[JAWS-Users] Re: installing Jaws Pro

[Rick Justice]

Jason,
If you have already paid for your SMA, for the pro version,
then just just re-authorize your ILM.
No need to un-install Jaws, the program that you downloaded is the same, 
it's the authorization that makes the difference.
HTH,
Richard Justice
- Original Message - 
From: "jason smith" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 11:30 PM
Subject: [JAWS-Users] installing Jaws Pro


Hi list,
as I mentioned a week or so ago, I was faced with having to upgrade my Jaws 
standard, to Jaws Pro, since my work are running Windows XP Pro. I could 
keep running my Jaws standard in 40 minute demo, but decided to avoid the 
hassle. I wonder why FS don't just sell Jaws Pro, since my Jaws dealer, said 
that there is no real difference between the two, apart from Pro running on 
more operating systems. I have also not long redone my Jaws standard SMA. I 
therefore, had to pay the difference between the standard and pro SMA. I 
haven't received my Jaws Pro CDs yet, despite ordering it a week ago. Will I 
need to uninstall my Jaws standard, in order to install Jaws pro? I already 
have Jaws 8.0 on my desktop. This is the Standard version. I assume that I 
will be getting Jaws 8.0 for the Pro version. Will I be able to have both 
versions of Jaws 8.0 installed at same time? Will I be able to tell the 
difference between the two icons if I do?
Thanks a lot
Jason



--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Voice Changes

[Kerryann Ifill]

Hi Rica,

I'm beginning to suspect its more of a overall system challenge that simply
a JFW one.
This evening, when I was using my eloquence synthiser ad tried to say all
with sappi the voice sounded rather distorted.
I might have picked up a virus somewhere, so I'm going to run the virus scan
and see what turns up in the wash!

Thanks loads and let me know if you have any other suggestions.

Kerry 

-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Rick Justice
Sent: Friday, March 16, 2007 7:31 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


Hi Kerryann,
If Jaws comes up talking when the computer boots, then it is running as a
service.
Unless, it is running from a shortcut  in the startup folder.
At any rate, if this is when you are experiencing the problem, try
unloading, and then re-loading Jaws, and try setting the voices again.
Doing this will cause Jaws to run as an application.
I have found in some instances, that Jaws will have a problem with sappi
voices when it is running as a service.
HTH,
Rick
- Original Message -
From: "Kerryann Ifill" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 7:28 PM
Subject: [JAWS-Users] Re: Voice Changes



Hi Ric,

Not totally sure how to answer your question.
All I can tell you is that JFW is running from system try. Does that help
any?

Kerry

-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Rick Justice
Sent: Friday, March 16, 2007 3:15 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


Hi Kerryann,
Do you know if Jaws is running as a service, or an application when this
happens?
Rick
- Original Message -
From: "Kerryann Ifill" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, March 15, 2007 8:00 PM
Subject: [JAWS-Users] Re: Voice Changes


Hi Marilyn,

Thanks, but its a little more complicated than that.  But trust me; I tried
that too!
I think Jaws has decided to go on a work slow campaign in protest!

Kerry

  _

From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Marilyn Walker
Sent: Thursday, March 15, 2007 12:27 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


This may be too simple, but after you set your voices, di you continue to
tab down and enter "Ok?"  marilyn













--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: skype help

[Rick Justice]

Patti,
Open the Jaws folder, hit S for settings, and when it opens, hit E for enu.
Pretty simple, huh?
HTH,

Richard Justice

- Original Message - 
From: "Patti" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 11:24 PM
Subject: [JAWS-Users] skype help


Hey Gang,
Could some one tell me where, is the edu folder in Jaws 5.1 at? We need to 
put some scripts in there.
thanks Patti
"If a man says something in the woods and there are no women there, is he 
still wrong?"




--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] installing Jaws Pro

[jason smith]

Hi list,
as I mentioned a week or so ago, I was faced with having to upgrade my Jaws 
standard, to Jaws Pro, since my work are running Windows XP Pro. I could keep 
running my Jaws standard in 40 minute demo, but decided to avoid the hassle. I 
wonder why FS don't just sell Jaws Pro, since my Jaws dealer, said that there 
is no real difference between the two, apart from Pro running on more operating 
systems. I have also not long redone my Jaws standard SMA. I therefore, had to 
pay the difference between the standard and pro SMA. I haven't received my Jaws 
Pro CDs yet, despite ordering it a week ago. Will I need to uninstall my Jaws 
standard, in order to install Jaws pro? I already have Jaws 8.0 on my desktop. 
This is the Standard version. I assume that I will be getting Jaws 8.0 for the 
Pro version. Will I be able to have both versions of Jaws 8.0 installed at same 
time? Will I be able to tell the difference between the two icons if I do?
Thanks a lot
Jason
--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] skype help

[Patti]

Hey Gang,
Could some one tell me where, is the edu folder in Jaws 5.1 at? We need to put 
some scripts in there.
thanks Patti 
"If a man says something in the woods and there are no women there, is he still 
wrong?"

