[gentoo-user] Update After A Year
Hi, I moved from my flat a year ago, and now I' went back. At my temporary place I wasn't be able to reach the internet, so I didn't update the system. Now I'd like to update it. Should I do anything special in addition to an emerge -e system; emerge -e world? Are there anything I should attend to? TIA, Tamas Sarga
Re: [gentoo-user] cdk: BUILD ERROR
Keith Kastorff wrote: On Tue, 2006-08-08 at 10:37 +0200, Meino Christian Cramer wrote: I tried this before...it does not help. gcc 3.4.4 is still referenced by the cdk build process (or what else...) Try emerge --oneshot libtool. Hi, I'm not the opener, but I had the same problem with gcc 3.4.5 to 3.4.6, and emerge --oneshot libtool fixed it. BTW I did this gcc upgrade in June. So why it is a problem now? I rebooted some times since then. Everything should inherit the new version number, or not? Why this problem occurs after 2 months the gcc upgrade? It isn't offense, I simply don't understand it. TIA Tamas Sarga -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xfce config
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jeremy Olexa wrote: Tamas Sarga wrote: Hi, Where xfce stores the user settings? One of my users can use xfce without any problems, but the other... When any application starts, xfwm segfaults. I deleted ~/.config/xfce4, but this doesn't help. What can I do? TIA. Tamas Sarga Sounds weird that configs would cause a segfault, but check here: /etc/xdg/xfce4/ You could also use this to help you: find / | grep -i xfce (as root) which is what I did to find the above. HTH -- Jeremy Olexa ([EMAIL PROTECTED]) Office: EE/CS 1-201 CS/IT Systems Staff University of Minnesota Thanks for the tip. I found ~/.cache with slocate. It is really weird, but it solved the problem. I can login into xfce and use it w/o segfault. Unfortunately I forgot to save ~/.cache before deleted it, so I can not reproduce the error. But I have one problem. Taskbar isn't started by startxfce4, and I can't figure out how can I start it with hand. In settings I changed top position to bottom and back without any success. How can I start taskbar by hand? TIA. Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEpEkA2hT1i1vMtiURAr/WAKCO53aItXMDD9dvCtJpRtGWDVOAzQCghNgU ehL4z5+cf066oQY5XomdKEI= =oUfi -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] etc-update
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Daevid Vincent wrote: I use Meld as well. It's outstanding. But like you, I want to use a 'console' diff program for my remote servers (that don't have X installed). I've looked for a HOWTO or quick tutorial on vimdiff and couldn't find one. Got any pointers? I know very very little 'vi' enough to insert/delete/save basically. DÆVID Hi, Give a shot to vimtutor. HTH. Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEpEo62hT1i1vMtiURAuv7AJ9InQ3N5qhdQsZ30rRwPkvykBcLjgCglINU 4DK5NLdjbtJV8/le5H3IJUw= =LSnX -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] test feature in portage
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Michael Weyershäuser wrote: Tamas Sarga wrote: Hi, I set test feature in portage, but I don't know what can I win. I lost some minutes when compiled glibc, but what is the pro of this feature. I've got never any problem with successful compiles. So am I need test feature? What are your opinions? What can this protect a user from? Some packages (like glibc) bring along an automated test suite that can be run after compilation to see if the program works correctly. If FEATURES=test is set then an available test suite is being run, if it is not set it is being skipped. As a normal end user on a desktop this might be considered a waste of time, when testing programs on a new architecture this can be helpful and should be enabled... Thanks! Should I report to b.g.o if it failed on the first package after I fall asleep :) ? It was kdebase-3.5.2-r2. Anyway now I turned it off. Cheers, Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEnlI62hT1i1vMtiURAhLkAJ4xkdkEyuK64/eXmY5nAVoSCe0fVwCgknKn mNnbE0s6mlGoFNBxZozlwLQ= =v7Up -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] For the benefit of John Laremore
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Teresa and Dale wrote: Richard Fish wrote: On 5/30/06, Teresa and Dale [EMAIL PROTECTED] wrote: I was wondering about that. I have noticed that others do that sometimes too. That made me wonder about his too. I'm a gmail user, even though my address isn't a @gmail.com. I would definitely appreciate it if you let me know if you see this from any of my postings. BTW, I only see one of Daniel's email, even though it clearly shows up 5 times in the archives. Maybe gmail is filtering their own mistakes? -Richard Someone was explaining this a while back but it went over my head completely. It happens a lot and some email programs, since they have the same ID thing, will filter them out. Anybody else know why they do this that can explain it for us little minons? Dale :-) Hi, In addition gmail filters out my sent mails from inbox. So if I send a mail to a ml, a don't get it. At least across pop3. Cheers, Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEnleG2hT1i1vMtiURAvl4AJ9+9ljtXzKJBa3Bpl3wbbvP5mY1uQCfcfUx HECC2RfIWAhnUSup0kWubyk= =6jxd -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] xfce config
