. When I ping googles ipaddress I get permission denied over and over again. When I try to use lynx I get alert destination host unreachable. Seems like dns?? When I turn off ipf and use ipfw set to open everything works fine again. Please someone help what is going wrong. ipmon/ipfstat do not seem to help but mabey i need some guidance with these tools. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ipf not working correctly???
Hello all i use FreeBSD stable 4.11 and wish to use built in ipf version 3.x something.i have been using ipfw with type set to open however i have recently been attacked and need to beef up security. I have followed the basic setup that is in the freebsd handbook and read through the world famous ipf howto lots of times. Currently I have the below options compiled into my kernel the docs I have read say you do not need to compile ipfilter options into the kernel to use it. I was going to uncomment the ipfilter stuff and comment out the ipfirewall options when I got ipfilter working. Is it necessary to recompile the kernel without ipfirewall options to make ipfilter work. Kernel OPTIONS options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPDIVERT #optionsIPFILTER #optionsIPFILTER_LOG #optionsIPFILTER_DEFAULT_BLOCK IN MY /etc/rc.conf== #IPF & IPNAT ipfilter_enable="YES" # Start ipf firewall #ipfilter_rules="/etc/ipf.rules" # loads rules definition text file ipfilter_rules="/etc/ipfopen.rules" ipmon_enable="YES"# Start IP monitor log ipmon_flags="-Ds" # D = start as daemon, s = log to syslog, v = ipnat_enable="YES"# Start ipnat function ipnat_rules="/etc/ipnat.rules"# rules definition file for ipnat AS WELL AS THIS TO TURN OF IPFILTER AND NATD #IPFW & NATD firewall_enable="NO firewall_type="OPEN" firewall_quiet="NO" #firewall_scrYESt="/etc/rc.firewall" natd_enable="NO natd_interface="xl0" natd_flags="-f /etc/natd.conf" HERE IS /etc/ipnat.rules= # the rule that forwards everthing map xl0 192.168.0.0/16 -> 0/32 #VNC HOSTS #HOST 1 #java rdr xl0 0/32 port 5801 -> 192.168.0.1 port 5801 #no java rdr xl0 0/32 port 5901 -> 192.168.0.1 port 5901 #HOST 2 #java rdr xl0 0/32 port 5802 -> 192.168.0.1 port 5802 #no java rdr xl0 0/32 port 5902 -> 192.168.0.1 port 5902 === PLEASE FIND MY ipf.rules ATTACHED TO this email I have even tried to use the following rules set to see if I could get ipf to work as an open firewall but it still seems to block to much. === pass out quick on lo0 all pass in quick on lo0 all pass out quick on xl1 all pass in quick on xl1 all pass out quick on xl0 all pass in quick on xl0 all when I ping google.ca I get errors about unknown hostname. When I ping googles ipaddress I get permission denied over and over again. When I try to use lynx I get alert destination host unreachable. Seems like dns?? When I turn off ipf and use ipfw set to open everything works fine again. Please someone help what is going wrong. ipmon/ipfstat do not seem to help but mabey i need some guidance with these tools. # # No restrictions on Inside LAN Interface for private network # Not needed unless you have LAN # pass out quick on xl1 all pass in quick on xl1 all #fail safe open all on outside interface #pass out quick on x10 all #pass in quick on x10 all #pass out quick on xl0 from any to any all #pass in quick on xl0 from any to any all # # No restrictions on Loopback Interface # pass in quick on lo0 all pass out quick on lo0 all # # Interface facing Public Internet (Outbound Section) # Interrogate session start requests originating from behind the # firewall on the private network # or from this gateway server destine for the public Internet. # # Allow out access to my ISP's Domain name server. # xxx must be the IP address of your ISP's DNS. # Dup these lines if your ISP has more than one DNS server # Get the IP addresses from /etc/resolv.conf file #pass out quick on xl0 proto tcp from any to 192.168.0.202 port = 53 flags S keep state #pass out quick on xl0 proto udp from any to 192.168.0.202 port = 53 keep state #pass out quick on xl0 proto tcp from any to 64.59.135.133 port = 53 flags S keep state #pass out quick on xl0 proto udp from any to 64.59.135.135 port = 53 keep state pass out quick on xl0 proto tcp from any to any port = 53 flags S keep state pass out quick on xl0 proto udp from any to any port = 53 keep state # Allow out access to my ISP's DHCP server for cable or DSL networks. # This rule is not needed for 'user ppp' type connection to the # public Internet, so you can delete this whole group. # Use the following rule and check log f
ipf and ipnat
Hello all i use FreeBSD stable 4.11 and wish to use ipf i have been using ipfw with type set to open however i have recently been attacked and need to beef up security. I have followed the basic setup that is in the freebsd handbook only differance is i added a few lines here and there to my ruleset. Everything seems to work fine when i have ipfirewall compiled into my kernel. When i remove the ipfirewall options ie IPFIREWALL, IPDIVERT everhting seems to break. Adding IPFILTER to the kernel does not help ethier. what is going on how do i enable ipf and ipnat and disable ipfw and natd. I had ipf working once but now it is broken and so is ipfw i have a broken bsd box please help. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
make buildworld
I am trying to make buildworld for freebsd 5.3 stable and have done a complete cvsup and keep getting the following error messages. Please help mkdep -f .depend -a-DLIBC_SCCS -I/usr/src/lib/libkvm /usr/src/lib/libkvm/kvm.c /usr/src/lib/libkvm/kvm_i386.c /usr/src/lib/libkvm/kvm_file.c /usr/src/lib/libkvm/kvm_getloadavg.c /usr/src/lib/libkvm/kvm_getswapinfo.c /usr/src/lib/libkvm/kvm_proc.c cc -O -pipe -DLIBC_SCCS -I/usr/src/lib/libkvm -c /usr/src/lib/libkvm/kvm.c cc -O -pipe -DLIBC_SCCS -I/usr/src/lib/libkvm -c /usr/src/lib/libkvm/kvm_i386.c cc -O -pipe -DLIBC_SCCS -I/usr/src/lib/libkvm -c /usr/src/lib/libkvm/kvm_file.c cc -O -pipe -DLIBC_SCCS -I/usr/src/lib/libkvm -c /usr/src/lib/libkvm/kvm_getloadavg.c cc -O -pipe -DLIBC_SCCS -I/usr/src/lib/libkvm -c /usr/src/lib/libkvm/kvm_getswapinfo.c cc -O -pipe -DLIBC_SCCS -I/usr/src/lib/libkvm -c /usr/src/lib/libkvm/kvm_proc.c /usr/src/lib/libkvm/kvm_proc.c: In function `kvm_proclist': /usr/src/lib/libkvm/kvm_proc.c:269: warning: assignment makes integer from pointer without a cast /usr/src/lib/libkvm/kvm_proc.c:341: error: structure has no member named `p_runtime' *** Error code 1 Stop in /usr/src/lib/libkvm. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. lotus# ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: dumping a samba directory
Thank you this solved my problem guess i will have to use a different prog like tar do you have any recommendations on which type of archiver to use. John wrote: On Fri, Jan 28, 2005 at 12:46:36PM -0700, RYAN vAN GINNEKEN wrote: does anyone know how to dump a samba directory i keep getting this error dump: /usr/local/samba/export/classic: unknown file system Kilobytes Out 0 Hey, Ryan! Dump is not able to work on directories. The "atom" for dump is an entire filesystem. As a convenience, you can give dump the mount point, but it actually bypasses the normal filesystem code and talks to the device file directly - it just looks up the mount point to get the device. It understands the filesystem datastructures on its own and interprets them as much as necessary to build it's directory and datablock list. So - if a directory isn't a mount point - if it doesn't show up in a "df" or "mount" list as a type "ufs" and "local", dump can't operate on it. Dump is create, really awesome at what it does - but it doesn't do anything else. :) It is really different from tar or cpio or any of the other programs that go THROUGH the filesystem code rather than bypassing it. ERROR: non-zero exit from: dump -0 -b 10 -a -f - /usr/local/samba/export/classic ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- COMPUTER KING for all your computer needs http://www.computerking.ca email [EMAIL PROTECTED] phone 403-613-LUCK (5825) Hosting, Networking, Disaster Recovery, and Virus Removal solutions fit for royalty. Intel based SYSTEMS Toshiba Fujutsu Sony Acer and many more LAPTOPS Full line of high quality PARTS Current Specials Samsung printers and HOSTING packages ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
dumping a samba directory
does anyone know how to dump a samba directory i keep getting this error dump: /usr/local/samba/export/classic: unknown file system Kilobytes Out 0 ERROR: non-zero exit from: dump -0 -b 10 -a -f - /usr/local/samba/export/classic ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
dumping a samba directory
does anyone know how to dump a samba directory i keep getting this error dump: /usr/local/samba/export/classic: unknown file system Kilobytes Out 0 ERROR: non-zero exit from: dump -0 -b 10 -a -f - /usr/local/samba/export/classic -- COMPUTER KING for all your computer needs http://www.computerking.ca email [EMAIL PROTECTED] phone 403-613-LUCK (5825) Hosting, Networking, Disaster Recovery, and Virus Removal solutions fit for royalty. Intel based SYSTEMS Toshiba Fujutsu Sony Acer and many more LAPTOPS Full line of high quality PARTS Current Specials Samsung printers and HOSTING packages ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Seagate CTT3200I-F
_*I need to know if this device will work with freebsd 4.10 *__*Seagate CTT3200I-F 1.6/3.2GB TR-3 Internal Atapi Tape Drive*_ It just plugs into the floppy cable does anyone know anything about this device and BSD ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
failover for http
Does anyone know of a good package or howto that covers the failover topic?? I have found lots of stuff on google but hard to know if these progs do what i need. There has to be something in the ports that archive this spread with wackmole maybe seems very complex and not even sure it will suit my needs??? I have 2 server in different locations with different ip's is it possible to have these servers back each other up? I have read ip on the cheap from the Unix hacks book but it does not seem to cover the different location and ip issue. Please a point in the right direction would be great. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
procmail postfix maildir
I am useing Freebsd 4.10stable, postfix 2.1.5 with SASL and TLS, procmail version 3.22 and binc IMAP 1.2.8 binc uses Maildir style mail boxes and i have everthing set up to for $HOME/IMAPdir. Funny thing is pocmail sends me the mails it filters fine but the stuff it doesnt filter gets lost in my system mail box /var/mail/rmvg. I have included my .procmailrc, rc.test (reciepe file with test rule), and pmlog(procmail log with verbose enabled) also a postconf -n file for all to see and hopefully someone can help me solve this problem. .procmailrc Begin Variables section # It is essential that you set SHELL to a Bourne-type shell if # external commands are run from your procmailrc, for example if # you use rc.spamassassin, rc.quarantine, or other advanced recipes. # Setting SHELL should not be needed for the simple sorting recipes in # this step-by-step section, but to be safe and to future proof your # procmailrc, set it anyway! Details are in Check Your $SHELL and $PATH. SHELL=/bin/sh #PATH=$HOME/bin:/usr/bin:/bin:/usr/local/bin:. # Directory for storing procmail configuration and log files # You can name this variable anything you like, for # example PROCMAILDIR or don't set it (but then don't refer to it!) PMDIR=$HOME/Procmail # LOGFILE should be specified ASAP so everything below it is logged # Put ## before LOGFILE if you want no logging (not recommended) LOGFILE=$PMDIR/pmlog # To insert a blank line between each message's log entry, # uncomment next two lines (this is helpful for debugging) LOG=" " # Set to yes when debugging; VERBOSE default is no VERBOSE=yes # Replace $HOME/Msgs with the directory where your personal (non-system-spool) mail # Mutt and elm use $HOME/Mail # Pine uses $HOME/mail # Netscape Messenger uses $HOME/nsmail # Some NNTP clients, such as slrn & nn, use $HOME/News # Mailboxes in maildir format or served by Courier IMAP are often in $HOME/Maildir # Mailboxes served by UW IMAP are sometimes in $HOME MAILDIR=$HOME/IMAPdir # This directory must exist & be writable by your LOGNAME #DEFAULT=IN-catchall # On most systems, your $MAILDIR is a sub # IMPORTANT: Upon reading a line that begins with MAILDIR= #Procmail does a chdir to $MAILDIR and #relative paths are relative to $MAILDIR End Variables section; Begin Processing section INCLUDERC=$PMDIR/rc.testing #INCLUDERC=$PMDIR/rc.subscriptions # Messages that fall through all your procmail recipes are delivered # to your default INBOX. To find out yours, see step 2 above. End Processing section rc.testing :0 * ^Subject:.*test IN-testing/ #IN-testing #IN-testing/ #IN-testing/. #.IN-testing pmlog procmail: [10251] Tue Oct 26 00:11:32 2004 procmail: Assigning "MAILDIR=/home/rmvg/IMAPdir" procmail: Assigning "INCLUDERC=/home/rmvg/Procmail/rc.testing" procmail: No match on "^Subject:.*test" procmail: Bypassed locking "/var/mail/rmvg.lock" procmail: Assigning "LASTFOLDER=/var/mail/rmvg" procmail: Opening "/var/mail/rmvg" procmail: Acquiring kernel-lock procmail: Notified comsat: "[EMAIL PROTECTED]:/var/mail/rmvg" From [EMAIL PROTECTED] Tue Oct 26 00:11:32 2004 Subject: procmail final Folder: /var/mail/rmvg885 procmail: [10252] Tue Oct 26 00:11:41 2004 procmail: Assigning "MAILDIR=/home/rmvg/IMAPdir" procmail: Assigning "INCLUDERC=/home/rmvg/Procmail/rc.testing" procmail: Match on "^Subject:.*test" procmail: Assigning "LASTFOLDER=IN-testing/new/1098771101.10252_0.v22.computerking. procmail: Notified comsat: "[EMAIL PROTECTED]:/home/rmvg/IMAPdir/IN-testing/new/1098771101.102 From [EMAIL PROTECTED] Tue Oct 26 00:11:41 2004 Subject: procmail testing Folder: IN-testing/new/1098771101.10252_0.v22.computerking.ca 848 postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/local/sbin config_directory = /usr/local/etc/postfix daemon_directory = /usr/local/libexec/postfix debug_peer_level = 2 home_mailbox = IMAPdir/INBOX/ html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain $mydomain mydomain = computerking.ca myhostname = mail1.computerking.ca mynetworks_style = subnet myorigin = $mydomain newaliases_path = /usr/local/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relay_domains = $mydestination, shoemasters.computerking.ca, highcoup.ca sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_tls_loglevel = 2 smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_recipient_restrictions = permit_mynetworks, permit_mx_backup,permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_application_name = smtpd smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain
