Re: [GRASS-user] connecting to wms server
Somewhat getting closer. Now the error is: r.in.wms output=mdt mapserver=http://icvmapas.cetesi.gva.es/wms layers=mdt srs=EPSG:23030 format=geotiff maxcols=1024 maxrows=1024 method=near Calculating tiles... ERROR: r.tileset failed (Sun Jun 13 19:21:58 2010) Command finished (0 sec) Perhaps a problem of my compilation? Manuel Hamish schrieb: Manuel: r.in.wms mapserver=http://icvmapas.cetesi.gva.es/wms?SERVICE=WMSVERSION=1.1.1REQUEST=GetCapabilities layers=mdt output=mdt try mapserver=http://icvmapas.cetesi.gva.es/wms -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] connecting to wms server
Hi, I am trying to connect to wms servers in Spain. Unfortunately it does not work! It delivers the following: ERROR: Unable to get capabilities: http://ovc.catastro.meh.es/Cartografia/WMS/ServidorWMS.aspx?REQUEST=GetCapabilitiesSERVICE=WMS?service=WMSrequest=GetCapabilitiesversion=1.1.1 I have the same problem with all the servers I try to connect. With QGIS it works fine... I am using GRASS 7 on UBUNTU. Any hint? Manuel -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] connecting to wms server
Hi Hamish, thanks for the first hint, now it loads the list of available data. Nevertheless, it still does not import the requested data. I use the wxPython frontend command, there I get: r.in.wms mapserver=http://icvmapas.cetesi.gva.es/wms?SERVICE=WMSVERSION=1.1.1REQUEST=GetCapabilities layers=mdt output=mdt Calculating tiles... Done: requesting 1 tiles Downloading tiles... Importing tile '0.geotiff'... ERROR 4: `/media/maxtor/GRASSDATA/wms_download/mdt/0.geotiff' not recognised as a supported file format. ERROR: gdalwarp failed (Fri Jun 11 19:13:51 2010) Command finished (0 sec) when typing directly r.in.wms another frontend option opens, where I can choose the format. Coosing jpeg the following occurs: r.in.wms -a output=mdt mapserver=http://icvmapas.cetesi.gva.es/wms?SERVICE=WMSVERSION=1.1.1REQUEST=GetCapabilities layers=mdt srs=EPSG:23030 format=jpeg maxcols=1024 maxrows=1024 method=bilinear Calculating tiles... ERROR: r.tileset failed Hope you can find more little things, by now I am approximating! Thanks a lot! Manuel Hamish schrieb: please post full command line and region info.. try the -g GET method flag. --- On Fri, 6/11/10, Manuel Seeger manuel.see...@wur.nl wrote: From: Manuel Seeger manuel.see...@wur.nl Subject: [GRASS-user] connecting to wms server To: GRASS user list grass-user@lists.osgeo.org Date: Friday, June 11, 2010, 4:41 AM Hi, I am trying to connect to wms servers in Spain. Unfortunately it does not work! It delivers the following: ERROR: Unable to get capabilities: http://ovc.catastro.meh.es/Cartografia/WMS/ServidorWMS.aspx?REQUEST=GetCapabilitiesSERVICE=WMS?service=WMSrequest=GetCapabilitiesversion=1.1.1 I have the same problem with all the servers I try to connect. With QGIS it works fine... I am using GRASS 7 on UBUNTU. Any hint? Manuel -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone:+ 31 317 486617 fax:+ 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] error in v.what.vect (grass70)
Hello all, I'm using grass 7.svn (r39763) on ubuntu 9.10. Querying with v.what.vect I get the followng error: v.what.vect vector=zemmer_poi...@zemmer_som column=DRP qvector=drp_cl...@zemmer qcolumn=Prozess Traceback (most recent call last): File /usr/local/grass-7.0.svn/scripts/v.what.vect, line 90, in module main() File /usr/local/grass-7.0.svn/scripts/v.what.vect, line 83, in main upload = to_attr, NameError: global name 'to_attr' is not defined On grass64 it works quite good! Best regards Manuel -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] unable to locate ft2build.h
Hello! I'm trying to compile grass7 on a 64bit ubuntu 9.04. Unfortunately, I get an error: checking for location of FreeType includes... /usr/include/ checking for ft2build.h... no configure: error: *** Unable to locate FreeType includes. man...@l0118350:~/grass_trunk$ locate ft2build.h /usr/include/ft2build.h The thing is, that I give the path to the ft2build.h location, but I still get the error. What can be wrong? Thanks in advance Manuel -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] unable to locate ft2build.h
