Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On Thursday 07 December 2006 15:03, Bira wrote: > On 12/7/06, Mick <[EMAIL PROTECTED]> wrote: > > It seems that it has something to do with the joliet thing again that I > > used to burn it. From dmesg: > > > > ISO 9660 Extensions: Microsoft Joliet Level 3 > > ISOFS: changing to secondary root > > > > What does this mean? Why can't my Gentoo read it? Something I need to > > set in the kernel? > > That's probably it - in the "make menuconfig" menu, it should be named > something like "Joliet filesystem support", and be right next to the > option for UDF. Thanks, but I have Joliet configured in the kernel: # cat .config | grep -i JOLIET CONFIG_JOLIET=y as well as UDF: # cat .config | grep -i UDF CONFIG_UDF_FS=y CONFIG_UDF_NLS=y -- Regards, Mick pgp5Vrrysuj9C.pgp Description: PGP signature
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On 12/7/06, Mick <[EMAIL PROTECTED]> wrote: It seems that it has something to do with the joliet thing again that I used to burn it. From dmesg: ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root What does this mean? Why can't my Gentoo read it? Something I need to set in the kernel? That's probably it - in the "make menuconfig" menu, it should be named something like "Joliet filesystem support", and be right next to the option for UDF. -- Bira http://compexplicita.blogspot.com http://sinfoniaferida.blogspot.com -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On Thursday 07 December 2006 11:19, Mick wrote: > On Tuesday 05 December 2006 23:04, rob wrote: > > I Just use dvdrip emerge it works fine. > > I have used dvdrip and it created an avi file. I have come across two > issues since which I am not sure how to resolve: > > 1. Although I set the size of the media to 4700MB, dvdrip created a file > which is just 2.9G (according to K3B). > 2. I burned it to a DVD, but cannot mount it! I am lost as to why I can't > mount the darn thing. I get a message: > > # mount -t udf /dev/dvd /mnt/dvd > mount: No medium found > > I tried UDF because auto, or iso9660, didn't work either. I tried > mounting/playing it on a colleague's WinXP box and it worked fine. What's > up with this? > > This is what my fstab has: > > /dev/dvd /mnt/dvd auto,iso9660,udf noauto,ro,user,exec 0 0 > It seems that it has something to do with the joliet thing again that I used to burn it. From dmesg: ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root What does this mean? Why can't my Gentoo read it? Something I need to set in the kernel? -- Regards, Mick pgpvooupPlkmi.pgp Description: PGP signature
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On Tuesday 05 December 2006 23:04, rob wrote: > I Just use dvdrip emerge it works fine. > I have used dvdrip and it created an avi file. I have come across two issues since which I am not sure how to resolve: 1. Although I set the size of the media to 4700MB, dvdrip created a file which is just 2.9G (according to K3B). 2. I burned it to a DVD, but cannot mount it! I am lost as to why I can't mount the darn thing. I get a message: # mount -t udf /dev/dvd /mnt/dvd mount: No medium found I tried UDF because auto, or iso9660, didn't work either. I tried mounting/playing it on a colleague's WinXP box and it worked fine. What's up with this? This is what my fstab has: /dev/dvd /mnt/dvd auto,iso9660,udf noauto,ro,user,exec 0 0 Any suggestions on either front would be great. -- Regards, Mick pgpRYjrznBvIM.pgp Description: PGP signature
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
I Just use dvdrip emerge it works fine. > On Monday 04 December 2006 11:57, [EMAIL PROTECTED] wrote: > > I had problems with DVD DL media, too. > > It stopped with a write failure just before beginning to burn the second > > layer. I tried Verbatim DL media and it worked very well. > > > > Since then I _ONLY_ used Verbatim media, I didnt have anymore problems > > burning. > > I am placing an order as I'm writing this. Thanks for the hint! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On Monday 04 December 2006 11:57, [EMAIL PROTECTED] wrote: > I had problems with DVD DL media, too. > It stopped with a write failure just before beginning to burn the second > layer. I tried Verbatim DL media and it worked very well. > > Since then I _ONLY_ used Verbatim media, I didnt have anymore problems > burning. I am placing an order as I'm writing this. Thanks for the hint! -- Regards, Mick pgppJXRu3fcUq.pgp Description: PGP signature
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