procmail postfix maildir
I am useing Freebsd 4.10stable, postfix 2.1.5 with SASL and TLS, procmail version 3.22 and binc IMAP 1.2.8 binc uses Maildir style mail boxes and i have everthing set up to for $HOME/IMAPdir. Funny thing is pocmail sends me the mails it filters fine but the stuff it doesnt filter gets lost in my system mail box /var/mail/rmvg. I have included my .procmailrc, rc.test (reciepe file with test rule), and pmlog(procmail log with verbose enabled) also a postconf -n file for all to see and hopefully someone can help me solve this problem. .procmailrc Begin Variables section # It is essential that you set SHELL to a Bourne-type shell if # external commands are run from your procmailrc, for example if # you use rc.spamassassin, rc.quarantine, or other advanced recipes. # Setting SHELL should not be needed for the simple sorting recipes in # this step-by-step section, but to be safe and to future proof your # procmailrc, set it anyway! Details are in Check Your $SHELL and $PATH. SHELL=/bin/sh #PATH=$HOME/bin:/usr/bin:/bin:/usr/local/bin:. # Directory for storing procmail configuration and log files # You can name this variable anything you like, for # example PROCMAILDIR or don't set it (but then don't refer to it!) PMDIR=$HOME/Procmail # LOGFILE should be specified ASAP so everything below it is logged # Put ## before LOGFILE if you want no logging (not recommended) LOGFILE=$PMDIR/pmlog # To insert a blank line between each message's log entry, # uncomment next two lines (this is helpful for debugging) LOG=" " # Set to yes when debugging; VERBOSE default is no VERBOSE=yes # Replace $HOME/Msgs with the directory where your personal (non-system-spool) mail # Mutt and elm use $HOME/Mail # Pine uses $HOME/mail # Netscape Messenger uses $HOME/nsmail # Some NNTP clients, such as slrn & nn, use $HOME/News # Mailboxes in maildir format or served by Courier IMAP are often in $HOME/Maildir # Mailboxes served by UW IMAP are sometimes in $HOME MAILDIR=$HOME/IMAPdir # This directory must exist & be writable by your LOGNAME #DEFAULT=IN-catchall # On most systems, your $MAILDIR is a sub # IMPORTANT: Upon reading a line that begins with MAILDIR= #Procmail does a chdir to $MAILDIR and #relative paths are relative to $MAILDIR End Variables section; Begin Processing section INCLUDERC=$PMDIR/rc.testing #INCLUDERC=$PMDIR/rc.subscriptions # Messages that fall through all your procmail recipes are delivered # to your default INBOX. To find out yours, see step 2 above. End Processing section rc.testing :0 * ^Subject:.*test IN-testing/ #IN-testing #IN-testing/ #IN-testing/. #.IN-testing pmlog procmail: [10251] Tue Oct 26 00:11:32 2004 procmail: Assigning "MAILDIR=/home/rmvg/IMAPdir" procmail: Assigning "INCLUDERC=/home/rmvg/Procmail/rc.testing" procmail: No match on "^Subject:.*test" procmail: Bypassed locking "/var/mail/rmvg.lock" procmail: Assigning "LASTFOLDER=/var/mail/rmvg" procmail: Opening "/var/mail/rmvg" procmail: Acquiring kernel-lock procmail: Notified comsat: "[EMAIL PROTECTED]:/var/mail/rmvg" From [EMAIL PROTECTED] Tue Oct 26 00:11:32 2004 Subject: procmail final Folder: /var/mail/rmvg885 procmail: [10252] Tue Oct 26 00:11:41 2004 procmail: Assigning "MAILDIR=/home/rmvg/IMAPdir" procmail: Assigning "INCLUDERC=/home/rmvg/Procmail/rc.testing" procmail: Match on "^Subject:.*test" procmail: Assigning "LASTFOLDER=IN-testing/new/1098771101.10252_0.v22.computerking. procmail: Notified comsat: "[EMAIL PROTECTED]:/home/rmvg/IMAPdir/IN-testing/new/1098771101.102 From [EMAIL PROTECTED] Tue Oct 26 00:11:41 2004 Subject: procmail testing Folder: IN-testing/new/1098771101.10252_0.v22.computerking.ca 848 postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/local/sbin config_directory = /usr/local/etc/postfix daemon_directory = /usr/local/libexec/postfix debug_peer_level = 2 home_mailbox = IMAPdir/INBOX/ html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain $mydomain mydomain = computerking.ca myhostname = mail1.computerking.ca mynetworks_style = subnet myorigin = $mydomain newaliases_path = /usr/local/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relay_domains = $mydestination, shoemasters.computerking.ca, highcoup.ca sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_tls_loglevel = 2 smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_recipient_restrictions = permit_mynetworks, permit_mx_backup,permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_application_name = smtpd smtpd_sasl_auth_e
[SM-USERS] SQSPELL
Hello need some help with the sqspell plugin for squirrel mail I am using 1.4.3a version on freebsd version 4.10 stable and wish to use aspell version aspell-0.60_2. Having trouble finding any documentation could someone give me some advice as to how to set this up. Also i had ispell installed but it did not work with squirrel mail either prefer aspell this is the error i an getting. *Warning*: htmlspecialchars() expects parameter 1 to be string, array given in */usr/local/www/squirrelmail/plugins/squirrelspell/modules/check_me.mod* on line *119* *Warning*: join(): Bad arguments. in */usr/local/www/squirrelmail/plugins/squirrelspell/modules/check_me.mod* on line *119* --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- squirrelmail-users mailing list Posting Guidelines: http://squirrelmail.org/wiki/wiki.php?MailingListPostingGuidelines List Address: [EMAIL PROTECTED] List Archives: http://news.gmane.org/thread.php?group=gmane.mail.squirrelmail.user List Archives: http://sourceforge.net/mailarchive/forum.php?forum_id=2995 List Info: https://lists.sourceforge.net/lists/listinfo/squirrelmail-users ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mondo rescue
Has anyone gotten mondo rescue to work with freebsd? I am lost please any info would be welcome. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ata1-slave: ATA identify retries exceeded
Keep getting this error in my dmesg ata1-slave: ATA identify retries exceeded this is for my cdrom drive and it is not working can someone give me some hints on how to trouble shoot. The jumpers are set right and i have replace the cable but still get the error. Here is the intire dmseg dump Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-STABLE #0: Fri Sep 3 02:10:11 MDT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ABIKO.COMPUTERKING.CA Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 233288650 Hz CPU: Pentium II/Pentium II Xeon/Celeron (233.29-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping = 4 Features=0x80f9ff real memory = 167772160 (163840K bytes) config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> q avail memory = 159379456 (155644K bytes) Preloaded elf kernel "kernel" at 0xc03a5000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a509c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00fdf40 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 agp0: mem 0xf800-0xfbff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x10c0-0x10cf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0x1080-0x109f irq 9 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip0: port 0x7000-0x700f at device 7.3 on pci0 sio0: <3COM PCI FaxModem> port 0x10d0-0x10d7 irq 10 at device 13.0 on pci0 sio0: moving to sio4 sio4: type 16550A xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x1000-0x107f mem 0xf410-0xf410007f irq 11 at device 14.0 on pci0 xl0: Ethernet address: 00:04:75:a1:53:34 miibus0: on xl0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: port 0x10a0-0x10bf mem 0xf400-0xf40f,0xf4101000-0xf4101fff irq 3 at device 15.0 on pci0 fxp0: Ethernet address 00:a0:c9:aa:f4:d4 inphy0: on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0: too many dependant configs (8) isa0: unexpected small tag 14 orm0: at iomem 0xc-0xc7fff,0xc8000-0xc87ff,0xe-0xe3fff,0xe4000-0xe on isa0 pmtimer0 on isa0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default ata1-slave: ATA identify retries exceeded ad0: 4120MB [8930/15/63] at ata0-master UDMA33 ad2: 3832MB [8306/15/63] at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s1a ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: packet pass through vs ftp -- performance weirdity
Happened to me once needed to set the the speed of the nic card in rc.conf can not remember how to do it but it is in the man rc.conf page and solved my similar problem. Looks something like this if i can recall ifconfig_xl0="inet 209.155.173.22 something about manually setting the speed and mode of the card " for me it had to do with the card not negotiating it parameters properly and i had to beat it into submission with manual overrides. glanced through the rc.conf man page but it is to long for me deal with right now the setting are in there somewhere. Gary Aitken wrote: I'm seeing some weird network performance I don't understand. If I sit at an NT box and using a web browser, go through my fbsd 4.10 firewall to someplace out in the world through a slow dsl connection, I get download speeds of 20KB - 45KB/sec, pretty much the max my DSL connection can deliver. The nt box is connected to the fbsd box over a 10Mb/sec full duplex crossover cable for test purposes. If I ftp (shell window) or use a browser to ftp from the fbsd box itself, I see a max speed of something like 8KB/sec. This makes absolutely no sense to me, given the relative speeds of the network connections, which I would have thought was the limiting factor. The fbsd box is a p200, 128M, single 7200rpm 9.4ms seagate ultra scsi drive, 10MB/sec negotiated xfr rate. Data used for testing was ~8MB file in /var partition, don't know how badly fragmented. Is passing packets through the firewall and ipfw rules that much faster than an ftp access? Ideas for where to look for what's slowing things down? Thanks, Gary ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
setting up anon ftp
I am tring to setup anon ftp on my bsd box and followed the directions layed out on this web page http://www.freebsddiary.org/ftp-anonymous.php but to no avial. The anon user should be able to browse the dirctories and upload files to incoming but not be able to downlaod or erase files from the incoming directory. My problem is that the anon user can download files from the incoming directory and i have already had script kiddies up and down loading files can someone please help. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FTP server will not initiate DATA connection back to client
I am tring to setup anon ftp on my bsd box and followed the directions layed out on this web page http://www.freebsddiary.org/ftp-anonymous.php but to no avial. The anon user should be able to browse the dirctories and upload files to incoming but not be able to downlaod or erase files from the incoming directory. My problem is that the anon user can download files from the incoming directory and i have already had script kiddies up and down loading files can someone please help. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: apache permission problem please help
Ok as anyone reading this thread knows i have huge mess on hands. Have found that if i set the all the users dir to 701 chmod -R 701 home then go into each users home directory and set the the www directory to 751 cd /home/user chmod -R 751 www then change the group permissions of this folder to www chown -R :www www apache works again This is all great but what a pain there must be an easier way as i have many users and do not want to go through this process for all of them. This seems like a secure method i think or would the /usr/local/www/user with a symlink be more secure. I run a stock freebsd system and do not really what users poking around have heard about chrooting as an another option for this I am very confused need some guidance. side note I also have all my users in one directory and it is getting large would like to move some of them into new directories like maybe webclients and mailclients but i moved one and had to modify the permissions all over again and update the password database and oh what a nightmare will take me days. Nathan Kinkade wrote: On Tue, Aug 24, 2004 at 03:09:04PM -0600, RYAN vAN GINNEKEN wrote: SEE ERROR BELOW Was playing with permissions on my home dirs last night and changed everything to chmod 700 had some problem with users looking at and copying other users webpages. I have a directory in each users home dir named www where they keep there web files ie /usr/home/username/www so i guess when i changed everything to 700 apache was unable to use these files. Now i have tried the best i can to change everything back set to chmod to 655 and even tried moving a site to /usr/local/www/username in hope that apache could read it there but no luck what has happened please help. Wait now things have started to work, for the web site that i moved to /usr/local/www/username. There seems to be some lag after i make changes to the permissions and restart apache is this possible. I have a real mess on my hands now guess i will have to play with permissions and modes now to get all the sites backup. How do i set up home directories that are secure for each user ie other users on the system cannot read them but apache can. Should i move all web pages to the /usr/local/www dir. Also is there some way to automate this so that when i create a new user or modify a file things will work correctly. Have been using UNIX for many years finally got up the courage to play with modes and perms. Guess i shot myself in the foot like i have been warned about by many people and docs. A better approach would be to set each users home dir itself to 700 permissions, not necessarily all the files and directories in each users dir. Are you using a httpd.conf directive such as to allow users to publish files from their home dir, or are you putting sym links in the web root? Nathan I am using the home directory no symlinks ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
apache permission problem please help
