Re: SMPe Apply not working
(Re-posting because ???) I can't locate the original post in this saga, which mentioned a lot of 'no applicable FMID' messages. I'm curious how that happened. When we order general (mass) maintenance, RECEIVE FROMNETWORK examines our SMPE environment and looks only for PTFs that are in fact applicable. It ignores fixes that are already RECEIVED and chooses fixes as needed by installed products. There should be very few 'no applicable' messages. The reported problem calls into question OP's ordering process. Specifically, if specific PTFs are ordered by number, it's up to the customer to vet the list. The only situation I can recall that requires this manual intervention is the rare case where a product cannot be APPLIED because of an error hold on the FMID itself. In that case, RECEIVE FROMNETWORK does not acknowledge the need for maintenance because the FMID is not installed. The fixing PTF must be ordered and installed by name along with the FMID, after which RFN will resume its role. . . J.O.Skip Robinson Southern California Edison Company Electric Dragon Team Paddler SHARE MVS Program Co-Manager 323-715-0595 Mobile 626-543-6132 Office ⇐=== NEW robin...@sce.com -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Friday, June 12, 2020 4:09 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: (External):Re: SMPe Apply not working CAUTION EXTERNAL EMAIL I really appreciate everyone's help here! The issue I had I believe was that I failed to specify FORFMID. However, I need to take a step back and review my SMPe environment. The CSI was handed off to me and I am finding some things wrong, like missing FMIDs for some of my base products. thank you Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
I really appreciate everyone's help here! The issue I had I believe was that I failed to specify FORFMID. However, I need to take a step back and review my SMPe environment. The CSI was handed off to me and I am finding some things wrong, like missing FMIDs for some of my base products. thank you Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
This list doesn't do attachments. > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Bill Giannelli > Sent: Thursday, June 11, 2020 11:36 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMPe Apply not working > > I attached the apply check and the nonapply list > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
really need to see more than just your apply control cards, and IIRC that APPLY PTFS for a new FMIND ( function ) will not apply the FMID you need unless you specify APPLY FORFMID. show the entire apply smpprts and smpout show the FMID received successfully also Carmen Vitullo - Original Message - From: "Bill Giannelli" To: IBM-MAIN@LISTSERV.UA.EDU Sent: Thursday, June 11, 2020 1:29:26 PM Subject: Re: SMPe Apply not working APPLY PTFS BYPASS( HOLDSYSTEM(ACTION,AO,DB2BIND,DEP,DOC,IPL,MULTSYS)) GROUPEXTEND CHECK . -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
I attached the apply check and the nonapply list -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
APPLY PTFS BYPASS( HOLDSYSTEM(ACTION,AO,DB2BIND,DEP,DOC,IPL,MULTSYS)) GROUPEXTEND CHECK . -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
Wrong Global zone specified? -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Thursday, June 11, 2020 12:18 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMPe Apply not working [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] I ran a GIMSUP download, unpack, receive which ran clean. I see the received ptfs in a LIST NOAPPLY. But when I run theAPPLY I get "NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE APPLY". What could I be doing wrong? thanks Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
Those are not the messages I would like to see 1) Provide the APPLY Statement in full. 2) Provide all messages from the APPLY Function from SMOUT DD statement This will help us see what the issues might be. Sometimes when you do an APPLY it is for the incorrect FMID or the wrong SREL. We would like to see something like this . APPLY . GROUP . PTFS . BYPASS ( . HOLDSYSTEM . ) . NOJCLINREPORT . RETRY ( YES ) . . . .GIM42001I THE FOLLOWING CONDITIONS FOR SYSMOD UI68880 WERE NOT SATISFIED, BUT . WERE IGNORED BECAUSE THE BYPASS OPERAND WAS SPECIFIED. PROCESSING . CONTINUES. .GIM35966I SYSTEM HOLD ACTION ORIGINATED BY SYSMOD UI68880 WAS BYPASSED. .GIM35966I SYSTEM HOLD DOC ORIGINATED BY SYSMOD UI68880 WAS BYPASSED. .GIM42001I THE FOLLOWING CONDITIONS FOR SYSMOD UI68931 WERE NOT SATISFIED, BUT . WERE IGNORED BECAUSE THE BYPASS OPERAND WAS SPECIFIED. PROCESSING . CONTINUES. Liette -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Thursday, June 11, 2020 10:27 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMPe Apply not working GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS1 FOR GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS2 FOR GIM24801S ** NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE APPLY COMMAND. GIM59606IDEQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF OEMPP.DB2.V12R02M0.GLOBAL.C GIM59607IDEQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS FOR -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
