[ilugd] Fwd: Re: [Indlinux-group] Meeting Details (was Ubuntu Indian Local Community Team)
Hi, Forwarding a message giving details of a IRC meeting tomorrow (Sun) to plan for the meeting with the Ubunut council. Regards, Gora --- Baishampayan Ghose <[EMAIL PROTECTED]> wrote: > From: Baishampayan Ghose <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Subject: Re: [Indlinux-group] Meeting Details (was Ubuntu Indian > Local Community > Team) > Date: Sat, 04 Mar 2006 21:43:29 +0530 > > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Hello everybody, > After discussion with some of us on IRC, we have finally decided the > date/time of the first meeting of the Ubuntu Indian Local Community > team. Details are as below -- > * Date - Sunday March 5, 2006 (tomorrow) > * Time - 15:00 Hrs IST > * Venue - #ubuntu-in @ irc.freenode.net > * Wiki - https://wiki.ubuntu.com/IndianTeam > The agenda and other details are listed in the team wiki, please feel > free to update the same. > Please try to be present at the meeting to share your views, and do > forward this mail to other [G]LUG lists if possible. > Regards, > BG __ Yahoo! India Matrimony: Find your partner now. Go to http://yahoo.shaadi.com ___ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
Re: [ilugd] Error is Using ufraw
--- "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > I apt-get installed ufraw, a tool to process raw images created using > a digital camera. > > It worked fine once - > > after that i get the following error message > ufraw > > (ufraw:16083): Gdk-WARNING **: locale not supported by Xlib > > (ufraw:16083): Gdk-WARNING **: cannot set locale modifiers The above two messages are irrelevant, and should not affect the functioning of the program. What is probably happening is that you are using some Indian language locale that is not supported by X. You should be able to get rid of these by using the English language locale, e.g., with env LANG=en_US ufraw > *Floating point exception* > > > When I use the command line to open an image using ufraw it accesses > the > image and when i do a save it just goes blink and i get the > "floating point exception message" > > what should I do to figure out whats wrong. That sounds like a bug in the program. You should file a bug report. They sill probably need some information from you that could be provided by running ufraw with strace, strace ufraw The messages at the end will tell you where ufraw is crashing. It is difficult to guess why it was working earlier, and does not now. Could have to do with the image file format, size of the image, etc. Another possibility is some mis-configuration. You could try removing any configuration files, maybe saved as ~/.ufraw*, and trying again. Regards, Gora __ Yahoo! India Matrimony: Find your partner now. Go to http://yahoo.shaadi.com ___ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
Re: [ilugd] [OT] Emails to SMS alerts
Yashpal Nagar wrote: > Karanbir Singh wrote: > >>> why not just hook up an old mobile phone to the Monitoring system and >>> use that ? >>> >>> doing alerts over the network ( like email / URL / webservice etc ) >>> brings a massive disadvantage : that the system might be trying to >>> complain about the same network being out! >>> >>> >>> >> Shiv, >> >> my point was that such a sms_gateway is of no use, if the network access >> to the sms_gateway itself is going to be down! >> >> and, err... TopPosting sucks.. >> >> - K >> >> > As a matter of the fact which i believe is one need to use SMS gateway > when you have bulk of messages to be broadcast, for a fewer broadcats a > mobile with a GSM modem should do.. mobile phone = gsm modem. it has ( || should ?) everything you need for both outbound and inbound sms. I have my nokia 6210 hooked up in a manner that i can remote reboot machines ( including powercycle the router / gateway if required ). > Secondly if i am not wrong mobile will do a serial broadcast and a SMS > gateway can render SMSs almost immediately to all mobile users .? ( I presume this is where we decide this conversation to be no longer relevant to the OP ) -- Karanbir Singh : http://www.karan.org/ : [EMAIL PROTECTED] ___ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
[ilugd] Xorg standby is not working
