Re: Dirmaint feature is disabled
Yes, that is correct. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of sunny...@wcb.ab.ca Sent: Tuesday, April 28, 2009 7:22 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Dirmaint feature is disabled Thanks David Wakser and Dave Jones. My Dirmain starts to run again! :) I rememberd last time I did use cf2 ipl VM does that mean: If I try shutdown reip command, the system will still use cf2 instead of cf1 ? Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca Dave Jones Sent by: The IBM z/VM Operating System 04/28/2009 04:44 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Dirmaint feature is disabled Are you sure the CPPARM disk you are reIPLing from is the one that holds the updated SYSTEM CONFIG file? sunny...@wcb.ab.ca wrote: > > I use service dirm enable > dir2prod sam 5vmdir40 > dirr2prod access_new 5VMDIR40 dirm > change config files > dir2prod prod 5vmdir40 dirm > logoff > log on Dirmaint dvhbegin > > Just now I did > service dirm enable --- which can update system config. > shutdown reipl > > logon dirmaint > > > PRODUCT: > IBM Directory Maintenance Facility for z/VM (DirMaint) > 5741-A05 (C) Copyright IBM Corporation 1979, 2008. > Function Level 540 Service Level 0901. > DMSACC724I 155 replaces A (191) > DMSACC723I X (01DE) R/W - OS > > DVHPRO2008I ROLE = DIRMAINT > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. > > DIRMAINT VMPROD2. - 2009/04/28; T=0.01/0.01 16:25:59 > > q product > > Product StateDescription > > 5VMDIR40 Disabled 00/00/00.00:00:00.$BASEDDR DIRECTORY MAINTENANCE FL > 540 > 5VMPTK40 Disabled 00/00/00.00:00:00.$BASEDDR PERFORMANCE TOOLKIT FOR VM > > 5VMRAC40 Disabled 00/00/00.00:00:00.$BASEDDR RACF for VM > > 5VMRSC40 Disabled 00/00/00.00:00:00.$BASEDDR RSCS Networking Version 5 > Release 4 > Modification 0 > > > > > Sunny Hu > I. M. Technical Services > W.C.B. Alberta > (780) 498-4739 > sunny...@wcb.ab.ca > > > *Dave Jones * > Sent by: The IBM z/VM Operating System > > 04/28/2009 04:09 PM > Please respond to > The IBM z/VM Operating System > > > > To > IBMVM@LISTSERV.UARK.EDU > cc > > Subject > Re: Dirmaint feature is disabled > > > > > > > > > Hi, Sunny. > > sunny...@wcb.ab.ca wrote: > > > > I need help. > > You've come to the right spot, then:-) > > >I moved zM V5.4 to the first level. > > Turn the Dirmaint on. It works well at first. > > Then start to set TCPIP stack. > > But after I shutdown reipl > > I got > > DVHPRO2008I ROLE = DATAMOVE > > DVHPRO2008I ROLE = DATAMOVE > > DVHPRO2008I ROLE = DIRMAINT > > DVHPRO2008I ROLE = DIRMAINT > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > > > [snip of a lot of error messages] > > > > Ready; T=0.01/0.01 15:57:41 > > > > > > What happen? How to do the troubleshooting? > > > > Please help me! > > My first guess would be that you enabled DIRMAINT by hand using the SET > PRODUCT comamnd. That does not survive a system shutdown and re-ipl. > Update the SYSTEM CONFIG file to enable DIRAMINT each time the system > starts up. > > > -- > Dave Jones > V/Soft > www.vsoft-software.com > Houston, TX > 281.578.7544 > > > Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. > > This message is intended only for the addressee. It may contain > privileged or confidential information. Any unauthorized disclosure is > strictly prohibited. If you have received this message in error, please > notify us immediately so that we may correct our internal records. > Please then delete the original email. Thank you. (Sent by Webgate2) > -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544 Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If
Re: Dirmaint feature is disabled