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, Where xfce stores the user settings? One of my users can use xfce without any problems, but the other... When any application starts, xfwm segfaults. I deleted ~/.config/xfce4, but this doesn't help. What can I do? TIA. Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEnos12hT1i1vMtiURAsP/AKCE+3WDLG5SpLFtG6h1uiAtKYwbbACePtM7 0Dnk8/nW9Svo+uXZgABGQtc= =YG7G -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] test feature in portage
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I set test feature in portage, but I don't know what can I win. I lost some minutes when compiled glibc, but what is the pro of this feature. I've got never any problem with successful compiles. So am I need test feature? What are your opinions? What can this protect a user from? - -- TIA Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEnbJl2hT1i1vMtiURAn77AJ9ZwzGu4pJ/p2gvP79spVf1pnTa7ACgnMgL 2NerD7ZJW7Oo0Zn9PW6VIYs= =8fGq -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] trouble running X clients as root
Robert Persson wrote: I am trying to run gdmsetup and getting can't find display type errors. Here is what happened when I try to run it from an xterm: [EMAIL PROTECTED] ~ $ sux Password: zebedee robert # gdmsetup (gdmsetup:6618): GnomeUI-WARNING **: While connecting to session manager: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed. Could not access GDM configuration file. zebedee robert # exit exit [EMAIL PROTECTED] ~ $ sudo gdmsetup Password: (gdmsetup:6828): Gtk-WARNING **: cannot open display: I then tried, as a test, to open a root xterm using sux and I got the following error: sux Password: zebedee robert # xterm Warning: Tried to connect to session manager, Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed However the root xterm opened up anyway. It failed when I tried to sudo an xterm: sudo xterm Warning: This program is an suid-root program or is being run by the root user. The full text of the error or warning message cannot be safely formatted in this environment. You may get a more descriptive message by running the program as a non-root user or by removing the suid bit on the executable. xterm Xt error: Can't open display: %s xterm: DISPLAY is not set However DISPLAY +is+ set. When I echo $DISPLAY, sudo echo $DISPLAY or sux and then echo $DISPLAY I get the same answer-- :0.0 This has got me quite confused. I used not to get these messages when I ran X clients as root. Anyone know what is going on here? Thanks in advance Robert Hi, I tried to reproduce it, but can't. But I dicovered, that `sux` and `sux -` is not the same. The help doesn't say anything about - parameter, but if I give `env` after `sux` and `sux -` then I found some differences. Maybe `sux -` worth a try for you. BTW I can start xterm without any error or warning with or without -. In /etc/X11 I don't find any approrpiate setting. Maybe you could try it under TWM. TIA. Cheers, Tamas Sarga -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] nvidia-kernel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, It contains =media-video/nvidia-kernel-1.0.8756 ~x86 =media-video/nvidia-glx-1.0.8756 ~x86 now. It contained the 8178-r3 version, because I needed it for some purpose, but I don't want to upgrade at every testing ebuild. I just wanted that ebuild, wait for stabilizing, and follow the stabil version further. TIA. Tamas Sarga Richard Fish wrote: What did it? In /etc/portage/ just one file, the package.keywords contains nvidia-kernel. What exactly does /etc/portage/package.keywords contain? It should be: media-video/nvidia-kernel ~x86 -Richard -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEO//G2hT1i1vMtiURAmZqAJ0f9513yEIE4PwE1tNCAofWl+YRrgCfS1GE mvqgh6U60cUB/ytQp02aPBU= =96S7 -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] nvidia-kernel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Boyd Stephen Smith Jr. wrote: On Monday 10 April 2006 16:48, Tamas Sarga [EMAIL PROTECTED] wrote about 'Re: [gentoo-user] nvidia-kernel': My /etc/make.profile links to ../usr/portage/profiles/default-linux/x86/2005.0/. That's a little bit old but not deprecated. You might try upgrading, but I really don't think that's your issue. Hi, I relink make.profile, did an emerge --metapackage eupdatedb, but nothing change. Did I miss anything with profile update? TIA. Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEPAgq2hT1i1vMtiURAv5SAJ4kYSRDsF/nG/zyu88wjwxYyUtY3QCfUq1g d0ickUpWeoObx26ryF0uHes= =smpN -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] everything is showed hard-masked with equery[was nvidia-kernel]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I started a new thread, because my problem got a new aspect. My original problem was that testing (~) nvidia-kernel packages were showed as hardmasked (M~) in equery. Now I realized, that all testing ebuilds is showed as hardmasked. I did a try with baselayout, because I know, that I've never masked, or unmasked it. I looked at packages.gentoo.org, 1.12.0_pre17-r1 is testing. #emerge -pv baselayout Emerge wants to reemerge my 1.11.14-r7. It is good. #ACCEPTED_KEYWORD=~x86 emerge -pv baselayout Emerge wants to update to 1.12.0_pre17-r1. It is good. Just equery shows M~. I tried gentoolkit-0.2.1 and gentoolkit-0.2.2_pre3. I looked baselayout-vserver, because it has hardmasked version according to packages.gentoo.org. Emerge handles it well, equery shows the same M~ as for any testing package. What can be the problem? TIA. Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEPBzo2hT1i1vMtiURAsJYAJ4mZK2SjmxpUQDUsN+j7XHsMKPa3ACgnY9y JUK5LcqEcmd+BMvJcIqdovc= =EB2X -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] nvidia-kernel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Manuel McLure wrote: Tamas Sarga wrote: So yes, the ebuild is there, but #equery l -p nvidia-kernel [ Searching for package 'nvidia-kernel' in all categories among: ] * installed packages [I--] [M ] media-video/nvidia-kernel-1.0.8178-r3 (0) * Portage tree (/usr/portage) [-P-] [ -] media-video/nvidia-kernel-1.0.6111-r3 (0) [-P-] [ -] media-video/nvidia-kernel-1.0.6629-r5 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7167-r1 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7174-r2 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7667 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7676-r1 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.8174-r1 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.8756 (0) Something's strange with your portage tree. I just did the same after a sync: $ equery l -p nvidia-kernel [ Searching for package 'nvidia-kernel' in all categories among: ] * installed packages [I--] [ ~] media-video/nvidia-kernel-1.0.8756 (0) * Portage tree (/usr/portage) [-P-] [ -] media-video/nvidia-kernel-1.0.6111-r3 (0) [-P-] [ -] media-video/nvidia-kernel-1.0.6629-r5 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.7167-r1 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.7174-r2 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.7667 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.7676-r1 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.8174-r1 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.8178-r3 (0) Are you sure you don't have anything in /etc/portage/package.mask that may be blocking? Also, try emerge --metadata to rebuild the portage cache. Hi, I did emerge --metadata and eupdatedb, but nothing has changed. My package.mask is empty. I can't understand why it is masked on my machine. I'm on x86 and I looked at packages.gentoo.org, it isn't masked there. My /etc/make.profile links to ../usr/portage/profiles/default-linux/x86/2005.0/. What did it? In /etc/portage/ just one file, the package.keywords contains nvidia-kernel. TIA. Tamas Sarga -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEOtKm2hT1i1vMtiURAjJXAJ98eNpMB1voFH4x6TY48Uk4PmOJ1gCdFhf+ SpXJsnFsTS/w+3xaeHmCnxg= =0kvK -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] nvidia-kernel
JimD wrote: On Wed, April 5, 2006 6:00 pm, Tamas Sarga wrote: Hi, I had nvidia-kernel-8178-r3 and nvidia-glx-8178. Now the latest nvidia-kernel is 8174-r1 with ~x86 keyword. Do anybody knows where nvidia-kernel-8178-r3 disappeared, and why. It is simply disappeared from the repository, I don't find it in /usr/portage/profiles/package.mask. TIA. Tamas Sarga I just did a sync 1 minute ago and here is what I got: total 122K drwxr-xr-x3 portage portage 544 Mar 24 17:06 ./ drwxr-xr-x 170 portage portage 4.5K Apr 5 19:07 ../ -rw-r--r--1 portage portage 35K Mar 24 17:06 ChangeLog -rw-r--r--1 portage portage 21K Mar 24 17:06 Manifest drwxr-xr-x 10 portage portage 648 Apr 5 19:07 files/ -rw-r--r--1 portage portage 313 Apr 25 2005 metadata.xml -rw-r--r--1 portage portage 4.5K Oct 28 03:35 nvidia-kernel-1.0.6111-r3.ebuild -rw-r--r--1 portage portage 4.7K Jan 10 14:59 nvidia-kernel-1.0.6629-r5.ebuild -rw-r--r--1 portage portage 3.9K Oct 28 03:35 nvidia-kernel-1.0.7167-r1.ebuild -rw-r--r--1 portage portage 4.2K Jan 24 10:03 nvidia-kernel-1.0.7174-r2.ebuild -rw-r--r--1 portage portage 4.5K Oct 28 03:35 nvidia-kernel-1.0.7667.ebuild -rw-r--r--1 portage portage 4.6K Oct 28 03:19 nvidia-kernel-1.0.7676-r1.ebuild -rw-r--r--1 portage portage 3.5K Dec 7 16:32 nvidia-kernel-1.0.8174-r1.ebuild -rw-r--r--1 portage portage 3.6K Mar 24 15:36 nvidia-kernel-1.0.8178-r3.ebuild Maybe try to sync again? Jim Hi, I synced just now. # ls /usr/portage/media-video/nvidia-kernel/ -rw-r--r-- 1 root root 35048 Apr 8 06:09 ChangeLog -rw-r--r-- 1 root root 5901 Apr 8 06:09 Manifest drwxr-xr-x 10 root root 4096 Apr 9 12:37 files -rw-r--r-- 1 root root 313 Apr 25 2005 metadata.xml -rw-r--r-- 1 root root 4523 Oct 28 09:35 nvidia-kernel-1.0.6111-r3.ebuild -rw-r--r-- 1 root root 4772 Jan 10 20:59 nvidia-kernel-1.0.6629-r5.ebuild -rw-r--r-- 1 root root 3982 Oct 28 09:35 nvidia-kernel-1.0.7167-r1.ebuild -rw-r--r-- 1 root root 4277 Jan 24 16:03 nvidia-kernel-1.0.7174-r2.ebuild -rw-r--r-- 1 root root 4538 Oct 28 09:35 nvidia-kernel-1.0.7667.ebuild -rw-r--r-- 1 root root 4669 Oct 28 09:19 nvidia-kernel-1.0.7676-r1.ebuild -rw-r--r-- 1 root root 3584 Dec 7 22:32 nvidia-kernel-1.0.8174-r1.ebuild -rw-r--r-- 1 root root 3585 Mar 24 21:36 nvidia-kernel-1.0.8178-r3.ebuild -rw-r--r-- 1 root root 3540 Apr 8 05:45 nvidia-kernel-1.0.8756.ebuild So yes, the ebuild is there, but #equery l -p nvidia-kernel [ Searching for package 'nvidia-kernel' in all categories among: ] * installed packages [I--] [M ] media-video/nvidia-kernel-1.0.8178-r3 (0) * Portage tree (/usr/portage) [-P-] [ -] media-video/nvidia-kernel-1.0.6111-r3 (0) [-P-] [ -] media-video/nvidia-kernel-1.0.6629-r5 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7167-r1 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7174-r2 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7667 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.7676-r1 (0) [-P-] [M~] media-video/nvidia-kernel-1.0.8174-r1 (0) [-P-] [ ~] media-video/nvidia-kernel-1.0.8756 (0) So I must move somewhere. Portage suggested downgrade, because I keyworded nvidia-kernel by version. Anyway, I keyworded 1.0.8756. I will see what will happen. But I don't see the reasons, why emerge doesn't see 1.0.8178-r3. 2 minutes later: Sorry, I realized just now, that it is hardmasked. So the question has changed. How can I figure out why it was hardmasked? /usr/portage/profiles/package.mask doesn't contain it. TIA. Tamas Sarga -- gentoo-user@gentoo.org mailing list