--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Voice Changes

[Rick Justice]

Hi Kerryann,
If Jaws comes up talking when the computer boots, then it is running as a 
service.
Unless, it is running from a shortcut  in the startup folder.
At any rate, if this is when you are experiencing the problem, try 
unloading, and then re-loading Jaws,
and try setting the voices again.
Doing this will cause Jaws to run as an application.
I have found in some instances, that Jaws will have a problem with sappi 
voices when it is running as a service.
HTH,
Rick
- Original Message - 
From: "Kerryann Ifill" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 7:28 PM
Subject: [JAWS-Users] Re: Voice Changes



Hi Ric,

Not totally sure how to answer your question.
All I can tell you is that JFW is running from system try. Does that help
any?

Kerry

-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Rick Justice
Sent: Friday, March 16, 2007 3:15 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


Hi Kerryann,
Do you know if Jaws is running as a service, or an application when this
happens?
Rick
- Original Message -
From: "Kerryann Ifill" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, March 15, 2007 8:00 PM
Subject: [JAWS-Users] Re: Voice Changes


Hi Marilyn,

Thanks, but its a little more complicated than that.  But trust me; I tried
that too!
I think Jaws has decided to go on a work slow campaign in protest!

Kerry

  _

From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Marilyn Walker
Sent: Thursday, March 15, 2007 12:27 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


This may be too simple, but after you set your voices, di you continue to
tab down and enter "Ok?"  marilyn











--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Getting the Greaters Out

[Devona Abel]

What did this do?

Exactly from where?

Devona
  - Original Message - 
  From: Frederick 
  To: jaws-users-list@googlegroups.com 
  Sent: Monday, March 05, 2007 12:00 PM
  Subject: [JAWS-Users] Re: Getting the Greaters Out


  Hi

  Select the >>> and then press JAWS Plus D. then when the dialog box opens 
press enter. in the edit field you should see >>> if not type the grater signs 
here. tab to the next field and type space. next tab to OK and type enter. next 
exit by typing alt F. followed by x. and you should be rid of the >>> signs. 

  Note you may want to do the same for the double grater sign. Also you can 
assign a sound for these characters.

  God bless,
  Mark (Frederick)
  God loves you!
  My ham radio lists.
  http://lists.topica.com/lists/funhamradio.
  http://groups.google.com/group/funhamradio-list
  My personal website
  http://funhamradio.bloki.com
  - Original Message - 
  From: Linda 
  To: jaws-users-list@googlegroups.com 
  Sent: Monday, March 05, 2007 7:52 AM
  Subject: [JAWS-Users] Getting the Greaters Out


  Is there any way to stop jaws from reading greater greater greater when 
reading forwards?  I have jaws 8 and have my punctuation set to none.
  Linda

  

--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Jaws Video Intercept

[Denny Huff]

Hey!  Thanks!  I'll take a look at it when I get back there.

- Original Message - 
From: "Jeremiah Z. Rogers" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 4:07 PM
Subject: [JAWS-Users] Re: Jaws Video Intercept