Thanks David Wakser and Dave Jones. My Dirmain starts to run again! :) I rememberd last time I did use cf2 ipl VM does that mean: If I try shutdown reip command, the system will still use cf2 instead of cf1 ? Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca Dave Jones Sent by: The IBM z/VM Operating System 04/28/2009 04:44 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Dirmaint feature is disabled Are you sure the CPPARM disk you are reIPLing from is the one that holds the updated SYSTEM CONFIG file? sunny...@wcb.ab.ca wrote: > > I use service dirm enable > dir2prod sam 5vmdir40 > dirr2prod access_new 5VMDIR40 dirm > change config files > dir2prod prod 5vmdir40 dirm > logoff > log on Dirmaint dvhbegin > > Just now I did > service dirm enable --- which can update system config. > shutdown reipl > > logon dirmaint > > > PRODUCT: > IBM Directory Maintenance Facility for z/VM (DirMaint) > 5741-A05 (C) Copyright IBM Corporation 1979, 2008. > Function Level 540 Service Level 0901. > DMSACC724I 155 replaces A (191) > DMSACC723I X (01DE) R/W - OS > > DVHPRO2008I ROLE = DIRMAINT > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. > > DIRMAINT VMPROD2. - 2009/04/28; T=0.01/0.01 16:25:59 > > q product > > Product StateDescription > > 5VMDIR40 Disabled 00/00/00.00:00:00.$BASEDDR DIRECTORY MAINTENANCE FL > 540 > 5VMPTK40 Disabled 00/00/00.00:00:00.$BASEDDR PERFORMANCE TOOLKIT FOR VM > > 5VMRAC40 Disabled 00/00/00.00:00:00.$BASEDDR RACF for VM > > 5VMRSC40 Disabled 00/00/00.00:00:00.$BASEDDR RSCS Networking Version 5 > Release 4 > Modification 0 > > > > > Sunny Hu > I. M. Technical Services > W.C.B. Alberta > (780) 498-4739 > sunny...@wcb.ab.ca > > > *Dave Jones * > Sent by: The IBM z/VM Operating System > > 04/28/2009 04:09 PM > Please respond to > The IBM z/VM Operating System > > > > To >IBMVM@LISTSERV.UARK.EDU > cc > > Subject >Re: Dirmaint feature is disabled > > > > > > > > > Hi, Sunny. > > sunny...@wcb.ab.ca wrote: > > > > I need help. > > You've come to the right spot, then:-) > > >I moved zM V5.4 to the first level. > > Turn the Dirmaint on. It works well at first. > > Then start to set TCPIP stack. > > But after I shutdown reipl > > I got > > DVHPRO2008I ROLE = DATAMOVE > > DVHPRO2008I ROLE = DATAMOVE > > DVHPRO2008I ROLE = DIRMAINT > > DVHPRO2008I ROLE = DIRMAINT > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > > > [snip of a lot of error messages] > > > > Ready; T=0.01/0.01 15:57:41 > > > > > > What happen? How to do the troubleshooting? > > > > Please help me! > > My first guess would be that you enabled DIRMAINT by hand using the SET > PRODUCT comamnd. That does not survive a system shutdown and re-ipl. > Update the SYSTEM CONFIG file to enable DIRAMINT each time the system > starts up. > > > -- > Dave Jones > V/Soft > www.vsoft-software.com > Houston, TX > 281.578.7544 > > > Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. > > This message is intended only for the addressee. It may contain > privileged or confidential information. Any unauthorized disclosure is > strictly prohibited. If you have received this message in error, please > notify us immediately so that we may correct our internal records. > Please then delete the original email. Thank you. (Sent by Webgate2) > -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544 Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate2)
Re: Dirmaint feature is disabled