[gentoo-user] nvidia-kernel
Hi, I had nvidia-kernel-8178-r3 and nvidia-glx-8178. Now the latest nvidia-kernel is 8174-r1 with ~x86 keyword. Do anybody knows where nvidia-kernel-8178-r3 disappeared, and why. It is simply disappeared from the repository, I don't find it in /usr/portage/profiles/package.mask. TIA. Tamas Sarga -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] can't compile audacity
Hi, I use -gtk2 -unicode wxgtk1 use flags and wxGTK-2.4.2-r4 and wxGTK-2.6.1 . It works for me on x86 with audacity-1.2.1 . The error message (/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../../libwx_gtk2-2.4.so) hint, that it tries to use gtk2 for the compilation. HTH. Cheers, Tamas Sarga Matias Grana wrote: hi all; I need some help on this one: I can't emerge audacity. If I try to do it, it first pulls wxGTK 2.4.2-r4, and then complains about wxGTK being compiled with unicode support. So it tells me to re-emerge wxGTK with USE=-gtk2. If I do this, then wxGTK complains. So I have to emerge it with -unicode. And then I get the following error: /usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../../libwx_gtk2-2.4.so: undefined reference to `vtable for wxFileProto' collect2: ld returned 1 exit status make[1]: *** [../audacity] Error 1 make[1]: Leaving directory `/var/tmp/portage/audacity-1.2.1/work/audacity-src-1.2.1/src' make: *** [audacity] Error 2 If I use -gtk2 -unicode, then wxGTK tells that I should at least USE=wxgtk1. When I do it, then audacity again fails on compilation with the same error. What should I do here? Thanks in advance, Matias -- gentoo-user@gentoo.org mailing list
[gentoo-user] USB hub problem
Hi, I've got a problem with my USB hub. It is included in an LG 795FT Plus CRT monitor. With gentoo-sources-2.6.12-r10 it works like a charm, but with later kernel it has a problem. I tried it with gentoo-sources and vanilla-sources too. The problem is that, it gives kernel hub 1-0:1.0: connect-debounce failed, port 1 disabled error, when I boot. After it I can not resolve the trouble, I tried to pull out and plug it again without success. The one and only way to get it work is pull it out, poweroff the computer, power off the monitor, power off the UPS (it supplies the PC and the monitor too), boot in and after boot plug the hub to the PC. The hub isn't resetting properly or I don't know with the new kernels. Any advice? TIA. Tamas Sarga -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] CD and DVD indexing tool
Hi, Tom Eastman wrote: Hey all, I'm looking for a utility that could be used for indexing the contents of the dozens and hundreds of CDRs and DVDRs that I've amassed over the years. I was kind of thinking just a heap of text files with the contents of 'tree' or 'ls -R' or something, but it would be nicer if there was some kind of metadata gathering, such as ID3 tags / JFIF / MPEG info etc. etc. Are there tools available that are any good at this? Any suggestions? Thanks! Tom Try cdcat (cdcat.sourceforge.net)! HTH. Cheers, Tamas Sarga -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Optical mouse lights off on kernel 2.6.14 but works on kernel 2.4.30
Raphael Melo de Oliveira Bastos Sales wrote: Hi there, I got a new VCOM optical mouse, model C235-PS2-V. And I'm having problems with it. On Windows XP or with the Linux kernel 2.4.30 (OpenMosix) it works fine. But on linux kernel 2.6.14-r2 (Gentoo Sources), it lights off and stays off unless I halt the system. I believe this is related to udev for two reasons, one because the 2.4 kernel uses devfs unstead of udev, and also because the light goes off when udev is starting. On the dmesg log, there are two entries related to the mouse: mice: PS/2 mouse device common for all mice input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 The mouse buttons work, but when I press any of them, the cursor goes to the top-right corner of the screen and stays there. Does anybody has any idea of what might be wrong, or how to create a udev rule so the mouse device works as in devfs? Thanks for the attention, Raphael Hi, What Option Device parameter in xorg.conf? It should be /dev/input/mice in most of the cases. HTH. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] Add subject to mails CLI Postfix
Hi, I'm using Postfix on my PC. Some of my programs send mails to me. For example Cron and Smartd. Cron mails have subject, but smartd try to use sendmail -s but sendmail says it is invalid argument. How can I send mails with subject on CLI? TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Add subject to mails CLI Postfix
Willie Wong wrote: On Sat, Dec 03, 2005 at 11:59:27AM +0100, Tamas Sarga wrote: Hi, I'm using Postfix on my PC. Some of my programs send mails to me. For example Cron and Smartd. Cron mails have subject, but smartd try to use sendmail -s but sendmail says it is invalid argument. How can I send mails with subject on CLI? mail, from mail-client/mailx From my smartd.conf /dev/hda -a -m root,wwong -s (S/../../5/02|L/../(02|17)/./06) -M exec /bin/mail /dev/hdb -a -m root,wwong -s (S/../../5/04|L/../(05|22)/./06) -M exec /bin/mail W Thanks a lot for all the response. I choosed Willie's solution, it works like a charm. Cheers, -- Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] lockup and freeze