>
> Hi Denny. The symptoms you describe are similar to those I've experienced 
> on
> several occasions on systems which have ATI video cards installed. Solving
> the problem involved setting the hardware accelleration to 100% instead of
> 20% on the card. This setting likely got reset when you removed and
> re-installed video drivers. Good luck chasing this one.
>
>
>
>
> Jeremiah Z. Rogers
> Wireless: 704-996-5334
> Email/Skype/MSN Messenger: [EMAIL PROTECTED]
> On the web: www.jzrogers.com
>
> -Original Message-
> From: jaws-users-list@googlegroups.com
> [mailto:[EMAIL PROTECTED] On Behalf Of Denny Huff
> Sent: Friday, March 16 8:07
> To: jaws-users-list@googlegroups.com
> Subject: [JAWS-Users] Re: Jaws Video Intercept
>
>
> OK, thanks!
> Denny
>
>
> -Original Message-
> From: jaws-users-list@googlegroups.com
> [mailto:[EMAIL PROTECTED] On Behalf Of Negoslav Sabev
> Sent: Friday, March 16, 2007 3:38 AM
> To: jaws-users-list@googlegroups.com
> Subject: [JAWS-Users] Re: Jaws Video Intercept
>
>
> I had simular problem before. First I can suggest to do a system restore 
> It
> may need some sighted person to do this since jaws might not read correct.
> If this doesn't help, try find and delete jawsvid.dll and when you do,
> install video intercept manager again. If this doesn't help either,
> uninstall jaws and someone should clean the registry of jaws and then
> reinstall it. It is complicated I know, but try this before reinstalling
> windows. I had to reinstall my OS. You might need sighted person to do 
> those
> things. I'm sure after all this, he'll never remove shared components.
> Negoslav
>
> Denny wrote
>
> I hope somebody can give me some direction to go with this.
> A client of mine installed Jaws version 8 with no problems after
> installation.
> He decided to uninstall some other versions of Jaws he had on his system 
> and
> started with version 5.1.
> Not knowing any better, he said yes to removing the shared components.
> After he did that, he keeps getting the Jaws video intercept message when 
> he
> starts Jaws 8.
> It's been with my experience that Jaws does not speak when you get this
> message, but his Jaws does not stop talking.
> Even when he enters on the execute to install the video intercept, it
> restarts his system and comes up speaking, but he still has the video
> intercept message.  He can close the video message and Jaws still speaks.
> If that were all there was to it, that would be OK, but when he uses his
> Jaws cursor, Jaws does not read anything at all, it just donks on him.
> Plus, in Word and Outlook, he cannot read by line, it just says blank.
> Although he can read by word by using the control left or right arrow.
> I have tried removing all versions of Jaws and reinstalling Jaws 8 with no
> success.  I also tried installing an earlier version of Jaws with the same
> results.
> I uninstalled the video intercept, but that didn't help either.  I have
> checked his display settings and they are correct.
> I uninstalled his video drivers and reinstalled them with no luck.
> I feel as though it is the video card itself, but am puzzled as to why
> uninstalling the shared components of Jaws would do that to a video card.
> So before I try a different video card I was hoping somebody would have a
> suggestion as to what to try next.
>
> Thanks,
>
> Denny
>
>
>
>
>
>
>
> > 


--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Voice Changes

[Kerryann Ifill]

Hi Ric,

Not totally sure how to answer your question.
All I can tell you is that JFW is running from system try. Does that help
any?

Kerry 

-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Rick Justice
Sent: Friday, March 16, 2007 3:15 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


Hi Kerryann,
Do you know if Jaws is running as a service, or an application when this
happens?
Rick
- Original Message -
From: "Kerryann Ifill" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, March 15, 2007 8:00 PM
Subject: [JAWS-Users] Re: Voice Changes


Hi Marilyn,

Thanks, but its a little more complicated than that.  But trust me; I tried
that too!
I think Jaws has decided to go on a work slow campaign in protest!

Kerry

  _

From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Marilyn Walker
Sent: Thursday, March 15, 2007 12:27 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


This may be too simple, but after you set your voices, di you continue to
tab down and enter "Ok?"  marilyn









--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Jaws Video Intercept

[Jeremiah Z. Rogers]

Hi Denny. The symptoms you describe are similar to those I've experienced on
several occasions on systems which have ATI video cards installed. Solving
the problem involved setting the hardware accelleration to 100% instead of
20% on the card. This setting likely got reset when you removed and
re-installed video drivers. Good luck chasing this one.

 


Jeremiah Z. Rogers
Wireless: 704-996-5334
Email/Skype/MSN Messenger: [EMAIL PROTECTED]
On the web: www.jzrogers.com
 
-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Denny Huff
Sent: Friday, March 16 8:07
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Jaws Video Intercept


OK, thanks!
Denny
 

-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Negoslav Sabev
Sent: Friday, March 16, 2007 3:38 AM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Jaws Video Intercept


I had simular problem before. First I can suggest to do a system restore It
may need some sighted person to do this since jaws might not read correct. 
If this doesn't help, try find and delete jawsvid.dll and when you do,
install video intercept manager again. If this doesn't help either,
uninstall jaws and someone should clean the registry of jaws and then
reinstall it. It is complicated I know, but try this before reinstalling
windows. I had to reinstall my OS. You might need sighted person to do those
things. I'm sure after all this, he'll never remove shared components.
Negoslav