Are you sure the CPPARM disk you are reIPLing from is the one that holds the updated SYSTEM CONFIG file? sunny...@wcb.ab.ca wrote: I use service dirm enable dir2prod sam 5vmdir40 dirr2prod access_new 5VMDIR40 dirm change config files dir2prod prod 5vmdir40 dirm logoff log on Dirmaint dvhbegin Just now I did service dirm enable --- which can update system config. shutdown reipl logon dirmaint PRODUCT: IBM Directory Maintenance Facility for z/VM (DirMaint) 5741-A05 (C) Copyright IBM Corporation 1979, 2008. Function Level 540 Service Level 0901. DMSACC724I 155 replaces A (191) DMSACC723I X (01DE) R/W - OS DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DIRMAINT VMPROD2. - 2009/04/28; T=0.01/0.01 16:25:59 q product Product StateDescription 5VMDIR40 Disabled 00/00/00.00:00:00.$BASEDDR DIRECTORY MAINTENANCE FL 540 5VMPTK40 Disabled 00/00/00.00:00:00.$BASEDDR PERFORMANCE TOOLKIT FOR VM 5VMRAC40 Disabled 00/00/00.00:00:00.$BASEDDR RACF for VM 5VMRSC40 Disabled 00/00/00.00:00:00.$BASEDDR RSCS Networking Version 5 Release 4 Modification 0 Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca *Dave Jones * Sent by: The IBM z/VM Operating System 04/28/2009 04:09 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Dirmaint feature is disabled Hi, Sunny. sunny...@wcb.ab.ca wrote: > > I need help. You've come to the right spot, then:-) >I moved zM V5.4 to the first level. > Turn the Dirmaint on. It works well at first. > Then start to set TCPIP stack. > But after I shutdown reipl > I got > DVHPRO2008I ROLE = DATAMOVE > DVHPRO2008I ROLE = DATAMOVE > DVHPRO2008I ROLE = DIRMAINT > DVHPRO2008I ROLE = DIRMAINT > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. [snip of a lot of error messages] > > Ready; T=0.01/0.01 15:57:41 > > > What happen? How to do the troubleshooting? > > Please help me! My first guess would be that you enabled DIRMAINT by hand using the SET PRODUCT comamnd. That does not survive a system shutdown and re-ipl. Update the SYSTEM CONFIG file to enable DIRAMINT each time the system starts up. -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544 Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate2) -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544
Re: Dirmaint feature is disabled
Is it possible that you are updating the wrong SYSTEM CONFIG file? After an IPL, before doing anything else, issue CP QUERY PRODUCT and post the results. David Wakser From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of sunny...@wcb.ab.ca Sent: Tuesday, April 28, 2009 6:36 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Dirmaint feature is disabled I use service dirm enable dir2prod sam 5vmdir40 dirr2prod access_new 5VMDIR40 dirm change config files dir2prod prod 5vmdir40 dirm logoff log on Dirmaint dvhbegin Just now I did service dirm enable --- which can update system config. shutdown reipl logon dirmaint PRODUCT: IBM Directory Maintenance Facility for z/VM (DirMaint) 5741-A05 (C) Copyright IBM Corporation 1979, 2008. Function Level 540 Service Level 0901. DMSACC724I 155 replaces A (191) DMSACC723I X (01DE) R/W - OS DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DIRMAINT VMPROD2. - 2009/04/28; T=0.01/0.01 16:25:59 q product Product StateDescription 5VMDIR40 Disabled 00/00/00.00:00:00.$BASEDDR DIRECTORY MAINTENANCE FL 540 5VMPTK40 Disabled 00/00/00.00:00:00.$BASEDDR PERFORMANCE TOOLKIT FOR VM 5VMRAC40 Disabled 00/00/00.00:00:00.$BASEDDR RACF for VM 5VMRSC40 Disabled 00/00/00.00:00:00.$BASEDDR RSCS Networking Version 5 Release 4 Modification 0 Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca Dave Jones Sent by: The IBM z/VM Operating System 04/28/2009 04:09 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Dirmaint feature is disabled Hi, Sunny. sunny...