On Tue, 1 Nov 2005, Mike Williams wrote: On Tuesday 01 November 2005 11:17, Tamas Sarga wrote: I have a problem. My PC lockups time to time with the attached dmesg. It occurs once or twice a week. After a minute or so it comes back, and the computer works again. At last time it dropped lost interrupts into dmesg, but I can't save it because it didn't come back after ten minutes and I had to reset the machine. What can be the problem? What other informations do you need? I'd say your hard drive/ide controller is about to die, or perhaps the cable isn't seated properly or broken. Check that the IDE cable is seated properly, and not damaged at all. Install, and run, smartmontools. That could give you loads of info. -- Mike Williams Hi, Thanks for all the responses. It seems that I'm not as unfortunate as it seemed at first glance, but on the other hand I'm not as good in hardwares as I thought. The lockups and freezes are gone for three days. The problem was that my 8 mm system fan was on the same power-cable as my HDD. It disturbed the drive. I linked the fan to the motherboard, it is fine at the moment. I hope my mobo will be able to supply two fans, one for CPU and one for system. I would have never thought that a 8mm fan can disturb a HDD's power supply. TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] lockup and freeze
Hi, I have a problem. My PC lockups time to time with the attached dmesg. It occurs once or twice a week. After a minute or so it comes back, and the computer works again. At last time it dropped lost interrupts into dmesg, but I can't save it because it didn't come back after ten minutes and I had to reset the machine. What can be the problem? What other informations do you need? TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel!Linux version 2.6.12-gentoo-r10 ([EMAIL PROTECTED]) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 Mon Oct 10 22:13:35 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 1fff (usable) BIOS-e820: 1fff - 1fff8000 (ACPI data) BIOS-e820: 1fff8000 - 2000 (ACPI NVS) BIOS-e820: fec0 - fec01000 (reserved) BIOS-e820: fee0 - fee01000 (reserved) BIOS-e820: fff8 - 0001 (reserved) 511MB LOWMEM available. found SMP MP-table at 000fb920 On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE0 Processor #0 6:6 APIC version 17 I/O APIC #2 Version 2 at 0xFEC0. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 2000 (gap: 2000:dec0) Built 1 zonelists Kernel command line: BOOT_IMAGE=2.6.12-r10 ro root=302 mapped APIC to d000 (fee0) mapped IOAPIC to c000 (fec0) Initializing CPU#0 CPU 0 irqstacks, hard=c044e000 soft=c044d000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1150.680 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515140k/524224k available (2235k kernel code, 8528k reserved, 932k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2260.99 BogoMIPS (lpj=1130496) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff CPU: After vendor identify, caps: 0383fbff c1cbfbff CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 0020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is :01:00.0 PCI: Using IRQ router default [1106/3147] at :00:11.0 PCI-APIC IRQ transform: :00:06.0[A] - IRQ 17 PCI-APIC IRQ transform: :00:07.0[A] - IRQ 18 PCI-APIC IRQ transform: :00:07.1[A] - IRQ 18 PCI-APIC IRQ transform: :00:08.0[A] - IRQ 19 PCI-APIC IRQ transform: :00:0a.0[A] - IRQ 17 PCI-APIC IRQ transform: :00:11.1[A] - IRQ 16 PCI-APIC IRQ transform: :00:11.2[D] - IRQ 21 PCI-APIC IRQ transform: :00:11.3[D] - IRQ 21 PCI-APIC IRQ transform: :01:00.0[A] - IRQ 16 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1130672575.126:0): initialized inotify device minor=63 Initializing Cryptographic API Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: AGP aperture is 128M @ 0xe000 [drm] Initialized drm 1.0.0 20040925 ipmi message handler version v33 ipmi device interface version v33 IPMI System Interface driver version v33, KCS version v33, SMIC version v33, BT version v33 ipmi_si: Trying kcs at I/O port 0xca2 ipmi_si: Trying smic at I/O port 0xca9 ipmi_si: Trying bt at I/O port 0xe4 ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver version v33 Copyright (C) 2004 MontaVista
Re: [gentoo-user] USB problem(maybe related to udev)
On Sat, 22 Oct 2005, Jonathan Wright wrote: Date: Sat, 22 Oct 2005 15:24:01 +0100 From: Jonathan Wright [EMAIL PROTECTED] Reply-To: gentoo-user@lists.gentoo.org To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] USB problem(maybe related to udev) Tamas Sarga wrote: I'm affraid, that my system was somehow hybrid udev-devfs system until I removed devfsd for gentoo-sources-2.6.13. IIRC, the new udev systems require you to remove the /etc/udev/rules.d before upgrading - have you given that a go? -- Jonathan Wright ~ mail at djnauk.co.uk ~ www.djnauk.co.uk Hi, Thanks for the response. I removed /etc/udev/rules.d/* and reemerged udev without success. I set RC_DEVICE_TARBALL=no, but the problem is the same. Everything works except my USB hub, it sends hub 2-0:1.0: connect-debounce failed, port 2 disabled messages. Now I think I have a full-udev system, but there must be some error. Where should I investigate the problem? TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] PANIC !!!!