Denny wrote

I hope somebody can give me some direction to go with this.
A client of mine installed Jaws version 8 with no problems after
installation.
He decided to uninstall some other versions of Jaws he had on his system and
started with version 5.1.
Not knowing any better, he said yes to removing the shared components.
After he did that, he keeps getting the Jaws video intercept message when he
starts Jaws 8.
It's been with my experience that Jaws does not speak when you get this
message, but his Jaws does not stop talking.
Even when he enters on the execute to install the video intercept, it
restarts his system and comes up speaking, but he still has the video
intercept message.  He can close the video message and Jaws still speaks.
If that were all there was to it, that would be OK, but when he uses his
Jaws cursor, Jaws does not read anything at all, it just donks on him.
Plus, in Word and Outlook, he cannot read by line, it just says blank.
Although he can read by word by using the control left or right arrow.
I have tried removing all versions of Jaws and reinstalling Jaws 8 with no
success.  I also tried installing an earlier version of Jaws with the same
results.
I uninstalled the video intercept, but that didn't help either.  I have
checked his display settings and they are correct.
I uninstalled his video drivers and reinstalled them with no luck.
I feel as though it is the video card itself, but am puzzled as to why
uninstalling the shared components of Jaws would do that to a video card.
So before I try a different video card I was hoping somebody would have a
suggestion as to what to try next.

Thanks,

Denny 







--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] forgot to change subject

[Barbara Bransky]

I guess I shouldn't have replied to this last e mail I sent. Barbara

--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: question

[Barbara Bransky]

thank you much John. Barbara
  - Original Message - 
  From: John Justice 
  To: jaws-users-list@googlegroups.com 
  Sent: Tuesday, March 13, 2007 6:32 PM
  Subject: [JAWS-Users] Re: question


  ☺Not a specific Jaws command that I'm aware of Barbara.  But there is an 
excellent find feature which is a part of Windows XP.  It's very capable, 
perhaps a bit too capable so read each step carefully.

FINDING A MISSING DOCUMENT USING WINDOWS FIND COMMAND:

  STEP 1.  Go to your Start Up option by pressing Windows key and the letter M.

  STEP 2:
  Press F for Find.

  STEP 3:  
  As you tab through the steps within this function, your computer should 
default to "Files or Folders"  as the first choice.

  STEP 4:
  If you remember all or part of the document name, type it in the Edit field 
provided.

  STEP 5:
  You may have to use Jaws Cursor for this but make sure that the right drive 
is selected.  I have several but most people have the A drive which is the 
floppy disk and the C drive which is your primary drive.  Make sure that the 
correct disk is highlighted.

  STEP 6:
  After typing the file or document name and stepping through to verify the 
drive, read each option carefully.  There is, for example, a check box which 
will search through hidden or subfolders as well as the main ones.  Another 
option will allow you to type in part of the text.  Try the file name first.

  STEP 7:  There is a button marked "Find Now"  and that's the one you 
choose.  If you have a large drive, this may take a few minutes depending on 
how fast your CPU  is and how large your drive capacity is.

  STEP 8:
  The files which are located, will be listed and to access each one, simply 
press Enter on it.  A separate window will open.  Occasionally, Windows might 
not recognize the type of software which created the file to begin with.  
WARNING!   Not all word processor files are accessible with Windows.  Most are 
but there are some exceptions like older Word Perfect files. 

  STEP 9:
  If your first attempt is not successful, go back and use some of the more 
advanced search capabilities.  The best way to learn how to use this tool is to 
play with it.  You can't hurt anything at all.  This function is completely 
non-invasive.  It simply searches the entire drive for something that resembles 
what you are looking for.

  STEP 10:
  There are many ways to capture the file once you've found it.  The best way 
is to just copy the highlighted file name, then paste it into a folder where 
you know you'll find it.  The alternative would be to open the file, then do a 
Highlight All (Control A) command and copy the entire contents onto your clip 
board.  Then, you can open a new file in whatever word processor you choose and 
paste the contents into that file.  Once you have done that, save your work 
using whatever file type you prefer.

  COMMENTS:
  I hope this helps you Barbara.  The most wonderful thing about the Find is 
its flexibility.  There are so many options you can choose.