SEE ERROR BELOW Was playing with permissions on my home dirs last night and changed everything to chmod 700 had some problem with users looking at and copying other users webpages. I have a directory in each users home dir named www where they keep there web files ie /usr/home/username/www so i guess when i changed everything to 700 apache was unable to use these files. Now i have tried the best i can to change everything back set to chmod to 655 and even tried moving a site to /usr/local/www/username in hope that apache could read it there but no luck what has happened please help. Wait now things have started to work, for the web site that i moved to /usr/local/www/username. There seems to be some lag after i make changes to the permissions and restart apache is this possible. I have a real mess on my hands now guess i will have to play with permissions and modes now to get all the sites backup. How do i set up home directories that are secure for each user ie other users on the system cannot read them but apache can. Should i move all web pages to the /usr/local/www dir. Also is there some way to automate this so that when i create a new user or modify a file things will work correctly. Have been using UNIX for many years finally got up the courage to play with modes and perms. Guess i shot myself in the foot like i have been warned about by many people and docs. PLEASE HELP Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.49 (Unix) PHP/4.3.5 mod_ssl/2.0.49 OpenSSL/0.9.7d Server at v2.computerking.ca Port 80 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
apache permission problem please help
SEE ERROR BELOW Was playing with permissions on my home dirs last night and changed everything to chmod 700 had some problem with users looking at and copying other users webpages. I have a directory in each users home dir named www where they keep there web files ie /usr/home/username/www so i guess when i changed everything to 700 apache was unable to use these files. Now i have tried the best i can to change everything back set to chmod to 655 and even tried moving a site to /usr/local/www/username in hope that apache could read it there but no luck what has happened please help. Wait now things have started to work, for the web site that i moved to /usr/local/www/username. There seems to be some lag after i make changes to the permissions and restart apache is this possible. I have a real mess on my hands now guess i will have to play with permissions and modes now to get all the sites backup. How do i set up home directories that are secure for each user ie other users on the system cannot read them but apache can. Should i move all web pages to the /usr/local/www dir. Also is there some way to automate this so that when i create a new user or modify a file things will work correctly. Have been using UNIX for many years finally got up the courage to play with modes and perms. Guess i shot myself in the foot like i have been warned about by many people and docs. PLEASE HELP Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.49 (Unix) PHP/4.3.5 mod_ssl/2.0.49 OpenSSL/0.9.7d Server at v2.computerking.ca Port 80 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
sasl plain login ath failure
I am using postfix version 2.0.0.18 with tls and sasl2 on freebsd stable 4.9 using cyrus-sasl/saslauthd version 2.1.1.19 have configured the my /user/local/lib/sasl2 dir to contain only Sendmail.conf liblogin.so libplain.a libplain.so.2 liblogin.a liblogin.so.2 libplain.so smptd.conf and my smtpd.conf file has this configuration # This sets smtpd to authenticate using the saslauthd daemon. pwcheck_method:saslauthd # This allows only plain and login as the authentication mechanisms. mech_list: plain login Seems simple enough however when i try to logon to my SMTP server i get the following errors. Aug 17 17:07:07 v22 postfix/smtpd[2643]: warning: unknown[209.115.173.22]: SASL PLAIN authentication failed Aug 17 17:07:08 v22 postfix/smtpd[2643]: warning: unknown[209.115.173.22]: SASL LOGIN authentication failed when i test the server with telnet i get this EHLO computerking.ca 250-mail1.computerking.ca 250-PIPELINING 250-SIZE 1024 250-VRFY 250-ETRN 250-STARTTLS 250-XVERP 250 8BITMIME there is know output about this must be my problem 250-AUTH LOGIN PLAIN OTP DIGEST-MD5 CRAM-MD5 250-AUTH=LOGIN PLAIN OTP DIGEST-MD5 CRAM-MD5 Is there a log i can check for sasl errors somewhere or do i need to change my permissions on the passwd file any help would be appreciated. Here is a posconf -n output if that helps anyone help me thank you in advance. v22.computerking.ca > /usr/local/lib/sasl2 $postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/local/sbin config_directory = /usr/local/etc/postfix daemon_directory = /usr/local/libexec/postfix debug_peer_level = 2 home_mailbox = IMAPdir/INBOX/ inet_interfaces = all mail_owner = postfix mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain $mydomain mydomain = computerking.ca myhostname = mail1.computerking.ca mynetworks_style = subnet myorigin = $mydomain newaliases_path = /usr/local/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relay_domains = $mydestination, shoemasters.computerking.ca, highcoup.ca sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_tls_loglevel = 2 smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_recipient_restrictions = permit_mx_backup permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_sender_restrictions = permit_mx_backup permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_tls_CAfile = /usr/local/sslcerts/cacert.pem smtpd_tls_auth_only = yes smtpd_tls_cert_file = /usr/local/sslcerts/certs/mail-cert.pem smtpd_tls_key_file = /usr/local/sslcerts/certs/mail-key.pem smtpd_tls_loglevel = 2 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = no tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 450 virtual_alias_domains = sculpturaldesign.ca virtual_alias_maps = hash:/usr/local/etc/postfix/virtual ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
sasl plain login ath failure
I am using postfix version 2.0.0.18 with tls and sasl2 on freebsd stable 4.9 using cyrus-sasl/saslauthd version 2.1.1.19 have configured the my /user/local/lib/sasl2 dir to contain only Sendmail.conf liblogin.so libplain.a libplain.so.2 liblogin.a liblogin.so.2 libplain.so smptd.conf and my smtpd.conf file has this configuration # This sets smtpd to authenticate using the saslauthd daemon. pwcheck_method:saslauthd # This allows only plain and login as the authentication mechanisms. mech_list: plain login Seems simple enough however when i try to logon to my SMTP server i get the following errors. Aug 17 17:07:07 v22 postfix/smtpd[2643]: warning: unknown[209.115.173.22]: SASL PLAIN authentication failed Aug 17 17:07:08 v22 postfix/smtpd[2643]: warning: unknown[209.115.173.22]: SASL LOGIN authentication failed when i test the server with telnet i get this EHLO computerking.ca 250-mail1.computerking.ca 250-PIPELINING 250-SIZE 1024 250-VRFY 250-ETRN 250-STARTTLS 250-XVERP 250 8BITMIME there is know output about this must be my problem 250-AUTH LOGIN PLAIN OTP DIGEST-MD5 CRAM-MD5 250-AUTH=LOGIN PLAIN OTP DIGEST-MD5 CRAM-MD5 Is there a log i can check for sasl errors somewhere or do i need to change my permissions on the passwd file any help would be appreciated. Here is a posconf -n output if that helps anyone help me thank you in advance. v22.computerking.ca > /usr/local/lib/sasl2 $postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/local/sbin config_directory = /usr/local/etc/postfix daemon_directory = /usr/local/libexec/postfix debug_peer_level = 2 home_mailbox = IMAPdir/INBOX/ inet_interfaces = all mail_owner = postfix mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain $mydomain mydomain = computerking.ca myhostname = mail1.computerking.ca mynetworks_style = subnet myorigin = $mydomain newaliases_path = /usr/local/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relay_domains = $mydestination, shoemasters.computerking.ca, highcoup.ca sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_tls_loglevel = 2 smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_recipient_restrictions = permit_mx_backup permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_sender_restrictions = permit_mx_backup permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_tls_CAfile = /usr/local/sslcerts/cacert.pem smtpd_tls_auth_only = yes smtpd_tls_cert_file = /usr/local/sslcerts/certs/mail-cert.pem smtpd_tls_key_file = /usr/local/sslcerts/certs/mail-key.pem smtpd_tls_loglevel = 2 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = no tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 450 virtual_alias_domains = sculpturaldesign.ca virtual_alias_maps = hash:/usr/local/etc/postfix/virtual ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: reinstall ports with new options
dick hoogendijk wrote: On 12 Aug RYAN vAN GINNEKEN wrote: I am reinstalling some ports and need new options namely cyrus sasl2 think i remember there being a nice screen that poped up asking which pulgins i want but i cannot get to this screen again. I only want the pwcheck plugin to authenticate with postfix. Have tried make clean make distclean make make install Isn't "make deinstall ; make reinstall" enough ? nope just installs maybe i am mistaken about the options screen has anyone installed this port lately have seem some docs on the net that say i should select only the pwcheck from this screen that does not come up for me. Is there anyway to use checkpassword to authenticate to postfix as i already have it running for bincimap seems to work well is it secure ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
reinstall ports with new options
I am reinstalling some ports and need new options namely cyrus sasl2 think i remember there being a nice screen that poped up asking which pulgins i want but i cannot get to this screen again. I only want the pwcheck plugin to authenticate with postfix. Have tried make clean make distclean make make install The port installed fine but i got no options screen or errors about having the port already installed you know the usual one about do a make deinstall then make reinstall ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
opennssl certs
I have created my own root certificate and key so i can become my own CA. Have created singed certs for my imap smtp and webmail server using the common name computerking.ca. This works fine for mozilla but with microsoft' s outlook and explorer i get errors about the CN name not matching the server name ie the name of the security certificate is invalid or does not match the name of the site. So now i have tried to create several certs with different CN names ( need one for mail.computerking and one for mail1.computerking.ca ) and signing them with the same CA but i get this error. v22.computerking.ca > /usr/local/sslcerts #openssl ca -out name-cert.pem -config ./openssl.cnf -infiles name-req.pem Using configuration from ./openssl.cnf Enter pass phrase for ./private/cakey.pem: Check that the request matches the signature Signature ok The Subject's Distinguished Name is as follows organizationName :PRINTABLE:'Computerking' organizationalUnitName:PRINTABLE:'Computerking Security' localityName :PRINTABLE:'Calgary' stateOrProvinceName :PRINTABLE:'Alberta' countryName :PRINTABLE:'CA' commonName:PRINTABLE:'mail1.computerking.ca' Certificate is to be certified until Aug 9 07:50:02 2014 GMT (3650 days) Sign the certificate? [y/n]:y failed to update database TXT_DB error number 2 Is there a way to make just one cert that will work for microsoft products because the CN computerking.ca does not work for either mail1.computerking.ca or mail.computerking. Everything seems to work fine in Mozilla to bad i have clients that insist on using microsoft. Would an IP address work for microsoft ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
frontpage compile error
tring to install frontpage from the ports get this error get the same error when i try to intall compat3x Patching for frontpage-5.0.2.2623_1 ===> Applying FreeBSD patches for frontpage-5.0.2.2623_1 ===> frontpage-5.0.2.2623_1 depends on shared library: c.3 - not found ===>Verifying install for c.3 in /usr/ports/misc/compat3x ===> compat3x-i386-4.4.20020925 is forbidden: FreeBSD-SA-03:05.xdr, FreeBSD-SA-03:08.realpath - not fixed / no lib available. *** Error code 1 Stop in /usr/ports/misc/compat3x. *** Error code 1 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
emails bouced to bulkmail folder
Need some info on the what the large email severs ie Yahoo and Hotmail use to determine if email is spam. I run a small email server with about 30 clients and when i send email to yahoo it gets bounced to the bulk mail folder like in my maillog below. Jul 5 15:30:19 v22 postfix/smtp[14316]: starting TLS engine Jul 5 15:30:19 v22 postfix/smtp[14316]: C52C23C9: to=<[EMAIL PROTECTED]>, relay=mx2.mail.yahoo.com[64.156.215.8], delay=1, status=sent (250 ok dirdel) Read somewhere that they do a reverse lookup on your ip address for a host name. here is my info for reverse lookup for the ip 209.115.173.22 Non-authoritative answer: 22.173.115.209.in-addr.arpa name = mail1.computerking.ca. Authoritative answers can be found from: 173.115.209.in-addr.arpa nameserver = toad.spots.ab.ca. 173.115.209.in-addr.arpa nameserver = cheetah.spots.ab.ca. toad.spots.ab.ca internet address = 209.115.174.3 cheetah.spots.ab.ca internet address = 209.115.174.2 looking forward for computerking.ca Server: ns1.kloth.net Address: 213.133.98.149#53 Non-authoritative answer: Name: computerking.ca Address: 209.115.173.22 computerking.ca mail exchanger = 10 mail1.computerking.ca. computerking.ca mail exchanger = 20 mail1.shoemasters.computerking.ca. computerking.ca mail exchanger = 30 mail1.highcoup.ca. computerking.ca origin = computerking.ca. mail addr = root.computerking.ca. serial = 2004062001 refresh = 10800 retry = 3600 expire = 604800 minimum = 3600 computerking.ca nameserver = ns1.shoemasters.computerking.ca. computerking.ca nameserver = ns1.computerking.ca. computerking.ca nameserver = ns1.highcoup.ca. Authoritative answers can be found from: computerking.ca nameserver = ns1.highcoup.ca. computerking.ca nameserver = ns1.shoemasters.computerking.ca. computerking.ca nameserver = ns1.computerking.ca. mail1.computerking.ca internet address = 209.115.173.22 mail1.shoemasters.computerking.ca internet address = 68.144.231.38 Does it have something to do with the fact that my ISP is running the NS for reverse lookup and my own nameservers take care of things for forward lookups. Should i see if i can run my own nameservers for reverse lookup as well. What is it that yahoo does not like about my setup. please someone help me i do not know what could be wrong and have switched ISP's to try and solve this problem but so far it has not worked. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