On Sat, 22 Oct 2005, Hemmann, Volker Armin wrote: direct experience. I have seen xine and mplayer break multiple times or KDE loosing its themes, because of qt updates or wesnoth. And that are the ones I remember without to much brain work. That is why I am healed from --deep updates Hi, Just a short side-note. If you don't use --deep, than you *should* see the GLSAs careful, 'cause a library can has security hole and a rock-solid backdoor is not a good thing. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerging without Internet connection
On Mon, 24 Oct 2005, Michael Crute wrote: On 10/24/05, Gentoo Voyager [EMAIL PROTECTED] wrote: Dear all, My home gentoo box dos't have a internet connection, but i need to install Sendmail on my PC( for testing perposer), any one know how to do it without internet cennection.. You need to find a gentoo box on an internet connection and use emerge to fetch the sources then dump them in your distfiles directory and away you go. -Mike Hi, You don't need *Gentoo* machine on the net. You can do an emerge --fetch --pretend and it will show what you should download. After it you can download needed files with a non-gentoo machine too. HTH. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] USB problem(maybe related to udev)
Hi, I have a problem. I have a built-in USB hub in my monitor. I was able to use it, but two weeks ago it startedto send: hub 2-0:1.0: connect-debounce failed, port 2 disabled lines into my dmesg. Since then the devices what are connected to this hub haven't worked. I'm affraid, that my system was somehow hybrid udev-devfs system until I removed devfsd for gentoo-sources-2.6.13. My /etc/conf.d/rc has RC_DEVICES=udev, but I don't know what should be set RC_USE_FSTAB. It is no at the moment. If I connect a device directly to my PC, then it works, only the hub is screwed up. The hardware is good 'cause it works with Knoppix. What information do you need to help me? TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] thunderbird and get more themes
Hi, I've a problem with mozilla-thunderbird. I read the thread about Thunderbird stops opening firefox, I added the there mentioned line to prefs.js. The links in mails work fine, but when I open the themes window and click on get more themes link, nothing happens. What should I do? I use Mozilla-thunderbird-1.0.6-r2 and mozilla-firefox-1.0.7-r2. TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xorg and transparency
On Sat, 1 Oct 2005, Hemmann, Volker Armin wrote: Hi, Also, I have experienced a few problems. Firefox window got fully transparent somehow and I couldn't get it back. If I try to log out, the dialog where it asks logout/restart/shutdown doesn't appear also. gnome-panel goes to the back, and windows appear in front of them. Kinda small bugs, but still bugs! Has anyone managed to get it working fine and fast? yes, in KDE. erything looks very nice, and everything is very fast ;) Hi, Really fast? I tried it also. I didn't meet any problem except the speed. I set RenderAccel TRUE, and it has changed far faster than without it, but it is very slow anyway. Without transparency I can change across virtual desktops from a second to another, but with it it takes 3 seconds. Did I make some mistakes? I added tha composite modul, and renderaccel. I didn't use AllowGLXWithComposite, I thought it is for ATI, am I right? I have AMD 1800+ XP, 512 MB RAM, Nvidia FX5200 AGP and I use KDE 3.4. I didn't use xcompmgr and transset, only the settings in the Kontrolcenter. Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] ccache taking way too long time
On Sun, 25 Sep 2005, Fernando Meira wrote: Hi, I been using ccache for sometime since its mail goal is to speedup common compiling sets. This is great when updating several packages. However, every time that a package is to be emerge/updated my system waits for ccache some long minutes. This happens twice, at the emerge start and end. For some small packages, it takes more time to handle ccache than compiling the package itself... so I wondering if this is normal, or it is something mis-configured? Here is how it looks: emerge (2 of 10) media-sound/cdparanoia-3.9.8-r2 to / * Adjusting permissions on ccache in /root/.ccache * Adjusting permissions on ccache in /root/.ccache Downloading ftp://ftp.tu-clausthal.de/pub/linux/... (...) Completed installing cdparanoia-3.9.8-r2 into /var/tmp/portage/cdparanoia-3.9.8-r2/image/ Merging media-sound/cdparanoia-3.9.8-r2 to / * Adjusting permissions on ccache in /root/.ccache (...) Fernando Hi, I also use ccache for a some time. I use $CCACHE_DIR=/var/cache/ccache/ ls -la /var/cache/ccache drwxrws--- 18 portage portage4096 Sep 25 16:29 . drwxr-xr-x 7 rootroot 4096 Oct 14 2004 .. drwxr-sr-x 18 portage portage4096 Oct 24 2004 0 drwxr-sr-x 18 portage portage4096 Oct 24 2004 1 drwxr-sr-x 18 portage portage4096 Oct 24 2004 2 snip My portage user is portage. I haven't got the mentioned problem. What are your settings? Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] USB sync/async mount
Hi, I've read some docs about mount of USB keys, but I can not figure out that if I have /dev/sda1 /mnt/usbautonoauto,user 0 0 in my /etc/fstab, then my key would be mounted sync, or async mode? TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] trouble with USB memory
On Fri, 23 Sep 2005, Arran Fraser wrote: To me, that implies that it may have been another package I upgraded (udev?) that is causing the change... but unfortunately I don't remember exactly what programs were on the list of updates. -- Arran Hi, You can see all emerges in date order in /etc/emerge.log file. HTH. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] emerge gnome
On Wed, 21 Sep 2005, Stewart Taylor wrote: Hi Trivial yes, but easily overlooked. I have 1.6 GB free and the file length is correct. Stewart Very trivial question. Have you got enough freespace? Is the saved file equal in size with the said by wget? Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétf? reggel! -- gentoo-user@gentoo.org mailing list Hi, If I saw well, then the file had been downloaded before you tried to emerge (at least the + signs in wget output means it to me). Maybe the permissions on the downloaded file isn't correct. If nothing else helps I would try to emerge --sync, mv the file to somewhere and retry the emerge. HTH. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] emerge gnome