  Good luck.

  John Justice   
- Original Message - 
From: Barbara Bransky 
To: jaws-users-list@googlegroups.com 
Sent: Monday, March 12, 2007 1:40 PM
Subject: [JAWS-Users] question


Hi all, if someone can help would be appreciated. I copied something from a 
website and put into a document in ms word and sent it to (My Documents). Well 
it disappeared. Can't find it so is there a command for jaws to find a 
document? thanks Barbara


--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Voice Changes

[Rick Justice]

Hi Kerryann,
Do you know if Jaws is running as a service, or an application when this 
happens?
Rick
- Original Message - 
From: "Kerryann Ifill" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, March 15, 2007 8:00 PM
Subject: [JAWS-Users] Re: Voice Changes


Hi Marilyn,

Thanks, but its a little more complicated than that.  But trust me; I tried
that too!
I think Jaws has decided to go on a work slow campaign in protest!

Kerry

  _

From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Marilyn Walker
Sent: Thursday, March 15, 2007 12:27 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Voice Changes


This may be too simple, but after you set your voices, di you continue to
tab down and enter "Ok?"  marilyn







--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Inactive Buttons in Jaws 8Re: [JAWS-Users] Re: Delete Key Stroke

[marcatony]

Hi
   The problem is that Jaws 8.0 doesn't read the same things that Jaws 7.0 
does.  If Jaws says a link is inactive, then it can't be clicked.

Marsha
- Original Message - 
From: "Baracco, Andrew W" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, March 15, 2007 11:20 AM
Subject: [JAWS-Users] Re: Inactive Buttons in Jaws 8Re: [JAWS-Users] Re: 
Delete Key Stroke



I have noticed this to, but in reality, the control is really active,
and JAWS is lying.  Next time you encounter that, disregard what JAWS
says and either press the spacebar or ENTER.

Andy


-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of marcatony
Sent: Wednesday, March 14, 2007 9:53 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Inactive Buttons in Jaws 8Re: [JAWS-Users] Re:
Delete Key Stroke


  I hope I can explain the problem so I can get some help.  When I was
using Jaws 7.0, I was able to click on some of the buttons to make
actions occur, such as spinning a prize wheel.  Now that I have
installed Jaws 8.0 I am no longer able to click on these same buttons
because there is a message which says button inactive.  I don't know
what settings to change because I didn't use the merge feature.  Does
anyone know what settings i should change so that I can spin the prize
wheels myself?  Thanks.

Marsha Anderson








--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Why is Jaws slow to speak?

[lawrence taylor]

Flor

Thanks for the info any ways. I haven't a clue where I placed my jaws 6 disk
and your instructions has saved me a bunch of time.
- Original Message - 
From: "Flor Lynch" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 7:01 AM
Subject: [JAWS-Users] Re: Why is Jaws slow to speak?


>
> A repair of JAWS6 can be done by:  Start menu, Programs; JAWS6; alt+t for
> Tools, then arrow to or hit i for Installation and maintenance.  In the
> ensuing dialogue, down-arrow to choose the Repair radiobutton, and
proceed.
> I don't think repairing JAWS will fix the slowness issue, since it would
> seem to be more computer-general related; but the above is how you repair
> earlier versions of JAWS up until recent versions.
>
> - Original Message - 
> From: "lawrence taylor" <[EMAIL PROTECTED]>
> To: 
> Sent: Friday, March 16, 2007 2:33 PM
> Subject: [JAWS-Users] Re: Why is Jaws slow to speak?
>
>
> thanks vicky
>
> It is an honor to be apart of such a smart group of people. I have my work
> cut out for me this week end indeed.
>   - Original Message - 
>   From: VICTORIA VAUGHAN
>   To: jaws-users-list@googlegroups.com
>   Sent: Friday, March 16, 2007 5:05 AM
>   Subject: [JAWS-Users] Re: Why is Jaws slow to speak?
>
>
>   May be someone else on this list will write if they know how to go in to
> the JAWS folders to initiate a repair.  The only way I know how to do
this,
> is to put your 6.0 disk back in and start an installation. 1 or 2 steps in
> to it, you will have a chance to click on Repair. Go ahead and click on
> Repair and see if that helps.
>
>   Beyond this, I think you'll need to contact Freedom Scientific for help.
>
>   I hope it works out for you! Vicky V
>
>
>
>
>
>
> >
>


--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Scripts for Internet TV?