I am not an expert about this. I have used dvd:rip to copy a dvd DL file (8+GB) to HDD. After mounting the image as a loop device (see man mount) I was able to burn the image to a disk with dvd9to5. It worked in that particular instance. Alan On 12/4/06, Iain Buchanan <[EMAIL PROTECTED]> wrote: On Sun, 2006-12-03 at 18:54 +, Mick wrote: > I noticed that there are at least three DVD rip apps in portage: > > media-video/dvdrip > media-video/acidrip > media-plugins/vdr-vdrrip > > How do they compare? I've never found a gui dvd ripper that I really liked. I just transcode the vob files by hand. > Two more Qs: > Running mencoder seems to work in producing a smaller file, but it is a bit > choppy (drops frames). Not sure what the correct options are, this is what I > have used: > = > mencoder vts_01_1.vob -ovc xvid -xvidencopts pass=1 -alang en -oac > mp3lame -lameopts vbr=3 -o movie.avi > = not sure about the frame dropping... did you try x264 as suggest earlier? here's the mencoder options I used to transcode some dv. I've found with mencoder, the best way is to try lots of times, and see what works the best. (Only try a minute at a time, or you'll end up waisting a lot of time :) mencoder -oac lavc -ovc lavc -of mpeg -mpegopts format=dvd -vf scale=720:576,harddup -srate 48000 -af lavcresample=48000 -lavcopts vcodec=mpeg2video:vrc_buf_size=1835:vrc_maxrate=9800:vbitrate=5000:keyint=15:acodec=ac3:abitrate=192:aspect=4/3 -ofps 25 -o tape3/2006.06.30_14-57-41.mpeg tape3/2006.06.30_14-57-41.dv This was after some playing around to get to mpeg2 to burn later to dvd. > If I set it to pass=2 it fails with an error about xvid: you must specify one > or a valid combination of 'bitrate', 'pass', 'quantizer' settings. dunno... try leaving of the "pass" option and see? HTH, -- Iain Buchanan Free Speech Is The Right To Shout 'Theater' In A Crowded Fire. -- A Yippie Proverb -- gentoo-user@gentoo.org mailing list -- Alan Davis, Kagman High School, Saipan [EMAIL PROTECTED] 1-670-256-2043 I consider that the golden rule requires that if I like a program I must share it with other people who like it. Richard Stallman -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On Sun, 2006-12-03 at 18:54 +, Mick wrote: > I noticed that there are at least three DVD rip apps in portage: > > media-video/dvdrip > media-video/acidrip > media-plugins/vdr-vdrrip > > How do they compare? I've never found a gui dvd ripper that I really liked. I just transcode the vob files by hand. > Two more Qs: > Running mencoder seems to work in producing a smaller file, but it is a bit > choppy (drops frames). Not sure what the correct options are, this is what I > have used: > = > mencoder vts_01_1.vob -ovc xvid -xvidencopts pass=1 -alang en -oac > mp3lame -lameopts vbr=3 -o movie.avi > = not sure about the frame dropping... did you try x264 as suggest earlier? here's the mencoder options I used to transcode some dv. I've found with mencoder, the best way is to try lots of times, and see what works the best. (Only try a minute at a time, or you'll end up waisting a lot of time :) mencoder -oac lavc -ovc lavc -of mpeg -mpegopts format=dvd -vf scale=720:576,harddup -srate 48000 -af lavcresample=48000 -lavcopts vcodec=mpeg2video:vrc_buf_size=1835:vrc_maxrate=9800:vbitrate=5000:keyint=15:acodec=ac3:abitrate=192:aspect=4/3 -ofps 25 -o tape3/2006.06.30_14-57-41.mpeg tape3/2006.06.30_14-57-41.dv This was after some playing around to get to mpeg2 to burn later to dvd. > If I set it to pass=2 it fails with an error about xvid: you must specify one > or a valid combination of 'bitrate', 'pass', 'quantizer' settings. dunno... try leaving of the "pass" option and see? HTH, -- Iain Buchanan Free Speech Is The Right To Shout 'Theater' In A Crowded Fire. -- A Yippie Proverb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On 03/12/06, Grant Edwards <[EMAIL PROTECTED]> wrote: On 2006-12-03, Stroller <[EMAIL PROTECTED]> wrote: > I've never used K3B myself, but its site is not clear whether it > handles the DeCSS part of the DVD rip. I've never used K3B either. If I want to make an exact (decrypted, dereionalize) copy, I just do this: $ dvdbackup -M -i /dev/sr0 -o dvds $ growisofs -dvd-compat -Z /dev/sr0 -dvd-video dvds/ > CSS is the system used to region-restrict DVDs, and AFAICT it > works by encrypting the files on the disk against a key stored > in a special part of the DVD's header. This "header" part of > the DVD is not writable by normal DVD-burners (I have heard > that "authoring" DVD- burners which support it cost several > thousand pounds), so a "bitwise" copy