[kicad-users] Re: Removing inner pads with vias
--- In kicad-users@yahoogroups.com, kajdas <[EMAIL PROTECTED]> wrote: > > Yes, I did that, I use standard vias, 0.01 drill. 0.025 pad, no >micro, no buried, no blind. > I just need to specify different pad size (or remove) on inner layer. > I'd suggest making the via sizes an odd-ball number, say 0.026". That's close to the 0.025" you're already using and shouldn't cause any problems on the outer layers. It does, though, give you a unique Gerber aperture which will make it easy to strip them from the inner layer Gerbers. Note the aperture number in the table and search for the corresponding 'D##*' line in the file. You'd then just delete all of the lines from it down to the next 'D##*' line. Another option would be to use a Gerber editor to strip the vias from the inner layers. My personal preference is ViewMasterEZ. (about $50 from www.pentalogix.com) Regards, Bob
Re: [kicad-users] Removing inner pads with vias
Yes, I did that, I use standard vias, 0.01 drill. 0.025 pad, no micro, no buried, no blind. I just need to specify different pad size (or remove) on inner layer. Mike Sharkey <[EMAIL PROTECTED]> wrote: > I'm not sure how to go back and correct, but when you initially setup your > Via parameters Dimensions->Tracks_and_Vias you can use the radio buttons > to select which vias you're talking about, either Standard Via, Blind Via, > or Burried Via.
Re: [kicad-users] Re: Removing inner pads with vias
www.4pcb.com Doug Deeds <[EMAIL PROTECTED]> wrote: > Just out of curiousity, who is your board house? > Doug > > --- In kicad-users@yahoogroups.com, "mkajdas" <[EMAIL PROTECTED]> wrote: > > > > My PCB house DRC check complains about vias having pads on inner layers. > > How to have via pads on the outside and no pads inside the board on 4 > > layer board? > > The inner pads are not connected to anything and do not hurt anything > > but I get over 500 errors that I want to clean up. > > Martin > > > >
[kicad-users] Re: Removing inner pads with vias
Just out of curiousity, who is your board house? Doug --- In kicad-users@yahoogroups.com, "mkajdas" <[EMAIL PROTECTED]> wrote: > > My PCB house DRC check complains about vias having pads on inner layers. > How to have via pads on the outside and no pads inside the board on 4 > layer board? > The inner pads are not connected to anything and do not hurt anything > but I get over 500 errors that I want to clean up. > Martin >
Re: [kicad-users] Removing inner pads with vias
I'm not sure how to go back and correct, but when you initially setup your Via parameters Dimensions->Tracks_and_Vias you can use the radio buttons to select which vias you're talking about, either Standard Via, Blind Via, or Burried Via. Mike Sharkey Pike Aerospace Research Corporation www.pikeaero.com > Hi, > I am not sure that this is possible. Vias and through hole components > have pad for every layer. Try to edit the files with a Gerber editor and > trim the pads . Could you send a visual representation of the DRC ? Most > likely you will have to rework the problem zones. > Regards > > > On Fri, 2008-05-16 at 22:46 +, mkajdas wrote: >> My PCB house DRC check complains about vias having pads on inner >> layers. >> How to have via pads on the outside and no pads inside the board on 4 >> layer board? >> The inner pads are not connected to anything and do not hurt anything >> but I get over 500 errors that I want to clean up. >> Martin >> >> >> >> >> > >