On Wed, 21 Sep 2005, Stewart Taylor wrote: Hi all I'm having problem trying to emerge gnome. A very short while after starting I get the following error message Downloading ftp://ftp.sunet.se/pub/X11/GNOME/sources/libbonoboui/2.10/libbonoboui-2.10.0.tar.bz2 --10:38:48-- ftp://ftp.sunet.se/pub/X11/GNOME/sources/libbonoboui/2.10/libbonoboui-2.10.0.tar.bz2 = `/usr/portage/distfiles/libbonoboui-2.10.0.tar.bz2' Resolving ftp.sunet.se... 194.71.11.70, 2001:6b0:19::64 Connecting to ftp.sunet.se[194.71.11.70]:21... connected. Logging in as anonymous ... Logged in! == SYST ... done.== PWD ... done. == TYPE I ... done. == CWD /pub/X11/GNOME/sources/libbonoboui/2.10 ... done. == SIZE libbonoboui-2.10.0.tar.bz2 ... Done. == PASV ... done.== REST 796,762 ... done. == RETR libbonoboui-2.10.0.tar.bz2 ... done. Length: 796,762 [0 to go] 100%[+] 796,762 --.--K/s 10:38:49 (0.00 B/s) - `/usr/portage/distfiles/libbonoboui-2.10.0.tar.bz2' saved [796,762] !!! Couldn't download libbonoboui-2.10.0.tar.bz2. Aborting. When I check for /usr/portage/distfiles/libbonoboui-2.10.0.tar.bz2 its there. Anyone got any ideas about this TIA Stewart -- gentoo-user@gentoo.org mailing list Hi, Very trivial question. Have you got enough freespace? Is the saved file equal in size with the said by wget? Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Analog acquisition
On Sat, 10 Sep 2005, Luigi Pinna wrote: Hello! I have a lot of problems with my TV card I can see TV (but only with tvtime and not with xawtv or kdetv), but I can't use teletext (for example with alevt) or to select a external source like S-Video. How can I find the problem? Without xawtv I don't know other system from S-Video to record... (cinelerra find nothing and kino works only with digital cameras) I can't configure mplayer to use s-video because it doesn't see a tuner... Any suggestion? Thanks a lot, Luigi Hi, I realized it too, but in the past I was able to record with xawtv. I haven't done it for a time, yesterday I tried to record, but I didn't see anything in xawtv. I emerged kdetv, it found the channels with the wizard, but didn't show anything after. Tvtime works well. I tought it is my fault at some point, but if you has this problem also, then maybe it isn't. How could we discover it? I searched forums, but can't find anything related. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] question about revdep-rebuild
Hi, I confused about revdep-rebuild. I thought that revdep-rebuild without any parameter would investigate all of my bin, and a --soname parameter will investigate just about this .so file. Today I had done an emerge -uD world and openssh didn't work anymore. I read the logs, which said do a revdep-rebuild --soname libcom_err.so.3. The update did more library update, so I did revdep-rebuild without any parameter, and it didn't show anything, but ssh didn't work. I did the adviced revdep-rebuild --soname libcom_err.so.3 and it showed openssh. My question is what exactly does revdep-rebuild without any parameter? After reemerge of openssh the sun shines to me again. TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Other XMMS issue - crash, when I add ogg files to the playlist
On Sun, 12 Jun 2005, István PONGRÁCZ wrote: Hi, When I add ogg files to the playlist, I got segment failure and xmms crash immediatelly. Message is: ead_string() got invalid value None for Blursk.fullscreen_method Message: device: default XS[xmms-sid.c:196]: xs_init() XS[xs_config.c:166]: initializing configuration ... XS[xs_config.c:239]: loading from config-file ... XS[xs_config.c:290]: OK XS[xmms-sid.c:143]: initializing emulator engine #2... XS[xs_sidplay2.cc:99]: init builder #1 XS[xs_sidplay2.cc:123]: ReSID V1.0.1 Engine: XS[xmms-sid.c:160]: init#1: OK, 2 XS[xmms-sid.c:173]: init#2: OK, 0 XS[xs_length.c:390]: sldb_close() XS[xs_stil.c:337]: stildb_close() XS[xmms-sid.c:205]: OK Szegmentációs hiba Valószínűleg hibát talált az XMMS-ben. Látogassa meg ezt a címet: http://bugs.xmms.org és töltse ki a hibabejelentőt. I use media-sound/xmms Latest version available: 1.2.10-r15 Latest version installed: 1.2.10-r15 media-plugins/xmms-alsa Latest version available: 1.2.10-r3 Latest version installed: 1.2.10-r3 media-plugins/xmms-esd Latest version available: 1.2.10-r1 Latest version installed: 1.2.10-r1 media-plugins/xmms-mpg123 Latest version available: 1.2.10-r1 Latest version installed: 1.2.10-r1 media-plugins/xmms-musepack Latest version available: 1.1.2 Latest version installed: 1.1.2 media-plugins/xmms-oss Latest version available: 1.2.10-r2 Latest version installed: 1.2.10-r2 media-plugins/xmms-vorbis Latest version available: 1.2.10-r1 Latest version installed: 1.2.10-r1 Is there any experiences about this problem? Hi, Try it without Blursk plug-in! Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Recompiling the whole system
On Tue, 7 Jun 2005, Richard Fish wrote: Your best bet is probably emerge --emptytree world. That will basically emerge the current version of world and all dependancies. Nothing will be built twice. If you have packages in world file with more versions in more slots, then only the newest version will be recompiled. For example old KDE versions wouldn't be recompiled. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to delete messages from server in Kmail
On Sun, 29 May 2005, askar ... wrote: I see. Very sad. Do other mail clients like sylpheed-claws or thunderbird support this feature? askar On 5/29/05, Dmitri Vassilenko [EMAIL PROTECTED] wrote: On Saturday May 28 2005 23:26, askar ... wrote: Does anybody know how to delete messages from server when the messages deleted in Kmail ? I just realized I mentioned the wrong feature. The one you're referring to hasn't been implemented yet. :( Its bug report: http://bugs.kde.org/show_bug.cgi?id=31114 Cheers, Dmitri Hi, Please do not top-post, thanks. Thunderbird can do some similar thingie. It can remove the mails from server, when you move the mail from the local inbox. In the past was the mail-client of Mozilla Suite. It can do exactly what you want. After it Thunderbird add a ?feature?, delete from server not only on empty thrash, but move from local inbox. This feature make message filtering impossible. Unfortunately (at least from this point of view) there won't be more official Mozilla Suite, just Firefox Thunderbird. HTH. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] KDE 3.4.1 released
On Tue, 31 May 2005, Andreas Karlsson wrote: On Tuesday 31 May 2005 18.18, Holly Bostick wrote: Do you mean -alsa, or -arts? If the latter (which makes more sense, given your first sentence), I hope not, as I am about to do the exact same thing. I ment -arts +alsa. Thinking about one thing, typing another. :) At least, I hope so, or I'll be two days compiling arts support out and back in myself :) . Same for me. Crossing my fingers. Best regards, Andreas Karlsson Hi, I'll cross my fingers for you. Please send the results and conclusions back. I'm curious. TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] [OT] temperature of sys. and hdd
Hi, I'd like to ask, what is the maximum healthy temperature of the system and hdd on a x86 with WD hdd? TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] black screen (or freeze) at boot up after recompiling kernel
On Sat, 14 May 2005, askar ... wrote: Thanks. I'm using lilo. Now I recompiled kernel again and did #lilo After that I'm able to boot the system. It means the clue was in lilo? askar Hi, It means, that if you be sure, you should reinstall (#lilo) lilo after kernel upgrade. HTH. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] new install - no network?