Ditto, I'd like to also see what was actually received, this is a new product IIRC, so did the FMID actually get received+PTF's ? show what actually got received would also help Carmen Vitullo - Original Message - From: "Dave Gibney" To: IBM-MAIN@LISTSERV.UA.EDU Sent: Thursday, June 11, 2020 12:59:06 PM Subject: Re: SMPe Apply not working And the output from smpout and smprpt > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Binyamin Dissen > Sent: Thursday, June 11, 2020 10:57 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMPe Apply not working > > Show the APPLY statement. > > On Thu, 11 Jun 2020 12:27:00 -0500 Bill Giannelli > wrote: > > :>GIM59603I ENQ WAS SUCCESSFUL FOR SHARED USE OF > OEMPP.DB2.V12R02M0.SMPPTS1 FOR > :>GIM59603I ENQ WAS SUCCESSFUL FOR SHARED USE OF > OEMPP.DB2.V12R02M0.SMPPTS2 FOR > :>GIM24801S ** NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE > APPLY COMMAND. > :>GIM59606I DEQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF > OEMPP.DB2.V12R02M0.GLOBAL.C > :>GIM59607I DEQ WAS SUCCESSFUL FOR SHARED USE OF > OEMPP.DB2.V12R02M0.SMPPTS FOR > :> > :>-- > :>For IBM-MAIN subscribe / signoff / archive access instructions, :>send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > -- > Binyamin Dissen > https://urldefense.com/v3/__http://www.dissensoftware.com__;!!JmPEgB > Y0HMszNaDT!_6uhGc5oLyFkX1gFM7UkUTszrVtcoM27lzV1NlHNZT4lVHciRQy > wMjC6ICRdqw$ > > Director, Dissen Software, Bar & Grill - Israel > > > Should you use the mailblocks package and expect a response from me, you > should preauthorize the dissensoftware.com domain. > > I very rarely bother responding to challenge/response systems, especially > those from irresponsible companies. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
And the output from smpout and smprpt > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Binyamin Dissen > Sent: Thursday, June 11, 2020 10:57 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMPe Apply not working > > Show the APPLY statement. > > On Thu, 11 Jun 2020 12:27:00 -0500 Bill Giannelli > wrote: > > :>GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF > OEMPP.DB2.V12R02M0.SMPPTS1 FOR > :>GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF > OEMPP.DB2.V12R02M0.SMPPTS2 FOR > :>GIM24801S ** NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE > APPLY COMMAND. > :>GIM59606IDEQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF > OEMPP.DB2.V12R02M0.GLOBAL.C > :>GIM59607IDEQ WAS SUCCESSFUL FOR SHARED USE OF > OEMPP.DB2.V12R02M0.SMPPTS FOR > :> > :>-- > :>For IBM-MAIN subscribe / signoff / archive access instructions, :>send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > -- > Binyamin Dissen > https://urldefense.com/v3/__http://www.dissensoftware.com__;!!JmPEgB > Y0HMszNaDT!_6uhGc5oLyFkX1gFM7UkUTszrVtcoM27lzV1NlHNZT4lVHciRQy > wMjC6ICRdqw$ > > Director, Dissen Software, Bar & Grill - Israel > > > Should you use the mailblocks package and expect a response from me, you > should preauthorize the dissensoftware.com domain. > > I very rarely bother responding to challenge/response systems, especially > those from irresponsible companies. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
Show the APPLY statement. On Thu, 11 Jun 2020 12:27:00 -0500 Bill Giannelli wrote: :>GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS1 FOR :>GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS2 FOR :>GIM24801S ** NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE APPLY COMMAND. :>GIM59606IDEQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF OEMPP.DB2.V12R02M0.GLOBAL.C :>GIM59607IDEQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS FOR :> :>-- :>For IBM-MAIN subscribe / signoff / archive access instructions, :>send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Binyamin Dissen http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
Maybe the Zone is set to an incorrect Zone. (i.e SET BDY(TZONE).) On 2020-06-11 13:17, Bill Giannelli wrote: I ran a GIMSUP download, unpack, receive which ran clean. I see the received ptfs in a LIST NOAPPLY. But when I run theAPPLY I get "NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE APPLY". What could I be doing wrong? thanks Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN . -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS1 FOR GIM59603IENQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS2 FOR GIM24801S ** NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE APPLY COMMAND. GIM59606IDEQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF OEMPP.DB2.V12R02M0.GLOBAL.C GIM59607IDEQ WAS SUCCESSFUL FOR SHARED USE OF OEMPP.DB2.V12R02M0.SMPPTS FOR -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMPe Apply not working
Show us the output. Possible there are some control cards that are needed or the PTFs do not match the SREL or FIMDs in your global zone. But the GIM Messages would be very helpful to see Lizette -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Thursday, June 11, 2020 10:18 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMPe Apply not working I ran a GIMSUP download, unpack, receive which ran clean. I see the received ptfs in a LIST NOAPPLY. But when I run theAPPLY I get "NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE APPLY". What could I be doing wrong? thanks Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