SICK SERVER
I use freebsd 4.8 stable as a server it runs many services or used to, Apache, bincimap, postfix, just to name a few. It seems to run natd and route packets ok to the internal network that it is attached too. However I does not seem to be functioning properly as a web server or email server. Mostly what i use this machine for is a backup nameserver and email server but none of these services are functioning correctly. I can still login using my ssh2 program but cannot figure out what is going on please can someone help me troubleshoot this machine. My main concern is that my main mail server went down for about 3 days so the broken server hopefully picked up the mail but does not seem to be able to relay it back to my main server. I am using postfix 2.0.0.19 and have my postfix system secured with TLS and SASL. here is some log from postfix and a postconf -n output rig_to=, relay=none, delay=316608, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 2B41A10390: to=<[EMAIL PROTECTED]>, orig_to=<[EMAIL PROTECTED]>, relay=none, delay=316598, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 2F2E810391: to=<[EMAIL PROTECTED]>, orig_to=<[EMAIL PROTECTED]>, relay=none, delay=316598, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 1F72A10342: to=<[EMAIL PROTECTED]>, orig_to=, relay=none, delay=57410, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 06F8910346: to=<[EMAIL PROTECTED]>, orig_to=<[EMAIL PROTECTED]>, relay=none, delay=311601, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 0AA07103A2: to=<[EMAIL PROTECTED]>, orig_to=, relay=none, delay=92298, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) v21.highcoup.ca > /etc #postconf -n alias_maps = hash:/etc/mail/aliases broken_sasl_auth_clients = yes command_directory = /usr/local/sbin config_directory = /usr/local/etc/postfix daemon_directory = /usr/local/libexec/postfix debug_peer_level = 2 default_privs = nobody home_mailbox = Maildir/INBOX/ html_directory = no inet_interfaces = all local_recipient_maps = $alias_maps unix:passwd.byname mail_owner = postfix mail_spool_directory = /var/mail mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain $mydomain mydomain = highcoup.ca myhostname = mail1.highcoup.ca mynetworks_style = subnet myorigin = $mydomain newaliases_path = /usr/local/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relay_domains = $mydestination, computerking.ca, shoemasters.computerking.ca sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtp_tls_loglevel = 3 smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_recipient_restrictions = permit_mx_backup, permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $mydomain smtpd_sasl_security_options = noanonymous smtpd_sender_restrictions = permit_mx_backup, permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_tls_CAfile = /usr/local/etc/postfix/smtpd.pem smtpd_tls_ask_ccert = yes smtpd_tls_auth_only = yes smtpd_tls_cert_file = /usr/local/etc/postfix/smtpd.pem smtpd_tls_key_file = /usr/local/etc/postfix/smtpd.pem smtpd_tls_loglevel = 2 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = no tls_random_source = dev:/dev/urandom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
SICK SERVER
I use freebsd 4.8 stable as a server it runs many services or used to, Apache, bincimap, postfix, just to name a few. It seems to run natd and route packets ok to the internal network that it is attached too. However I does not seem to be functioning properly as a web server or email server. Mostly what i use this machine for is a backup nameserver and email server but none of these services are functioning correctly. I can still login using my ssh2 program but cannot figure out what is going on please can someone help me troubleshoot this machine. My main concern is that my main mail server went down for about 3 days so the broken server hopefully picked up the mail but does not seem to be able to relay it back to my main server. I am using postfix 2.0.0.19 and have my postfix system secured with TLS and SASL. here is some log from postfix and a postconf -n output rig_to=, relay=none, delay=316608, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 2B41A10390: to=<[EMAIL PROTECTED]>, orig_to=<[EMAIL PROTECTED]>, relay=none, delay=316598, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 2F2E810391: to=<[EMAIL PROTECTED]>, orig_to=<[EMAIL PROTECTED]>, relay=none, delay=316598, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 1F72A10342: to=<[EMAIL PROTECTED]>, orig_to=, relay=none, delay=57410, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 06F8910346: to=<[EMAIL PROTECTED]>, orig_to=<[EMAIL PROTECTED]>, relay=none, delay=311601, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) Jun 20 19:04:13 v21 postfix/qmgr[1092]: 0AA07103A2: to=<[EMAIL PROTECTED]>, orig_to=, relay=none, delay=92298, status=deferred (delivery temporarily suspended: connect to mail1.shoemasters.computerking.ca[68.144.231.38]: Operation timed out) v21.highcoup.ca > /etc #postconf -n alias_maps = hash:/etc/mail/aliases broken_sasl_auth_clients = yes command_directory = /usr/local/sbin config_directory = /usr/local/etc/postfix daemon_directory = /usr/local/libexec/postfix debug_peer_level = 2 default_privs = nobody home_mailbox = Maildir/INBOX/ html_directory = no inet_interfaces = all local_recipient_maps = $alias_maps unix:passwd.byname mail_owner = postfix mail_spool_directory = /var/mail mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man mydestination = $myhostname, localhost.$mydomain $mydomain mydomain = highcoup.ca myhostname = mail1.highcoup.ca mynetworks_style = subnet myorigin = $mydomain newaliases_path = /usr/local/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relay_domains = $mydestination, computerking.ca, shoemasters.computerking.ca sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtp_tls_loglevel = 3 smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_recipient_restrictions = permit_mx_backup, permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $mydomain smtpd_sasl_security_options = noanonymous smtpd_sender_restrictions = permit_mx_backup, permit_sasl_authenticated,permit_mynetworks, reject_unauth_destination smtpd_tls_CAfile = /usr/local/etc/postfix/smtpd.pem smtpd_tls_ask_ccert = yes smtpd_tls_auth_only = yes smtpd_tls_cert_file = /usr/local/etc/postfix/smtpd.pem smtpd_tls_key_file = /usr/local/etc/postfix/smtpd.pem smtpd_tls_loglevel = 2 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = no tls_random_source = dev:/dev/urandom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: startssl at boot time
04] [info] removed PID file /var/run/httpd.pid (pid=5942) [Thu Apr 08 18:00:20 2004] [notice] caught SIGTERM, shutting down and there is no apache not ssl or regular so i run apache start i get this in the logs and still no apache ssl however regular apache works fine [Thu Apr 08 18:19:07 2004] [info] mod_unique_id: using ip addr 192.168.0.202 [Thu Apr 08 18:19:08 2004] [info] Init: Initializing OpenSSL library [Thu Apr 08 18:19:08 2004] [info] Init: Seeding PRNG with 0 bytes of entropy [Thu Apr 08 18:19:08 2004] [info] Init: Generating temporary RSA private keys (512/10 [Thu Apr 08 18:19:10 2004] [info] Init: Generating temporary DH parameters (512/1024 [Thu Apr 08 18:19:10 2004] [warn] Init: Session Cache is not configured [hint: SSLSes [Thu Apr 08 18:19:10 2004] [info] Init: Initializing (virtual) servers for SSL [Thu Apr 08 18:19:10 2004] [info] Server: Apache/2.0.49, Interface: mod_ssl/2.0.49, L [Thu Apr 08 18:19:10 2004] [info] mod_unique_id: using ip addr 192.168.0.202 [Thu Apr 08 18:19:11 2004] [info] Init: Initializing OpenSSL library [Thu Apr 08 18:19:11 2004] [info] Init: Seeding PRNG with 0 bytes of entropy [Thu Apr 08 18:19:11 2004] [info] Init: Generating temporary RSA private keys (512/10 [Thu Apr 08 18:19:12 2004] [info] Init: Generating temporary DH parameters (512/1024 [Thu Apr 08 18:19:12 2004] [info] Init: Initializing (virtual) servers for SSL [Thu Apr 08 18:19:12 2004] [info] Server: Apache/2.0.49, Interface: mod_ssl/2.0.49, L [Thu Apr 08 18:19:12 2004] [notice] Apache/2.0.49 (Unix) PHP/4.3.5 mod_ssl/2.0.49 Ope [Thu Apr 08 18:19:12 2004] [info] Server built: Mar 30 2004 04:02:47 [Thu Apr 08 18:19:12 2004] [debug] prefork.c(955): AcceptMutex: flock (default: flock then i run apachectl stop followed by startssl and get this in the logs and everthing works great ssl and none ssl [Thu Apr 08 18:23:05 2004] [info] removed PID file /var/run/httpd.pid (pid=295) [Thu Apr 08 18:23:05 2004] [notice] caught SIGTERM, shutting down [Thu Apr 08 18:23:09 2004] [info] mod_unique_id: using ip addr 192.168.0.202 [Thu Apr 08 18:23:10 2004] [info] Init: Initializing OpenSSL library [Thu Apr 08 18:23:10 2004] [info] Init: Seeding PRNG with 136 bytes of entropy [Thu Apr 08 18:23:10 2004] [info] Init: Generating temporary RSA private keys (512/10 [Thu Apr 08 18:23:11 2004] [info] Init: Generating temporary DH parameters (512/1024 [Thu Apr 08 18:23:11 2004] [debug] ssl_scache_dbm.c(403): Inter-Process Session Cache [Thu Apr 08 18:23:11 2004] [info] Init: Initializing (virtual) servers for SSL [Thu Apr 08 18:23:11 2004] [info] Server: Apache/2.0.49, Interface: mod_ssl/2.0.49, L [Thu Apr 08 18:23:11 2004] [info] mod_unique_id: using ip addr 192.168.0.202 [Thu Apr 08 18:23:12 2004] [info] Init: Initializing OpenSSL library [Thu Apr 08 18:23:12 2004] [info] Init: Seeding PRNG with 136 bytes of entropy [Thu Apr 08 18:23:12 2004] [info] Init: Generating temporary RSA private keys (512/10 [Thu Apr 08 18:23:13 2004] [info] Init: Generating temporary DH parameters (512/1024 [Thu Apr 08 18:23:13 2004] [debug] ssl_scache_dbm.c(403): Inter-Process Session Cache [Thu Apr 08 18:23:13 2004] [info] Init: Initializing (virtual) servers for SSL [Thu Apr 08 18:23:13 2004] [info] Server: Apache/2.0.49, Interface: mod_ssl/2.0.49, L [Thu Apr 08 18:23:13 2004] [notice] Apache/2.0.49 (Unix) PHP/4.3.5 mod_ssl/2.0.49 Ope [Thu Apr 08 18:23:13 2004] [info] Server built: Mar 30 2004 04:02:47 [Thu Apr 08 18:23:13 2004] [debug] prefork.c(955): AcceptMutex: flock (default: flock Matthew Seaman wrote: On Wed, Apr 07, 2004 at 04:58:24PM -0600, RYAN vAN GINNEKEN wrote: THANKS but i already have that line in my rc.conf file and the log entries that i have submitted to this list are not from a reboot but rather apachectl stop and start or startssl. So when i run a startssl i get the randomness i need however when i just use apachectl start which is 99.9% the same command it does not. honestly i am stumped hope you have some more wisdom to share. There is also the line about ssl cache i have do some googleing but have not been able to come up with anything that helps. That's most odd. As you say, the apache2.sh script essentially just runs 'apachectl start' for you. Or, at least, that's what it's meant to do. There must be something different about what it is doing. Hmmm... Can you show us the output from: # sh -x /usr/local/etc/rc.d/apache2.sh start (make sure apache is not running before you type that) Cheers, Matthew ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: startssl at boot time
THANKS but i already have that line in my rc.conf file and the log entries that i have submitted to this list are not from a reboot but rather apachectl stop and start or startssl. So when i run a startssl i get the randomness i need however when i just use apachectl start which is 99.9% the same command it does not. honestly i am stumped hope you have some more wisdom to share. There is also the line about ssl cache i have do some googleing but have not been able to come up with anything that helps. Matthew Seaman wrote: On Wed, Apr 07, 2004 at 03:39:42PM -0600, RYAN vAN GINNEKEN wrote: Seems to initialize ssl but my ssl page still does not work however my regular page does work. Here is a print out of the log file when i do an apachectl stop and apachectl startssl. when i use startssl everything work great including my ssl page. [Wed Apr 07 13:20:08 2004] [info] Init: Seeding PRNG with 0 bytes of entropy [Wed Apr 07 13:20:08 2004] [warn] Init: Session Cache is not configured [hint: SSLSess The fact that you can do an apachectl startssl and have everything work as desired means that you're 99.99% of the way to gettting it all to work. The modification to the apache2.sh script I sent you last time sould force that script to always run 'apachectl startssl' itself, so that shouldn't be the problem. Hmmm... I think that perhaps the problem arises from when the apache2.sh script is run. I'm guessing that the 'Seeding PRNG' line is significant -- it aparently means that there is no random data yet available from /dev/random at the point when apache is started up in the boot sequence. As you're running 4.9, that can be cured by telling the system to use some appropriate IRQs as sources of randomness. First run: % vmstat -i and look for the IRQs where there are a lot of interrupts generated. Not the 'clk' or 'rtc' interrupts, as those are clock ticks, firing at regular intervals, which is worse than useless as a source of randomness. I find that irq12 (psm0 -- the mouse), irq1 (atkbd0 -- the keyboard), irq11 (mux -- multiplex: but this is network activity mostly) and irq15 (mux -- multiplex again, but disk activity mostly) work well for me, but you will have to choose 2 or 3 or 4 suitable IRQs on your own system to harvest for randomness. Then add them to /etc/rc.conf rand_irqs="1 11 12 15" Then reboot. (See rndcontrol(8) for more details) With luck, and a following wind, there will be sufficient system activity during startup that there will be sufficient random data available to prime the PRNG used by OpenSSL, which should let apache start up automatically. Cheers, Matthew ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: startssl at boot time
This is right ??? the reason i ask is because apache does not start on a
reboot no ssl or even regular apache. here is the log output of an
apache stop then apache start using the script listed below when i use
apache start only regular apache starts so i then have to issue the
apache startssl command.
