Bhaskar Dutta wrote:
On Thursday 08 Jul 2004 1:59 pm, AJ Anupam Jain said:
AJ I'm having problems using the handycam on Mandrake 10.0. With other
USB AJ storage devices, eg. when using a USB memory stick, an HDD icon pops
up as AJ soon as I plug it in my USB slot. But nothing happens with the
camcorder. AJ
AJ usb 1-1: new full speed USB device using address 2
AJ drivers/usb/core/usb.c: registered new driver hiddev
AJ drivers/usb/core/usb.c: registered new driver hid
AJ drivers/usb/input/hid-core.c: v2.0:USB HID core driver
AJ usb 1-1.4: new full speed USB device using address 3
AJ usb 1-1.4: device not accepting address 3, error -110
AJ usb 1-1.4: new full speed USB device using address 4
AJ usb 1-1.4: device not accepting address 4, error -110
AJ usb 1-1.4: new full speed USB device using address 5
AJ usb 1-1.4: device not accepting address 5, error -110
AJ usb 1-1.4: new full speed USB device using address 6
AJ usb 1-1.4: device not accepting address 6, error -110
usb hub driver is failing. seems to be an interrupt issue. check whether you
are actually getting interrupts from the device.
Umm... How do I do that?
you've given too less information.
which kernel?
which modules?
which motherboard?
what host controller?
lsusb output
cat /proc/interrupts
OK here goes..
Kernel = 2.6.3-4mdk
lsmod output
Module Size Used by
md5 3872 1
ipv6 232352 6
sg 38044 0
sr_mod 17060 0
i810 72032 18
lp 12200 0
maestro3 33832 1
soundcore 9248 2 maestro3
ac97_codec 17804 1 maestro3
af_packet 20520 0
hid53312 0
raw 7616 1
ide-floppy 18752 0
ide-tape 34864 0
ide-cd 40548 0
cdrom 37184 2 sr_mod,ide-cd
floppy 59444 0
nls_iso8859-1 3904 1
nls_cp850 4736 1
vfat 13760 1
fat45120 1 vfat
supermount 37876 1
intel-agp 17372 1
agpgart31016 3 intel-agp
ppa12296 0
parport_pc 32832 1
imm12360 0
scsi_mod 114744 4 sg,sr_mod,ppa,imm
parport38952 4 lp,ppa,parport_pc,imm
uhci-hcd 29104 0
usbcore99132 4 hid,uhci-hcd
rtc11576 0
ext3 110376 1
jbd54328 1 ext3
lsusb output
Bus 001 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub
Bus 001 Device 001: ID :
cat /proc/interrupts
CPU0
0: 945984 XT-PIC timer
1:479 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC Allegro
8: 1 XT-PIC rtc
11: 98 XT-PIC uhci_hcd
12: 38634 XT-PIC i8042
14: 75283 XT-PIC ide0
15: 8664 XT-PIC ide1
NMI: 0
LOC: 946033
ERR: 0
MIS: 0
usbview output
UHCI Host Controller
Manufacturer: Linux 2.6.3-4mdk uhci_hcd
Serial Number: :00:1f.2
Speed: 12Mb/s (full)
Number of Ports: 2
Bandwidth allocated: 11 / 900 (1%)
Total number of interrupt requests: 1
Total number of isochronous requests: 0
USB Version: 1.10
Device Class: 09(hub )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Config Number: 1
Number of Interfaces: 1
Attributes: 40
MaxPower Needed: 0mA
Interface Number: 0
Name: hub
Alternate Number: 0
Class: 09(hub )
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 2
Interval: 255ms
hub
Speed: 12Mb/s (full)
Number of Ports: 4
USB Version: 1.10
Device Class: 09(hub )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0451
Product Id: 2046
Revision Number: 1.25
Config Number: 1
Number of Interfaces: 1
Attributes: e0
MaxPower Needed: 0mA
Interface Number: 0
Name: hub
Alternate Number: 0
Class: 09(hub )
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 1
Interval: 255ms
Thanks in advance for any help
- AJ
___
ilugd mailinglist -- [EMAIL PROTECTED]
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at:
