Re: WinXP 802.1X/Radius/eDir (LDAP)
Matt McFarlane wrote: Totally new to radius. I've installed freeradius 1.02 --with-edir on Suse 9. Attempting to use 802.1X auth from wireless user behind HP 420 AP using WinXP to an eDir tree via LDAP. When I use radtest the bind is successful. However when using the 802.1X supplicant I get the output below. Two things I've noticed are that the password appears to not be received (via PEAP) and that the bind password is being sent as "aassword" instead of "password" no matter what I enter on the supplicant. You can't use PEAP unless you have plaintext passwords stored in the LDAP or NT/LM password hashes. To use LDAP bind to authenticate you will need to use TTLS with PAP as inner tunnel authentication. This is how you can configure your clients to use TTLS+PAP http://vuksan.com/linux/dot1x/wpa-client-config.html Here is my set up with OpenLDAP that supports both TTLS/PEAP. http://vuksan.com/linux/dot1x/802-1x-LDAP.html Vladimir modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for testuser radius_xlat: '(cn=testuser)' radius_xlat: 'ou=cs,ou=srvc,o=wheaton' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to nw_radius.wheaton.edu:389, authentication 0 rlm_ldap: setting TLS CACert File to /etc/raddb/certs/wheatonCA/radtree.b64 rlm_ldap: setting TLS Require Cert to demand rlm_ldap: starting TLS rlm_ldap: bind as cn=admin,ou=cs,ou=srvc,o=wheaton/password to nw_radius.wheaton.edu:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=cs,ou=srvc,o=wheaton, with filter (cn=testuser) rlm_ldap: checking if remote access for testuser is allowed by uid rlm_ldap: Added the eDirectory password in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "test-ldap" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type LDAP auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 0 rlm_ldap: - authenticate rlm_ldap: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "test-ldap" returns invalid for request 0 modcall: group Auth-Type returns invalid for request 0 auth: Failed to validate the user. Login incorrect: [testuser/] (from client shopwap port 1 cli 000d88ac90c6) Processing the post-auth section of radiusd.conf modcall: entering group Post-Auth-Type for request 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to nw_radius.wheaton.edu:389, authentication 0 rlm_ldap: setting TLS CACert File to /etc/raddb/certs/wheatonCA/radtree.b64 rlm_ldap: setting TLS Require Cert to demand rlm_ldap: starting TLS rlm_ldap: bind as cn=testuser,ou=cs,ou=srvc,o=wheaton/aassword to nw_radius.wheaton.edu:389 rlm_ldap: waiting for bind result ... rlm_ldap: LDAP login failed: check identity, password settings in ldap section of radiusd.conf rlm_ldap: eDirectory account policy check failed. rlm_ldap: NDS error: failed authentication (-669) rlm_ldap: ldap_release_conn: Release Id: 0 modcall[post-auth]: module "test-ldap" returns reject for request 0 modcall: group Post-Auth-Type returns reject for request 0 Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 172.24.41.241:2460, id=31, length=130 Sending Access-Reject of id 31 to 172.24.41.241:2460 Reply-Message = "NDS error: failed authentication (-669)" --- Walking the entire request list --- Waking up in 3 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 31 with timestamp 428b9927 Nothing to do. Sleeping until we see a request. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: WinXP 802.1X/Radius/eDir (LDAP)
Hi,
FreeRADIUS is trying to do LDAP authentication and not PEAP
authentication. This is probably because you have not configured the
peap module. Please read eap.conf on how to configure the peap module.
Rest of the comments inline.
On Wed, 2005-05-18 at 16:49 -0500, Matt McFarlane wrote:
> Totally new to radius. I've installed freeradius 1.02 --with-edir on Suse 9.
> Attempting to use 802.1X auth from wireless user behind HP 420 AP using
> WinXP to an eDir tree via LDAP. When I use radtest the bind is successful.
> However when using the 802.1X supplicant I get the output below. Two things
> I've noticed are that the password appears to not be received (via PEAP) and
> that the bind password is being sent as "aassword" instead of "password" no
> matter what I enter on the supplicant.
>
>
>
> ldap: base_filter = "(objectclass=radiusprofile)"
> ldap: default_profile = "(null)"
> ldap: profile_attribute = "(null)"
> ldap: password_header = "(null)"
> ldap: password_attribute = "nspmPassword"
> ldap: access_attr = "uid"
> ldap: groupname_attribute = "cn"
> ldap: groupmembership_filter =
> "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
> ldap: groupmembership_attribute = "(null)"
> ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap"
> ldap: ldap_debug = 0
> ldap: ldap_connections_number = 5
> ldap: compare_check_items = no
> ldap: access_attr_used_for_allow = yes
> ldap: do_xlat = yes
> ldap: edir_account_policy_check = yes
> rlm_ldap: Registering ldap_groupcmp for Ldap-Group
> rlm_ldap: Creating new attribute test-ldap-Ldap-Group
> rlm_ldap: Registering ldap_groupcmp for test-ldap-Ldap-Group
> rlm_ldap: Registering ldap_xlat with xlat_name test-ldap
> rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
> rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
> rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
> rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
> rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
> rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
> rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
> rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
> rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
> rlm_ldap: LDAP nspmPassword mapped to RADIUS User-Password
> rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
> rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
> rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
> rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
> rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
> rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
> rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
> rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
> rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
> rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
> rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
> rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
> rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
> rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
> rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
> rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
> rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
> rlm_ldap: LDAP radiusClass mapped to RADIUS Class
> rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
> rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
> rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
> rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
> rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
> rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
> rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
> Framed-AppleTalk-Link
> rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
> Framed-AppleTalk-Network
> rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
> Framed-AppleTalk-Zone
> rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
> rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
> conns: 0x8151848
> Module: Instantiated ldap (test-ldap)
> Module: Loaded preprocess
> preprocess: huntgroups = "/etc/raddb/huntgroups"
> preprocess: hints = "/etc/raddb/hints"
> preprocess: with_ascend_hack = no
> preprocess: ascend_channels_per_line = 23
> preprocess: with_ntdomain_hack = no
> preprocess: with_specialix_jetstream_hack = no
> preprocess: with_cisco_vsa_hack = no
> Module: Instantiated preprocess (preprocess)
> Module: Loaded files
> files: usersfile = "/etc/raddb/users"
> files: acctusersfile = "/etc/ra
Re: WinXP 802.1X/Radius/eDir (LDAP)
"Matt McFarlane" <[EMAIL PROTECTED]> wrote: > Two things I've noticed are that the password appears to not be > received (via PEAP) That's how PEAP works. > and that the bind password is being sent as "aassword" instead of > "password" no matter what I enter on the supplicant. The "aassword" is what you entered into radiusd.conf, as the ldap "password" item. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
WinXP 802.1X/Radius/eDir (LDAP)
Totally new to radius. I've installed freeradius 1.02 --with-edir on Suse 9.
Attempting to use 802.1X auth from wireless user behind HP 420 AP using WinXP
to an eDir tree via LDAP. When I use radtest the bind is successful. However
when using the 802.1X supplicant I get the output below. Two things I've
noticed are that the password appears to not be received (via PEAP) and that
the bind password is being sent as "aassword" instead of "password" no matter
what I enter on the supplicant.
ldap: base_filter = "(objectclass=radiusprofile)"
ldap: default_profile = "(null)"
ldap: profile_attribute = "(null)"
ldap: password_header = "(null)"
ldap: password_attribute = "nspmPassword"
ldap: access_attr = "uid"
ldap: groupname_attribute = "cn"
ldap: groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
ldap: groupmembership_attribute = "(null)"
ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap: ldap_debug = 0
ldap: ldap_connections_number = 5
ldap: compare_check_items = no
ldap: access_attr_used_for_allow = yes
ldap: do_xlat = yes
ldap: edir_account_policy_check = yes
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Creating new attribute test-ldap-Ldap-Group
rlm_ldap: Registering ldap_groupcmp for test-ldap-Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name test-ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP nspmPassword mapped to RADIUS User-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
conns: 0x8151848
Module: Instantiated ldap (test-ldap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detai