@wcb.ab.ca wrote: > > I need help. You've come to the right spot, then:-) >I moved zM V5.4 to the first level. > Turn the Dirmaint on. It works well at first. > Then start to set TCPIP stack. > But after I shutdown reipl > I got > DVHPRO2008I ROLE = DATAMOVE > DVHPRO2008I ROLE = DATAMOVE > DVHPRO2008I ROLE = DIRMAINT > DVHPRO2008I ROLE = DIRMAINT > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. [snip of a lot of error messages] > > Ready; T=0.01/0.01 15:57:41 > > > What happen? How to do the troubleshooting? > > Please help me! My first guess would be that you enabled DIRMAINT by hand using the SET PRODUCT comamnd. That does not survive a system shutdown and re-ipl. Update the SYSTEM CONFIG file to enable DIRAMINT each time the system starts up. -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544 Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate2) Confidentiality Note: This e-mail, including any attachment to it, may contain material that is confidential, proprietary, privileged and/or "Protected Health Information," within the meaning of the regulations under the Health Insurance Portability & Accountability Act as amended. If it is not clear that you are the intended recipient, you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this e-mail, including any attachment to it, is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.
Re: Dirmaint feature is disabled
I use service dirm enable dir2prod sam 5vmdir40 dirr2prod access_new 5VMDIR40 dirm change config files dir2prod prod 5vmdir40 dirm logoff log on Dirmaint dvhbegin Just now I did service dirm enable --- which can update system config. shutdown reipl logon dirmaint PRODUCT: IBM Directory Maintenance Facility for z/VM (DirMaint) 5741-A05 (C) Copyright IBM Corporation 1979, 2008. Function Level 540 Service Level 0901. DMSACC724I 155 replaces A (191) DMSACC723I X (01DE) R/W - OS DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DIRMAINT VMPROD2. - 2009/04/28; T=0.01/0.01 16:25:59 q product Product StateDescription 5VMDIR40 Disabled 00/00/00.00:00:00.$BASEDDR DIRECTORY MAINTENANCE FL 540 5VMPTK40 Disabled 00/00/00.00:00:00.$BASEDDR PERFORMANCE TOOLKIT FOR VM 5VMRAC40 Disabled 00/00/00.00:00:00.$BASEDDR RACF for VM 5VMRSC40 Disabled 00/00/00.00:00:00.$BASEDDR RSCS Networking Version 5 Release 4 Modification 0 Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca Dave Jones Sent by: The IBM z/VM Operating System 04/28/2009 04:09 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Dirmaint feature is disabled Hi, Sunny. sunny...@wcb.ab.ca wrote: > > I need help. You've come to the right spot, then:-) >I moved zM V5.4 to the first level. > Turn the Dirmaint on. It works well at first. > Then start to set TCPIP stack. > But after I shutdown reipl > I got > DVHPRO2008I ROLE = DATAMOVE > DVHPRO2008I ROLE = DATAMOVE > DVHPRO2008I ROLE = DIRMAINT > DVHPRO2008I ROLE = DIRMAINT > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. > DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. [snip of a lot of error messages] > > Ready; T=0.01/0.01 15:57:41 > > > What happen? How to do the troubleshooting? > > Please help me! My first guess would be that you enabled DIRMAINT by hand using the SET PRODUCT comamnd. That does not survive a system shutdown and re-ipl. Update the SYSTEM CONFIG file to enable DIRAMINT each time the system starts up. -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544 Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate2)
Re: Dirmaint feature is disabled
Hi, Sunny. sunny...@wcb.ab.ca wrote: I need help. You've come to the right spot, then:-) I moved zM V5.4 to the first level. Turn the Dirmaint on. It works well at first. Then start to set TCPIP stack. But after I shutdown reipl I got DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DIRMAINT DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. [snip of a lot of error messages] Ready; T=0.01/0.01 15:57:41 What happen? How to do the troubleshooting? Please help me! My first guess would be that you enabled DIRMAINT by hand using the SET PRODUCT comamnd. That does not survive a system shutdown and re-ipl. Update the SYSTEM CONFIG file to enable DIRAMINT each time the system starts up. -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544