Hi Nikos, thanks! If everything could be so easy! Greetings to Freiburg! Manuel Nikos Alexandris schrieb: Manuel: Hello! I'm trying to compile grass7 on a 64bit ubuntu 9.04. Unfortunately, I get an error: checking for location of FreeType includes... /usr/include/ checking for ft2build.h... no configure: error: *** Unable to locate FreeType includes. man...@l0118350:~/grass_trunk$ locate ft2build.h /usr/include/ft2build.h The thing is, that I give the path to the ft2build.h location, but I still get the error. What can be wrong? Hi Manuel! What are the configuration parameters you use? Try to include the following: --with-freetype=yes --with-freetype-includes=/usr/include/freetype2/ and (re-)compile. Nikos -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] r.roughness again
Hello all, we shifted now to my computer, running under jaunty, grass 6.4. Trying r.roughness we have still some problems: GRASS 6.4.0svn (Roughness_m):~/grass-addons ./r.roughness map=DGM.rough.m grid=3 [: 221: 1: unexpected operator Scanning input for column types... Maximum input row length: 0 Maximum number of columns: 0 Minimum number of columns: -1 ERROR: x column number minimum last column number (incorrect field separator?) ERROR: Vector map TMP_vect not found ERROR: Raster map DGM.rough.m.roughness.3 not found ERROR: Raster map DGM.rough.m.roughness.3 not found in current mapset ERROR: Raster map DGM.rough.m.roughness.3 not found in current mapset Removing vector TMP_vect WARNING: Vector map TMP_vect not found WARNING: TMP_vect nothing removed Surface roughness map created and named [DGM.rough.m.roughness.3]. Consider renaming. Done. Logically, after so many errors, there's no map crated. Whats the problem? Can anybody help? Thanks Manuel -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] r.roughness needs bc
Hello all, I'm trying to use r.roughness on windows vista, built from the osgeo4w. Unfortunately we get the following message: ./r.roughness map=Rough3 grid=0.03 rough=Rough3.roughness.3 /which: bc: unknown command r.roughness: bc required, please install it first/ / / /What is bc?/ /Where can I get this?/ / / /best regards!/ / / /Manuel/ // // // -- __ Dr. Manuel Seeger Dept. of Land Degradation and Development Wageningen University Researchcenter Postal address: P.O. Box 47, 6700 AA Wageningen, The Netherlands Visitors address: Atlas building, Droevendaalsesteeg 4, 6708 PB, room B415 phone: + 31 317 486617 fax: + 31 317 419000. __ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] i. pca and i.cca
Hello, I am using i.pca and i.cca for terrain analysis. As I want to understand the influence of each of the input parameters, I need some information of the output. The eigenvector-info (r.info map=my.pca.map) gives the weight of each of the input maps composing the new pca map. But where get I the eigenvalue of each of the of the principal components? Afterwards I run i.cca on them, for better separability of distinct areas. I have the correlation matrix of the pca, but how do I get the information on the cca? I hope I explained myself... Best regards Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www.uni-trier.de/index.php?id=18521 ___ EGU General Assembly 2009 SSS17. Experimental Methods in Soil Erosion Studies Convener: Seeger, M. Co-Convener:Kuhn, N.; Quinton, J. http://meetingorganizer.copernicus.org/EGU2009/session/930 ___ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] i.gensig