[Wed Apr 07 13:20:01 2004] [info] removed PID file /var/run/httpd.pid
(pid=3196)
[Wed Apr 07 13:20:01 2004] [notice] caught SIGTERM, shutting down
[Wed Apr 07 13:20:07 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:20:08 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:20:08 2004] [info] Init: Seeding PRNG with 0 bytes of entropy
[Wed Apr 07 13:20:08 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:20:08 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:20:08 2004] [warn] Init: Session Cache is not configured
[hint: SSLSess
[Wed Apr 07 13:20:08 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:20:08 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:20:09 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:20:10 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:20:10 2004] [info] Init: Seeding PRNG with 0 bytes of entropy
[Wed Apr 07 13:20:10 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:20:12 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:20:12 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:20:12 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:20:13 2004] [notice] Apache/2.0.49 (Unix) PHP/4.3.5
mod_ssl/2.0.49 Open
[Wed Apr 07 13:20:13 2004] [info] Server built: Mar 30 2004 04:02:47
[Wed Apr 07 13:20:13 2004] [debug] prefork.c(955): AcceptMutex: flock
(default: flock)
Seems to initialize ssl but my ssl page still does not work however my
regular page does work. Here is a print out of the log file when i do
an apachectl stop and apachectl startssl. when i use startssl
everything work great including my ssl page.
[Wed Apr 07 13:23:21 2004] [info] removed PID file /var/run/httpd.pid
(pid=3227)
[Wed Apr 07 13:23:21 2004] [notice] caught SIGTERM, shutting down
[Wed Apr 07 13:23:26 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:23:27 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:23:27 2004] [info] Init: Seeding PRNG with 136 bytes of
entropy
[Wed Apr 07 13:23:27 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:23:29 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:23:29 2004] [debug] ssl_scache_dbm.c(403): Inter-Process
Session Cache
[Wed Apr 07 13:23:29 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:23:29 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:23:30 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:23:31 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:23:31 2004] [info] Init: Seeding PRNG with 136 bytes of
entropy
[Wed Apr 07 13:23:31 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:23:31 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:23:31 2004] [debug] ssl_scache_dbm.c(403): Inter-Process
Session Cache
[Wed Apr 07 13:23:31 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:23:31 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:23:31 2004] [notice] Apache/2.0.49 (Unix) PHP/4.3.5
mod_ssl/2.0.49 Open
[Wed Apr 07 13:23:31 2004] [info] Server built: Mar 30 2004 04:02:47
[Wed Apr 07 13:23:31 2004] [debug] prefork.c(955): AcceptMutex: flock
(default: flock)
here are the differences in the logs did this manually will have to
spend some time using the diff command as it could work for comparing
log entries too right? So it must have something to do with the entropy
and the session cache i guess.
[Wed Apr 07 13:20:08 2004] [info] Init: Seeding PRNG with 0 bytes of entropy
[Wed Apr 07 13:20:08 2004] [warn] Init: Session Cache is not configured
[hint: SSLSess
Matthew Seaman wrote:
On Tue, Apr 06, 2004 at 12:04:58AM -0600, RYAN vAN GINNEKEN wrote:
Patch guess i am new to patches in fact this is my first one usually
just install the port as is and hope that all the patches are added.
Have compiled a few packages from source but would rather not.
Oh i think i get it it looks like mergemaster the + gets added and the -
gets removed right i will do manually will that work NOPE
please explain how i apply the patch works as i tried to manually edit
the config file and apache did not start at all thank you in advance.
Below is a copy of the edited apache2.sh file.
#!/bin/sh
PREFIX=/usr/local
case "$1" in
start)
SSL=ssl
[ -x ${PREFIX}/sbin/apachectl ] &
Re: startssl at boot time
This is right ??? the reason i ask is because apache does not start on a
reboot no ssl or even regular apache. here is the log output of an
apache stop then apache start using the script listed below when i use
apache start only regular apache starts so i then have to issue the
apache startssl command.
[Wed Apr 07 13:20:01 2004] [info] removed PID file /var/run/httpd.pid
(pid=3196)
[Wed Apr 07 13:20:01 2004] [notice] caught SIGTERM, shutting down
[Wed Apr 07 13:20:07 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:20:08 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:20:08 2004] [info] Init: Seeding PRNG with 0 bytes of entropy
[Wed Apr 07 13:20:08 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:20:08 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:20:08 2004] [warn] Init: Session Cache is not configured
[hint: SSLSess
[Wed Apr 07 13:20:08 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:20:08 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:20:09 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:20:10 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:20:10 2004] [info] Init: Seeding PRNG with 0 bytes of entropy
[Wed Apr 07 13:20:10 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:20:12 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:20:12 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:20:12 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:20:13 2004] [notice] Apache/2.0.49 (Unix) PHP/4.3.5
mod_ssl/2.0.49 Open
[Wed Apr 07 13:20:13 2004] [info] Server built: Mar 30 2004 04:02:47
[Wed Apr 07 13:20:13 2004] [debug] prefork.c(955): AcceptMutex: flock
(default: flock)
Seems to initialize ssl but my ssl page still does not work however my
regular page does work. Here is a print out of the log file when i do
an apachectl stop and apachectl startssl. when i use startssl
everything work great including my ssl page.
[Wed Apr 07 13:23:21 2004] [info] removed PID file /var/run/httpd.pid
(pid=3227)
[Wed Apr 07 13:23:21 2004] [notice] caught SIGTERM, shutting down
[Wed Apr 07 13:23:26 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:23:27 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:23:27 2004] [info] Init: Seeding PRNG with 136 bytes of
entropy
[Wed Apr 07 13:23:27 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:23:29 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:23:29 2004] [debug] ssl_scache_dbm.c(403): Inter-Process
Session Cache
[Wed Apr 07 13:23:29 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:23:29 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:23:30 2004] [info] mod_unique_id: using ip addr 192.168.0.202
[Wed Apr 07 13:23:31 2004] [info] Init: Initializing OpenSSL library
[Wed Apr 07 13:23:31 2004] [info] Init: Seeding PRNG with 136 bytes of
entropy
[Wed Apr 07 13:23:31 2004] [info] Init: Generating temporary RSA private
keys (512/102
[Wed Apr 07 13:23:31 2004] [info] Init: Generating temporary DH
parameters (512/1024 b
[Wed Apr 07 13:23:31 2004] [debug] ssl_scache_dbm.c(403): Inter-Process
Session Cache
[Wed Apr 07 13:23:31 2004] [info] Init: Initializing (virtual) servers
for SSL
[Wed Apr 07 13:23:31 2004] [info] Server: Apache/2.0.49, Interface:
mod_ssl/2.0.49, Li
[Wed Apr 07 13:23:31 2004] [notice] Apache/2.0.49 (Unix) PHP/4.3.5
mod_ssl/2.0.49 Open
[Wed Apr 07 13:23:31 2004] [info] Server built: Mar 30 2004 04:02:47
[Wed Apr 07 13:23:31 2004] [debug] prefork.c(955): AcceptMutex: flock
(default: flock)
here are the differences in the logs did this manually will have to
spend some time using the diff command as it could work for comparing
log entries too right? So it must have something to do with the entropy
and the session cache i guess.
[Wed Apr 07 13:20:08 2004] [info] Init: Seeding PRNG with 0 bytes of entropy
[Wed Apr 07 13:20:08 2004] [warn] Init: Session Cache is not configured
[hint: SSLSess
Matthew Seaman wrote:
On Tue, Apr 06, 2004 at 12:04:58AM -0600, RYAN vAN GINNEKEN wrote:
Patch guess i am new to patches in fact this is my first one usually
just install the port as is and hope that all the patches are added.
Have compiled a few packages from source but would rather not.
Oh i think i get it it looks like mergemaster the + gets added and the -
gets removed right i will do manually will that work NOPE
please explain how i apply the patch works as i tried to manually edit
the config file and apache did not start at all thank you in advance.
Below is a copy of the edited apache2.sh file.
#!/bin/sh
PREFIX=/usr/local
case "$1" in
start)
SSL=ssl
[ -x ${PREFIX}/sbin/apachectl ] &
Re: startssl at boot time
Matthew Seaman wrote:
On Sat, Apr 03, 2004 at 02:53:15PM -0700, RYAN vAN GINNEKEN wrote:
I use freebsd 4.9 stable and apache 2.0.0.49 with mod_ssl when i type
startssl everything seems to work ie my non ssl sites and my ssl site.
However on reboot my ssl site does not come up until i run apachectl
stop and then apachectl startssl. How do i make apache start the ssl
stuff at boot time THANK YOU in advance.
Apply this patch to /usr/local/etc/rc.d/apache2.sh:
% diff -u apache2.sh.orig apache2.sh
--- apache2.sh.orig Sun Apr 4 12:20:39 2004
+++ apache2.sh Sun Apr 4 12:20:54 2004
@@ -3,7 +3,7 @@
case "$1" in
start)
- [ "ssl" = "ssl" -a -f "$PREFIX/etc/apache2/ssl.crt/server.crt" ] && SSL=ssl
+ SSL=ssl
[ -x ${PREFIX}/sbin/apachectl ] && ${PREFIX}/sbin/apachectl start${SSL} > /dev/null
&& echo -n ' apache2'
;;
stop)
which just stops the port trying to be clever about autodetecting if
SSL support is needed, and starts apache up with startssl every time.
Cheers,
Matthew
Patch guess i am new to patches in fact this is my first one usually
just install the port as is and hope that all the patches are added.
Have compiled a few packages from source but would rather not.
Oh i think i get it it looks like mergemaster the + gets added and the -
gets removed right i will do manually will that work NOPE
please explain how i apply the patch works as i tried to manually edit
the config file and apache did not start at all thank you in advance.
Below is a copy of the edited apache2.sh file.