Hi mailing list, I'm having a desktop user and having problem with X-windows not going into standby. I'm using Fedora Core 4 (AMD64) with Xorg (v. 6.8.2). My hardware configuration is: CPU: Intel Pentium 4 630 Mobo: Intel D945GNTL. Graphics Card: Intel GMA 950 (Onboard) Memory: 1 GiB Monitor: LG Studioworks 452V (Dec. 2000) supports DPMS (previously ran Windows with it). -- xorg.conf (comments stripped) -- Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice"Mouse0" "CorePointer" InputDevice"Keyboard0" "CoreKeyboard" Option "StandbyTime" "10" Option "SuspendTime" "20" Option "OffTime" "30" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/CID" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID" EndSection Section "Module" Load "bitmap" Load "dbe" Load "ddc" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "type1" Load "vbe" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName"Unknown monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" VendorName "Intel Corp." BoardName "VESA driver (generic)" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor"Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 16 Modes"1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes"1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group0 Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection -- end of dump -- I'm using "vesa" driver because driver for my 945G is not available. Below is the output of xset -q. xset -q Keyboard Control: auto repeat: onkey click percent: 0LED mask: auto repeat delay: 250repeat rate: 30 auto repeating keys: 00ffdbbf fadfffdfffdfe5ef bell percent: 50bell pitch: 400bell duration: 100 Pointer Control: acceleration: 20/10threshold: 4 Screen Saver: prefer blanking: yesallow exposures: yes timeout: 0cycle: 600 Colors: default colormap: 0x20BlackPixel: 0WhitePixel: 16777215 Font Path: unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi Bug Mode: compatibility mode is disabled DPMS (Energy Star): Standby: 600Suspend: 1980Off: 3600 DPMS is Enabled Monitor is On File paths: Config file: /etc/X11/xorg.conf Modules path: /usr/X11R6/lib64/modules Log file: /var/log/Xorg.0.log -- end of dump -- With this configuration, is it possible to go into standby ? I've tried doing "xset dpms force " "standby"|"suspend"|"off", but nothing happened. Thanx in advance, Ashish Shukla alias Wah Java !! P.S. I've posted this (and another one also) as mail to ilugd@lists.linux-delhi.org but message not appeared in the forum nor the digest to which I've subscribed. -- Ashish Shukla "Wah Java !!" Supercomputers are for people too rich and too stupid to design efficient algorithms -- Steven Skiena, Department of Computer Science, SUNY Stony Brook _ Sent from Mail2Forum at http://www.lug-delhi.org/forums
Re: [ilugd] plz help in cd writing with linux
ankit walia wrote: >hi all, >i hv recently started using linux. >i hv used cd creater from go menu which opens burn/// folder but when i put >content to burn then it shows some message n not burn. >plz help >___ > > You need to know first where on which device has put the cd writing device 1. Go to xerm/konxole or Press Ctrl+Alt+F1, adn enter the CLI mode anyway you like. 2. Login in the console 4. Since you most probably have an IDE cd writer #dmesg |grep CD this will tell you which device is your CD/DVD writer. 5. Open K3b. Go To Settings and Select K3b Setup. 6. Enter the root password 7. Set the device up in the device options 8. If you have a scsi cd/DVD writer 9. run cdrecoed -scanbus 10. follow steps 5-8. Manpreet Singh Nehra ___ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
Re: [ilugd] plz help in cd writing with linux
Raj shekhar wrote: >in infinite wisdom ankit walia spoke thus on 03/01/06 23:47: > > >>hi all, >>i hv recently started using linux. >>i hv used cd creater from go menu which opens burn/// folder but when i put >>content to burn then it shows some message n not burn. >>plz help >> >> > >http://dtil.info/index.php/Multimedia_Part_1_-_Playing_and_Recording_Music#Recording_a_Data_CD_.28mp3_or_ogg.29 > > Expeccting another flamewar, juat little bit of head banging and cdrecord rocks. Manpreet Singh Nehra ___ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
[ilugd] Error is Using ufraw
Hi I apt-get installed ufraw, a tool to process raw images created using a digital camera. It worked fine once - after that i get the following error message ufraw (ufraw:16083): Gdk-WARNING **: locale not supported by Xlib (ufraw:16083): Gdk-WARNING **: cannot set locale modifiers *Floating point exception* When I use the command line to open an image using ufraw it accesses the image and when i do a save it just goes blink and i get the "floating point exception message" what should I do to figure out whats wrong. *** On another note for nikon digital camera users this is a cool tool to process the .nef (raw images) thanks ram ___ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
Re: [ilugd] Fwd: [Indlinux-group] Ubuntu Indian Local Community Team
Thankz Gora :) Tri-colors in the Ubuntu Logo look cool. Where can I get the log of the metting ? Regards, Jasbir ___ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