Markus Neteler schrieb: On Fri, Oct 24, 2008 at 10:57 AM, Manuel Seeger [EMAIL PROTECTED] wrote: Hello all, I using grass 6.3.0 on a 64 machine (ubuntu 7.10) When applying i.gensig on a set of 20 rasters for defining 6 different groups I get the following output: Finding training classes ... 6 classes. Calculating class means ... Calculating class covariance matrices... Signature [1] not invertible. Signature [2] not invertible. Signature [3] not invertible. Signature [4] not invertible. Signature [5] not invertible. Signature [6] not invertible. Writing signature file [DRP_Zemmer] ... Done. The problem is: the signature file is empty. it may be related to the info Signature [1] not invertible. But I don't know what GRASS wants to tell me. I am not sure what happens - apparently imagery/i.gensig/can_invert.c fails. Could you try to reduce the number of input maps for a test? Markus Its long time passed, excuse me I tried reducing the number of rastermaps I get the same message. When I transform the rasters first with PCA I get no error! What is the problem? Best regards Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www.uni-trier.de/index.php?id=18521 ___ EGU General Assembly 2009 SSS17. Experimental Methods in Soil Erosion Studies Convener: Seeger, M. Co-Convener:Kuhn, N.; Quinton, J. http://meetingorganizer.copernicus.org/EGU2009/session/930 ___ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] i.gensig
Hello all, I using grass 6.3.0 on a 64 machine (ubuntu 7.10) When applying i.gensig on a set of 20 rasters for defining 6 different groups I get the following output: Finding training classes ... 6 classes. Calculating class means ... Calculating class covariance matrices... Signature [1] not invertible. Signature [2] not invertible. Signature [3] not invertible. Signature [4] not invertible. Signature [5] not invertible. Signature [6] not invertible. Writing signature file [DRP_Zemmer] ... Done. The problem is: the signature file is empty. it may be related to the info Signature [1] not invertible. But I don't know what GRASS wants to tell me. Can somebody help? Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www.uni-trier.de/index.php?id=18521 ___ EGU General Assembly 2009 SSS15. Experimental Methods in Soil Erosion Studies Convener: Seeger, M. Co-Convener:Kuhn, N.; Quinton, J. ___ ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] grass70 start problems
Hello, I've installed the latest cvs version on an ubuntu hardy heron. When I start grass at a certain mapset, it breaks because it finds ANY .gislock that is set at any mapset in that location. Then it mentions that concurrent use of mapsets is not allowed. Any hint? Thanks Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ EGU General Assembly 2009 SSS15. Experimental Methods in Soil Erosion Studies Convener: Seeger, M. Co-Convener:Kuhn, N.; Quinton, J. ___ New publication: Modelling dominant runoff production processes at the micro-scale – a GIS-based and a statistical approach C. Müller, H. Hellebrand, M. Seeger, and S. Schobel http://www.hydrol-earth-syst-sci-discuss.net/5/1677/2008/hessd-5-1677-2008.pdf please participate in discussion! ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] Error in v.vol.rst
Hallo Frühaufsteher! Here is the output of gregion -p3 projection: 1 (UTM) zone: 30 datum: wgs84 ellipsoid: wgs84 north: 4681874.175 south: 4681826.55 west: 624764.175 east: 624839.625 top:343. bottom: 337. nsres: 0.075 nsres3: 0.10005252 ewres: 0.075 ewres3: 0.10006631 tbres: 0.01 rows: 635 rows3: 476 cols: 1006 cols3: 754 depths: 600 cells: 638810 3dcells:215342400 Thanks! Manuel Markus Neteler schrieb: Hallo Manuel, das war g.region -p aber nicht g.region -p3 :) Markus On Mon, Jun 9, 2008 at 8:35 AM, Manuel Seeger [EMAIL PROTECTED] wrote: Hello Markus, hello Hamish, and List! I imported a transformed shapefile. g.region -p gives: projection: 1 (UTM) zone: 30 datum: wgs84 ellipsoid: wgs84 north: 4681874.175 south: 4681826.55 west: 624764.175 east: 624839.625 nsres: 0.075 ewres: 0.075 rows: 635 cols: 1006 cells: 638810 as it is a gully headcut, I have steep slopes (vertical!) and overhangs and some shadowing... Thanks again! Manuel Hamish schrieb: Manuel Seeger