Re: Dirmaint feature is disabled
What does the CP QUERY PRODUCT command show? sunny...@wcb.ab.ca wrote: My system config 00270 /**/ 00271 /*PRODUCT ENABLE/DISABLE INFORMATION */ 00272 /**/ 00273 00274 PRODUCT PRODID 5VMRSC40 STATE DISABLED DESCRIPTION '00/00/00.00:00:00.$BAS EDDR R 00275 SCS Networking Version 5 Release 4 Modification 0' 00276 00277 PRODUCT PRODID 5VMDIR40 STATE ENABLED DESCRIPTION '00/00/00.00:00:00.$BASE DDR D 00278 IRECTORY MAINTENANCE FL 540' 00279 00280 PRODUCT PRODID 5VMRAC40 STATE DISABLED DESCRIPTION '00/00/00.00:00:00.$BAS EDDR R 00281 ACF for VM' 00282 00283 PRODUCT PRODID 5VMPTK40 STATE DISABLED DESCRIPTION '00/00/00.00:00:00.$BAS EDDR P 00284 ERFORMANCE TOOLKIT FOR VM' 00285 00286 PRODUCT PRODID 5VMDIR40 STATE ENABLED DESCRIPTION '04/28/09.14:23:34.MAINT In 00287 stall/service DirMaint using minidisk' Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca *"Wakser, David" * Sent by: The IBM z/VM Operating System 04/28/2009 04:07 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Dirmaint feature is disabled Did you forget to ENABLE the DIRMAINT entry in the system config? David Wakser *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *sunny...@wcb.ab.ca* Sent:* Tuesday, April 28, 2009 6:04 PM* To:* ib...@listserv.uark.edu* Subject:* Dirmaint feature is disabled I need help. I moved zM V5.4 to the first level. Turn the Dirmaint on. It works well at first. Then start to set TCPIP stack. But after I shutdown reipl I got DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DIRMAINT DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DIRMAINT USERS = 11 DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DATAMOVE USERS = 10 15:42:17 USER DSC LOGOFF AS TCPIPUSERS = 9 15:42:17 HCPSWU2830I VSWITCH SYSTEM VSW1 status is ready. 15:42:17 HCPSWU2830I DTCVSW2 is VSWITCH controller for device 0910.P00. 15:42:20 * MSG FROM EREP: HCPRET8056I RECORDING RETRIEVAL DISK 90% FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8057E RECORDING RETRIEVAL DISK FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8065I RECORDING RETRIEVAL EREP TERMINATED , USER EREP 15:43:16 HCPSWU2830I DTCVSW1 is VSWITCH controller for backup device 0930.P00. 15:57:23 USER DSC LOGOFF AS EREP USERS = 8 FORCED BY SYSTEM DMSACP060E File not found; filemode D(192) will not be accessed Ready; T=0.01/0.01 15:57:41 What happen? How to do the troubleshooting? Please help me! Sunny Hu This message is intended only f
Re: Dirmaint feature is disabled
My system config 00270 /**/ 00271 /*PRODUCT ENABLE/DISABLE INFORMATION */ 00272 /**/ 00273 00274 PRODUCT PRODID 5VMRSC40 STATE DISABLED DESCRIPTION '00/00/00.00:00:00.$BAS EDDR R 00275 SCS Networking Version 5 Release 4 Modification 0' 00276 00277 PRODUCT PRODID 5VMDIR40 STATE ENABLED DESCRIPTION '00/00/00.00:00:00.$BASE DDR D 00278 IRECTORY MAINTENANCE FL 540' 00279 00280 PRODUCT PRODID 5VMRAC40 STATE DISABLED DESCRIPTION '00/00/00.00:00:00.$BAS EDDR R 00281 ACF for VM' 00282 00283 PRODUCT PRODID 5VMPTK40 STATE DISABLED DESCRIPTION '00/00/00.00:00:00.$BAS EDDR P 00284 ERFORMANCE TOOLKIT FOR VM' 00285 00286 PRODUCT PRODID 5VMDIR40 STATE ENABLED DESCRIPTION '04/28/09.14:23:34.MAINT In 00287 stall/service DirMaint using minidisk' Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca "Wakser, David" Sent by: The IBM z/VM Operating System 04/28/2009 04:07 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Dirmaint feature is disabled Did you forget to ENABLE the DIRMAINT entry in the system config? David Wakser From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of sunny...