[Demetry]

Hi listers,

I've downloaded the tool from JLC's home page. The program is very
interessting. But does anybody knows, where can I get the script for Jaws?

Thank you very much.
Demetry


--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Jaws stopped reading new message fields.

[Larry Stansifer]

Hi folks,
 
Recently Jaws 8.current quit reading the to field, CC field,
Bcc field and Subject field.
I can arrow around and get kind of an idea where I am but it
is as you know a pain to do that.
I am using Outlook xp on a windows xp home machine.
I made certain the window was maximized and ran the repair
utility.
 
Thanks in advance.
 

Regards


Larry Stansifer 

 

--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Why is Jaws slow to speak?

[Baracco, Andrew W]

Lawrence,
 
You might want to have a sighted person watch the screen when you are
booting up to see what messages appear.  Perhaps there is some kind of
utility running a scan.  You could try unplugging the external HD and
see if that makes a difference.  If there is some kind of hardware
problem, or a problem with  Windows itself, there may be an error
message on the screen.  As for MSCONFIG, it is a utility that allows you
to choose which programs run at startup.  Hit WINDOWS key-R to bring up
the "Run" dialogue.  Type msconfig and hit ENTER.  Under the "Startup"
tab, you will see a list of programs with checkboxes.  You can try
unchecking some of the programs.  It is hard to advise as to which ones
to uncheck, because the setup varies with different computers.  I
usually leave anything that says Microsoft checked, along with anything
that references your antivirus or internet security software.  After
making changes, tab to AND HIT enter  ON ok.  You will have to restart
the computer for changes to take effect.
 
Andy
 



From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of lawrence taylor
Sent: Thursday, March 15, 2007 11:33 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Why is Jaws slow to speak?


Hi Andy,
 
You have given me a galaxy of issues to ponder here of which I am very
grateful. The problem became noticeable here n the last couple of weeks.
I subscribe to the population that keeps their computer on at all times.
I was running into a problem with a piece of jaws friendly software that
allowed me to down load music and for some strange reason it started to
offer me their upgrade version which is not jaws friendly.
Unfortunately, I learn it was not very friendly after i tried their up
graded version or pro. Although i was able to successfully un install
the pro version and re install the old friendly version, things have not
been the same. 
I've scanned my system with AVg and there are no reported viruses. So I
will continue over the week end to explore the suggestions you've
referenced in your post. I am familiar with most of these tasks except
running MSCONFIG   Any guidance on that would be helpful. I did add an
exsternal drive back in December. 
 

- Original Message - 
From: Baracco, Andrew W   
To: jaws-users-list@googlegroups.com 
Sent: Thursday, March 15, 2007 11:45 AM
Subject: [JAWS-Users] Re: Why is Jaws slow to speak?


There are many possible reasons.  Is this a new problem?  Did
you change anything recently, I. e. install or remove programs?  did you
add any new hardware, like a second HD?  You might try having fewer
programs load at startup.  You can run MSCONFIG and uncheck unnecessary
entried in the startup tab.  If you have several programs in the sys
tray, try disabling some.  I once had this problem on an old computer,
and doing a disk defrag helped.  If none of these things help, it may be
a hardware issue, like a dying power supply or HD.  I doubt that JAWS
has anything to do with it.
 
Andy
 




From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of lawrence taylor
Sent: Thursday, March 15, 2007 12:35 PM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Why is Jaws slow to speak?


Hi Listers
 
Upon starting up my computer it takes jaws roughly 20 minutes
before it lets me know it is ready. I am using jaws 6.0 and XP home.Any
thoughts or suggestions. Is this an instance of needing to repair jaws?
If so can some one provide the steps. Thanks in advance for any help
regarding this matter.







--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Why is Jaws slow to speak?

[Flor Lynch]

A repair of JAWS6 can be done by:  Start menu, Programs; JAWS6; alt+t for 
Tools, then arrow to or hit i for Installation and maintenance.  In the 
ensuing dialogue, down-arrow to choose the Repair radiobutton, and proceed. 
I don't think repairing JAWS will fix the slowness issue, since it would 
seem to be more computer-general related; but the above is how you repair 
earlier versions of JAWS up until recent versions.