wrote: I trying to generate a 3d DEM of a gully headcut. The point data was gained by terrestrial laser scanner. what is the form of the raw data? x,y,z point cloud? is there only one x,y for each z, or are there overhangs? I ask because if there is only one z for each x,y then perhaps a 2.5D surface is more appropriate and the processing is much simpler: http://grass.osgeo.org/wiki/Help_with_3D#Raster_2.5D_Surfaces that may obscure fine details of steep slopes though, lumping them all into one horizontal cell. Maybe the cell resolution would have to be very small. If that isn't good enough an idea, if you don't mind it, is to switch the z coordinate with x or y when you import and then look at the thing side on. As I am doing my first attempts, I do not change any parameters from that given by default. This is the result: v.vol.rst [EMAIL PROTECTED] wcolumn=dbl_3 tension=40. smooth=0.1 segmax=50 npmin=200 dmin=0.050026 wmult=1.0 zmult=1.0 elev=Olite_3d --overwrite 1511728 records selected from table some points outside of region -- will ignore... strip exists with insufficient data Processing all selected output files will require 1435616 bytes of disk space for temp files There are points outside specified 2D/3D region--ignored 57754 points (total points: 1511728) Points are more dense than specified 'DMIN'--ignored 1131669 points (remain 380059) Percent complete: Error in COGRR! Interp_call failed! Can someone give me an idea if this is my fault? No idea about that. Hamish -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] Error in v.vol.rst
Hello Markus, hello Hamish, and List! I imported a transformed shapefile. g.region -p gives: projection: 1 (UTM) zone: 30 datum: wgs84 ellipsoid: wgs84 north: 4681874.175 south: 4681826.55 west: 624764.175 east: 624839.625 nsres: 0.075 ewres: 0.075 rows: 635 cols: 1006 cells: 638810 as it is a gully headcut, I have steep slopes (vertical!) and overhangs and some shadowing... Thanks again! Manuel Hamish schrieb: Manuel Seeger wrote: I trying to generate a 3d DEM of a gully headcut. The point data was gained by terrestrial laser scanner. what is the form of the raw data? x,y,z point cloud? is there only one x,y for each z, or are there overhangs? I ask because if there is only one z for each x,y then perhaps a 2.5D surface is more appropriate and the processing is much simpler: http://grass.osgeo.org/wiki/Help_with_3D#Raster_2.5D_Surfaces that may obscure fine details of steep slopes though, lumping them all into one horizontal cell. Maybe the cell resolution would have to be very small. If that isn't good enough an idea, if you don't mind it, is to switch the z coordinate with x or y when you import and then look at the thing side on. As I am doing my first attempts, I do not change any parameters from that given by default. This is the result: v.vol.rst [EMAIL PROTECTED] wcolumn=dbl_3 tension=40. smooth=0.1 segmax=50 npmin=200 dmin=0.050026 wmult=1.0 zmult=1.0 elev=Olite_3d --overwrite 1511728 records selected from table some points outside of region -- will ignore... strip exists with insufficient data Processing all selected output files will require 1435616 bytes of disk space for temp files There are points outside specified 2D/3D region--ignored 57754 points (total points: 1511728) Points are more dense than specified 'DMIN'--ignored 1131669 points (remain 380059) Percent complete: Error in COGRR! Interp_call failed! Can someone give me an idea if this is my fault? No idea about that. Hamish -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] Error in v.vol.rst