of a DVD cannot be > decrypted (because the key is missing). > > As I understand it, in order to copy DVD movies one must first > make a copy of the DVD's files - with the region-encoding > removed - onto hard-disk, then burn this as a new DVD > "compilation". The result is an R0 disk which should play fine > in any standard player. Exactly. The dvdbackup/growisofs method works fine for making same-size copies. This is getting me down: = $ dvdbackup -M -i /dev/dvd -o dvds $ growisofs -dvd-compat -Z /dev/dvd -dvd-video dvds/PIRATESOFTHECARIBBEAN Executing 'mkisofs -dvd-video dvds/PIRATESOFTHECARIBBEAN | builtin_dd of=/dev/dvd obs=32k seek=0' 0.14% done, estimate finish Sun Dec 3 21:55:10 2006 0.29% done, estimate finish Sun Dec 3 21:55:10 2006 0.43% done, estimate finish Sun Dec 3 21:55:10 2006 /dev/dvd: splitting layers at 175 blocks /dev/dvd: "Current Write Speed" is 2.5x1385KBps. 0.57% done, estimate finish Sun Dec 3 22:27:14 2006 0.71% done, estimate finish Sun Dec 3 22:27:48 2006 0.86% done, estimate finish Sun Dec 3 22:28:12 2006 1.00% done, estimate finish Sun Dec 3 22:30:09 2006 1.14% done, estimate finish Sun Dec 3 22:30:09 2006 [snip...] 49.86% done, estimate finish Sun Dec 3 22:32:08 2006 50.00% done, estimate finish Sun Dec 3 22:32:07 2006 50.14% done, estimate finish Sun Dec 3 22:32:07 2006 50.29% done, estimate finish Sun Dec 3 22:32:11 2006 50.43% done, estimate finish Sun Dec 3 22:32:10 2006 :-[ [EMAIL PROTECTED] failed with SK=3h/ASC=0Ch/ACQ=00h]: Input/output error :-( write failed: Input/output error = This must be the third wasted DL DVD. I think that I will need to concentrate on transcoding the darn thing from now on. I wish I could pin point the problem. When I tried playing the DVD in M$Windows it complained about the region not being set - but I didn't have any such problem in Linux. Nero express won't even see the DL disk, just shows the size of CD. Could it be something to do with the firmware? -- Regards, Mick -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Transcoding movie DVD to MPEG4?
On Sunday 03 December 2006 18:18, Grant Edwards wrote: > On 2006-12-03, Uwe Thiem <[EMAIL PROTECTED]> wrote: > > On 03 December 2006 15:28, Mick wrote: > >> Hi All, > >> > >> I want to copy a movie from a DVD which I bought in a shop, to another > >> DVD to take with me on holiday. I'll be playing back the copy on my > >> laptop and (if it is feasible) the hotel's DVD player. > >> > >> I thought that K3B and a double layer blank DVD+R is all I need to burn > >> an iso image of the DVD. After two expensive coasters (see other recent > >> topic) I came to the conclusion that the combination of > >> K3B/Phillips-DVD8421/Imation-DVD+R DL will just not work. I could start > >> trying out different brands of DVD+R DL, but I cannot see a sustainable > >> economic case for persevering with my coaster production. :-( > > > > So far, I haven't managed to burn any DL DVD. > > I had a lot of trouble burning DVDs using a USB connected > drive. I moved the drive internal and connected it directly to > the IDE controller and since have had no problems burning > either single or double layer. [IIRC, it's an vanilla OEM > Samsung drive.] Thanks for all the suggestions! My Phillips DVD writer is internally mounted. After about half way instead of flipping over and burning the second layer it just fails with an input/output error. I've tried my Gentoo OS and a Knoppix CD just in case it was a matter of OS/application settings, but the same error occurred. I noticed that there are at least three DVD rip apps in portage: media-video/dvdrip media-video/acidrip media-plugins/vdr-vdrrip How do they compare? Two more Qs: Running mencoder seems to work in producing a smaller file, but it is a bit choppy (drops frames). Not sure what the correct options are, this is what I have used: = mencoder vts_01_1.vob -ovc xvid -xvidencopts pass=1 -alang en -oac mp3lame -lameopts vbr=3 -o movie.avi = If I set it to pass=2 it fails with an error about xvid: you must specify one or a valid combination of 'bitrate', 'pass', 'quantizer' settings. The think is I cannot read what it says fully because the character set in my terminal gets screwed up: = videocodec: XviD (720x576 fourcc=44495658 [XVID]) xvid: par=0/0 (vga11), displayed=1024x576, sampled=720x576 xvid: you must specify one or a valid combination of 'bitrate', 'pass', 'quantizer' settings ΣÏάλμα: ÎδÏναÏη η αÏÏικοÏοίηÏη ÏÎ¿Ï Î¿Î´Î·Î³Î¿Ï ÏÎ¿Ï Î²Î¯Î½Ïεο! ÎξοδοÏ... == Any idea how I can fix this? -- Regards, Mick pgp6gM2tdQlE6.pgp Description: PGP signature