Re: FreeBSD 6.1 setup doesn't see my HDD
On Mon, Nov 27, 2006 at 07:48:44PM +0200, Dima wrote: Well, this is something I have not seen, so I hope someone else can weigh in on it. jerry On Mon, Nov 27, 2006 at 06:58:32PM +0200, Dima wrote: Hmmm. I am presuming you are booted from an install CD. Yes, I'm booting from install CD. By the way there are some error messages regarding this on Ctrl+Alt+F2 (during install), but they say nothing to me: ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR error=84ICRC,ABORTED LBA=0 They're repeated 4 times. Hmmm. I don't remember seeing anything like those when I had the afore-mentioned problem. That looks like something is connected wrong or being addressed wrong. It isn't a geometry issue, I don't think. But Red Hat 9 still works fine on that hardware. What can be wrong? My HDD is Master on first IDE-channel, CD-ROM - Secondary on the same channel. Can you find the dmesg information for both the disk and the CD reader during the boot? Are they producing device identifiers and specs that look correct? Those lines will start with 'adnn:' and 'acdnn:' where nn is a number, probably '0' (you hope). Yes, I can: ad0: 238457 MB WDC WD2500JB-00GVC0 08.02D08 at ata0-master UDMA acd0 . at ata0-slave looks fine too (I'm too lazy to copy it :) Also I have ad2 and it seems fine on dmesg too. After that goes ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR and repeats 3 times. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD 6.1 setup doesn't see my HDD
Hi all. I have Red Hat Linux 9 running on my server with HDD Western Digital WD2500JB (250 GB IDE). I'd like to move to FreeBSD 6.1. During install from CD setup doesn't recognize geometry of my HDD (it says 484521/16/63 is wrong geometry and switches it to 30401/255/63, but after that still can't write anything). Red Hat works with geometry 30401/255/63. Also I've tried to enter data from BIOS - it doesn't help too. On HDD's manufacturer site I've read, that recommended geometry is cyls 16383, secs 63; total sector count - 488 397 168. Can someone help me to solve this problem? Thank you. Dmitriy. __ Отправлено http://webmail.meta.ua/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 6.1 setup doesn't see my HDD
On Mon, Nov 27, 2006 at 01:10:16PM +0200, Dima wrote: Hi all. I have Red Hat Linux 9 running on my server with HDD Western Digital WD2500JB (250 GB IDE). I'd like to move to FreeBSD 6.1. During install from CD setup doesn't recognize geometry of my HDD (it says 484521/16/63 is wrong geometry and switches it to 30401/255/63, but after that still can't write anything). Red Hat works with geometry 30401/255/63. Also I've tried to enter data from BIOS - it doesn't help too. On HDD's manufacturer site I've read, that recommended geometry is cyls 16383, secs 63; total sector count - 488 397 168. Can someone help me to solve this problem? Usually, with FreeBSD, you just ignore those geometry messages. This should be especially true if you plan to use the whole disk for FreeBSD.The geometry that is reported is virtual and does not really mean anything for you.Don't try to do anything to the BIOS settings for it either.Just take the [fdisk] option that says to create one large slice comprising the whole disk for FreeBSD and it should overwrite everything nicely. If this doesn't work then it will be necessary to know more about just what kind of disk you are trying to use. jerry Thank you. Dmitriy. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 6.1 setup doesn't see my HDD
On Mon, Nov 27, 2006 at 01:10:16PM +0200, Dima wrote: Usually, with FreeBSD, you just ignore those geometry messages. This should be especially true if you plan to use the whole disk for FreeBSD.The geometry that is reported is virtual and does not really mean anything for you.Don't try to do anything to the BIOS settings for it either.Just take the [fdisk] option that says to create one large slice comprising the whole disk for FreeBSD and it should overwrite everything nicely. If this doesn't work then it will be necessary to know more about just what kind of disk you are trying to use. I've tried to create one large slice too. All goes fine until Commit. When install tries to write on disk it shows: ERROR: Unable to write data to disk ad0! By the way there are some error messages regarding this on Ctrl+Alt+F2 (during install), but they say nothing to me: ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR error=84ICRC,ABORTED LBA=0 They're repeated 4 times. My HDD is Master on first IDE-channel, CD-ROM - Secondary on the same channel. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 6.1 setup doesn't see my HDD
