Re: VTAMLST - Who needs to read it
If you have a sandbox LPAR, change it to UACC(NONE) and WARNING and then IPL and logon. The ICH408 messages in the log should tell you who needs various accesses that are not already provided. (They will also show which tasks have no user assigned which is something else you would want to correct.) Add those and repeat until there are no ICH408 messages. Then revert to NOWARN and test again. Alternatley, clean out the SMF datasets, IPL and logon and then use MXG or one of the CBT SMF analysis tools to find out which jobs and tasks opened the dataset. You may have to determine which users correspond to which tasks separately. - Original Message - From: Juan Mautalen jgmauta...@yahoo.com.ar To: IBM-MAIN@bama.ua.edu Sent: Friday, March 9, 2012 11:00:34 AM Subject: VTAMLST - Who needs to read it Hi: We currently have our VTAMLST libraries protected with UACC(READ). IBM suggests UACC(NONE) for them (RACF Security Administrator Guide, apendix D- Security for system datasets) . I want to make the change, but of course i know i must be extremely carefull with this change. I need to detect all users needing read access to VTAMLST. Human users are not my problem, my worry is about non-human ones (users of system tasks, started tasks, etc.). What users need read access of VTAMLST? Does any userid associated with a VTAM application need to read VTAMLST? Thanks in advance for your help, Juan Mautalen -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: IKT100I USERID CANCELED immediately after TN3270 connection fail
Networks have failures. On some networks they occur more frequently than others. It's just a fact of life. Some network support organizations are more helpful than others in resolving the cause of these failures. That too is a fact of life. You were the one who mentioned that a major impact of these failures was the data lost by users. We can't solve the failure problem for you but many have suggested ways to minimize the impact the failures have. You are free to follow any of the suggestions you choose but you seem to be expecting somethng else from this group. By the way, none of the five items you mention below seem to my untrained eye to be related to connection failures. - Original Message - From: chen lucky chenluck...@gmail.com To: IBM-MAIN@bama.ua.edu Sent: Sunday, March 4, 2012 7:03:42 PM Subject: Re: IKT100I USERID CANCELED immediately after TN3270 connection fail This thread has nothing to do with ISPF. I just want to know why my TSU address space was canceled duo to connection failure. But thank you all the same. I had checked following point that may be related to this problem. 1, JWT in SMFPRMxx 2, RECONLIM in TSOKEYxx 3, INACTIVE, KEEPINACTIVE and DISCONNECTABLE in TN3270 profile 4, LU definition of TSO USERS 5, MODETAB and DLOGMOD About this subject, look forward that I can get more help and can get it over at end. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: IKT100I USERID CANCELED immediately after TN3270 connection fail
If the data to be saved is from ISPF Edit, have you considered setting the Recover option for your users? - Original Message - From: chen lucky chenluck...@gmail.com To: IBM-MAIN@bama.ua.edu Sent: Saturday, March 3, 2012 2:08:17 AM Subject: IKT100I USERID CANCELED immediately after TN3270 connection fail Hi List, Thanks for your help. Recently I encounter a problem that IKT100I USERID CANCELED immediately after TN3270 connection fail, and It is unacceptable in our shop, because users will lose their work that do not save in time. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: HSM recover backup from an missing tape
You can check the catalog status of an individual dataset with the IDCAMS LISTCAT command or ISPF 3.4 (which will also let you check a group with similar DSNs). However, the easiest way to check all the datasets from the ML2 tape probably is to use the HSM AUDIT command which can report any MCDS entries not found in the catalog. You can check the backup status of a dataset using the HSM LIST command with the DSN and BCDS operands. If the datasets have a common HLQ, you can use the LEVEL operand instead of DSN. In any case, you can use the TTOC listing to build a REXX or CLIST that would issue the appropriate HLIST commands. And when you have recovered as much as you can, it might be good idea to sit down and rethink your decision regarding dulexing ML2 volumes. - Original Message - From: af dc acbi...@gmail.com To: IBM-MAIN@bama.ua.edu Sent: Wednesday, February 29, 2012 7:43:04 PM Subject: HSM recover backup from an missing tape Hello, i've a ttoc list of ml2 tape that i need to check if dsns in it have backup and if they have delete migrat2 catalog entry and recover dsn from a backup. Do you know a expedite way of doing this ?? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: User datasets wrongly catalogued under Master Catalogue
On z/OS 1.11 and probably as far back as OS/390 2.10, I have had no problem using the MERGECAT operand specifying the active master catalog in either direction (source or destination). - Original Message - From: Jeff Holst jeff.ho...@fiserv.com To: IBM-MAIN@bama.ua.edu Sent: Thursday, March 1, 2012 10:31:56 AM Subject: Re: User datasets wrongly catalogued under Master Catalogue Somewhere stuck in the back of mymemory is a restriction that the source catalog for a REPRO MERGECAT cannot be the active master catalog. However, I am not able to find something in the documentation to back up this memory. Maybe this is an old restriction that has since been removed; maybe I cannot find the doc to prove this; maybe I am just getting old. If this is a restriction, you can always bring up the system with another master catalog and connect this master catalog to it and treat it as a user catalog. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: Originality (was: Duplicating SYSOUT ...)