#!/bin/sh
PREFIX=/usr/local
case "$1" in
start)
SSL=ssl
[ -x ${PREFIX}/sbin/apachectl ] && ${PREFIX}/sbin/apachectl
start${SSL} > /dev
;;
stop)
[ -r /var/run/httpd.pid ] && ${PREFIX}/sbin/apachectl stop >
/dev/null && echo
;;
*)
echo "Usage: `basename $0` {start|stop}" >&2
;;
esac
exit 0
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
startssl at boot time
I use freebsd 4.9 stable and apache 2.0.0.49 with mod_ssl when i type startssl everything seems to work ie my non ssl sites and my ssl site. However on reboot my ssl site does not come up until i run apachectl stop and then apachectl startssl. How do i make apache start the ssl stuff at boot time THANK YOU in advance. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
remote restart of natd
Is there a way to restart natd remotely without disconnecting myself using freebsd 4.9 stable. Have been playing around with the natd.conf file and would like to see if it works or not and do not want to reboot EVER.!! or be disconnected ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
remote restart of natd
Is there a way to restart natd remotely without disconnecting myself using freebsd 4.9 stable. Have been playing around with the natd.conf file and would like to see if it works or not and do not want to reboot EVER.!! or be disconnected ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: mounting cdrom drives
Lowell Gilbert wrote: RYAN vAN GINNEKEN <[EMAIL PROTECTED]> writes: Lowell Gilbert wrote: RYAN vAN GINNEKEN <[EMAIL PROTECTED]> writes: I have this in my dmesg output acd0: CDROM at ata1-master PIO4 acd1: CDROM at ata1-slave PIO4 but when i try to mount these acd0 i get this error #mount_cd9660 /dev/acd0 /cdrom/cdrom0 mount_cd9660: /dev/acd0: No such file or directory so cd to /dev make device acd0 with this command sh MAKEDEV acd0 seems to work no errors but the device is not created and when i try to mount agian i get this agian #mount_cd9660 /dev/acd0 /cdrom/cdrom0 mount_cd9660: /dev/acd0: No such file or directory Please help What are you running? [Always include the output of 'uname -a' in questions.] What is the output of 'ls /dev/acd*'? v22.computerking.ca > /var/spool #uname -a FreeBSD v22.computerking.ca 4.9-STABLE FreeBSD 4.9-STABLE #1: Thu Mar 4 01:19:45 MST 2004 [EMAIL PROTECTED]:/usr/src/sys/compile/V22.COMPUTERKING.CA i386 [Thu Mar 11] 05:43 PM [0] v22.computerking.ca > /var/spool #ls /dev/acd* /dev/acd0a /dev/acd0c /dev/acd1a /dev/acd1c mount -t cd9660 /dev/acd0c /cdrom/cdrom0 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Thank you now I can mount my cd rom drives and i know how to add them to fstab so they get mounted at boot time. However i have had problems with my system hanging during a reboot if the cd is scratch or dirty. Is there a way to mount these devices with less priority so if they dont work the system will still boot. Have had the same problems with nfs drives as well there must be a way to fix this problem i have of my system hanging forever if the remote files are offline for some reason. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: mounting cdrom drives
Lowell Gilbert wrote: RYAN vAN GINNEKEN <[EMAIL PROTECTED]> writes: I have this in my dmesg output acd0: CDROM at ata1-master PIO4 acd1: CDROM at ata1-slave PIO4 but when i try to mount these acd0 i get this error #mount_cd9660 /dev/acd0 /cdrom/cdrom0 mount_cd9660: /dev/acd0: No such file or directory so cd to /dev make device acd0 with this command sh MAKEDEV acd0 seems to work no errors but the device is not created and when i try to mount agian i get this agian #mount_cd9660 /dev/acd0 /cdrom/cdrom0 mount_cd9660: /dev/acd0: No such file or directory Please help What are you running? [Always include the output of 'uname -a' in questions.] What is the output of 'ls /dev/acd*'? v22.computerking.ca > /var/spool #uname -a FreeBSD v22.computerking.ca 4.9-STABLE FreeBSD 4.9-STABLE #1: Thu Mar 4 01:19:45 MST 2004 [EMAIL PROTECTED]:/usr/src/sys/compile/V22.COMPUTERKING.CA i386 [Thu Mar 11] 05:43 PM [0] v22.computerking.ca > /var/spool #ls /dev/acd* /dev/acd0a /dev/acd0c /dev/acd1a /dev/acd1c ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mounting cdrom drives
I have this in my dmesg output acd0: CDROM at ata1-master PIO4 acd1: CDROM at ata1-slave PIO4 but when i try to mount these acd0 i get this error #mount_cd9660 /dev/acd0 /cdrom/cdrom0 mount_cd9660: /dev/acd0: No such file or directory so cd to /dev make device acd0 with this command sh MAKEDEV acd0 seems to work no errors but the device is not created and when i try to mount agian i get this agian #mount_cd9660 /dev/acd0 /cdrom/cdrom0 mount_cd9660: /dev/acd0: No such file or directory Please help ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
3com modem
Have a 3com pci internal vioce modem (it is a harware modem) Usrobotics model Model 0727 installed in my 4.9 stable systembut don't seem to be able to activate it sould this not happenautomagically? I do not see it in the dmesg logs at all i am prettysure that comm ports are compiled into the kernel. How do i go aboutckecking it or troubleshooting something that does not appear to be there i need somewhere to start please help. kernel conf # Serial (COM) ports device sio0at isa? port IO_COM1 flags 0x10 irq 4 device sio1at isa? port IO_COM2 irq 3 device sio2at isa? disable port IO_COM3 irq 5 device sio3at isa? disable port IO_COM4 irq 9 dmesg log mabey the first line has something to do with my modem not sure. pci0: (vendor=0x12b9, dev=0x1008) at 15.0 irq 15 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 3com modem
Mike Maltese wrote: It is not a win modem it is a hardware modem and was the best one my supplier had, it cost me $120.00. Thanks for your rely but it does not help me with my problem i have had it working on several other machines just not this one yet. Maybe you should have mentioned that. When someone posts that their internal PCI modem isn't working, 99 times out of 100 it is a winmodem. Are you saying that you had it working on a FreeBSD machine? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" mabey this will help you help me usrobotics model number 0727 sn 23rkg1hbp7vl pn 3cp2976-oem ps THANK YOU ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 3com modem
Mike Maltese wrote: It is not a win modem it is a hardware modem and was the best one my supplier had, it cost me $120.00. Thanks for your rely but it does not help me with my problem i have had it working on several other machines just not this one yet. Maybe you should have mentioned that. When someone posts that their internal PCI modem isn't working, 99 times out of 100 it is a winmodem. Are you saying that you had it working on a FreeBSD machine? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" yes had it working on a freebsd machine about a month ago didnt do anything spacial it was just there. Now on this machine i do not see in my dmesg as i posted earlier ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 3com modem
Mike Maltese wrote: Have a 3com pci internal vioce modem installed in my 4.9 stable system but don't seem to be able to activate it sould this not happen automagically? I do not see it in the dmesg logs at all i am pretty sure that comm ports are compiled into the kernel. How do i go about ckecking it or troubleshooting something that does not appear to be there i need somewhere to start please help. This is more than likely a "winmodem", i.e. it only runs under Windows with drivers. If you want to use a modem with FreeBSD, get an external unit. It is not a win modem it is a hardware modem and was the best one my supplier had, it cost me $120.00. Thanks for your rely but it does not help me with my problem i have had it working on several other machines just not this one yet. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
3com modem
Have a 3com pci internal vioce modem installed in my 4.9 stable system but don't seem to be able to activate it sould this not happen automagically? I do not see it in the dmesg logs at all i am pretty sure that comm ports are compiled into the kernel. How do i go about ckecking it or troubleshooting something that does not appear to be there i need somewhere to start please help. kernel conf # Serial (COM) ports device sio0at isa? port IO_COM1 flags 0x10 irq 4 device sio1at isa? port IO_COM2 irq 3 device sio2at isa? disable port IO_COM3 irq 5 device sio3at isa? disable port IO_COM4 irq 9 dmesg log mabey the first line has something to do with my modem not sure. pci0: (vendor=0x12b9, dev=0x1008) at 15.0 irq 15 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mounting
I know there is there a way to mount a cd-rom drive automagiclly on reboot. However i need to know how to do it so that if the cd is scratched or the drive is busted my machine will not hang up. Also i have the same problems with my nfs mounts if a machine goes down somewhere now of my other machines will reboot. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ipfw rules
I know this has probably been posted 1000's of times but i would like to set up a ipfw firewall i run many services on this machine. It acts as a gateway for my network APACHE web server IMAP mail server SMTP mail server BIND name server FTP server also i would like to be able to forward packets to a machine on my network for VNC and also gaming purposes. Just interested in where to find some good rules sets and documentation on the subject THANK YOU. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
UDMA error
I run FreeBSD 4.9 and keep getting this message in my dmesg both the cable and the drive are cable of UDMA 100 at least and the board is a newer Intel 865 chip set. Do i have to configure something in my kernel or what?? ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 38204MB [77622/16/63] at ata0-master UDMA33 acd0: CD-RW at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: firewall problem??
Thank you for your reply Here is my kernel config file well just the options i added do you need more of it? which samples are you refering to and how come i never had problems like this before?? options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPDIVERT #optionsTCP_DROP_SYNFIN Kris Kennaway wrote: On Tue, Mar 02, 2004 at 03:03:37AM -0700, RYAN vAN GINNEKEN wrote: Contents of my rc.conf file are included below. This machine is eventually going to be a server (sendmail bind apache samba ) for a differnt network so lots of stuff is commented out. I am new at running more than on BSD box on the same network and not sure if i need natd or firewall enabled. You didn't include your kernel config file, but the default firewall behaviour is to deny all traffic. There's a kernel config option to change this - see the sample config files. Kris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
firewall problem??
