[leaf-user] wisp-dist ... Client cannot "hear" AP
I have set up an two wisp-dists ... one as AP and one As Client ( managed mode ). I double checked all the routes and subnets the AP shows active association of the client. The client shows association to the AP I run "tcpdump -i netcs0" and can see the AP is hearing the client but the client is not hearing anything coming from the AP. Thus, no data can go across the link. I am using the teletronics 100mW cards on the 486 SBC. I tried the pigtale in the second slot ( farthest away from LED's ) and then the AP could not connect to anything. both the client and AP shows a radio association. But the client shows no traffic being received at all when I am sending pings to it from the AP. The AP can hear the arp requests and the pings from the client. I have tried wisp-dist builds 2312 and 2324. Am I missing something obvious here? Any suggestions? thanx --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] wisp-dist ... Client cannot "hear" AP
Looks like your PCMCIA controller needs special settings to make it work. Check if there are any interrupts for wireless card in /proc/interrupts. /etc/init.d/pcmcia already knows about some weird PCMCIA controllers, so try adding yours - search for the line which mentions Teletronics boards. [EMAIL PROTECTED] wrote: > I have set up an two wisp-dists ... one as AP and one As Client ( managed mode ). > > I double checked all the routes and subnets > > the AP shows active association of the client. > The client shows association to the AP > > I run "tcpdump -i netcs0" and can see the AP is hearing the client but the client is >not > hearing anything coming from the AP. Thus, no data can go across the link. > > I am using the teletronics 100mW cards on the 486 SBC. > > I tried the pigtale in the second slot ( farthest away from LED's ) and then the AP > could not connect to anything. > > both the client and AP shows a radio association. But the client shows no traffic > being received at all when I am sending pings to it from the AP. > > The AP can hear the arp requests and the pings from the client. -- Best Regards, Vladimir Systems Engineer (RHCE) --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] wisp-dist ... Client cannot "hear" AP
I have determined it is specifically build (2324) that is giving me the problem. with build 2312 the AP mode worked. with build 2324 it did not ( I could not get any cards including a lucent silver card to connect to the AP ) I created an .img and burned to flash with the latest build 2341 and it is working as well. I checked the interrupts and found they were assigned irq 10. I don't know what was causing the problem yet ... On 21 Sep 2002 at 15:21, Vladimir I. wrote: > Looks like your PCMCIA controller needs special settings to make it work. > > Check if there are any interrupts for wireless card in > /proc/interrupts. /etc/init.d/pcmcia already knows about some weird > PCMCIA controllers, so try adding yours - search for the line which > mentions Teletronics boards. > > [EMAIL PROTECTED] wrote: > > I have set up an two wisp-dists ... one as AP and one As Client ( managed mode ). > > > > I double checked all the routes and subnets > > > > the AP shows active association of the client. > > The client shows association to the AP > > > > I run "tcpdump -i netcs0" and can see the AP is hearing the client but the client >is not > > hearing anything coming from the AP. Thus, no data can go across the link. > > > > I am using the teletronics 100mW cards on the 486 SBC. > > > > I tried the pigtale in the second slot ( farthest away from LED's ) and then the >AP > > could not connect to anything. > > > > both the client and AP shows a radio association. But the client shows no traffic > > being received at all when I am sending pings to it from the AP. > > > > The AP can hear the arp requests and the pings from the client. > --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] wisp-dist ... Client cannot "hear" AP
[EMAIL PROTECTED] wrote about "Re: [leaf-user] wisp-dist ... Client cannot "hear" AP": > I have determined it is specifically build (2324) that is giving me the problem. > > with build 2312 the AP mode worked. with build 2324 it did not ( I could not get >any > cards including a lucent silver card to connect to the AP ) Ah, ok. Some of the test builds were broken. Don't remember which ones exactly right now. > I created an .img and burned to flash with the latest build 2341 and it is working >as > well. It's not latest anymore :-) New public release, build 2348, should be released on the LEAF's homepage very soon. -- Best Regards, Vladimir Systems Engineer (RHCE) --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