Hello, I trying to generate a 3d DEM of a gully headcut. The point data was gained by terrestrial laser scanner. As I am doing my first attempts, I do not change any parameters from that given by default. This is the result: v.vol.rst [EMAIL PROTECTED] wcolumn=dbl_3 tension=40. smooth=0.1 segmax=50 npmin=200 dmin=0.050026 wmult=1.0 zmult=1.0 elev=Olite_3d --overwrite 1511728 records selected from table some points outside of region -- will ignore... strip exists with insufficient data Processing all selected output files will require 1435616 bytes of disk space for temp files There are points outside specified 2D/3D region--ignored 57754 points (total points: 1511728) Points are more dense than specified 'DMIN'--ignored 1131669 points (remain 380059) Percent complete: Error in COGRR! Interp_call failed! Can someone give me an idea if this is my fault? Thank you! Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] wxpython start fails
Hello, I start on a recent grass64svn (Ubuntu 8.04) with wxpython and get the followin message: [EMAIL PROTECTED]:~/src/grass6_devel$ grass64 -wxpython Cleaning up temporary files ... Starting GRASS ... Traceback (most recent call last): File /usr/local/grass-6.4.svn/etc/wxpython/gis_set.py, line 31, in module from gui_modules import globalvar File /usr/local/grass-6.4.svn/etc/wxpython/gui_modules/globalvar.py, line 48, in module CheckForWx() File /usr/local/grass-6.4.svn/etc/wxpython/gui_modules/globalvar.py, line 39, in CheckForWx except (ImportError, ValueError, wxversion.VersionError), e: UnboundLocalError: local variable 'wxversion' referenced before assignment Error in GUI startup. If necessary, please report this error to the GRASS developers. Switching to text mode now. Hit RETURN to continue... What is wrong? Thanks Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] wxpython start fails
Uups, I thought I hat installed wxPython... but it was not. Now it works Thanks a lot Martin! Manuel Martin Landa schrieb: Hi, which version of python and wxpython do you use? Martin 2008/5/28 Manuel Seeger [EMAIL PROTECTED]: Hello, I start on a recent grass64svn (Ubuntu 8.04) with wxpython and get the followin message: [EMAIL PROTECTED]:~/src/grass6_devel$ grass64 -wxpython Cleaning up temporary files ... Starting GRASS ... Traceback (most recent call last): File /usr/local/grass-6.4.svn/etc/wxpython/gis_set.py, line 31, in module from gui_modules import globalvar File /usr/local/grass-6.4.svn/etc/wxpython/gui_modules/globalvar.py, line 48, in module CheckForWx() File /usr/local/grass-6.4.svn/etc/wxpython/gui_modules/globalvar.py, line 39, in CheckForWx except (ImportError, ValueError, wxversion.VersionError), e: UnboundLocalError: local variable 'wxversion' referenced before assignment Error in GUI startup. If necessary, please report this error to the GRASS developers. Switching to text mode now. Hit RETURN to continue... What is wrong? Thanks Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] updating table values from another table
Hello all, I want to update the values of selected columns in one vector file with the values from another. I think v.db.update should be the right thing, but I don't know ho to do it (using the dbf driver) Perhaps someone helps me? Thanks in advance! Manuel ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] first littel experience with wxpython GUI
Hi Martin, excuse me for the delay, I was outside the office. Here is the error: GRASS 6.3.svn (Attert_Praktikum):~ ERROR: MAPSET Anne - permission denied ERROR: MAPSET Anne - permission denied ERROR: MAPSET Anne - permission denied ERROR: MAPSET Anne - permission denied GRASS_INFO_ERROR(497,1): MAPSET Anne - permission denied GRASS_INFO_END(497,1) Traceback (most recent call last): File /usr/local/grass-6.3.svn/etc/wxpython/wxgui.py, line 1360, in module sys.exit(main()) File /usr/local/grass-6.3.svn/etc/wxpython/wxgui.py, line 1353, in main app = GMApp(workspaceFile) File /usr/local/grass-6.3.svn/etc/wxpython/wxgui.py, line 1275, in __init__ wx.App.