@wcb.ab.ca Sent: Tuesday, April 28, 2009 6:04 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Dirmaint feature is disabled I need help. I moved zM V5.4 to the first level. Turn the Dirmaint on. It works well at first. Then start to set TCPIP stack. But after I shutdown reipl I got DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DIRMAINT DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DIRMAINT USERS = 11 DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DATAMOVE USERS = 10 15:42:17 USER DSC LOGOFF AS TCPIPUSERS = 9 15:42:17 HCPSWU2830I VSWITCH SYSTEM VSW1 status is ready. 15:42:17 HCPSWU2830I DTCVSW2 is VSWITCH controller for device 0910.P00. 15:42:20 * MSG FROM EREP: HCPRET8056I RECORDING RETRIEVAL DISK 90% FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8057E RECORDING RETRIEVAL DISK FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8065I RECORDING RETRIEVAL EREP TERMINATED , USER EREP 15:43:16 HCPSWU2830I DTCVSW1 is VSWITCH controller for backup device 0930.P00. 15:57:23 USER DSC LOGOFF AS EREP USERS = 8 FORCED BY SYSTEM DMSACP060E File not found; filemode D(192) will not be accessed Ready; T=0.01/0.01 15:57:41 What happen? How to do the troubleshooting? Please help me! Sunny Hu This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate1) Confidentiality Note: This e-mail, including any attachment to it, may contain material that is confidential, proprietary, privileged and/or "Protected Health Information," within the meaning of the regulations under the Health Insurance Portability & Accountability Act as amended. If it is not clear that you are the intended recipient, you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this e-mail, including any attachment to it, is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you. Scanned by WCB Webgate2 AntiSpam/AntiVirus email gateway. This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate1)
Re: Dirmaint feature is disabled
Did you forget to ENABLE the DIRMAINT entry in the system config? David Wakser From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of sunny...@wcb.ab.ca Sent: Tuesday, April 28, 2009 6:04 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Dirmaint feature is disabled I need help. I moved zM V5.4 to the first level. Turn the Dirmaint on. It works well at first. Then start to set TCPIP stack. But after I shutdown reipl I got DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DIRMAINT DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DIRMAINT USERS = 11 DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DATAMOVE USERS = 10 15:42:17 USER DSC LOGOFF AS TCPIPUSERS = 9 15:42:17 HCPSWU2830I VSWITCH SYSTEM VSW1 status is ready. 15:42:17 HCPSWU2830I DTCVSW2 is VSWITCH controller for device 0910.P00. 15:42:20 * MSG FROM EREP: HCPRET8056I RECORDING RETRIEVAL DISK 90% FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8057E RECORDING RETRIEVAL DISK FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8065I RECORDING RETRIEVAL EREP TERMINATED , USER EREP 15:43:16 HCPSWU2830I DTCVSW1 is VSWITCH controller for backup device 0930.P00. 15:57:23 USER DSC LOGOFF AS EREP USERS = 8 FORCED BY SYSTEM DMSACP060E File not found; filemode D(192) will not be accessed Ready; T=0.01/0.01 15:57:41 What happen? How to do the troubleshooting? Please help me! Sunny Hu This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate1) Confidentiality Note: This e-mail, including any attachment to it, may contain material that is confidential, proprietary, privileged and/or "Protected Health Information," within the meaning of the regulations under the Health Insurance Portability & Accountability Act as amended. If it is not clear that you are the intended recipient, you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this e-mail, including any attachment to it, is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.
