Re: [kicad-users] Postscript Output

2008-04-26 Thread jean-pierre charras
sadkra a écrit :
 Hello Everyone,

 I just finished my first sch-pcb project in Kicad. 

 I tried to output the pcb in Postscript format. When I looked 
 carefully at the Postscript file, I found that some of the pads are 
 missing /or some pads are only half drawn in bottom-copper layer 
 while bottom-copper mask shows the complete pad-mask.

 I may add that gerber output of the same pcb is fine without any 
 problems.

 It will be of great help if someone throws any light on this.
   
Postscript output has a bug: after drawing oblong pads, some next drawings can 
be incorrectly drawn (bad size)
This old bug is now solved (Postscript output will be Ok in next release, 
coming soon)

Can you confirm you have oblong pads on your board ?


Jean-Pierre CHARRAS

Maître de conférences
Directeur d'études 2ieme année.
Génie Electrique et Informatique Industrielle 2
Institut Universitaire de Technologie 1 de Grenoble
BP 67, 38402 St Martin d'Heres Cedex

Recherche :
GIPSA-LIS - INPG
46,  Avenue Félix Viallet
38031 Grenoble cedex




Re: [kicad-users] Postscript Output

2008-04-25 Thread Dan Andersson
On Thursday 24 April 2008 20:26:28 sadkra wrote:
 Hello Everyone,

 I just finished my first sch-pcb project in Kicad.

 I tried to output the pcb in Postscript format. When I looked
 carefully at the Postscript file, I found that some of the pads are
 missing /or some pads are only half drawn in bottom-copper layer
 while bottom-copper mask shows the complete pad-mask.

 I may add that gerber output of the same pcb is fine without any
 problems.

 It will be of great help if someone throws any light on this.

 regards,
 sam_des

The postscript output is NOT for PCB making!!!

If you need Postscript for PCB making, use a Gerber Viewer and make a 
Postscript output from it.

You can't trust anything but the Gerber file.

//Dan, M0DFI


[kicad-users] Postscript Output

2008-04-24 Thread sadkra
Hello Everyone,

I just finished my first sch-pcb project in Kicad. 

I tried to output the pcb in Postscript format. When I looked 
carefully at the Postscript file, I found that some of the pads are 
missing /or some pads are only half drawn in bottom-copper layer 
while bottom-copper mask shows the complete pad-mask.

I may add that gerber output of the same pcb is fine without any 
problems.

It will be of great help if someone throws any light on this.

regards,
sam_des