- Original Message - 
From: "lawrence taylor" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 2:33 PM
Subject: [JAWS-Users] Re: Why is Jaws slow to speak?


thanks vicky

It is an honor to be apart of such a smart group of people. I have my work 
cut out for me this week end indeed.
  - Original Message - 
  From: VICTORIA VAUGHAN
  To: jaws-users-list@googlegroups.com
  Sent: Friday, March 16, 2007 5:05 AM
  Subject: [JAWS-Users] Re: Why is Jaws slow to speak?


  May be someone else on this list will write if they know how to go in to 
the JAWS folders to initiate a repair.  The only way I know how to do this, 
is to put your 6.0 disk back in and start an installation. 1 or 2 steps in 
to it, you will have a chance to click on Repair. Go ahead and click on 
Repair and see if that helps.

  Beyond this, I think you'll need to contact Freedom Scientific for help.

  I hope it works out for you! Vicky V






--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Jaws Video Intercept

[Negoslav Sabev]

Welcome!
Before changing the registry please make a copy of it's files or export it
to a reg file. If he needs to reinstall windows, I just want to remind to
copy important information such as documents, addressbook, e-mails etc from
the main drive.
Wish you good luck with this mess. I know what you're in.
Negoslav

Original message:

OK, thanks!
Denny


--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Why is Jaws slow to speak?

[lawrence taylor]

thanks vicky

It is an honor to be apart of such a smart group of people. I have my work cut 
out for me this week end indeed.
  - Original Message - 
  From: VICTORIA VAUGHAN 
  To: jaws-users-list@googlegroups.com 
  Sent: Friday, March 16, 2007 5:05 AM
  Subject: [JAWS-Users] Re: Why is Jaws slow to speak?


  May be someone else on this list will write if they know how to go in to the 
JAWS folders to initiate a repair.  The only way I know how to do this, is to 
put your 6.0 disk back in and start an installation. 1 or 2 steps in to it, you 
will have a chance to click on Repair. Go ahead and click on Repair and see if 
that helps.

  Beyond this, I think you'll need to contact Freedom Scientific for help.

  I hope it works out for you! Vicky V

  

--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Why is Jaws slow to speak?

[David Ferrin]

Actually you are quite correct on that point.
David Ferrin
[EMAIL PROTECTED]
- Original Message - 
From: "VICTORIA VAUGHAN" <[EMAIL PROTECTED]>
To: 
Sent: Friday, March 16, 2007 9:05 AM
Subject: [JAWS-Users] Re: Why is Jaws slow to speak?


May be someone else on this list will write if they know how to go in to the 
JAWS folders to initiate a repair.  The only way I know how to do this, is 
to put your 6.0 disk back in and start an installation. 1 or 2 steps in to 
it, you will have a chance to click on Repair. Go ahead and click on Repair 
and see if that helps.

Beyond this, I think you'll need to contact Freedom Scientific for help.

I hope it works out for you! Vicky V



--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Why is Jaws slow to speak?

[VICTORIA VAUGHAN]

May be someone else on this list will write if they know how to go in to the 
JAWS folders to initiate a repair.  The only way I know how to do this, is to 
put your 6.0 disk back in and start an installation. 1 or 2 steps in to it, you 
will have a chance to click on Repair. Go ahead and click on Repair and see if 
that helps.

Beyond this, I think you'll need to contact Freedom Scientific for help.

I hope it works out for you! Vicky V
--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Jaws Video Intercept

[Denny Huff]

OK, thanks!
Denny
 

-Original Message-
From: jaws-users-list@googlegroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Negoslav Sabev
Sent: Friday, March 16, 2007 3:38 AM
To: jaws-users-list@googlegroups.com
Subject: [JAWS-Users] Re: Jaws Video Intercept


I had simular problem before. First I can suggest to do a system restore It
may need some sighted person to do this since jaws might not read correct. 
If this doesn't help, try find and delete jawsvid.dll and when you do,
install video intercept manager again. If this doesn't help either,
uninstall jaws and someone should clean the registry of jaws and then
reinstall it. It is complicated I know, but try this before reinstalling
windows. I had to reinstall my OS. You might need sighted person to do those
things. I'm sure after all this, he'll never remove shared components.
Negoslav