17 USC 106: Subject to sections 107 through 122, the owner of copyright under this title has the exclusive rights to do and to authorize any of the following: (1)to reproduce the copyrighted work in copies or phonorecords; (2)to prepare derivative works based upon the copyrighted work; quoted from http://www.law.cornell.edu/uscode/text/17/106 Is anyone here using an IBM mainframe for personal work? The rest of us work(ed) for companies which probably have legal departements. That is where this discussion belongs. Or, since mainframes are probably used in some hospitals and health insurance companies, we can also discuss the virtues and limitations of self-performed amputations. - Original Message - From: Shmuel Metz (Seymour J.) shmuel+ibm-m...@patriot.net To: IBM-MAIN@bama.ua.edu Sent: Thursday, March 1, 2012 9:52:04 AM Subject: Re: Originality (was: Duplicating SYSOUT ...) In 040601ccf67d$d7ea4060$87bec120$@mcn.org, on 02/28/2012 at 05:02 PM, Charles Mills charl...@mcn.org said: Creating derivative works is a right reserved to the copyright holder. In what country? Do you have a citation for the section of the US Code that prohibits creating, as opposed to distributing or performing, a copyrighted work? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: ISMF/REXX interface.
You might also want to consider why you are repeatedly changing settings which are usually considered stable and needing only relatively infrequent changes. - Original Message - From: jagadishan perumal jagadish...@gmail.com To: IBM-MAIN@bama.ua.edu Sent: Wednesday, February 29, 2012 6:30:43 AM Subject: ISMF/REXX interface. Hi All, Is there a ISMF/REXX interface ? Since I am trying to automate few repeating task which are done via ISMF. I tried googling with the keyword ISMF/REXX but no Luck -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: User datasets wrongly catalogued under Master Catalogue
Responses to a question with different opinions about the best way to solve a problem are nothing new to this list. But the amount of misinformation you received for a relatively simple question probably sets a high water mark I hope we don't challenge ever again. Fortunately you did recieve some workable solutions. The REPRO MERGECAT command reference is in the Access Methods Services manual. If you need further explanatory material, see the Managing Catalogs manual. The DSS commands are described in the DFSMSdss Storage Administration manual. - Original Message - From: Jake anderson justmainfra...@gmail.com To: IBM-MAIN@bama.ua.edu Sent: Tuesday, February 28, 2012 9:44:36 PM Subject: Fwd: User datasets wrongly catalogued under Master Catalogue I agree that this happens when a userid is defined with alias relating to user catalog. typo - it happens when a userid is *not* defined with alias relating to user catalog. -- Forwarded message -- From: Jake anderson justmainfra...@gmail.com Date: Wed, Feb 29, 2012 at 9:11 AM Subject: User datasets wrongly catalogued under Master Catalogue To: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Hi, Recently We have installed a new system Z/OS 1.13. During migration the Users datasets were restored and unfortunately all the user datasets are catalogued under Master catalogue. I agree that this happens when a userid is defined with alias relating to user catalog. I am just trying to understand if it is possible to move all the users dataset catalogued under master catalogue to a user catalogue since the Number of datasets are in big number. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: Format not found
After putting the E to theleft of the member, type a forward slash (/) as the first character in the prompt field. Then press ENTER. This will bring up an Edit Options panel, One of the options is a format name. Clear it to blanks and press ENTER. Subsequent requests to edit or view members of the dataset should no longer look for the format. - Original Message - From: Mainframe admin mainframe.2...@gmail.com To: IBM-MAIN@bama.ua.edu Sent: Monday, February 27, 2012 2:47:37 AM Subject: Format not found Hi When i am trying to open my pds member. i put E against pds member.I am able to view edit the member.i got the msg like format not found.herewith i am attaching the snap of the error..Please help me to sortout the problem -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