Built a new freebsd 4.9 stable machine got it working ok could send and recieve packets and the like. Did a cvsup and make world on it now it does not seem to be sending or recieveing anything. Have been playing around with it now for several weeks off and on. With a fresh reboot it does not seem too send or recieve anything when i try to ping google.ca i get cannot resolve google.ca :host name lookup failure when i ping 192.168.0.202 my gateway i get ping: send to: permission denied Seeing these error i think it must be firewalling everything out even me so I issue the following command. ipfw add 00100 allow ip from any to any Great now i can ping google and my own machines also most important i can login remotely. ipfw shows this v23# ipfw show 00100 291 27273 allow ip from any to any 65535 77 11673 deny ip from any to any contents of /etc/resolv.conf are as follows. search computerking.ca nameserver 192.168.0.202 nameserver 24.71.223.144 nameserver 24.71.223.144 Contents of my rc.conf file are included below. This machine is eventually going to be a server (sendmail bind apache samba ) for a differnt network so lots of stuff is commented out. I am new at running more than on BSD box on the same network and not sure if i need natd or firewall enabled. # #/etc/rc.conf @V23.computerking.ca #== #-- System #-- hostname="v23.computerking.ca" defaultrouter="192.168.0.202" ifconfig_fxp0="DHCP" ntpdate_enable="YES" ntpdate_flags="ntp1.cmc.ec.gc.ca" sshd_enable="YES" #kern_securelevel_enable="NO" #-- #Server firewall and natd #-- #ifconfig_xl0="inet 192.168.0.202 netmask 255.255.255.0" #gateway_enable="YES" #firewall_enable="YES" #firewall_type="OPEN" #firewall_quiet="NO" #firewall_script="/etc/rc.firewall" #natd_enable="YES" #natd_interface="fxp0" #natd_flags="-f /etc/natd.conf #== # end of file ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
make world
On Wed, Feb 25, 2004 at 02:16:45AM -0700, RYAN vAN GINNEKEN wrote: [...] when i try to ping google.ca i get cannot resolve google.ca :host name lookup failure doing an ifconfig i get no inet or subnet just the active status my firewall stuff in dmesg looks like this IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default seems like a firewall problem not getting anything unusual in my /var/log/messages What's the contents of /etc/resolv.conf? Have you got named running? What's the output of "ipfw show"? You haven't given us enough information to help us help you. -- Jonathan Chen <[EMAIL PROTECTED]> "We laugh in the face of danger, we drop icecubes down the vest of fear" - Edmond Blackadder III ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Firstly thanks for your reply, contents of /etc/resolv.conf are as follows. search computerking.ca nameserver 192.168.0.202 nameserver 24.71.223.144 nameserver 24.71.223.144 If i am not mistaken my server (192.168.0.202 or computerking.ca) that runs FreeBSD as well provides that information through the dhcpd? I do not have named running on that machine but instead on the fore mentioned server. ipfw show outputs the following line what the ??? 65535 0 0 deny ip from any to any that doesn't look right does it??? can you help me fix this??? On Wed, Feb 25, 2004 at 02:16:45AM -0700, RYAN vAN GINNEKEN wrote: when i ping i get no route to host >I'm not aware how you could network without an ip address and subnet >mask. What's the exact output of ifconfig? What is your /etc/rc.conf? >Specifically, what lines are there of the form: >ifconfig_[interface name]="inet [ip address] netmask [subnet mask]" >and >defaultrouter="[router address]" >Have you tried using ifconfig to give an ip address to your >interface(s)? >PWR the ifconfig does not give me any ipadresses that is what puzzles me. The rc.conf stuff is ok too, and it worked before the make world i have not changed it. something to do with ipfw it think but i do not know much about that or if it is even the problem. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
re:re:make world
Firstly thanks for your reply, contents of /etc/resolv.conf are as follows. search computerking.ca nameserver 192.168.0.202 nameserver 24.71.223.144 nameserver 24.71.223.144 If i am not mistaken my server (192.168.0.202 or computerking.ca) that runs FreeBSD as well provides that information through the dhcpd? I do not have named running on that machine but instead on the fore mentioned server. ipfw show outputs the following line what the ??? 65535 0 0 deny ip from any to any that doesn't look right does it??? can you help me fix this??? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
make world
I just finished making the world on a new install of FreeBSD 4.9 and now i cannot get my network to work. Everything worked fine before the make world. Seem to remember this happening to me before but can't remember how i fixed it. Must have something to do with mergemaster and the new etc files someone please help. when i try to ping google.ca i get cannot resolve google.ca :host name lookup failure doing an ifconfig i get no inet or subnet just the active status my firewall stuff in dmesg looks like this IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default seems like a firewall problem not getting anything unusual in my /var/log/messages please any hints would be appreciated ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
custom kernel
Hello I use FreeBSD 4.9 Stable and am tring to compile a custom kernel but get the following error. Also i am running a Intel865glcl with a cleron 2.4 the board supports hyperthreading do the chip and operating system. bp.o: In function `sbp_probe_target': sbp.o(.text+0x750): undefined reference to `xpt_freeze_devq' sbp.o(.text+0x822): undefined reference to `xpt_freeze_devq' sbp.o: In function `sbp_cam_scan_lun': sbp.o(.text+0xc5f): undefined reference to `xpt_setup_ccb' sbp.o(.text+0xc68): undefined reference to `xpt_action' sbp.o(.text+0xc75): undefined reference to `xpt_release_devq' sbp.o: In function `sbp_cam_scan_target': sbp.o(.text+0xcff): undefined reference to `xpt_setup_ccb' sbp.o(.text+0xd21): undefined reference to `xpt_action' sbp.o(.text+0xd2e): undefined reference to `xpt_release_devq' sbp.o: In function `sbp_do_attach': sbp.o(.text+0xdc0): undefined reference to `xpt_periph' sbp.o(.text+0xdc9): undefined reference to `xpt_create_path' sbp.o: In function `sbp_agent_reset_callback': sbp.o(.text+0xe9b): undefined reference to `xpt_release_devq' sbp.o: In function `sbp_orb_pointer': sbp.o(.text+0x10ca): undefined reference to `xpt_done' sbp.o: In function `sbp_recv1': sbp.o(.text+0x1b09): undefined reference to `xpt_freeze_devq' sbp.o(.text+0x1dd2): undefined reference to `xpt_done' sbp.o: In function `sbp_attach': sbp.o(.text+0x1eef): undefined reference to `cam_simq_alloc' sbp.o(.text+0x1f48): undefined reference to `cam_sim_alloc' sbp.o(.text+0x1f58): undefined reference to `cam_simq_free' sbp.o(.text+0x1f6a): undefined reference to `xpt_bus_register' sbp.o(.text+0x1f85): undefined reference to `xpt_periph' sbp.o(.text+0x1f8e): undefined reference to `xpt_create_path' sbp.o(.text+0x206e): undefined reference to `cam_sim_free' sbp.o: In function `sbp_detach': sbp.o(.text+0x219c): undefined reference to `xpt_free_path' sbp.o(.text+0x21ad): undefined reference to `xpt_bus_deregister' sbp.o: In function `sbp_cam_detach_target': sbp.o(.text+0x2395): undefined reference to `xpt_release_devq' sbp.o(.text+0x23ab): undefined reference to `xpt_async' sbp.o(.text+0x23b3): undefined reference to `xpt_free_path' sbp.o: In function `sbp_target_reset': sbp.o(.text+0x2410): undefined reference to `xpt_freeze_devq' sbp.o: In function `sbp_timeout': sbp.o(.text+0x2504): undefined reference to `xpt_freeze_devq' sbp.o: In function `sbp_action1': sbp.o(.text+0x2af5): undefined reference to `xpt_done' sbp.o(.text+0x2b05): undefined reference to `xpt_done' sbp.o: In function `sbp_abort_ocb': sbp.o(.text+0x30b2): undefined reference to `xpt_done' umass.o: In function `umass_cam_attach_sim': umass.o(.text+0x142b): undefined reference to `cam_simq_alloc' umass.o(.text+0x1451): undefined reference to `cam_sim_alloc' umass.o(.text+0x146a): undefined reference to `xpt_bus_register' umass.o(.text+0x147a): undefined reference to `cam_simq_free' umass.o: In function `umass_cam_rescan_callback': umass.o(.text+0x1493): undefined reference to `xpt_free_path' umass.o: In function `umass_cam_rescan': umass.o(.text+0x14dd): undefined reference to `xpt_periph' umass.o(.text+0x14e6): undefined reference to `xpt_create_path' umass.o(.text+0x14f9): undefined reference to `xpt_setup_ccb' umass.o(.text+0x1514): undefined reference to `xpt_action' umass.o: In function `umass_cam_detach_sim': umass.o(.text+0x15cb): undefined reference to `xpt_bus_deregister' umass.o(.text+0x15e9): undefined reference to `cam_sim_free' umass.o: In function `umass_cam_detach': umass.o(.text+0x162a): undefined reference to `xpt_create_path' umass.o(.text+0x164b): undefined reference to `xpt_async' umass.o(.text+0x1653): undefined reference to `xpt_free_path' umass.o: In function `umass_cam_action': umass.o(.text+0x19d3): undefined reference to `xpt_done' umass.o(.text+0x19e5): undefined reference to `xpt_done' umass.o: In function `umass_cam_cb': umass.o(.text+0x1afd): undefined reference to `xpt_done' umass.o: In function `umass_cam_sense_cb': umass.o(.text+0x1c04): undefined reference to `xpt_done' umass.o(.text+0x1c15): undefined reference to `xpt_done' umass.o(.text+0x1c2f): more undefined references to `xpt_done' follow *** Error code 1 Stop in /usr/src/sys/compile/V23.COMPUTERKING.CA. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
cvsup problems
I just installed freebsd 4.9 is it the stable branch right now ??? I have been tring to update everything useing cvsup and keep getting the following error below is the important bits to my supfile Release not specified for collection "cvsup7.FreeBSD.org" # $FreeBSD: V21 /usr/local/etc/cvsup/sup-all ver 1.1 2003/11/17 rmvg #== # IMPORTANT: Change the next line to use one of the CVSup mirror sites # listed at http://www.freebsd.org/doc/handbook/mirrors.html. #cvsup1.FreeBSD.org cvsup7.FreeBSD.org (maintainer John Polstra <[EMAIL PROTECTED]>), Washington state #cvsup2.jp.FreeBSD.org (maintainer Masafumi NAKANE <[EMAIL PROTECTED]>) #cvsup.ca.FreeBSD.org ### # # DANGER! WARNING! LOOK OUT! VORSICHT! # # If you add any of the ports or doc collections to this file, be sure to # specify them with a "tag" value set to ".", like this: # # ports-all tag=. # doc-all tag=. # # If you leave out the "tag=." portion, CVSup will delete all of # the files in your ports or doc tree. That is because the ports and doc # collections do not use the same tags as the main part of the FreeBSD # source tree. # ### *default host=cvsup.ca.FreeBSD.org *default prefix=/usr # The following line is for 4-stable. *default release=cvs tag=RELENG_4 *default delete use-rel-suffix #-- # sources files #-- src-usrsbin src-all ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ports problems
when i run portsdb -Uu i get many errors like the one below is there anyone who can help me ileroller-2.4.2_1,1:"/usr/ports/x11-toolkits/pango" non-existent -- dependency list incomplete fileroller-2.4.2_1,1:"/usr/ports/x11-toolkits/gtk20" non-existent -- dependency list incomplete fileroller-2.4.2_1,1:"/usr/ports/graphics/libgnomecanvas" non-existent -- dependency list incomplete fileroller-2.4.2_1,1:"/usr/ports/graphics/libart_lgpl2" non-existent -- dependency list incomplete fileroller-2.4.2_1,1:"/usr/ports/x11/libgnome" non-existent -- dependency list incomplete fileroller-2.4.2_1,1:"/usr/ports/x11-toolkits/libbonoboui" non-existent -- dependency list incomplete fileroller-2.4.2_1,1:"/usr/ports/x11-toolkits/libgnomeui" non-existent -- dependency list incomplete ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
/etc/hosts reload ?
after makeing changes to /ect/hosts do you have to reload the file somehow or do the effects take immediately ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
dns question
have dns working perfectly on one system copied the files over to another system made the necessary domain changes but when bind is invoked i cannot ping remote hosts #ping google.ca ping: cannot resolve google.ca: No address associated with name when i do a nslook up i get this it does not matter if the lookup is internal or external have been stumped for a week now can someone please help. #nslookup v21001 Server: v21.highcoup.ca Address: 142.59.20.186 Name:v21001 Served by: - L.ROOT-SERVERS.NET - M.ROOT-SERVERS.NET - A.ROOT-SERVERS.NET - B.ROOT-SERVERS.NET - C.ROOT-SERVERS.NET - D.ROOT-SERVERS.NET - E.ROOT-SERVERS.NET - F.ROOT-SERVERS.NET - G.ROOT-SERVERS.NET - H.ROOT-SERVERS.NET ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: remote mount hangs sysstem
this is my fstabs file could you please explain where i enter and set values for the -R and -b options # See the fstab(5) manual page for important information on automatic mounts # of network filesystems before modifying this file. # # DeviceMountpoint FStype Options Dump Pass# /dev/ad0s2b noneswapsw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s4e /usrufs rw 2 2 /dev/ad0s3e /varufs rw 2 2 proc/proc procfs rw 0 0 #-- #remote mounts #-- v21.higcoup.ca:/usr/src /mnt/v21.highcoup.ca/usr/src nfs r noauto0 0 v21.higcoup.ca:/usr/local/ect /mnt/v21.highcoup.ca/usr/local/etc nfs r noauto0 0 #-- Scott W wrote: RYAN vAN GINNEKEN wrote: Is there a way to mount a cdrom or remote file systems using fstab but not having it crash out the system. example if i have a nfs share set up to another machine and that machine goes down the next time i reboot my system the machine hangs when it cannot find the share and will not allow me to do anything and i have to hook up a monitor and keyboard to get it back the same happens when there is an error on a cd rom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Use the background (-b or bg) and interruptible (-i or intr) options, along with a reasonable timeout. See man mount_nfs for the specifics. Scott ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: remote mount hangs sysstem
So if i set to noauto does it still get mounted or do i have to execute a command later paul beard wrote: On Nov 23, 2003, at 12:13 PM, RYAN vAN GINNEKEN wrote: Is there a way to mount a cdrom or remote file systems using fstab but not having it crash out the system. example if i have a nfs share set up to another machine and that machine goes down the next time i reboot my system the machine hangs when it cannot find the share and will not allow me to do anything and i have to hook up a monitor and keyboard to get it back the same happens when there is an error on a cd rom make sure the entry on /etc/fstab is set to noauto: then the client won't try to mount the filesystem on boot. -- Paul Beard paulbeard [at] mac.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