Re: Dirmaint feature is disabled
Is DIRMAINT enabled in the SYSTEM CONFIG file you IPL’ed with? Thank you, Scott From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of sunny...@wcb.ab.ca Sent: Tuesday, April 28, 2009 5:04 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Dirmaint feature is disabled I need help. I moved zM V5.4 to the first level. Turn the Dirmaint on. It works well at first. Then start to set TCPIP stack. But after I shutdown reipl I got DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DIRMAINT DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DIRMAINT USERS = 11 DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DATAMOVE USERS = 10 15:42:17 USER DSC LOGOFF AS TCPIPUSERS = 9 15:42:17 HCPSWU2830I VSWITCH SYSTEM VSW1 status is ready. 15:42:17 HCPSWU2830I DTCVSW2 is VSWITCH controller for device 0910.P00. 15:42:20 * MSG FROM EREP: HCPRET8056I RECORDING RETRIEVAL DISK 90% FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8057E RECORDING RETRIEVAL DISK FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8065I RECORDING RETRIEVAL EREP TERMINATED , USER EREP 15:43:16 HCPSWU2830I DTCVSW1 is VSWITCH controller for backup device 0930.P00. 15:57:23 USER DSC LOGOFF AS EREP USERS = 8 FORCED BY SYSTEM DMSACP060E File not found; filemode D(192) will not be accessed Ready; T=0.01/0.01 15:57:41 What happen? How to do the troubleshooting? Please help me! Sunny Hu This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate1) Confidentiality Note: This e-mail, including any attachment to it, may contain material that is confidential, proprietary, privileged and/or "Protected Health Information," within the meaning of the regulations under the Health Insurance Portability & Accountability Act as amended. If it is not clear that you are the intended recipient, you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this e-mail, including any attachment to it, is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.
Dirmaint feature is disabled
I need help. I moved zM V5.4 to the first level. Turn the Dirmaint on. It works well at first. Then start to set TCPIP stack. But after I shutdown reipl I got DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DATAMOVE DVHPRO2008I ROLE = DIRMAINT DVHPRO2008I ROLE = DIRMAINT DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2031T THE DIRMAINT FEATURE IS DISABLED. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DIRMAINT; RC = 4. DVHPRO2003T INITIALIZATION HAS FAILED FOR DATAMOVE; RC = 4. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DIRMAINT USERS = 11 DVHPRO2004A PLEASE NOTIFY THE OWNER. 15:42:17 USER DSC LOGOFF AS DATAMOVE USERS = 10 15:42:17 USER DSC LOGOFF AS TCPIPUSERS = 9 15:42:17 HCPSWU2830I VSWITCH SYSTEM VSW1 status is ready. 15:42:17 HCPSWU2830I DTCVSW2 is VSWITCH controller for device 0910.P00. 15:42:20 * MSG FROM EREP: HCPRET8056I RECORDING RETRIEVAL DISK 90% FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8057E RECORDING RETRIEVAL DISK FULL, USER EREP 15:42:23 * MSG FROM EREP: HCPRET8065I RECORDING RETRIEVAL EREP TERMINATED , USER EREP 15:43:16 HCPSWU2830I DTCVSW1 is VSWITCH controller for backup device 0930.P00. 15:57:23 USER DSC LOGOFF AS EREP USERS = 8 FORCED BY SYSTEM DMSACP060E File not found; filemode D(192) will not be accessed Ready; T=0.01/0.01 15:57:41 What happen? How to do the troubleshooting? Please help me! Sunny Hu This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate1)