On Mon, Nov 27, 2006 at 06:58:32PM +0200, Dima wrote: On Mon, Nov 27, 2006 at 01:10:16PM +0200, Dima wrote: Usually, with FreeBSD, you just ignore those geometry messages. This should be especially true if you plan to use the whole disk for FreeBSD.The geometry that is reported is virtual and does not really mean anything for you.Don't try to do anything to the BIOS settings for it either.Just take the [fdisk] option that says to create one large slice comprising the whole disk for FreeBSD and it should overwrite everything nicely. If this doesn't work then it will be necessary to know more about just what kind of disk you are trying to use. I've tried to create one large slice too. All goes fine until Commit. When install tries to write on disk it shows: ERROR: Unable to write data to disk ad0! Hmmm. I am presuming you are booted from an install CD. The times I have seen this message are when I tried to fdisk a drive that had stuff currently mounted and/or was the disk I was booted to. By the way there are some error messages regarding this on Ctrl+Alt+F2 (during install), but they say nothing to me: ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR error=84ICRC,ABORTED LBA=0 They're repeated 4 times. Hmmm. I don't remember seeing anything like those when I had the afore-mentioned problem. That looks like something is connected wrong or being addressed wrong. It isn't a geometry issue, I don't think. My HDD is Master on first IDE-channel, CD-ROM - Secondary on the same channel. Can you find the dmesg information for both the disk and the CD reader during the boot? Are they producing device identifiers and specs that look correct? Those lines will start with 'adnn:' and 'acdnn:' where nn is a number, probably '0' (you hope). jerry ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 6.1 setup doesn't see my HDD
On Mon, Nov 27, 2006 at 06:58:32PM +0200, Dima wrote: Hmmm. I am presuming you are booted from an install CD. Yes, I'm booting from install CD. By the way there are some error messages regarding this on Ctrl+Alt+F2 (during install), but they say nothing to me: ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR error=84ICRC,ABORTED LBA=0 They're repeated 4 times. Hmmm. I don't remember seeing anything like those when I had the afore-mentioned problem. That looks like something is connected wrong or being addressed wrong. It isn't a geometry issue, I don't think. But Red Hat 9 still works fine on that hardware. What can be wrong? My HDD is Master on first IDE-channel, CD-ROM - Secondary on the same channel. Can you find the dmesg information for both the disk and the CD reader during the boot? Are they producing device identifiers and specs that look correct? Those lines will start with 'adnn:' and 'acdnn:' where nn is a number, probably '0' (you hope). Yes, I can: ad0: 238457 MB WDC WD2500JB-00GVC0 08.02D08 at ata0-master UDMA acd0 . at ata0-slave looks fine too (I'm too lazy to copy it :) Also I have ad2 and it seems fine on dmesg too. After that goes ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR and repeats 3 times. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 6.1 setup doesn't see my HDD
On Monday 27 November 2006 23:18, Dima wrote: On Mon, Nov 27, 2006 at 06:58:32PM +0200, Dima wrote: trimmed By the way there are some error messages regarding this on Ctrl+Alt+F2 (during install), but they say nothing to me: ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR error=84ICRC,ABORTED LBA=0 They're repeated 4 times. trimmed Yes, I can: ad0: 238457 MB WDC WD2500JB-00GVC0 08.02D08 at ata0-master UDMA acd0 . at ata0-slave looks fine too (I'm too lazy to copy it :) Also I have ad2 and it seems fine on dmesg too. After that goes ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR and repeats 3 times. Well..I installed the FreeBSD 6.1-STABLE release lately, and everything went fine as far as the install was concerned. Yeah, I had some problems getting KDE to work properly, cuz of some issues with the Xserver, but they could be dealt with. So for a couple of days, I must say that FreeBSD was working fine. Then I was looking for some way of mounting the FreeBSD partition on Linux and/or vice-versa. But I couldn't do it. The next time I tried booting to FreeBSD, I am getting the same errors that you are!!! This time, I have no clue to what went wrong! Is this a known bug or something? -- Regards, Amit. http://copperskullcprogramming.blogspot.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