remote mount hangs sysstem
Is there a way to mount a cdrom or remote file systems using fstab but not having it crash out the system. example if i have a nfs share set up to another machine and that machine goes down the next time i reboot my system the machine hangs when it cannot find the share and will not allow me to do anything and i have to hook up a monitor and keyboard to get it back the same happens when there is an error on a cd rom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mailbox location problems
I run freebsd 4.8 and postfix 2.something when i try to access my mail useing mail version Mail version 8.1 6/6/93 i always have 0 messageseven though i have sent several messages and watched them being received and sent to maildir in the mailog file Nov 16 14:07:55 v21 postfix/master[193]: daemon started -- version 2.0.16 Nov 16 14:19:52 v21 postfix/smtpd[226]: connect from shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:52 v21 postfix/smtpd[226]: B6BEF9A: client=shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:53 v21 postfix/cleanup[228]: B6BEF9A: message-id=<[EMAIL PROTECTED]> Nov 16 14:19:53 v21 postfix/qmgr[195]: B6BEF9A: from=<[EMAIL PROTECTED]>, size=1407, nrcpt=1 (queue active) Nov 16 14:19:53 v21 postfix/smtpd[226]: disconnect from shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:53 v21 postfix/local[230]: B6BEF9A: to=<[EMAIL PROTECTED]>, relay=local, delay=1, status=sent (maildir) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
portsdb -uU
getting this error for my portsdb -uU i just snipped part of it because it is huge almost all the ports i would say. Did a cvsup for all the ports and realized i did not have the space to spare for them so did a rm -R * in the /usr/ports dir did another cvsup just the ports i needed and now i get this horrible error my cvsup file is also included in case it has something to do with things. s/graphics/imlib" non-existent -- dependency list incomplete glimmer-1.2.1_2:"/usr/ports/x11/gnomelibs" non-existent -- dependency list incomplete glimmer-1.2.1_2:"/usr/ports/graphics/gnomecanvas" non-existent -- dependency list incomplete glimmer-1.2.1_2:"/usr/ports/print/gnomeprint" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/misc/gnomemimedata" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/misc/gnomehier" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/misc/gnomemimedata" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/x11/XFree86-4-libraries" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/audio/esound" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/x11-toolkits/pango" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/x11-toolkits/gtk20" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/x11-toolkits/gail" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/graphics/libgnomecanvas" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/graphics/libart_lgpl2" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/print/libgnomeprint" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/x11-toolkits/libgnomeprintui" non-existent -- dependency list incomplete ghex2-2.4.0.1:"/usr/ports/x11/libgnome" non-existent -- dependency list incomplete $FreeBSD: V21 /usr/local/etc/cvsup/sup-all ver 1.1 2003/11/17 rmvg #== # IMPORTANT: Change the next line to use one of the CVSup mirror sites # listed at http://www.freebsd.org/doc/handbook/mirrors.html. #cvsup1.FreeBSD.org (maintainer <[EMAIL PROTECTED]>), Washington state #cvsup7.FreeBSD.org (maintainer John Polstra <[EMAIL PROTECTED]>), Washington state #cvsup2.jp.FreeBSD.org (maintainer Masafumi NAKANE <[EMAIL PROTECTED]>) ### # # DANGER! WARNING! LOOK OUT! VORSICHT! # # If you add any of the ports or doc collections to this file, be sure to # specify them with a "tag" value set to ".", like this: # # ports-all tag=. # doc-all tag=. # # If you leave out the "tag=." portion, CVSup will delete all of # the files in your ports or doc tree. That is because the ports and doc # collections do not use the same tags as the main part of the FreeBSD # source tree. # ### #*default host=cvsup.ca.FreeBSD.org #*default host=cvsup1.FreeBSD.org #(maintainer <[EMAIL PROTECTED]>), Washington state *default host=cvsup7.FreeBSD.org #(maintainer John Polstra <[EMAIL PROTECTED]>), Washington stat #*default host=cvsup2.jp.FreeBSD.org #(maintainer Masafumi NAKANE <[EMAIL PROTECTED]>) *default prefix=/usr # The following line is for 4-stable. *default release=cvs tag=RELENG_4 *default delete use-rel-suffix #-- # sources files #-- #-- #ports files #-- #ports-all tag=. ports-base tag=. ports-archivers tag=. #ports-astro #ports-audio #ports-benchmarks #ports-biology #ports-cad #ports-chinese ports-comms tag=. ports-converters tag=. ports-databases tag=. #ports-deskutils ports-devel tag=. ports-dns tag=. ports-editors tag=. #ports-emulators #ports-finance #ports-french #ports-ftp ports-games tag=. #ports-german #ports-graphics #ports-hebrew #ports-hungarian #ports-irc #ports-japanese #ports-java #ports-korean ports-lang tag=. ports-mail tag=. #ports-math ect ect ect you get the idea please help ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
fortune
I can not get my fortune command to work even though it does when i login any ideas ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mutt maildir and enviroment variables
Ok i need some help with Mutt but not really mutt more just Freebsd in general I run freebsd 4.8 something mutt version 1.4 something postfix 2.0.0.16 bincimap version 1.2.3 when i execute the command #mutt i get an empty /var/mail/user mailbox i use Maildir and my mail box is /usr/home/user/Maildir so if i execute this command #mutt -f /usr/home/user/Maildir everything works fine and i can read my mail so how do i set mutt to read this mailbox instead of /var/mail/user i tried the .muttrc .mailrc .bashrc .chsrfile in my users home directory i tried the .cshrc .profile file in the / directory please can someone tell me where to set this variable so that i only have to do it once and it will work for all the new users i create as well please p.s. a general overview on making these type of setting and which files to make them in would be much appreciated as my system is getting messy and i cant remember all the changes i have made or to what files i have made them. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
lost mailbox
I run freebsd 4.8 and postfix 2.0.0.16 when i try to access my mail using mail version Mail version 8.1 6/6/93 i always have 0 messages even though i have sent several messages and watched them being received and sent to maildir in the mailog file Nov 16 14:07:55 v21 postfix/master[193]: daemon started -- version 2.0.16 Nov 16 14:19:52 v21 postfix/smtpd[226]: connect from shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:52 v21 postfix/smtpd[226]: B6BEF9A: client=shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:53 v21 postfix/cleanup[228]: B6BEF9A: message-id=<[EMAIL PROTECTED]> Nov 16 14:19:53 v21 postfix/qmgr[195]: B6BEF9A: from=<[EMAIL PROTECTED]>, size=1407, nrcpt=1 (queue active) Nov 16 14:19:53 v21 postfix/smtpd[226]: disconnect fromplease help shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:53 v21 postfix/local[230]: B6BEF9A: to=<[EMAIL PROTECTED]>, relay=local, delay=1, status=sent ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mailbox location problems
I run freebsd 4.8 and postfix 2.0.0.16 when i try to access my mail using mail version Mail version 8.1 6/6/93 i always have 0 messages even though i have sent several messages and watched them being received and sent to maildir in the mailog file Nov 16 14:07:55 v21 postfix/master[193]: daemon started -- version 2.0.16 Nov 16 14:19:52 v21 postfix/smtpd[226]: connect from shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:52 v21 postfix/smtpd[226]: B6BEF9A: client=shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:53 v21 postfix/cleanup[228]: B6BEF9A: message-id=<[EMAIL PROTECTED]> Nov 16 14:19:53 v21 postfix/qmgr[195]: B6BEF9A: from=<[EMAIL PROTECTED]>, size=1407, nrcpt=1 (queue active) Nov 16 14:19:53 v21 postfix/smtpd[226]: disconnect fromplease help shawidc-mo1.cg.shawcable.net[24.71.223.10] Nov 16 14:19:53 v21 postfix/local[230]: B6BEF9A: to=<[EMAIL PROTECTED]>, relay=local, delay=1, status=sent (maildir) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
postfix problems
i keep geting this error in my postfix logs have tried newaliases command and it does not help also have tried to forward roots mail to a different accout and it does not seem to be working can someone help with this postfix/local[617]: warning: database /etc/mail/aliases.db is older than source file /etc/mail/aliases ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
vgetty
right on glad to hear someone has this program working as i am sort of lost mgetty starts ok i think as i get this in my ps -aux root 487 0.0 1.2 1048 704 ?? S 2:34PM 0:00.03 /usr/local/sbin/mgetty cuaa1 root0 0.0 0.0 00 ?? DLs 7:58AM 0:00.00 (swapper) [Sun Aug 31] 02:34 PM [0] but i want to use vgetty and all the docs talk about /etc/inittab i do not think this file exists in freebsd so where do i make my changes so that vgetty starts instead of mgetty also my log file for mgetty.cuaa1 has some problems with my modem mabey you can help me with that too. i use freebsd 4.8 and a usr 3com pci modem this is what bsd sees for a dmseg sio0: <3COM PCI FaxModem> port 0x6c00-0x6c07 irq 9 at device 15.0 on pci0 sio0: moving to sio4 sio4: type 16550A this is my mgetty log mabey i should turn up my debug settings however i really hate to reboot my system Is there a way to reset mgetty vgetty without rebooting as my isp changes ipaddress alot which causes my lots of dns greif and missed emails and web hit etc etc etc 08/31 15:09:19 aa1 mgetty: experimental test release 1.1.30-Dec16 08/31 15:09:19 aa1 check for lockfiles 08/31 15:09:19 aa1 locking the line 08/31 15:09:22 aa1 WARNING: DSR is off - modem turned off or bad cable? 08/31 15:09:22 aa1 lowering DTR to reset Modem 08/31 15:09:23 aa1 send: ATS0=0Q0&D3&C1[0d] 08/31 15:09:23 aa1 waiting for ``OK'' 08/31 15:09:43 aa1 timeout in chat script, waiting for `OK' 08/31 15:09:43 aa1 init chat timed out, trying force-init-chat 08/31 15:09:43 aa1 send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d] 08/31 15:09:47 aa1 waiting for ``OK'' 08/31 15:10:07 aa1 timeout in chat script, waiting for `OK' 08/31 15:10:07 aa1 init chat failed, exiting...: Interrupted system call 08/31 15:10:07 # failed in mg_init_data, dev=cuaa1, pid=572 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
vgetty
need help with vgetty anyone use this program ?? could really use some help with getting it going. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: cvsup server down???
Kris Kennaway wrote: aready tried three mirrors On Tue, Aug 19, 2003 at 08:10:46PM -0600, RYAN vAN GINNEKEN wrote: having trouble with cvsup keeps refuseing to let me log in Try another mirror. Kris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
cvsup server down???
having trouble with cvsup keeps refuseing to let me log in ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
server type
can i run free bsd on a Sun Sparc Server 1000 or what type of server do i have to purchase i do not want a i386 platform but unfortunalty that is all i know about. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ps and top
how do i check to see if my sources are in sync ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ps and top
so what should i do hopefully not a make world or anything that will cause me to reboot as i do not want to loss my ip address. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
top and ps are messed up
i run freebsd 4.8 my top and ps look all funny hear it might have something to do with an out of sync kernel help PID USERNAME PRI NICE SIZERES STATETIME WCPUCPU COMMAND -971117472 rmvg 89 -52 2000K 1032K ? 42 0:00 0.00% 0.00% <> 0 root 100 -52 576K 356K ? 13 0:00 0.00% 0.00% <> 0 rmvg 75 -52 1080K 884K ? 41 0:00 1164823035.96% 162432514 0 root 95 -52 808K 152K ? 18 0:00 0.00% 162406742.19% <> -982645696 tech 83 -52 3432K 1508K ? -66 0:00 208943868.99% 16240 -982652352 root 75 -52 1088K 0K ? 52 0:00 162297314.06% 16229 0 root 82 -52 632K 0K ?8 0:00 162297070.31% 162297070. 0 root 75 -52 1080K 0K ? 34 0:00 162296989.06% 162296989. 0 root 95 -52 808K 0K ? 12 0:00 162296867.19% 162296867. 0 root 82 -52 624K 0K ?9 0:00 162296826.56% 162296826. 0 rmvg 75 -52 1080K 0K ? 33 0:00 162296745.31% 162296745. 0 rmvg 75 -52 1080K 0K ? 51 0:00 162296725.00% 162296725. 0 root 82 -52 624K 0K ? 11 0:00 162296643.75% 162296643. 0 root 82 -52 624K 0K ? 10 0:00 162296603.12% 162296603. 0 root 78 -52 212K 0K ? 21 0:00 162206629.69% 162206629. 0 root 79 -52 864K88K ? -69 0:00 162205557.81% 162205557. 0 root 95 -52 884K 148K ? -55 0:00 162205542.19% 162205542. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
test
Just a test I have been having a bit of trouble posting to this list. Please accept my apologies for sending a test message to the list. This list is an invaluable resource for me and i do not want to cause any inconvenience to any of the users or hosts or anyone for that matter thank you and sorry for any possible inconvenience ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
firewall
ipfw /etc/rc.fw4 gives me ipfw: bad arguments, for usage summary ``ipfw'' need to start my firewall without rebooting ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
getting old mail from root
anyone know how to send the mail in root's Maildir to another user i have forwarded the the root address already but need the mail that is already sitting in that account. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RESET FIREWALL WITHOUT REBOOT
hello group I need to know how to stop and start my firewall rules without resetting my computer as I am on ADSL and have a dynamic ip that I do not want to change. seems to change mostly when I reboot mostly. so here is the dilemma I run bind apache bincimap postfix and a few others it is my only server right now and it cant go down because if I do not get my clients emails I go bankrupt. I what to set up a firewall and have compiled the necessary items into the kernel did this when I first set up my system many reboots ago options IPFIREWALL options IPFIREWALL_VERBOSE options IPDIVERT I have created a file called rc.fw4 and I have set my rc.conf #ipv4 firewall firewall_enable="YES" firewall_type="/etc/rc.fw4" firewall_script="/etc/rc.firewall" firewall_quiet="NO" IS THERE A WAY ACTIVATE ALL THIS WITHOUT A REBOOT ALSO IS THERE A WAY DE-ACTIVATE ALL THIS WITHOUT A REBOOT IN CASE SOMETHING GOES WRONG WHICH USUALLY DOES WITH MY FIREWALL RULES www.computerking.ca QUALITY and SERVICE first. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
[no subject]
www.computerking.ca QUALITY and SERVICE first. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