__init__(self, False) File /usr/lib/python2.5/site-packages/wx-2.8-gtk2-unicode/wx/_core.py, line 7836, in __init__ self._BootstrapApp() File /usr/lib/python2.5/site-packages/wx-2.8-gtk2-unicode/wx/_core.py, line 7433, in _BootstrapApp return _core_.PyApp__BootstrapApp(*args, **kwargs) File /usr/local/grass-6.3.svn/etc/wxpython/wxgui.py, line 1291, in OnInit workspace = self.workspaceFile) File /usr/local/grass-6.3.svn/etc/wxpython/wxgui.py, line 157, in __init__ self.NewDisplay(show=False) File /usr/local/grass-6.3.svn/etc/wxpython/wxgui.py, line 1027, in NewDisplay auimgr=self._auimgr, showMapDisplay=show) File /usr/local/grass-6.3.svn/etc/wxpython/gui_modules/wxgui_utils.py, line 77, in __init__ self.Map = render.Map()# instance of render.Map to be associated with display File /usr/local/grass-6.3.svn/etc/wxpython/gui_modules/render.py, line 201, in __init__ self.mapfile = utils.GetTempfile() File /usr/local/grass-6.3.svn/etc/wxpython/gui_modules/utils.py, line 41, in GetTempfile pid=%d % os.getpid()]) File /usr/local/grass-6.3.svn/etc/wxpython/gui_modules/gcmd.py, line 361, in __init__ self.PrintModuleOutput())) gui_modules.gcmd.CmdError Greetings Manuel Martin Landa schrieb: Hi, 2008/3/18, Dr. Manuel Seeger [EMAIL PROTECTED]: [snip] wxpython shows all mapsets present, but then crashes when I try to access those which were created by another user. I did not see any [snip] It seems to work on my laptop, can you send me error message, traceback? Martin -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] wxpython problems
Hello all, I just downloaded the recent 6.3.svn. There I wanted to start using the wxpython-gui. After make I get the following message: Errors in: /home/seeger/grass_trunk/gui/wxpython/vdigit -- In case of errors please change into the directory with error and run 'make'. If you get multiple errors, you need to deal with them in the order they appear in the error log. If you get an error building a library, you will also get errors from anything which uses the library. I follow the instructions, and then: /usr/bin/ld: cannot find -lgdi collect2: ld gab 1 als Ende-Status zurück make: *** [_grass6_wxvdigit.so] Fehler 1 What can I do? I would like to test it! Best regards Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] wxpython problems
Martin Landa schrieb: Hi, 2008/3/17, Dr. Manuel Seeger [EMAIL PROTECTED]: Which version on wxPython are you using? its 2.6.4.0 uups, I thought I had 2.8 is this perhaps the problem? yes, you need wxPython = 2.8.1 Martin Thanks I'll ty and report! Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] NVIZ and rgb ortofotos
Hello all, perhaps its a too simple question, how can I drape a coloured ortofoto on an elevation model with NVIZ? Thanks for any hints! Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] bug in v.db.renamecol
Hello all, I found a small bug in v.db.renamecol working on dbf- database driver, renaming a column, if (like I made) you try to use a column name greater than 10 characters length, then it gives an error warning, and creates a column with the new name (cut at the end to fit 10 char), but does not fill in the column values, and(!) deletes the old column. This is: column data is lost! Cheers Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] highest and lowest point in catchment
Hello all, I hope the questions does not seem too simple, but I have now no real good idea how to solve this simple problem: I need to find the highest and the lowest point within catchments WITH their coordinates (and to get the information about altitude and coordinates, of course) thanks for hints! manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
[GRASS-user] Problems with actual grass6.3.cvs
Hello all, I have compiled the actual grass6.3.cvs When I start it, it hangs up at the start screen of the gis.m gui. Working on Ubuntu 7.10 sun 64 bit Best regards and wishes Manuel -- ___ Dr. Manuel Seeger Wiss. Assistent Scientific Assistant Physische GeographieDpt. of Physical Geography FB VI - Geographie/GeowissenschaftenGeography/Geosciences Universität Trier University of Trier D - 54286 Trier Tel.: +49-651-201 4557 Fax:+49-651-201 3976 Web:http://www-neu.uni-trier.de/index.php?id=9607 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