Denny wrote

I hope somebody can give me some direction to go with this.
A client of mine installed Jaws version 8 with no problems after
installation.
He decided to uninstall some other versions of Jaws he had on his system and
started with version 5.1.
Not knowing any better, he said yes to removing the shared components.
After he did that, he keeps getting the Jaws video intercept message when he
starts Jaws 8.
It's been with my experience that Jaws does not speak when you get this
message, but his Jaws does not stop talking.
Even when he enters on the execute to install the video intercept, it
restarts his system and comes up speaking, but he still has the video
intercept message.  He can close the video message and Jaws still speaks.
If that were all there was to it, that would be OK, but when he uses his
Jaws cursor, Jaws does not read anything at all, it just donks on him.
Plus, in Word and Outlook, he cannot read by line, it just says blank.
Although he can read by word by using the control left or right arrow.
I have tried removing all versions of Jaws and reinstalling Jaws 8 with no
success.  I also tried installing an earlier version of Jaws with the same
results.
I uninstalled the video intercept, but that didn't help either.  I have
checked his display settings and they are correct.
I uninstalled his video drivers and reinstalled them with no luck.
I feel as though it is the video card itself, but am puzzled as to why
uninstalling the shared components of Jaws would do that to a video card.
So before I try a different video card I was hoping somebody would have a
suggestion as to what to try next.

Thanks,

Denny 




--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Register Jaws 8

[Geno69]

Mamta,
You noted: "yes I want to authorize it. Can you give me the step by step
procedure?"
Geno: there is one of two ways. First contact the Freedom Scientific Company
directly and they will walk you through it or send you a attachment and just
use it to do so. The other is first removing the Jaws 8 off the machine.
Then, reinstall. You will need a burner/player combo or a burner to put the
Jaws 8 & authorization disc in when it ask for it you will remove the Jaws 8
disc and then put in the disc to install your authorization. This may
require some sight if you run into problems. Though if you follow the steps
that Jaws 8 gives you at the right time. It is pretty straight forward. The
number just needs to make sure there. Anyway, after that is done remove that
disc and put back in the jaws 8 disc and continue.
Just follow all the steps given by the Jaws 8 disc in it's installing
process.
As, noted the easiest is calling Freedom Scientific and they will send a
attachment and they will tell you what to do.
Hope that will help you.
I chose the manual install instead of the automatic install. When installing
Jaws 8. 


--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---

[JAWS-Users] Re: Jaws Video Intercept

[Negoslav Sabev]

I had simular problem before. First I can suggest to do a system restore It 
may need some sighted person to do this since jaws might not read correct. 
If this doesn't help, try find and delete jawsvid.dll and when you do, 
install video intercept manager again. If this doesn't help either, 
uninstall jaws and someone should clean the registry of jaws and then 
reinstall it. It is complicated I know, but try this before reinstalling 
windows. I had to reinstall my OS. You might need sighted person to do those 
things. I'm sure after all this, he'll never remove shared components.
Negoslav

Denny wrote

I hope somebody can give me some direction to go with this.
A client of mine installed Jaws version 8 with no problems after
installation.
He decided to uninstall some other versions of Jaws he had on his system and
started with version 5.1.
Not knowing any better, he said yes to removing the shared components.
After he did that, he keeps getting the Jaws video intercept message when he
starts Jaws 8.
It's been with my experience that Jaws does not speak when you get this
message, but his Jaws does not stop talking.
Even when he enters on the execute to install the video intercept, it
restarts his system and comes up speaking, but he still has the video
intercept message.  He can close the video message and Jaws still speaks.
If that were all there was to it, that would be OK, but when he uses his
Jaws cursor, Jaws does not read anything at all, it just donks on him.
Plus, in Word and Outlook, he cannot read by line, it just says blank.
Although he can read by word by using the control left or right arrow.
I have tried removing all versions of Jaws and reinstalling Jaws 8 with no
success.  I also tried installing an earlier version of Jaws with the same
results.
I uninstalled the video intercept, but that didn't help either.  I have
checked his display settings and they are correct.
I uninstalled his video drivers and reinstalled them with no luck.
I feel as though it is the video card itself, but am puzzled as to why
uninstalling the shared components of Jaws would do that to a video card.
So before I try a different video card I was hoping somebody would have a
suggestion as to what to try next.

Thanks,

Denny 


--~--~-~--~~~---~--~~
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Address for the list archives:
http://www.mail-archive.com/jaws-users-list%40googlegroups.com/
In order to contact the management team simply fill out the following form 
found at:
http://www.jaws-users.com/contact.php
  You received this message because you are subscribed to the Google Groups 
"JAWS Users List" group.
To post to this group, send email to 
jaws-users-list@googlegroups.com
To unsubscribe from this group, send email to 
[EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jaws-users-list?hl=en
-~--~~~~--~~--~--~---