On Fri, 13 May 2005, tj wrote: Sorry for the newb post here. I figured out what I screwed up. I have an e100 and I didn't get it into my kernel. Do i have to recompile? or? is there are way around it. - tj Hi, Just a small side-note: On this list the bottom-post is the accepted method. You have to recompile, but don't be affraid. It won't recompile the already compiled parts. [EMAIL PROTECTED] make [EMAIL PROTECTED] make modules_install will do it. The make will decide what to compile, and what not. You would need make modules_install only if compile e100 as a module. If you compile it into kernel, than don't need for make modules_install, but need to copy the new bzImage to /boot/. I'm not sure whether needed, but if you want absolute safety, re-run your lilo or grub. HTH. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] lm_sensor stop freeze
Hi, I can not halt my PC, 'cause when lm_sensors stop, the system freezes. The problem, how I see, that rmmod i2c_viapro can not succeed, cause of Device or resource busy. What can occupy the module in the late state of shutdown? My /etc/conf.d/lm_sensors is the following (generated by sensors-detect): # List the modules that are to be loaded for your system # # Generated by sensors-detect on Sat Feb 12 12:13:44 2005 #These are compiled into the kernel #NOLOADMODULES=YES MODULE_0=i2c-viapro MODULE_1=i2c-isa MODULE_2=eeprom MODULE_3=w83627hf It is an 1800+ Athlon XP with a 2.6.11-r6 gentoo-sources. In addition I don't really understand, why the system freezes instead of a simple error message about rmmod failed and go on. TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT]big partition
On Fri, 6 May 2005, Craig Duncan wrote: I would suggest that you look into performance of different filesytems. If you are interested in a recommendation, I would choose Reiser over ext3 as it has better support for large numbers of small files typical with desktop usage. Hi, I heard lot of urban legend about flying away data from reiser3 4. I can never validate whether was FS, or user error, but some performance dropback for stability is more than acceptable for me. I used to develop home, but I haven't got enough money for UPS, and two HDD with mirroring. I used to create backups every month, but it gives just a minimal safety. So, thanks for your suggestion, but I won't use reiserFS, I know there are thousands of users, with millions of workhours without any trouble, but few negative feedbacks are enough me to fear ;) TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] turn off TV card
Hi, I have a Leadtek WinTV 2000 Deluxe (bt787). It is wonderful, my only problem, that I always hear its sound. I quit from tvtime and start XMMS, and I hear Jockey Ewing while Alannis Morisette is singing :) How can I solve this? TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] NPTL or not on AMD 1800+ desktop
Hi, What do you think. Will I get better performance if I turn on NPTL on a AMD 1800+ Athlon XP 512MB RAM. I use this machine for desktop purposes. KDE, XMMS, Firefox, Tvtime, Kdevelop, Wesnoth, K3B, some audio- video recording and so on. Advantages? Disadvantages? TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] problems with XFCE4
Hi, I emerged XFCE4 and XFCE4-extras. It built without any problem. I start it by KDM, or startxfce4 and it seems weird. There isn't titlebar of the windows, so I can't minimize, or even move, or resize these. Alt+TAB isn't work. I can not change windows. What can be the problem? What information do you need? The logs don't contain any relevant message. TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] [OT]Which TV recorder
Hi, I use tvtime for viewing TV. What do you suggest as a simple tv recorder and why? I just want a simple app. to record from-time to-time x-station to an AVI. My card uses bt787. I read about Mythtv, but I don't want to install Mysql if it isn't absolutely required. BTW why Mythtv depends on Mysql? It can not work without it? What Mythtv use it for? TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] resume emerge after reboot
Hi, I'd like to do an emerge -e world. It would take 3 days, but I can't sleep next to my machine, 'cause of the sound of the 7000RPM CPU cooler. If I start an emerge, then C-c it, shutdown, start the PC at morning, can I resume the emerge -e? TIA. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] vi is mising from the portage
On Wed, 20 Apr 2005, kashani wrote: IIRC it used to be in portage as of around of a year ago. You might be able to track down an ebuild of it in the old ebuilds. I'd have been able to tell you for sure but I wiped it off my last machine last month when I enforced the vim with color syntax standardization. Once you get used to syntax highlighting you can never go back. Plus there is nothing like half your named.conf shifting to red to let you know you typo'ed a } somewhere. kashani If you don't pleased with the built-in colour-schemes (such as me), just copy a colorscheme to $VIMRUNTIME/colour (IIRC) and edit it. HTH. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] /usr/portage
On Wed, 20 Apr 2005, Rodolphe Rocca wrote: rm -f /usr/portage/distfiles/* no risk. Yes, there is no risk, but there are a much better solution, it's called distclean. You can search for it on forum. It is a script, which will remove the sources of packages what are NOT in portage already. Old Openoffice, America's Army, and so on. In addition you can search for doubles with etcat. For example KDE 3.2 and 3.3 use different slots, so maybe you have old KDE which isn't used anymore. The mentioned applications are just for example of course. There were a quite deep thread in the past around saving (conquer back) diskspace. I don't remember the subject, but you could find it if you want. HTH. Cheers, Tamas Sarga Srga Tams -- Make the world confused!Zavard ssze a vilgot! Smile on monday morning!Mosolyogj htf reggel! -- gentoo-user@gentoo.org mailing list
